Desenvolvimento, pobreza e meio ambiente no seridó potiguar: um estudo centrado nas micro-regiões do seridó oriental e ocidental

This research work intends to carry out a study focused on the dynamic between development, poverty reduction and conservation of natural resources. To consider this relationship to the region chosen was the micro-region of Eastern and Western Seridó in the state of Rio Grande do Norte. In recent years, several studies (Araújo, 2011; BASTOS, 2009) have pointed out that after a period of economic crisis in its tripodproductive, formed by the activities of farming, cotton farming, mining and faced in the eighties, this region of the State of Rio Grande do Norte, has not only shown signs of economic recovery but also improve their social indicators. On the other hand, studies of desertification as the view of the state of RN (produced in cooperation between the Government of RN and research institutions) and the Sustainable Development Plan of Seridó (ADES, 2000), indicate that there is an ongoing French process of degradation of natural resources that is capable of compromising the ability of sustaining such a system. To verify this reality and likely finding this relationship, this work is adopted for this study, the analysis of evolution of secondary data from official bodies such as the IBGE on HDI, per capita income and other social indicators between 2000 and 2009. Here is another time of the survey analysis of qualitative data collected from interviews with institutions of academic intervention in nature, researchers at the Federal University of Rio Grande do Norte (UFRN) State agencies that address the issue of the Middle Environment in Seridó: Institute for Sustainable Development of the NB (IDEMA) and the Brazilian Institute of Environment and the Amazon (IBAMA) and institutions of direct intervention in the region, as the Agency's Sustainable Development Seridó (adhesive) and the Joint Semi-Arid (ASA). After crossing data from quantitative and qualitative, it was found that the dynamics of the region's economic Seridó Potiguar partially answers the improvement of social indicators of poverty. Contribution by the State in this shared stock transfer income. Regarding the influence of productive restructuring in the region on issues of environment, it is noted that the ceramic tile industry, responsible for the absorption percentage of the population with limited ingress into the urban economy, given the low education, accounts for the increase of susceptibility to the ongoing process of desertification in North Seridó Rio Grande. We conclude finally that the guarantee of increased income, freedom and conservation of natural resources ensures primarily by changing the beliefs and values, especially on the part of the business sector, which use natural resources so predatory, aimed at maintaining their rates of return on investment. And concomitantly, the synchronization between technological change, through the use of new energy sources, and institutional change.

Avaliação por pig de perfilagem de danos superfciais nos materiais das paredes de dutos de petróleo

The modern technology of materials and structural integrity of pipelines requests the use of inspection tools named inspection pigs to detect, localize and measure the length, width and depth dimensions of the thickness losses of walls of buried and underwater pipelines in service. These tools run them internally, performing and recording measurements, with performance that varies according to the pig s technology. It has been developed recently an instrumented pig technology, called feller pig. This work aims to indicate factors that influence the feller pig technology performance in the detection and in the accuracy of measurement of the length, width and depth dimensions of the thickness losses on the internal surface of an oil pipeline wall under normal conditions of oil pipe inspection with pig. In this work, is made a collection of factors and an analyses of the technology based on the available literature, as well as an experiment to observe the technology and the factors operating. In the experiment, a feeler pig is used in a pipeline built in carbon steel and in operation that flows petroleum, in witch are observed areas with internal thickness losses occurred naturally. Some of these areas and their dimensions taken by automated ultra-sound scanner are compared with the ones indicated by the feller pig. Based on the data collection, on the analysis and on the experiment, the influence of factors object of this research is discussed. It is concluded that, among these, there are factors related to pipe fabrication tolerances, to wear of pig components, to internal adhesive wear of pipeline, to other pipeline damages and to technology characteristics. Finally, actions are suggested to know better, improve and define the applicability of this technology

Efeito da adição de diatomita no comportamento reológico e mecânico de argamassas colantes

The mortar is a type of adhesive products used in large scale in construction, it is a function of its variety and ease of application . Although industrialized product and endowed with technology in its production is very frequent occurrence of the same pathology , which causes frequent damage and losses in the construction industry. Faced with this real market situation , the technical and scientific study of the effects of the addition of diatomite on the rheological and mechanical behavior of adhesive mortars are needed. This work back as a suggestion the use of diatomite as a mineral additive in formulations of adhesive mortars for partial replacement of cellulose based additives . The choice of using this mineral occurs through physical, chemical and rheological properties that justify its use in this product line , and is a raw material abundant in our region and can thus contribute positively to the minimization of direct costs cellulose -based additives . Industrial adhesive mortar used for comparison , was type AC1 . Formulations of adhesive mortar with diatomite held constant dosed quantities of sand, cement and the water / cement (w / c ) , or adhesive mortar formulations were developed with levels 10, 20, 30 and 40% of diatomite substituting part of the cellulose -based additives . These mortars were subjected to the following tests that define and evaluate the rheological and mechanical behavior of this type of mortar. The results attest the best performance of the adhesive mortar type AC1 with partial replacement of 30 % of the cellulose-based additive for diatomite

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry