Ribeira, técnica versus natureza: transformações em prol de um projeto de modernização (1860-1932)

The necessity of the insertion of the capital of Rio Grande do Norte in the world-wide commercial scene and its claim as the seat of political power, in ends of nineteenth and beginning of twentieth century, determined the direction of urban interventions undertaken by government to restructure the city. In that matter, there were several actions of improvements and embellishment in Natal, which had, as a starting point, the adequacy works of the port, located in the Ribeira quarter, with the aim of ending the physical isolation that reinforced its economic stagnation. Besides the problems faced in the opening bar of the Potengi River, and would complement the required improvements, other barriers demonstrate the tension established between the physic-geographic field and the man: the flooded and slope which connected Cidade Alta and Ribeira the first two quarters of the city.The execution of these works demanded knowledge whose domain and application it was for engineering. But, how the actions done for the engineers, in sense to transform natural areas into constructed spaces made possible the intentional conformation of the quarter of the Ribeira in a commercial and politician-administrative center, in the middle of the XIX century and beginning of the XX? Understand, therefore, the employment effects of technology on the physical-geographical Ribeira, is the objective of this work that uses theoretical and methodological procedures of Urban Environmental History, by analyzing the relationship between the environment and the man, mediated by knowledge and use of technologies. The documental research was used, as primary sources, the Messages of the Provincial Assembly Government that later became the Legislative Assembly of Rio Grande do Norte reports and articles on specialized publications, in addition to local newspapers. The work is structured in five chapters. First, some comments about Urban Environmental History (Chapter 1) supplemented with analysis of the conceptual construction of nature in the Contemporary Era and its application in the city (chapter 02), the following chapters (03 and 04) deal with the rise of engineers as a active group in the Brazilian government frameworks and their vision about the nature inside the urban environment and it is studied how the professional technicians dealt with the improvement work of the harbor and in the shock with the natural forces. Other works that would complement this "project" of modernization and had had natural obstacles to be removed the Ribeira flood and slope constitute the subject of the fifth chapter. Finally, some final considerations retake the initial discussions aiming an association between the technique and the nature as junction elements inside the process of constitution of a Modern Natal

Fachada flexível para casa padronizada em condomínios

The employment of flexibility in the design of façades makes them adaptable to adverse weather conditions, resulting in both minimization of environmental discomfort and improvement of energy efficiency. The present study highlights the potential of flexible façades as a resource to reduce rigidity and form repetition, which are usually employed in condominiums of standardized houses; as such, the work presented herein contributes to field of study of architectural projects strategies for adapting and integrating buildings within the local climate context. Two façade options were designed using as reference the bionics and the kinetics, as well as their applications to architectural constructions. This resulted in two lightweight and dynamic structures, which cater to constraints of comfort through combinations of movements, which control the impact of solar radiation and of cooling in the environment. The efficacy and technical functionality of the façades were tested with comfort analysis and graphic computation software, as well as with physical models. Thus, the current research contributes to the improvement of architectural solutions aimed at using passive energy strategies in order to offer both better quality for the users and for the sustainability of the planet

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

Vivendo do mar: tradição, memória e mudança na vida pesqueira de Pitangui-RN

This research focuses on the fishery activity, aligned to knowledge of past generations, and the transformation to those who depend on this activity for their livelihood, at the seashore community of Pitangui in Extremoz municipality, which lies 40 km away from Natal, seat of the state of Rio Grande do Norte. The intense modernization which has taking place during the last few years may be considered the result of a number of economic, social and cultural factors, as the introduction of new fishery technology. On the other hand, the present study seeks to show how this changing process happened, and to what extent those affected understand and evaluate this transformation. The methodology to carry out the ethnographic work was mainly adopted by qualitative methods and techniques - by participant observation, oral history, photography and the audiovisual records besides reference to data extracted under quantitative methods, as an important instrument of analyses. This induces a conclusion that the transformation of the community is a consequence of the globalized market, though still tied up to specific local relations. The emerging results are: the use of new fishery technology, and new ways of orientation and navigation; the opening to new jobs and occupational activity, the re-order of space s appropriation; changing sociability, larger access to consumer goods, besides bringing on some new conflicts land appropriation and the fishery and the protection of the environment. All this comprehended as a result of the movement of the local relations participating in the global spaces

Análise crítica dos produtos de mobilidade sentada - cadeiras de rodas - utilizados por crianças e adolescentes com paralisia cerebral em Natal/RN e outros municípios do Rio Grande do Norte

The objective of this work is to critically analyze the seated mobility adaptive equipment, wheelchair, used by non-ambulatory children/adolescents diagnosed with cerebral palsy of the quadriplegy type with ages in between 0-18 years old in the municipal city of Natal/RN and of other ones in the state of Rio Grande do Norte. This study is characterized as descriptive as it took into consideration the individualized conditions of each child/adolescent and of their home environment, and also evaluates the condition of the used seated mobility devices such as wheelchairs or strollers. Thirty three (33) subjects which had a wheelchair prescribed by a healthcare professional specialist in adaptive equipment within the past 3 years were selected. A questionnaire was applied through a phone with the patient s primary care giver or parents. The results obtained showed that all the equipment being used had an anatomical seat and back and the tilt system mechanism and even though most of the patients required small individual adjustments upon receiving the wheelchair in order to accommodate to the patients characteristics. From the point of view of the caregiver/parents interviewed, 97% described satisfied with the equipment and report assistance with mobility (97%), comfort (82%) and good posture (82%) as the main positive aspects from the equipment. The results also describe the aspects related to the maintenance, time used and activities developed that were reported by the patients. The conclusion therefore is that in order to select the equipment to meet the needs of the consumer it is necessary that: an appropriate wheelchair prescription takes place, the up-to-date knowledge of equipment available in the market, the appropriate use of the resources from the concession programs of the government that purchase equipment and the establishment of link in between the manufacturers, patients and the caregivers

A pegada de carbono como um dos indicadores de sustentabilidade para medição da responsabilidade socioambiental empresarial: um estudo de caso na unidade sede da Petrobras em Natal-RN

As a contemporary tendency, it is been evidenced that the environmental changes theme, already admitted as a concernment to international economical and political reality, is also gaining repercussion on industrial and business sector. Firms are implementing actions on trial to minimize their own greenhouse gases (GHG) emissions impacts. However, the great majority of those actions of Corporative Social-Environmental Responsibility (CSR) are referred only to direct emissions of the main production systems. Direct emissions are those derived of an isolate process, without considering the upstream and downstream processes emissions, which respond for the majority of emissions originated because of respective firm‟s production system existence. Because the greenhouse effect occurs globally and the GHG emissions contribute to the environmental changes independently of their origin, it must be taken into account the whole productive life cycle of products and systems, since the energy invested on resources extraction and necessary materials to the final disposal. To do so, it must be investigated all relevant steps of a product/production system life cycle, tracking all activities which emit greenhouse gases, directly or indirectly. This amount of emissions consists in the firm‟s Carbon Footprint. This research purpose is to defend the Carbon Footprint relevance and its adoption viability to be used as an Environmental Indicator on measurement/assessment of CSR. It has been realized a study case on Petrobras‟s seat unity at Natal-Brazil, assessing part of its Carbon Footprint. It has been used the software GEMIS 4.6 to do the emissions quantifying. The items measured were the direct emissions of the own unity vehicles and indirect emissions of offset paper (A4), energy and disposable plastic cups consumed. To 2009, these emissions were 3.811,94 tCO2eq. We may conclude that Carbon Footprint quantification is indispensable to the knowledge of real emissions caused by a productive process existence, must serving as basis to CSR decisions about the environmental changes reversion challenge

Uma arquitetura baseada em agentes para configuração dinâmica de aplicações inteligentes em ambiente foundation fieldbus

The industrial automation is directly linked to the development of information tecnology. Better hardware solutions, as well as improvements in software development methodologies make possible the rapid growth of the productive process control. In this thesis, we propose an architecture that will allow the joining of two technologies in hardware (industrial network) and software field (multiagent systems). The objective of this proposal is to join those technologies in a multiagent architecture to allow control strategies implementations in to field devices. With this, we intend develop an agents architecture to detect and solve problems which may occur in the industrial network environment. Our work ally machine learning with industrial context, become proposed multiagent architecture adaptable to unfamiliar or unexpected production environment. We used neural networks and presented an allocation strategies of these networks in industrial network field devices. With this we intend to improve decision support at plant level and allow operations human intervention independent

