5 resultados para 2-STAGE COMBUSTION
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Given the environmental concern over global warming that occurs mainly by emission of CO2 from the combustion of petroleum, coal and natural gas research focused on alternative and clean energy generation has been intensified. Among these, the highlight the solid oxide fuel cell intermediate temperature (IT-SOFC). For application as electrolyte of the devices doped based CeO2 with rare earth ions (TR+ 3) have been quite promising because they have good ionic conductivity and operate at relatively low temperatures (500-800 ° C). In this work, studied the Ce1-xEuxO2-δ (x = 0,1, 0,2 and 0,3), solid solutions synthesized by the polymeric precursor method to be used as solid electrolyte. It was also studied the processing steps of these powders (milling, compaction and two step sintering) in order to obtain dense sintered pellets with reduced grain size and homogeneous microstructure. For this, the powders were characterized by thermal analysis, X-ray diffraction, particle size distribution and scanning electrons microscopy, since the sintered samples were characterized by dilatometry, scanning electrons microscopy, density and grain size measurements. By x-ray diffraction, it was verified the formation of the solid solution for all compositions. Crystallites in the nanometric scale were found for both sintering routes but the two step sintering presented significant reduction in the average grain size
Resumo:
The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace
Resumo:
Currently, bone morphogenetic proteins (BMPs) have effective participation in the growth of malignancies. Knowing that there are few studies involving BMPs and oral squamous cell carcinoma, this work constitutes an immunohistochemical study of BMP-2, BMPR IA and BMPR II in squamous cell carcinomas (SCC) of the lower lip relating to the clinical and pathological aspects of this lesion. The sample consisted of 40 cases of SCC of the lower lip, being 20 cases of SCC of the lower lip with regional metastasis and 20 cases without metastasis. We evaluated the intensity of expression (score 1 to mark absent / weak, score 2 for high ) and was found the percentage of labeled cells, where the score was 1 cases with 0 to 50% of positive cells, score 2 with 51 to 75% of positive cells, and score 3 more than 75% of positive cells. The sample comprised 72.5% of men with a mean age of 65.8 years, there was a predominance of stage II and 52.5% of the carcinomas were classified as low grade, being carcinoma with metastasis presenting most cases (70%) as carcinomas of high malignancy grade (p = 0.004). The largest number of cases of SCC of the lower lip that were in stages I / II (61, 9%) were classified as carcinomas of low grade malignancy and carcinomas in stages III / IV were classified as high-grade tumors (p = 0, 024). The BMP-2 showed strong intensity of immunostaining in 82.5%, BMPR-IA showed 55% of cases with an intensity of immunostaining absent / weak and BMPR-II showed 85% of cases with an intensity of immunostaining absent / weak. Only the protein BMPR-IA were significantly associated with all clinic-pathological parameters studied, metastasis (p <0.001), TNM (p <0.001) and histological grade of malignancy with (p = 0.028). The percentage of positive cells, all markers showed the highest number of cases with more than 75% of positive cells (score 3) and only BMPR-II showed statistical difference when related to the presence and absence of metastasis (p = 0.049 ). We conclude that there is disturbance in the BMP signaling pathway in EC-mediated lower lip and that high expression of BMP-2 associated with the expression of BMPR-IA and BMPR-II are associated with metastasis in carcinoma
Resumo:
Bone morphogenetic proteins (BMPs) are cytokines involved in proliferation and angiogenesis of many kind of human cancer. The present study analyzed the immunohistochemical expression of BMP-2, BMPR-II, BMPR-IA and endoglin (CD105) and their relationship with the biological behavior and local angiogenesis in tongue oral squamous cells carcinoma (SCC). The sample consisted of 25 cases of tongue SCC without metastasis, 25 tongue SCC with metastasis and 25 cases of Inflamatory Fibrous Hyperplasia (IFH).The histological grade of malignancy proposed by Bryne (1998), adapted by Miranda (2002) was used to classify all tongue SCC cases. Score 0 was attributed to absent-weak immunoexpression and score 1 for strong immunostaning and pattern of distribution was focal or diffuse. Microvessel counts (MVC) was established for CD105. Most of the patients with tongue SCC was male. The principal age in tongue SCC without metastasis was over 65 years and in tongue SCC with metastasis was between 45-65 years. There were predominance of stage II in TNM and in the specimens with high-grade, independent of studied group. For BMP-2, 56% of tongue SCC without metastasis and 72% tongue SCC with metastasis exhibited score 1 while the IFH showed secore 0 in 72% of the cases, with statistical association (p=0,007). Considering the BMPR-II, 52% of tongue SCC without metastasis exhibited score 0; 56% tongue SCC with metastasis and 60% IFH showed score 1. The majority cases of BMPR-IA demonstrated score 1 and 100% of CD105 exhibited strong immunoexpression in tongue SCC. Regarding the pattern distribution, it was noted a tendency to diffuse pattern for the proteins in all groups. The means of MVC were similar in tongue SCC without metastasis (32,91) and in tongue SCC with metastasis (32,05), however existed statistical difference with IFH (p<0,001). There was statistical association of BMP-2 expression with BMPR-II (p=0,008), BMPR-IA (p=0,006) and CD105 (p=0,046). An association between TNM and BMP-2 immunoexpression and their receptors was not detected, nevertheless this association was found with MVC (p=0,047) whose averages were higher for the stages II (35,97) e IV (35,69). No association between histological grading and these proteins was observed. This study suggests that the superexpression of BMP-2 signaling pathways acts on cell proliferation in tongue SCC and can be implicated with more invasive potential. Additionaly, the CD105 is a potent biological marker of neovascularization in this neoplasm and their association with BMP-2 and BMPR-IA receptor, showed that this type of cancer in BMP-2 is presented as pro-angiogenic in the metastatic process
Resumo:
In this work, the structures of LaCoO3, La0,8Ba0,2CoO3 and La0,8Ca0,2CoO3 perovskites were characterized as a function of temperature (LaCoO3 structure being analyzed only at room temperature). The characterization of these materials were made by X-Ray Absorption Spectroscopy (XAS), in the cobalt K-edge, taking into account the correlated Einstein model X-ray absorption fine structure (EXAFS). The first part of the absorption spectrum corresponded the X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). These materials were prepared by the combustion method. The combustion products were calcinated at 900 0C, for 6 hours in air. Noted that the sample LaCoO3 at room temperature and samples doped with Calcium and Barium in the temperature range of 50 K to 298 K showed greater distortion to monoclinic symmetry with space group I2/a. However, the sample doped with barium at the temperatures 50 K, 220 K, and 260 K showed a slight distortion to rhombohedral symmetry with space group R-3c. The La0,8Ca0, 2CoO3 structure was few sensitive to temperature variation, showing a higher local distortion in the octahedron and a higher local thermal disorder. These interpretations were in agreement with the information electronic structural on the XANES region and geometric in the EXAFS region