14 resultados para Ajuste interno
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
SILVA, Hiran Francisco Oliveira Lopes da. A juste estruturale educação superior no Brasil: princípios negados. 206 f., 2007. Tese (Doutorado em Educação) - Universidade Federal da Paraiba, João Pessoa, 2007.
Resumo:
Universidade Federal do Rio Grande do Norte
Resumo:
This research objectify to analyze the effects of minimum wage recovery in the household consumption in the Brazil, northeastern region of the Brazil and the state of the Rio Grande do Norte, in the period of 1995 to 2011. This is because the search for the strengthening of the internal market, via incentive policies to private demand has assumed prominence in the Government agenda. Thus, under the justification of the fierce debate about the effectiveness of countercyclical policies of Brazil, in view of the recent economic crisis, aims to: 1) retake the theoretical debate and, to a certain extent, the evolution of the theory of household consumption, as well as some conclusions about their connection with the minimum wage; 2) to describe the experiences and the effects of this legislation in economic history, with emphasis on the Brazilian case; 3) to present some of the available statistics to research bases, with attention to the specifics of each and the empirical results found for consumption in Brazil; 4) to estimate the effects of minimum wage variation in household consumption in Brazil (BR), northeast (NE) and Rio Grande do Norte (RN). From this, in order to quantify this relationship, makes inferences from the effects of the wage bill and the minimum wage on consumption, in quarterly series (with ad hoc adjustment from the "weights" of each quarter), from classic model of multiple linear regression. The hypothesis is that released: increments in income, derived from the policy of minimum wage recovery will influence directly the household consumption. However, when comparing the results between the units analyzed, the expressiveness of the northeastern families of Brazil and Rio Grande do Norte families front national dynamics with income linked to this floor, drives most significant impacts spending decisions in NE and RN, thus reducing regional disparities in the consumer. The results indicate contrary evidence, because while for the BR a unitary variation in minimum wage increases the consumption in units monetary 1.28, to the NE and RN these parameters are respectively 1.05 and 1.09
Resumo:
This thesis aims to enable a wider comprehension on thought operation as well as suggest alternatives for the formation of reflexive, critical, autonomous and creative individuals. The research defends the idea that it is possible for an individual to develop vigilant attention that makes thought flexibilization and change in the course of action, possible. This operation is called Internal Dialogue and is essentially characterized by a continuous openness towards novelty and learning. This makes it possible to minimize the usual way thought operates, in a automatic fashion (automatism). The research was based on theoretical references and ideas of David Bohm (1989;1994;2005) and Michael Polanyi (1983). The main emphasis was the understanding that a crisis situation enables awareness and state of alert that favors a more flexible thought pattern (Aragão Gomes, 1994, 1997). The methodology used was presentation and analysis of these moments through autobibliographical records with indication of crisis on behalf of the subjects. Other criteria were also used that enabled the composition of the analyzed material such as the fact that: the subjects were public and real, the data was available through accessible material; the subjects identified themselves as in crisis; these crisis were of varied kinds; they had different social, cultural and professional profiles. Thus, three auto-bibliographical elements were selected: the Infidel: the story of a woman that challenged Islam (2007), written by the political Muslim author Ayaan Hirsi; Still me: memories (2001), of the actor Christopher Reeve as well as Confessions of a Philosopher (2001), by the philosopher Bryan Magee. In these books an analysis was made related to parts that stated action an though operation that express internal dialogue. These were organized into categories that were pointed out as relevant for the identification of internal dialogue such as: Perceptions of physical reaction; emotions, beliefs and issues, individual actions, self judgment and thought, self questioning, comprehension, observation and empirical investigation, perception of the changes they performed in the world, escape of conditioning as well as action that resulted in new meaning. The analysis performed reinforces our goal once it sated that internal dialogue is an important tool that allows thought awareness, minimizing common automatism and making consciousness possible as well as favoring the occurrence of critical and reflexive thought. Thus, final considerations deal with the need for the development of teaching methodologies that address internal dialogue as a counterpoint to the many daily action that reinforce the automatism of thought
Resumo:
This thesis aims to enable a wider comprehension on thought operation as well as suggest alternatives for the formation of reflexive, critical, autonomous and creative individuals. The research defends the idea that it is possible for an individual to develop vigilant attention that makes thought flexibilization and change in the course of action, possible. This operation is called Internal Dialogue and is essentially characterized by a continuous openness towards novelty and learning. This makes it possible to minimize the usual way thought operates, in a automatic fashion (automatism). The research was based on theoretical references and ideas of David Bohm (1989;1994;2005) and Michael Polanyi (1983). The main emphasis was the understanding that a crisis situation enables awareness and state of alert that favors a more flexible thought pattern (Aragão Gomes, 1994, 1997). The methodology used was presentation and analysis of these moments through autobibliographical records with indication of crisis on behalf of the subjects. Other criteria were also used that enabled the composition of the analyzed material such as the fact that: the subjects were public and real, the data was available through accessible material; the subjects identified themselves as in crisis; these crisis were of varied kinds; they had different social, cultural and professional profiles. Thus, three auto-bibliographical elements were selected: the Infidel: the story of a woman that challenged Islam (2007), written by the political Muslim author Ayaan Hirsi; Still me: memories (2001), of the actor Christopher Reeve as well as Confessions of a Philosopher (2001), by the philosopher Bryan Magee. In these books an analysis was made related to parts that stated action an though operation that express internal dialogue. These were organized into categories that were pointed out as relevant for the identification of internal dialogue such as: Perceptions of physical reaction; emotions, beliefs and issues, individual actions, self judgment and thought, self questioning, comprehension, observation and empirical investigation, perception of the changes they performed in the world, escape of conditioning as well as action that resulted in new meaning. The analysis performed reinforces our goal once it sated that internal dialogue is an important tool that allows thought awareness, minimizing common automatism and making consciousness possible as well as favoring the occurrence of critical and reflexive thought. Thus, final considerations deal with the need for the development of teaching methodologies that address internal dialogue as a counterpoint to the many daily action that reinforce the automatism of thought
Resumo:
The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction
Resumo:
The use of solar energy for electricity generation has shown a growing interest in recent years. Generally, the conversion of solar energy into electricity is made by PV modules installed on fixed structures, with slope determined by the latitude of the installation site. In this sense, the use of mobile structures with solar tracking, has enabled increased production of the generated energy. However, the performance of these structures depends on the type of tracker and the position control used. In this work, it is proposed position control a strategy applied for a solar tracker, which will be installed in Laboratory of Power Electronics and Renewable Energy (LEPER), located in the Federal University of Rio Grande do Norte (UFRN). The tracker system is of polar type with daily positioning east-west and tilt angle manual adjustment in the seasonal periods, from north to south
Resumo:
The use of the natural gas is growing year after year in the whole world and also in Brazil. It is verified that in the last five years the profile of natural gas consumption reached a great advance and investments had been carried through in this area. In the oil industry, the use of the natural gas for fuel in the drive of engines is usual for a long date. It is also used to put into motion equipment, or still, to generate electric power. Such engines are based on the motor cycle of combustion Otto, who requires a natural gas with well definite specification, conferring characteristic anti-detonating necessary to the equipment performance for projects based on this cycle. In this work, process routes and thermodynamic conditions had been selected and evaluated. Based on simulation assays carried out in commercial simulators the content of the methane index of the effluent gas were evaluated at various ranges of pressure, temperature, flowrate, molecular weight and chemical nature and composition of the absorbent. As final result, it was established a route based on process efficiency, optimized consumption of energy and absorbent. Thereby, it serves as base for the compact equipment conception to be used in locu into the industry for the removal of hydrocarbon from the natural gas produced
Resumo:
This study aims to assess the potential for industrial reuse of textile wastewater, after passing through a physical and chemical pretreatment, into denim washing wet processing operations in an industrial textile laundry, with no need for complementary treatments and dilutions. The methodology and evaluation of the proposed tests were based on the production techniques used in the company and upgraded for the experiments tested. The characterization of the treated effluent for 16 selected parameters and the development of a monitoring able to tailor the treated effluent for final disposal in accordance with current legislation was essential for the initiation of testing for reuse. The parameters color, turbidity, SS and pH used were satisfactory as control variables and presents simple determination methods. The denim quality variables considered were: color, odor, appearance and soft handle. The tests were started on a pilot scale following complexity factors attributed to the processes, in denim fabric and jeans, which demonstrated the possibility of reuse, because there was no interference in the processes and at quality of the tested product. Industrial scale tests were initiated by a step control that confirmed the methodology efficiency applied to identify the possibility of reuse by tests that precede each recipe to be processed. 556 replicates were performed in production scale for 47 different recipes of denim washing. The percentage of water reuse was 100% for all processes and repetitions performed after the initial adjustment testing phase. All the jeans were framed with the highest quality for internal control and marketed, being accepted by contractors. The full-scale use of treated wastewater, supported by monitoring and evaluation and control methodology suggested in this study, proved to be valid in textile production, not given any negative impact to the quality the produced jeans under the presented conditions. It is believed that this methodology can be extrapolated to other laundries to determine the possibility of reuse in denim washing wet processing with the necessary modifications to each company.
