Religião e cultura local: estudo de dois grupos espíritas potiguares

The subject of this research is the spiritual religious field, connected with the local cultural perspectives. Its basis is the analysis of two spiritual groups settled in Natal/RN: The Spiritual Group Evangelho no Lar and the Spiritual Center Garimpeiros da Luz . These two groups represent a point of convergence of several sectors of this religion, either through its insertion in the local sphere or in contact to nationally influent leaders, like the mediums Francisco Cândido Xavier and Divaldo Pereira Franco. Then, it aims to reach the potiguar singularities in their spiritualism approaches, looking for an analyses to possible connections between local values and themes from the spiritualism largely developed in Brazil. So, its objective is to act in the scope of influence, references, representations and adaptive practices in a local context, and they signalize special practices . The approaches until now developed refer only to the living of a Brazilian spiritualism, perfectly developed in contact with the catholic substrate, but there s still a gap about the local observation, with its peculiarities, which its research aims to disclosure. The option for a qualitative approach, in perfect relationship with the nature of the questions which were made was considered as an appropriate way to guide the study. To reach this, it will be made an ethnography of the studied groups, not only in the use of open interviews with its members but also in the contact and observation of its religious behavior, for example: meeting for studies of the doctrine, mediunic meetings, public lectures, helping the public in general. As results of this research we can point to the delimitation of local cultural references, which are undeniable, in relation to the identification of RN personalities who are considered coordinators or active spirits in the work performed by the groups. Thus, Auta de Souza, poetess and woman of great religiosity, Augusto Severo de Albuquerque Maranhão, martyr of the aeronautics, Father João Maria, object of popular devotion and Abdias Antônio de Oliveira, ex president of the Spiritual Federation of RN, present themselves as spiritual beings who lead the adaptability to the local context. In such a context, we have to point out the work of mediums, who, having a specific charisma, interacted with the groups in the establishment of these cultural bridges already made in their own contexts (national level), through the work equally possible to be locally reproduced. This and other facts, point out to perspectives of cultural circularity , including referring to a greater linking to sub layers in a true zone that converges and has circulation between an erudite spiritualism with another one, turned to the incorporation of local and popular elements

Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Modificação superficial do tecido 100% algodão tratado com plasma

The 100% cotton fabric (CO)* treated with plasma of methane CH4 has direct application in all areas that needs of aqueous solutions repellent material like coatings and uniforms applied biomedical, aeronautics, and automobile between others. 100% cotton fabric (CO) samples were treated by plasma with two differents atmosphere: Methane gas (CH4), treatment time was varied in 10 in 10 min. until 60 min., and mixture methane/argon (CH4/Ar), it was varied the proportion 1:9, 2:8, 3:7, 4:6, 5:5, 6:4, 7:3, 8:2 e 9:1, with treatment time of 30 minutes. In both, the fluxe was 5 sccm (second cubic centimeter), pressure 6 mbar, voltage 490 V and current 0,15A. The objective of work was measure the superficial tension of 100% CO then it treated with plasma, using contact angle measures of water and glycerol with the surface. The samples were tested after treatment, with 8 and 12 months to verify the superficial modification effects. It was verified an increase of hydrophobility with the Sessile drop values varied between 116,69º to 137,85º and it carried on after 12 months. The no treated samples shows contact angle equal 0º. OES analysis and Raman spectroscopy were accomplished. In the SEM analysis was verified oligomers. The plasma treatment is correct environmental, It turning greater than conventional treatments

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP