Efeitos de fungicidas alternativos em folhas de Carthamus tinctorius L. (Asteraceae), potencial espécie para cultivo em agricultura familiar

The currently main development model on global society is driven by an economic rationality that endangers the environment and social justice. More and more, attention to this way of production and consumption is increasing, boosting research for sustainable development, with an environmental rationality that can harmonize nature preservation and welfare of all socioeconomic classes. One of the efforts on this sense is changing the sources supplying the energy demand, replacing fossil fuels for renewable and cleaner sources, such as biofuels. Carthamus tinctorius (safflower) is an oilseed crop with potential for biodiesel production, with good oil yield and chemical profile, allied to good adaptation to climates such like the northeastern semiarid lands of Brazil. With public policies fomentation, the use of this species may be an interesting alternative for family farming. In farming in general, the use of pesticides to prevent and combat diseases and plagues is common, which is not a sustainable practice. Thus, there are researched alternative, less dangerous substances. In this study, it was aimed to assess if neem (Azadirachta indica) leaf extract (20% m/v) and Bordeaux mixture (copper sulfate) have effects on safflower. It was also aimed to verify acceptance of farmers on safflower crop in Apodi, a municipality in Rio Grande do Norte state, Brazil, in view of it being localized in the aimed region for this crop cultivation. Besides that, understanding that the farmers’ knowledge and inclination to adopt the crop is fundamental for the introduction of this species and socioeconomic growth due to its exploration. In addition, a booklet with basic information on safflower was produced. In the field experiment, the fungicides were pulverized on plants cultivated in field experimental plots, with collection of leaf samples for analysis on anatomy, cuticle, and epicuticular wax morphology, the protective layer that interfaces with the surrounding ambient. In Apodi, forty-five farmers from Potiguar Cooperative of Apiculture and Sustainable Rural Development (COOPAPI) underwent semi-structured interviews, which also addressed their assessment on currently cultivated crops and perception of pesticide uses and sustainable alternatives. After comparing using analysis of variance, it was found that there was no difference between treatments in the experiment, as well as no anatomical or morphological modifications. Safflower acceptation among farmers was wide, with 84% of interviewees believing in a perspective of good incomes. The current scenario, comprised of low crop diversity, fragile in face of droughts and plagues, can partially explain this opinion. The booklet was effective in catching people attention for the species potential. There was wide acknowledgement on the importance of alternative pesticides, justified by health security. Based on the assessed parameter in the results of this research, the treatments here utilized may be recommended as fungicides for safflower. Given the crop susceptibility to fungi in heavy rainy period, it is advised that its potential introduction on the region shall be focused on semiarid areas.

O ouro branco abre caminho: o algodão e a modernização do espaço urbano da Cidade da Parahyba (1850-1924)

The present research deals with the modernization process of the Cidade da Parahyba2, between 1850 and 1924, and its relation with the cotton economy, which represented the main source of wealth accumulation for both the private and the public sectors throughout the First Republic. This study on urban history was developed by focusing on the understanding of the city s spatial formation, and despite its emphasis on the economic aspects involved, other factors that also contribute to the development of the social life were not put aside. The modernization process of the Cidade da Parahyba was also analyzed during the period established for the study according to a chronological and thematic approach that established comparisons with the financial situation of the State, whenever this was necessary, with special attention to the contribution of the cotton economy to the State´s revenues. It was possible to detect a lack of financial help and loans from the federal and municipal administrations for finishing several public works already underway in the capital, since the federal funds allocated to the State of Parahyba do Norte were rather employed in emergency works against droughts and in agricultural development. One can then conclude that the financial resources required for the urban interventions were withdrawn from the State s treasury itself, resources that were collected mainly from activities such as cotton exportation and cotton trading. Another factor shows the interdependence between the urban remodeling and the cotton economy: during the years marked by great droughts or by hard plagues on the cotton plantations, cotton production decreased, as well as the State s finances. The first measures taken by the State s administrators were to halt all projects of urban remodeling in progress in the Cidade da Parahyba, which was, clearly, the most privileged city by the State s presidents during the period analyzed. 2 The city of João Pessoa was named Cidade da Parahyba, a designation that remained until September 1930, when it received its present-day name in order to pay homage to the president of the State, João Pessoa Cavalcanti de Albuquerque, murdered in the city of Recife in August of that same year. At that time, the State of Paraíba was known as Parahyba do Norte. Since this work is limited to a period of time comprised within the First Republic, the names employed respect the terms used in those days

