Diagnóstico geoambiental com uso do geoprocessamento visando a determinação de potencialidades de uso do solo para a área estuarina do Rio Curimataú - Canguaretama(RN)

The activities developed in the coastal zone always arise the researchers interest, mainly when it is developed in fragile ecological areas, not observing the sustenable development laws. In this context, the analysis presented developed around the estuary of Curimatau river, located in the Eastern coast of Rio Grande do Norte state, integrates information provided by high resolution images of orbital remote sensing (IKONOS II, dated of July of 2003) and images of not-orbital remote sensing (Air photographs of DPU, dated of March of 1997) in a multitemporary perspective, diagnosising patterns of use and occupation, evaluating the main area´s impacts, together with the estuarian region fisiograph of Curimatau river. The use of high resolution images consequently allowed generates a precision cartography, facilitating the quantification of the evolution of the landscape and supporting decisions. Was possible yet, the definition of use areas, conservation areas and preservation areas; that were inserted in the concept of Potentialities: a fundamental element to management of vulnerable areas of the natural point of view. The information provided during the research had been stored in an Enviromental Georreferenced Data Base, constructed under the optics of Geographical Information Systems (GIS), that they facilitate the environment management Through fast access to information. The results were satisfactory, because permits the quantification of evolution of the landscape and the mapping. Beyond the geoenviromental diagnosis, was possible develop maps and matrixes that support the Rio Grande do Norte state costal Management.

Dinâmica do uso e ocupação do solo no litoral de Macau-RN no período de 1978 a 2008

This study was developed in the northern coast of the city of Macau, a total area of 88,52 km², located in the State of Rio Grande do Norte. It presents relatively plain surface, with interlaced of streams and gamboas, characterized by contributions of oceanic water, flooding areas of swamps. Altogether, the climatic and topographical conditions provide an ideal environment for the development of saline activity. Inserted in the geologic context of the Potiguar Basin, the region presents favorable conditions for the production of hydro-carbons. It still presents natural conditions for shrimp breeding and artisanal fishing. This work analyzes the transformations occurred in the land use, using air photographs of 1978, Landsat 5 ETM Images of 1988, 1998 and 2008. A secular analyzes was carried through the dynamics of the use of the territory and the transformations occurred in the landscape due to the increment of the productive activities. In the survey of the data for study of the area, it was verified that little alteration occurred in the 30 years. The saline activity that was present since the year of 1978 having an increase of about 5% in thirty years; the shrimp breeding activity that had its presence in the decade of 1990, presented a high growth in the land use, therefore in 1998 it presented 0.45% and currently it presents 6.59%. In the field it was observed that great areas used previously for the saline activity, today it is prepared for shrimp breeding and that the areas of petroleum exploration occupy salt mines, beaches and trays. In 1988 it presented a percentage of 0, 07% and currently it occupies 0.46%, having grown 50% in the last 10 years. Although the variation of the occupation of the area has been little expressive, shrimp breeding showed a growth of 1,200% in only 10 years. In regards to petroleum activity, there wasn t any demonstration of an increasing impact in the land use in the area of study in 26 years of exploration

Optimization of osmotic dehydration of papaya followed by air-drying

FERNANDES, Fabiano A. N. et al. Optimization of Osmotic Dehydration of Papaya of followed by air-drying. Food Research Internation, v. 39, p. 492-498, 2006.

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves