Índices de obesidade central e fatores de risco cardiovascular na síndrome dos ovários policísticos

Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF

Influência de tratamentos térmicos no comportamento mecânico da blenda poli(metacrilato de metila) / poli(tereftalato de etileno) reciclado

Studies indicate that a variation in the degree of crystallinity of the components of a polymer blend influences the mechanical properties. This variation can be obtained by subjecting the blend to heat treatments that lead to changes in the spherulitic structure. The aim of this work is to analyze the influence of different heat treatments on the variation of the degree of crystallinity and to establish a relationship between this variation and the mechanical behavior of poly(methyl methacrylate)/poly(ethylene terephthalate) recycled (PMMA / PETrec) with and without the use of compatibilizer agent poly(methyl methacrylate-al-glycidyl methacrylate-al-ethyl acrylate) (MMAGMA- EA). All compositions were subjected to two heat treatments. T1 heat treatment the samples were treated at 130 ° C for 30 minutes and cooled in air. In T2, the samples were treated at 230 ° C for 5 minutes and cooled to approximately -10 ° C. The variation of the degree of crystallinity was determined by the proportional relationship between crystallinity and density, with the density measured by pycnometry. The mechanical behavior was verified by tensile tests with and without the presence of notches and pre-cracks, and by method of fracture toughness in plane strain (KIC). We used the scanning electron microscopy (SEM) to analyze the fracture surface of the samples. The compositions subjected to heat treatment T1, in general, showed an increase in the degree of crystallinity in tensile strength and a tendency to decrease in toughness, while compositions undergoing treatment T2 showed that the opposite behavior. Therefore, this work showed that heat treatment can give a polymer blend further diversity of its properties, this being caused by changes in the crystal structure

Acurácia dos índices antropométricos de obesidade central na determinação de síndrome metabólica e fatores de risco cardiovascular em mulheres com síndrome dos ovários policísticos

A síndrome dos ovários policísticos (SOP) é a desordem endócrina mais comum em mulheres com idade reprodutiva. Seu diagnóstico é firmado através do consenso de Rotterdam na presença de dois dos seguintes critérios: anovulação crônica, sinais clínicos e/ou bioquímicos de hiperandrogenismo e presença de micropolicistos nos ovários. Na SOP, além das características específicas da síndrome é comum a presença de marcadores de risco cardiovascular aumentado como dislipidemia, hipertensão arterial, resistência à insulina e obesidade central Objetivos: Analisar a acurácia diagnóstica da circunferência da cintura (CC), relação cintura-estatura (RCEst), razão cintura-quadril (RCQ) e índice de conicidade (Índice C) para detecção de fatores de risco cardiovascular (FRCV) e síndrome metabólica (SM) em mulheres com síndrome dos ovários policísticos (SOP). Metodologia: Foi realizado estudo transversal envolvendo 108 mulheres na faixa etária de 20-34 anos, com diagnóstico de SOP de acordo com o consenso de Rotterdam. Foram considerados parâmetros clínicos, antropométricos e bioquímicos de avaliação do risco cardiovascular. A análise dos dados foi desenvolvida em duas etapas, conforme descrito a seguir. Fase 1: análise da acurácia dos pontos de corte previamente determinados na literatura nacional para CC, RCEst, RCQ e Índice C, para predição de FRCV; Fase 2: determinação de pontos de corte dos índices antropométricos supracitados, específicos para mulheres com SOP, para discriminação de SM, através da análise da curva ROC (Receiver Operating Characteristic). Resultados: Com base nos achados da fase 1 do estudo, a RCEst foi o marcador que apresentou correlações positivas significativas com o xi maior número de FRCV (pressão arterial, triglicerídeos e glicemia após teste oral de tolerância à glicose), além de correlação negativa com HDL-colesterol. Os demais marcadores antropométricos se correlacionaram positivamente com pressão arterial, enquanto CC e RCQ apresentaram correlação positiva também com triglicerídeos. Todos os indicadores antropométricos apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEst que apresentou sensibilidade superior a 70%. Na fase 2 da pesquisa observamos que a CC, RCEst e RCQ apresentaram desempenho semelhante na predição de SM, sendo superiores ao Índice C. Os valores de ponto de corte dos índices antropométricos para discriminar SM foram: CC = 95 cm; RCEst = 0,59; RCQ = 0,88; e Índice C = 1,25. Utilizando esses pontos de corte as taxas de sensibilidade e especificidade da CC e RCEst foram superiores às observadas para RCQ e Índice C. Conclusões: Nossos dados enfatizam a importância da avaliação antropométrica no rastreamento do risco cardiovascular em mulheres com SOP, destacando-se a relevância da RCEst na predição de FRCV clássicos e a necessidade de considerar pontos de corte específicos para mulheres com SOP para discriminação de SM