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Variação de temperatura e umidade e suas influências nas características físicas e mecânicas dos fios de algodão

Cotton is a hydrofilic textile fiber and, for this reason, it changes its properties according to the environment changes. Moisture and Temperature are the two most important factors that lead a cotton Spinning sector and influence its quality. Those two properties can change the entire Spinning process. Understanding this, moisture and temperature must be kept under control when used during the Spinning process, once the environment is hot and dry, the cotton yarns absorb moisture and lose the minimal consistency. According to this information, this paper was developed testing four types of cotton yarns, one kind of cotton from Brazil and the others from Egypt. The yarns were exposed to different temperatures and moisture in five different tests and in each test, six samples that were examined through physical and mechanical tests: resistance, strength, tenacity, yarn´s hairness, yarn´s evenness and yarn´s twisting. All the analysis were accomplished at Laboratório de Mecânica dos Fluídos and at COATS Corrente S.A., where, it was possible to use the equipments whose were fundamental to develop this paper, such as the STATIMAT ME that measures strength, tenacity, Zweigler G566, that measure hairiness in the yarn, a skein machine and a twisting machine. The analysis revealed alterations in the yarn´s characteristics in a direct way, for example, as moisture and temperature were increased, the yarn´s strength, tenacity and hairness were increased as well. Having the results of all analysis, it is possible to say that a relatively low temperature and a high humidity, cotton yarns have the best performance

Adaptabilidade de híbridos entre Gossypium barbadense E G. hirsutum N contendo o gene cry1Ac

Hybrids among transgenic plants and related species are expected to occur if they are sympatric and when there are not crossing barriers; as is the case, in Brazil, of cry1Ac transgenic cotton and Gossypium barbadense. This species has been maintained as dooryard plants, and should be preserved as a genetic resource. Hybrids were evaluated about traits related to fitness, leading to infer about its chances of survivor and selection. A barbadense genotype collected at the state of Mato Grosso was outcrossed to the variety DP 404, containing the gene cry1Ac, and to the isoline DP 404. All the F1 individuals and 122 among 170 F2 individuals expressed the toxin, and presented levels of resistance to pink bollworm (Pectinophora gossypiella) and cotton leafworm (Alabama argillacea) equivalent to the transgenic parent and superior to the isoline, barbadense or non transgenic hybrids. The percentage of germination and number of days to germinate did not differ among genotypes. Anthesis of the first flower and opening of the first cotton boll occurred earlier for herbaceous cotton and F1 hybrids than F2 population in average; all the populations presented a number of days to flower and opening of the first boll smaller then barbadense. The highest plants were barbadenses, and herbaceus the smallest, with F1 and F2 populations presenting intermediary heights. The number of seeds per plants were superior for F1 hybrids an herbaceous cotton, F2 populations were in average intermediary; the barbadense genotype produced the smallest number of seeds per plant. Pink bollworm, mainly, and also cotton leafworm, are important barbadense pests, so the transgene positive effect could favor the selection of hybrids, and hence G. hirsutum genome, against the maintenance of pure G. barbadense genome. The selection may be influenced by the plant uses: the smaller size of hybrids when compared to the barbadense may lead them to be differentiated from these parents to which medicinal properties are attributed; on the other hand, the greater boll production may favor hybrids maintenance with the purpose of producing lamp wicks, or use as an ornamental or swab

Avaliação da estabilidade térmica e oxidativa do biodiesel de algodão e do efeito da adição de antioxidantes (α-tocoferol e BHT)

This work aims to study the effects of adding antioxidants, such as, α- tocopherol and BHT on the thermal and oxidative stability of biodiesel from cottonseed (B100). The Biodiesel was obtained through the methylical and ethylical routes. The main physical and chemical properties of cotton seed oil and the B100 were determined and characterized by FTIR and GC. The study of the efficiency of antioxidants, mentioned above, in concentrations of 200, 500, 1000, 1500, 2000ppm, to thermal and oxidative stability, was achieved by Thermogravimetry (TG), Differential Thermal Analysis (DTA), Differential Scanning Calorimetry (DSC), Differential Scanning Calorimetry - Hi-Pressure (P-DSC) and Rancimat. The Biodiesel obtained are within the specifications laid down by Resolution of ANP No7/2008. The results of TG curves show that the addition of both antioxidants, even in the lowest concentration, increases the thermal stability of Biodieseis. Through the DTA and DSC it was possible to study the physical and chemical transitions occurred in the process of volatilization and decomposition of the material under study. The initial time (OT) and temperature (Tp) of oxidation were determined through the P-DSC curve and they showed that the α-tocopherol has a pro-oxidant behavior for some high concentrations. The BHT showed better results than the α-tocopherol, with regard to the resistance to oxidation

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

O ouro branco abre caminho: o algodão e a modernização do espaço urbano da Cidade da Parahyba (1850-1924)

The present research deals with the modernization process of the Cidade da Parahyba2, between 1850 and 1924, and its relation with the cotton economy, which represented the main source of wealth accumulation for both the private and the public sectors throughout the First Republic. This study on urban history was developed by focusing on the understanding of the city s spatial formation, and despite its emphasis on the economic aspects involved, other factors that also contribute to the development of the social life were not put aside. The modernization process of the Cidade da Parahyba was also analyzed during the period established for the study according to a chronological and thematic approach that established comparisons with the financial situation of the State, whenever this was necessary, with special attention to the contribution of the cotton economy to the State´s revenues. It was possible to detect a lack of financial help and loans from the federal and municipal administrations for finishing several public works already underway in the capital, since the federal funds allocated to the State of Parahyba do Norte were rather employed in emergency works against droughts and in agricultural development. One can then conclude that the financial resources required for the urban interventions were withdrawn from the State s treasury itself, resources that were collected mainly from activities such as cotton exportation and cotton trading. Another factor shows the interdependence between the urban remodeling and the cotton economy: during the years marked by great droughts or by hard plagues on the cotton plantations, cotton production decreased, as well as the State s finances. The first measures taken by the State s administrators were to halt all projects of urban remodeling in progress in the Cidade da Parahyba, which was, clearly, the most privileged city by the State s presidents during the period analyzed. 2 The city of João Pessoa was named Cidade da Parahyba, a designation that remained until September 1930, when it received its present-day name in order to pay homage to the president of the State, João Pessoa Cavalcanti de Albuquerque, murdered in the city of Recife in August of that same year. At that time, the State of Paraíba was known as Parahyba do Norte. Since this work is limited to a period of time comprised within the First Republic, the names employed respect the terms used in those days

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Índices de obesidade central e fatores de risco cardiovascular na síndrome dos ovários policísticos

Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF

O algodão sem veneno do assentamento queimadas, na Paraíba: agentes sociais, alinhamento em rede, produção e comercialização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Efeito inseticida de vicilinas isoladas de sementes de erythrina velutina em condições de semi-campo para moscas das frutas (ceratitis capitata)

