Incidência e fatores de risco da retinopatia diabética em pacientes do Hospital Universitário Onofre Lopes, Natal-RN

Estudar a incidência e fatores de risco (tempo de doença e presença de hipertensão arterial sistêmica) para retinopatia diabética em 1002 pacientes encaminhados pelo Programa de Diabetes do Hospital Universitário Onofre Lopes no período de 1992 – 1995. Métodos: Estudo retrospectivo de pacientes com diagnóstico de diabetes mellitus encaminhados ao Setor de Retina do Departamento de Oftalmologia pelo Programa de Diabetes do Hospital Universitário e submetido, sob a supervisão do autor, a exame oftalmológico, incluindo medida da acuidade visual corrigida (tabela de Snellen), biomicroscopia do segmento anterior e posterior, tonometria de aplanação e oftalmoscopia binocular indireta sob midríase(tropicamida 1% + fenilefrina 10%). Foi realizada análise dos prontuários referente ao tempo de doenças e diagnostico clínico de hipertensão arterial sistêmica. Resultados: Dos 1002 diabéticos examinados (em 24 deles a fundoscopia foi inviável), 978 foram separados em 4 grupos: sem retinopatia diabética (SRD), 675 casos (69,01%); com retinopatia diabética não proliferativa (RDNP), 207 casos (21,16%); com retinopatia diabética proliferativa (RDP), 70 casos (7,15%); e pacientes já fotocoagulados (JFC), 26 casos (2,65%). Do total, 291 eram do sexo masculino (29%) e 711 do sexo feminino (71%). Os 4 grupos foram ainda avaliados quanto ao sexo, a faixa etária, a acuidade visual, tempo de doença, presença de catarata e hipertensão arterial sistêmica e comparados entre si. Com relação ao tipo de diabetes, 95 eram do tipo I (9,4%), 870 pacientes eram do tipo II (86,8%), e em 37 casos(3,7%) o tipo de diabetes não foi determinado. Conclusões: Comprovou-se que os pacientes com maior tempo de doença tinham maior probabilidade de desenvolver retinopatia diabética, e que a hipertensão arterial sistêmica não constituiu fator de risco em relação à diminuição da acuidade visual nos pacientes hipertensos

Síntese e caracterização do carbeto de molibdênio nanoestruturado para fins catalíticos na reação de oxidação parcial do metano

The nanostructures materials are characterized to have particle size smaller than 100 nm and could reach 1 nm. Due to the extremely reduced dimensions of the grains, the properties of these materials are significantly modified relatively when compared with the conventional materials. In the present work was accomplished a study and characterization of the molybdenum carbide, seeking obtain it with particles size in the nanometers order and evaluate its potential as catalyst in the reaction of partial methane oxidation. The method used for obtaining the molybdenum carbide was starting from the precursor ammonium heptamolybdate of that was developed in split into two oven, in reactor of fixed bed, with at a heating rate of 5ºC/min, in a flow of methane and hydrogen whose flow was of 15L/h with 5% of methane for all of the samples. The studied temperatures were 350, 500, 600, 650, 660, 675 and 700ºC and were conducted for 0, 60, 120 and 180 minutes, and the percent amount and the crystallite size of the intermediate phases were determined by the Rietveld refinement method. The carbide obtained at 660ºC for 3 hours of reaction showed the best results, 24 nm. Certain the best synthesis condition, a passivating study was accomplished, in these conditions, to verify the stability of the carbide when exposed to the air. The molybdenum carbide was characterized by SEM, TEM, elemental analysis, ICP-AES, TG in atmosphere of hydrogen and TPR. Through the elemental analysis and ICP-AES the presence carbon load was verified. TG in atmosphere of hydrogen proved that is necessary the passivating of the molybdenum carbide, because occur oxidation in room temperature. The catalytic test was accomplished in the plant of Fischer-Tropsch of CTGAS, that is composed of a reactor of fixed bed. Already the catalytic test showed that the carbide presents activity for partial oxidation, but the operational conditions should be adjusted to improve the conversion

Estudo dos óxidos A2B2O7 e ABO3 a base de terras raras, para aplicações térmicas e catalíticas a altas temperaturas

Rare earth elements have recently been involved in a range of advanced technologies like microelectronics, membranes for catalytic conversion and applications in gas sensors. In the family of rare earth elements like cerium can play a key role in such industrial applications. However, the high cost of these materials and the control and efficiencies associated processes required for its use in advanced technologies, are a permanent obstacle to its industrial development. In present study was proposed the creation of phases based on rare earth elements that can be used because of its thermal behavior, ionic conduction and catalytic properties. This way were studied two types of structure (ABO3 and A2B2O7), the basis of rare earths, observing their transport properties of ionic and electronic, as well as their catalytic applications in the treatment of methane. For the process of obtaining the first structure, a new synthesis method based on the use of EDTA citrate mixture was used to develop a precursor, which undergone heat treatment at 950 ° C resulted in the development of submicron phase BaCeO3 powders. The catalytic activity of perovskite begins at 450 ° C to achieve complete conversion at 675 ° C, where at this temperature, the catalytic efficiency of the phase is maximum. The evolution of conductivity with temperature for the perovskite phase revealed a series of electrical changes strongly correlated with structural transitions known in the literature. Finally, we can establish a real correlation between the high catalytic activity observed around the temperature of 650 ° C and increasing the oxygen ionic conductivity. For the second structure, showed clearly that it is possible, through chemical processes optimized to separate the rare earth elements and synthesize a pyrochlore phase TR2Ce2O7 particular formula. This "extracted phase" can be obtained directly at low cost, based on complex systems made of natural minerals and tailings, such as monazite. Moreover, this method is applied to matters of "no cost", which is the case of waste, making a preparation method of phases useful for high technology applications