Mecanismos de desgaste, história térmica e ciclo de vida de componentes de um motor de combustão interna de aeromodelo

We developed an assay methodology that considered the temperature variation and the scanning electron microscopy as a method to quantify and characterize respectively the consumption evolution in three 46 LA machines, with internal combustion and two-stroke engines, 7.64 cm3 cylinder capacity, 23.0 millimeters diameter and 18.4 millimeters course, RPM service from 2.000 to 16.000 rpm, 1.2 HP power, and 272 grams weight. The investigated engines components were: (1) head of the engine (Al-Si alloy), (2) piston (Al-Si alloy) and (3) piston pin (AISI 52100 steel). The assays were carried out on a desktop; engines 1 and 2 were assayed with no load, whereas in two assays of engine 3 we added a fan with wind speed that varied from 8.10 m/s to 11.92 m/s, in order to identify and compare the engine dynamic behavior as related to the engines assayed with no load. The temperatures of the engine s surface and surroundings were measured by two type K thermopairs connected to the assay device and registered in a microcomputer with data recording and parameters control and monitoring software, throughout the assays. The consumed surface of the components was analyzed by scanning electron microscopy (SEM) and microanalysis-EDS. The study was complemented with shape deformation and mass measurement assays. The temperature variation was associated with the oxides morphology and the consumption mechanisms were discussed based on the relation between the thermal mechanical effects and the responses of the materials characterization

Foraminíferos, ostracodes e microfauna associada da plataforma continental equatorial norte-rio-grandense, NE Brasil: área Porto do Mangue a Galinhos

This study was conducted in the adjacent Brazilian equatorial inner shelf to Rio Grande do Norte, between the region of Porto do Mangue and Galinhos. The main objective is the characterization of biogenic sediments, especially foraminifera and ostracod collected on the surface of the seafloor. The methodology involved standard procedures including literature, surveys, processing of samples in the laboratory and identification of foraminifera and ostracods by genera or species under stereo microscopy and scanning electron microscopy (SEM). Multivariate statistical analyzes and study of ecological indexes were also applied to the study of foraminifera. Three transects, from inner shelf to slope were sampled: profile 01 (east, near Galos), profile 02 (center, near the city of Macau) and profile 03 (west, near Ponta do Mel). Results indicated the predominance of benthic foraminifera and little plankton occurrence. Benthic foraminifera genera observed in abundance were Quinqueloculina, Textularia, Globigerina and Pyrgo, Quinqueloculina, Textularia, Pyrgo, Ammonia, Elphidium, Pseudononion, Peneroplis, Bolivina and Poroeponides, occurred more frequently. Less frequently been described Amphistegina, Archaias, Bigenerina, Cibicides, Cassidulina, Amphicorina, Cornuspira, Paterina, Hopkunsina, Oolina, Uvigerina, Fusenkoina, Nonionella, Amphisorus, Wiesrella, Reussella, Reophax, Nodosaria, Marginulina and Cyclogyra. Six genera of ostracods were also identified: Puriana variabilis / P. convoluted?, Loxoconcha sp, Bairdiidae, Xestoleberis sp, Hemicytheridae and Ruggiericythere sp. Groups of organisms found in the studied shelf presented chemical composition of Ca, C, O, Na, Cl, Al, Mg, and Si. The proportions of chemical elements may vary according to the type of biogenic sediment, with the highest values identified as Ca, C, Cl, Na and O. The absolute dating by carbon 14 method indicated sediments of different colors (light and dark), correspond to a single age from 3000 to 6000 years BP, related to the Quaternary. These data intend to complement information about biogenic sediments in the Brazilian continental shelf, especially in the Northeast, where there is a lack of such studies.

Foraminíferos, ostracodes e microfauna associada da plataforma continental equatorial norte-rio-grandense, NE Brasil: área Porto do Mangue a Galinhos