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Impactos do estresse salino e da cobertura morta nas características químicas do solo e no desenvolvimento do amaranto

Availability of good quality water has been reduced vertiginously, over the last decade, in the world. In some regions, the water resources have high concentration of the dissolved salts, these characteristics of the water make it s use impossible. Water quality can be a limitation for irrigated agriculture, principally in regions of arid or semiarid climate where the water resources are generally saline and are exposed at high evaporation ratio. For that reason, precipitation of the salts occurs near the soil surface and those salts themselves cumulate in the vegetal tissue, reducing the soil fertility and crop production. The adoption of tolerant crop to the water salinity and soil salinity, adaptable to the climatic conditions is other emergent necessity. This work had the goal of studying the effects of four salinity levels of the irrigation water salinity and use of mulch, dried leaves of Forest mangrove (Acacia mangiumWilld), in cultivated soil with amaranth (Amaranthus cruentus, BRS Alegria variety), in greenhouse. It was utilized the transplant of plants to PVC columns, containing 30 kg of silty loam soil, 10 days after emerging, with space of 50 x 50 cm between lines. Treatments were composed by combination of four levels of salinity (0.147; 1.500; 3.000 e 4.500 dS m-1), obtained by addition NaCl (commercial) to irrigation water and soil with and without protection, by mulch. A factorial system 4 x 2 was used with four repetitions, totalizing 32 parcels. The concentrations of nutrients in soil solution have been evaluated, in the dry matter of the vegetal tissue (roots, stem, leaves and raceme residue), at the end of the vegetative cycle. The use of soil protection reduced time for the beginning inflorescence of plants, at the same time, the increase of the salinity delayed this phase of amaranth development. The use of the mulch effectively increased the height, stem diameter, area of the larger leaf, humidity and dry matter content and amaranth grain production. The vegetal species showed salinity tolerance to experimented levels. The adopted treatments did not affect the pH values, exchangeable cation contents, electrical conductivity of soil solution (EC1:5) and saturated extract (ECSE), and Ca+2, Mg+, Fe+2 and Mn+2 contents, in the soil solution. The increase of the salinity concentration in the irrigation water inhibited the mineralization process of the organic matter (OM) and, consequently, the efficiency in the it´s utilization by plants, at the same time, produced increase in the values of the exchangeable sodium percentage (ESP), sodium adsorption ratio (SAR) and potassium adsorption ratio (PAR), in the soil solution. Therefore, the use of the mulch did not affect the first three parameters. The protein and nutrient contents: K+, Ca+2, P, Mg+2 e Cu+2, in amaranth grains, were improved by tillage condition. The raceme residues showed chemical/nutritional composition that makes advantageous its application in animal ration. In this context, it follows that amaranth tolerate the saline stress, of the irrigation water, until 4.500 dS m-1, temperature and relative humidity of the air predominant in the experimental environment

Pesca artesanal entre mudanças socioambientais: estudo de caso na APA Bonfim-Guaraíra/RN-Brasil

Artisanal fishing is one of the important economic activities of Rio Grande do Norte (RN), becoming the main form of survival and income for many families. The southern coast of RN has strong fishing tradition, both in exploitation of fish as in the collection of mollusks on the banks of Guaraíra Lagoon (APA Bonfim-Guaraíra). In recent years, fishing communities have become more vulnerable to outside influences, since the socio-economic and environmental changes are exposed. These changes require adjustments to the fishermen to different environmental conditions, as the social and natural systems are driven by reorganization and upgrading processes. The living conditions in fishing communities are objective and necessary in different ways, according to a selection that is cultural, so adaptable. This study has the general objective to analyze the main environmental changes in fishing communities, based on the understanding of fishermen and mollusk fisherwomen about this problem. The specific objectives searched to: describe the socioeconomic profile, prospects and difficulties of fishermen and mollusk fisherwomen; investigate the major social and environmental changes in the fishing communities of Patané and Camocim (Arez/RN). The methodology was qualitative-quantitative with the techniques of observation in the field and open and semistructured interviews applied to representatives of Cologne fishing, fishermen and mollusk fisherwomen. Between the months of January to July 2014 were applied semistructured interviews with 41 interlocutors in Patané and 23 of Camocim; totaling 64 people. The results indicated that the interlocutors are aged 40 to 60 years; have only completed elementary school level; are married and have children; survive on less than a minimum wage income and they are not receiving employment insurance. The case study also revealed that the socioeconomic and environmental problems reflected in changes in reproduction, organization and social division of labor, which generates adaptive changes of families to external influences, resulting directly from other economic activities and market pressure and indirectly from tourism. Therefore, adaptations to changes scenario presented as favorable to economic aspects and unfavorable to the social and environmental aspects. In short, the fishery develops on technical, bureaucratic and financial obstacles, in the everyday needs of men and women is the determining factor in willingness to continue exercising fishing and shell fishing on Guaraíra Lagoon, space representing relations social, practices and customs transmitted in the course of local history through social memory of the oldest to the youngest.

A fiscalização do exercício profissional no Conselho Regional de Enfermagem do Rio Grande do Norte: um debate ético

The present investigation had as its study subject the history of professional monitoring, at the Regional Nursing Council of Rio Grande do Norte (Coren-RN). It assumes that the fiscalization by the Council is an important tool for improving the quality of nursing care. This study aims to analyze the history of monitoring of the nursing profession in Rio Grande do Norte, in the period from 1993 to 2013. It was marked in the ethical-philosophical contribution of Fourez and Vázquez. This is a study of social history, descriptive and analytical, with a qualitative approach, using the methods of documentary research and the technique of oral history. It had the Coren-RN as locus of the empirical research, with its documents and the participation of inspectors and presidents. The history of monitoring was built based on documents and interviews with those who lived through this path. The project was approved by the Research Ethics Committee of UFRN as Opinion 562 400/2014 (CAAE: 25452113.7.0000.5537). The results indicate that the Coren-RN, during these twenty years faced many difficulties such as the shortage of inspectors, the precarious reality of most health services, lack of professional qualification, the illegality of professional practice and structural deficiency in the institution. Nevertheless, it must be recognized that the monitoring process exercised by the Council, has evolved over the years. This evolution is expressed in increasing the number of inspectors, in the acquisition of a new seat and three vehicles, the creation of the subsections in the cities of Natal, Caicó and Pau dos Ferros, the referral of ethical procedures, among other achievements. Similarly, it is registered an improvement in the credibility of nursing professionals and other regulatory agencies. In summary, the monitoring as core activity of the Council is going through a process of transformation, in order to make the dialogue between the disciplinary design and the pedagogical design, in defense of nursing care quality. Therefore, it is an unfinished process, in continuous construction.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Uma plataforma adaptável para localização em ambientes internos

Location systems have become increasingly part of people's lives. For outdoor environments, GPS appears as standard technology, widely disseminated and used. However, people usually spend most of their daily time in indoor environments, such as: hospitals, universities, factories, buildings, etc. In these environments, GPS does not work properly causing an inaccurate positioning. Currently, to perform the location of people or objects in indoor environments no single technology could reproduce for indoors the same result achieved by GPS for outdoors environments. Due to this, it is necessary to consider use of information from multiple sources using diferent technologies. Thus, this work aims to build an Adaptable Platform for Indoor location. Based on this goal, the IndoLoR platform is proposed. This platform aims to allow information reception from diferent sources, data processing, data fusion, data storage and data retrieval for the indoor location context.

Uma plataforma adaptável para localização em ambientes internos

Location systems have become increasingly part of people's lives. For outdoor environments, GPS appears as standard technology, widely disseminated and used. However, people usually spend most of their daily time in indoor environments, such as: hospitals, universities, factories, buildings, etc. In these environments, GPS does not work properly causing an inaccurate positioning. Currently, to perform the location of people or objects in indoor environments no single technology could reproduce for indoors the same result achieved by GPS for outdoors environments. Due to this, it is necessary to consider use of information from multiple sources using diferent technologies. Thus, this work aims to build an Adaptable Platform for Indoor location. Based on this goal, the IndoLoR platform is proposed. This platform aims to allow information reception from diferent sources, data processing, data fusion, data storage and data retrieval for the indoor location context.