Contribuições sobre estudos térmicos (TG/DTG, DTA, DSC e DSC-Fotovisual) da rifampicina e seus principais produtos de degradação

Since its synthesis over 48 years rifampicin has been extensively studied. The literature reports the characterization of thermal events for rifampicin in nitrogen atmosphere, however, no characterization in synthetic air atmosphere. This paper aims to contribute to the thermal study of rifampicin through thermal (TG / DTG, DTA, DSC and DSC - FOTOVISUAL ) and non-thermal (HPLC, XRPD , IR - FTIR , PCA) and its main degradation products ( rifampicin quinone , rifampicin N-oxide 3- formylrifamicin). Rifampicin study was characterized as polymorph form II from techniques DSC, IR and XRPD. TG curves for rifampicin in synthetic air atmosphere showed higher thermal stability than those in N2, when analyzed Ti and Ea. There was characterized as overlapping events melting and recrystallization under N2 with weight loss in the TG curve, suggesting concomitant decomposition. Images DSCFotovisual showed no fusion event and showed darkening of the sample during analysis. The DTA curve in synthetic air atmosphere was visually different from DTA and DSC curves under N2, suggesting the absence of recrystallization and melting or presence only decomposition. The IV - FTIR analysis along with PCA analysis and HPLC and thermal data suggest that rifampicin for their fusion is concomitant decomposition of the sample in N2 and fusion events and recrystallization do not occur in synthetic air atmosphere. Decomposition products studied in an air atmosphere showed no melting event and presented simultaneously to the decomposition initiation of heating after process loss of water and / or solvent, varying the Ti initiating events. The Coats - Redfern , Madsudhanan , Van Krevelen and Herwitz - Mertzger kinetic parameters for samples , through the methods of OZAWA , in an atmosphere of synthetic air and / or N2 rifampicin proved more stable than its degradation products . The kinetic data showed good correlation between the different models employed. In this way we contribute to obtaining information that may assist studies of pharmaceutical compatibility and stability of substances

Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Análise da salubridade do meio urbano com base na utilização de índices ambientais: aplicação na bacia de drenagem XII da cidade do Natal-RN

The growing accumulation of people in urban centers caused chronic problems of the cities to begin to take an increasingly unsustainable. Primarily related to lack of infrastructure coupled with sanitation and lack of investment in critical sectors such as health, education, housing and transportation, these problems start to deteriorate markedly the quality of life of city dwellers and put into test management policies of the spaces urbanized. To reverse this situation, shows is essential to the use of tools (highlighting this harvest rates and environmental indicators) that help in assessing the current conditions and may assist in predicting future scenarios. From the information listed above, now put the research seeks to present an index called ISBA Environmental (Sanitation Index) which looks at the four urban systems (water, sewer, solid waste and urban drainage) from the viewpoint of application in a geographical cutout specific - in this case the Drainage Basin XII, defined by the Plan of Urban Drainage Stormwater in the city of Natal, capital of Rio Grande do Norte. This index, together with analysis of other factors sought to trace the current conditions of the basin and thus, assist in proposing the best solutions. For the preparation of the index was applied a questionnaire with a sample of 384 (three hundred eighty-four) households that aimed to study two variables: access to services and satisfaction of the population in relation to these. The ISBA has shown that the system is the most deficient collection and disposal of effluents (ICE = 47.66%), followed by the drainage of rainwater (IDAP = 54.17%), water supply (AAI = 61, 36) and solid waste collection (IRS = 78.28). With the ISBA was possible to verify that the qualitative data shows whose subjectivity is evident (as is the case of user satisfaction) can be of great importance when an assessment, since we obtained the correlation coefficient between the variables "Access" and " Satisfaction "equal to 0.8234, showing a strong correlation between the existence / quality of service offered and the impressions of the population that receives them

Impacto do abastecimento irregular de água nos altos índices de dengue

Dengue fever is an infectious disease that causes thousands of deaths each year in Brazil and other tropical countries. This work demonstrates that the irregularity in the supply of water by public water supply systems is a major factor that contributes to the proliferation of breeding sites of the mosquito that transmits dengue, due to the impossibility of removing water storage tanks. 31 points in the water supply network in thirteen districts of Natal, Brazil, were monitored by the installation of pressure gauges type Datalogger. The data about pressure showed deficiency in water supplies in many neighborhoods, forcing residents to accumulate water in tanks at ground level. In addition, It was observed that in neighborhoods with regular water supply, Infestation Index per type of container (ITR) of type A2 (Deposit ground level) was 0.00% and where there were failures in the supply of water , the ITR was high (above 50%). We believe that policies to combat dengue in Brazil should be reassessed so that more resources can be directed to the improvement of water supply systems and supply companies should be blamed for the problem too