This study was conducted in the adjacent Brazilian equatorial inner shelf to Rio Grande do Norte, between the region of Porto do Mangue and Galinhos. The main objective is the characterization of biogenic sediments, especially foraminifera and ostracod collected on the surface of the seafloor. The methodology involved standard procedures including literature, surveys, processing of samples in the laboratory and identification of foraminifera and ostracods by genera or species under stereo microscopy and scanning electron microscopy (SEM). Multivariate statistical analyzes and study of ecological indexes were also applied to the study of foraminifera. Three transects, from inner shelf to slope were sampled: profile 01 (east, near Galos), profile 02 (center, near the city of Macau) and profile 03 (west, near Ponta do Mel). Results indicated the predominance of benthic foraminifera and little plankton occurrence. Benthic foraminifera genera observed in abundance were Quinqueloculina, Textularia, Globigerina and Pyrgo, Quinqueloculina, Textularia, Pyrgo, Ammonia, Elphidium, Pseudononion, Peneroplis, Bolivina and Poroeponides, occurred more frequently. Less frequently been described Amphistegina, Archaias, Bigenerina, Cibicides, Cassidulina, Amphicorina, Cornuspira, Paterina, Hopkunsina, Oolina, Uvigerina, Fusenkoina, Nonionella, Amphisorus, Wiesrella, Reussella, Reophax, Nodosaria, Marginulina and Cyclogyra. Six genera of ostracods were also identified: Puriana variabilis / P. convoluted?, Loxoconcha sp, Bairdiidae, Xestoleberis sp, Hemicytheridae and Ruggiericythere sp. Groups of organisms found in the studied shelf presented chemical composition of Ca, C, O, Na, Cl, Al, Mg, and Si. The proportions of chemical elements may vary according to the type of biogenic sediment, with the highest values identified as Ca, C, Cl, Na and O. The absolute dating by carbon 14 method indicated sediments of different colors (light and dark), correspond to a single age from 3000 to 6000 years BP, related to the Quaternary. These data intend to complement information about biogenic sediments in the Brazilian continental shelf, especially in the Northeast, where there is a lack of such studies.

Síntese, caracterização, propriedades e aplicação dos sistemas Mg- Al, Zn-Al e Mg-Fe

The Layered Double Hydroxides has become extremely promising materials due to its range of applications, easily obtained in the laboratory and reusability after calcination, so the knowledge regarding their properties is of utmost importance. In this study were synthesized layered double hydroxides of two systems, Mg-Al and Zn-Al, and such materials were analyzed with X-ray diffraction and, from these data, we determined the volume density, planar atomic density, size crystallite, lattice parameters, interplanar spacing and interlayer space available. Such materials were also subjected to thermogravimetric analysis reasons for heating 5, 10, 20 and 25 ° C / min to determine kinetic parameters for the formation of metaphases HTD and HTB based on theoretical models Ozawa, Flynn-Wall Starink and Model Free Kinetics. In addition, the layered double hydroxides synthesized in this working ratios were calcined heating 2.5 ° C / min and 20 ° C / min, and tested for adsorption of nitrate anion in aqueous solution batch system at time intervals 5 min, 15 min, 30 min, 1h, 2h and 4h. Such calcined materials were also subjected to exposure to the atmosphere and at intervals of 1 week, 2 weeks and 1 month were analyzed by infrared spectroscopy to study the kinetics of regeneration determining structural called "memory effect"

Síntese e caracterização de argilas pilarizadas com pilares mistos Al/Co

Two pillaring methods were tested to synthesize pillared clays containing mixed Al/Co pillars. Using the first method, based on the traditional procedure, were obtained materials containing different Co concentrations: 10, 25, 50, 75 and 100 % of Co in the pillaring solution. Just the experiments with low concentrations (10 and 25 % of Co) has formed pillared clays, whereas the sample with 25 % of cobalt showed best results compared with the one obtained just using Al as pillaring agent (basal spacing higher than 18 Å and surface area bigger than 300 m²/g). The 27Al NMR results pointed out the formation of mixed Al/Co pillars due to decreased between the intensities of AlVI/AlIV signals, indicating that the AlIV content decreased while Co content increased, suggesting the isomorphic substitution of Al atoms for Co in the Keggin ion structure (pillaring agent). For the samples containing 75 and 100 % of cobalt, it was verified the formation of others materials, which could be identified as hydrotalcite like compounds. The second pillarization method was named mixed layers, because the objective was to intercalate clay layers with hydrotalcite layers. Thus, after calcination, the hydrotalcite layers would dehydroxylate, resulting just in the metals oxides, intercalated between the clay sheets, thus generating, a pillared clay. For this purpose, were tested 4 synthesis procedures: physical mixture, mixture in water, ionic exchange under reflux and in situ synthesis. Of these, the method which showed the best results was the in situ synthesis, in which basal spacings of 14 Å (after calcination) were obtained, indicating that the samples are intercalated with metal oxides (Mg and Al). This procedure was reproduced with a Co-Al LDH (layered double hydroxide) and similar results were obtained, testifying the method reproducibility

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.