Chitin-binding vicilins from legume seeds (Erythrina velutina. Canavalia ensiformes and Phaseolus vulgares) were isolated by ammonium sulfate followed by affinity chromatography on a chitin column. Effect of these vicilins on female adults of Ceratitis capitata was examined by bioassay and in a semi-field assay model. Mechanism of action of the vicilins was determined by in vivo digestibility and chitin affinity. Among the tested vicilins, E. velutina when added to diet caused strong effect on mortality at 10% dose. This insecticidal property was tested in a semi-field assay which showed the same effect observed in laboratory conditions, where doses of 10% and 15% were lethal to female adults of C. capitata. These deleterious effects were not only associated to the binding to chitin structures present in peritrophic membrane, but principally to its low digestibility in the C. capitata digestive tract. This fact was confirmed because chiting binding proteins as WGA and the other tested vicilins were not toxic to female adults of C. capitata due susceptibility of these proteins to digestive enzymes of the insects. By other side EvV was more resistant to digestive enzymes, causing deleterious effects on female adults of C. capitata. These results showed that EvV may be part of the pest management programs or an alternative in plant improvement program in the population control of this fruticulture pest

Modulação da expressão da proteína XPA em resposta ao tratamento com azul de metileno fotossensibilizado

Reactive oxygen species (ROS) are produced by aerobic metabolism and react with biomolecules, such as lipids, proteins and DNA. In high concentration, they lead to oxidative stress. Among ROS, singlet oxygen (1O2) is one of the main ROS involved in oxidative stress and is one of the most reactive forms of molecular oxygen. The exposure of some dyes, such as methylene blue (MB) to light (MB+VL), is able to generate 1O2 and it is the principle involved in photodynamic therapy (PDT). 1O2 e other ROS have caused toxic and carcinogenic effects and have been associated with ageing, neurodegenerative diseases and cancer. Oxidative DNA damage is mainly repaired by base excision repair (BER) pathway. However, recent studies have observed the involvement of nucleotide excision repair (NER) factors in the repair of this type of injury. One of these factors is the Xeroderma Pigmentosum Complementation Group A (XPA) protein, which acts with other proteins in DNA damage recognition and in the recruitment of other repair factors. Moreover, oxidative agents such as 1O2 can induce gene expression. In this context, this study aimed at evaluating the response of XPA-deficient cells after treatment with photosensitized MB. For this purpose, we analyzed the cell viability and occurrence of oxidative DNA damage in cells lines proficient and deficient in XPA after treatment with MB+VL, and evaluated the expression of this enzyme in proficient and complemented cells. Our results indicate an increased resistance to treatment of complemented cells and a higher level of oxidative damage in the deficient cell lines. Furthermore, the treatment was able to modulate the XPA expression up to 24 hours later. These results indicate a direct evidence for the involvement of NER enzymes in the repair of oxidative damage. Besides, a better understanding of the effects of PDT on the induction of gene expression could be provided

Processo biotecnológico voltado a produção de estoques poliploides do camarão-branco litopenaeus vannamei (decapoda, penaeidae)

without practical results so far. Protocols used in biotechnological cultured aquatic organisms aimed at increasing growth rates and disease resistance, have been studied and perfected. Among the available techniques, the application of chromosomal manipulation, although still nascent, is presented as a tool aimed at mitigating ecological and economical issues in shrimp farming. The polyploidization artificial method already employed in fish and shellfish, has been widely researched for use in farmed shrimp. Some limitations of this method of expansion in shrimp refer to a better knowledge of cytogenetic aspects, the level of sexual dimorphism and performance in growing conditions. To contribute on some of these issues, the present study aimed to characterize cytogenetic species Litopenaeus vannamei (Decapoda) and Artemia franciscana (Anostraca), analyze the effectiveness of methods for detection of ploidy, through the use of flow cytometry in processes of induction polyploidy cold thermal shock at different stages of development of newly fertilized eggs. Additionally, aimed also the qualitative and quantitative comparison of larval development between diploid and polyploid organisms, besides the identification of sexual dimorphism in L. vannamei, through geometric morphometrics. The results provide information relevant to the improvement and widespread use of biotechnological methods applied toward national productivity in shrimp farming