Resumo:
O objetivo deste trabalho é fazer uma proposta de intervenção na Controladoria Geral do Estado do Rio Grande do Norte, com o intuito de fortalecê-la, tendo como base a Emenda Constitucional nº 45/2009, que propõe a inserção das macrofunções do Controle Interno: Auditoria Governamental, Controladoria, Corregedoria, Ouvidoria e Carreiras Específicas para os órgãos de Controle Interno. Para dar suporte a proposta, foi feita uma revisão da literatura sobre controles públicos, controle interno governamental, macrofunções do controle interno e sobre carreiras públicas no Brasil. Para propor as mudanças foram realizados dois diagnósticos no órgão, por meio de entrevistas, e constatados problemas na área de gestão organizacional e de pessoal. Diante dos resultados apresentados por meio dos diagnósticos, foram propostas mudanças e feitas comparações entre a estrutura atual e a proposta, procurando evidenciar a vantagem da última sobre a primeira, em termos de eficiência operacional, economia de meio, economia de execução, amplitude no atendimento a população, proteção e combate à corrupção, fomento ao controle social, promoção da cidadania e justiça social
Resumo:
In adolescents, who tend to sleep and wake-up later, the school schedule in the morning is associated with sleep advancement and shortening besides bedtime and wake-up time irregularity between week and weekend days. As a result, there is an increase in daytime sleepiness and a drop in cognitive performance that interfer in students performance in classroom. These consequences reinforce the need to evaluate alternatives that help the adolescent to adapt their sleep needs to the time of start of classes in the morning. Accordingly, the general aim of this study was to evaluate the effects of a sleep program education and sunlight exposure in early morning on sleep-wake cycle (SWC) and daytime sleepiness of adolescents. The students chronotype were evaluated by the Horne-Ostberg questionnaire and the health and usual sleep habits by "the health and the sleep questionnaire. The SWC patterns were assessed by sleep log, the daytime sleepiness by Karolinska Sleepiness Scale (KSS) and the alertness by the Psychomotor Vigilance Test (PVT). These parameters were compared before and after a sleep education program and before and during the sunlight exposure. The sleep program was effective in increasing sleep knowledge of adolescents, in promoting a reduction of bedtime and wake-up time irregularity and increasing the sleep duration in school days. The sunlight exposure effect was evaluated in the return to classes after vacation due to the difference in sleep patterns between school and vacation days. During the intervention week it was observed an advance of sleep schedules, an increase on sleep duration and alertness at the end of the morning. Assessed separately, sleep education and sunlight exposure should contribute to minimize adolescents partial sleep deprivation, but daytime sleepiness effect must be better investigated. These strategies should be used jointly by school members to improve health and performance of their students
Resumo:
The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology
Resumo:
In production lines, the entire process is bound to unexpected happenings which may cost losing the production quality. Thus, it means losses to the manufacturer. Identify such causes and remove them is the task of the processing management. The on-line control system consists of periodic inspection of every month produced item. Once any of those items is quali ed as not t, it is admitted that a change in the fraction of the items occurred, and then the process is stopped for adjustments. This work is an extension of Quinino & Ho (2010) and has as objective main to make the monitoramento in a process through the control on-line of quality for the number of non-conformities about the inspected item. The strategy of decision to verify if the process is under control, is directly associated to the limits of the graphic control of non-conformities of the process. A policy of preventive adjustments is incorporated in order to enlarge the conforming fraction of the process. With the help of the R software, a sensibility analysis of the proposed model is done showing in which situations it is most interesting to execute the preventive adjustment
Resumo:
The history match procedure in an oil reservoir is of paramount importance in order to obtain a characterization of the reservoir parameters (statics and dynamics) that implicates in a predict production more perfected. Throughout this process one can find reservoir model parameters which are able to reproduce the behaviour of a real reservoir.Thus, this reservoir model may be used to predict production and can aid the oil file management. During the history match procedure the reservoir model parameters are modified and for every new set of reservoir model parameters found, a fluid flow simulation is performed so that it is possible to evaluate weather or not this new set of parameters reproduces the observations in the actual reservoir. The reservoir is said to be matched when the discrepancies between the model predictions and the observations of the real reservoir are below a certain tolerance. The determination of the model parameters via history matching requires the minimisation of an objective function (difference between the observed and simulated productions according to a chosen norm) in a parameter space populated by many local minima. In other words, more than one set of reservoir model parameters fits the observation. With respect to the non-uniqueness of the solution, the inverse problem associated to history match is ill-posed. In order to reduce this ambiguity, it is necessary to incorporate a priori information and constraints in the model reservoir parameters to be determined. In this dissertation, the regularization of the inverse problem associated to the history match was performed via the introduction of a smoothness constraint in the following parameter: permeability and porosity. This constraint has geological bias of asserting that these two properties smoothly vary in space. In this sense, it is necessary to find the right relative weight of this constrain in the objective function that stabilizes the inversion and yet, introduces minimum bias. A sequential search method called COMPLEX was used to find the reservoir model parameters that best reproduce the observations of a semi-synthetic model. This method does not require the usage of derivatives when searching for the minimum of the objective function. Here, it is shown that the judicious introduction of the smoothness constraint in the objective function formulation reduces the associated ambiguity and introduces minimum bias in the estimates of permeability and porosity of the semi-synthetic reservoir model