Diagnóstico ambiental das águas do estuário Jundiaí-Potengi pela determinação dos índices de qualidade da água e toxidez

This study is an environmental diagnosis of the Jundiaí-Potengi/RN estuarine system waters, using calculations of pollution indicator indices such as the Water Quality Index (WQI) and the Toxicity Index (TI). The samples were collected at twelve points on the estuary, at high and low tide, between August and November 2007, over four campaigns. The study area, located in a high impact region, has various activities on its banks such as: discharge of untreated or undertreated domestic and industrial sewage, shrimp farming, immunizer stabilization lakes, riverside communities, etc. All the parameters analyzed were compared to the limits of CONAMA Resolution No. 357 of 2005 for healthy and saline Class 1 waters. The results found prove the impact caused by various activities, mainly the parameters related to the presence of organic material, such as DQO, DBO, COT and thermotolerant colliforms. The IQA for most of the collection points was of medium quality. For the metals, although values above the Resolution limits were found, most of them were lower than the detection limits of ICP-OES used, indicating that they tend to be transported by the dynamic of the tides or rainfall and are deposited in bottom sediments, resulting in a TI of 1.0 in this water, when they are absent, which occurs in most cases, or 0.0, when heavy metals are found in these waters

Monitoramento das águas da bacia hidrográfica pirangi pela determinação dos índices de qualidade da água-iqa e índice de toxidez-it

The problems of water supply in Northeast Brazil are severe and require more focused studies. This work was intended to assess water quality in the watershed Pirangi, located in the Northeastern state of the newborn using the Water Quality Index, AQI associated with the Index of Toxicity-IT. The data presented in this study were collected in November 2008, June 2009 and March 2010 at eight sampling stations distributed throughout the basin. The study covered nine parameters, based on guidelines established by CETESB, and seven members of Metal Toxicity index-IT. These waters are framed in the classification between GOOD and BAD showing AQI 41.34 minimum and a maximum of 76.23. Virtually all seven metals analyzed were below the detection limits of ICP-OES giving IT a water equal to one when they are absent and 0 when there are levels of trace metals

Prevalência da disfunção temporomandibular em estudantes de odontologia por meio de diferentes índices

The epidemiology of temporomandibular disorders varies widely in the literature. The aim of this study was to determine the prevalence of TMD in dental students of the Federal University of Rio Grande do Norte assessed by different indexes. The sample consisted of 101 individuals selected by a randomized process, whose general outline was systematic sampling. For evaluation of the signs and symptoms of TMD, an anamnestic index, Fonseca s protocol, and two clinical indexes, the RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders), or standard index, and the Helkimo s Clinical Dysfunction Index were applied. Data were analyzed using the chi-square test and kappa, besides verifying the sensitivity and specificity (5% significance). The diagnosis of TMD by different indexes showed a variation in the prevalence between 72.3% (Helkimo s Clinical index), 64.4% (Fonseca s anamnestic index) and 35.6% (RDC/TMD). There was no statistical difference between the sexes for the RDC/TMD, although this difference was found for Fonseca s and Helkimo s indexes (p<0.05). The most frequent type of TMD were joint disorders (Groups II and III), and the subtypes disc displacement with reduction (17.8%) and arthralgia (15.8%). Most individuals showed a mild TMD (45.5%) for both indexes, Fonseca and Helkimo. When comparing the types of diagnoses, RDC/TMD with Fonseca and Helkimo, low agreement was found (k=0.17 and k= 0.35, respectively). A moderate correlation between the severity of TMD was obtained (kw= 0.53) for Fonseca s protocol and Helkimo s index. High sensitivity and low specificity were seen for both diagnoses compared to standard, resulting in excessive false positives. Within the limitations of the study, it was concluded that the prevalence of TMD can vary widely, depending on the index used for its diagnosis

Contribuição ao estudo de treliças não lineares considerando efeitos térmicos

This work presents the numerical analysis of nonlinear trusses summited to thermomechanical actions with Finite Element Method (FEM). The proposed formulation is so-called positional FEM and it is based on the minimum potential energy theorem written according to nodal positions, instead of displacements. The study herein presented considers the effects of geometric and material nonlinearities. Related to dynamic problems, a comparison between different time integration algorithms is performed. The formulation is extended to impact problems between trusses and rigid wall, where the nodal positions are constrained considering nullpenetration condition. In addition, it is presented a thermodynamically consistent formulation, based on the first and second law of thermodynamics and the Helmholtz free-energy for analyzing dynamic problems of truss structures with thermoelastic and thermoplastic behavior. The numerical results of the proposed formulation are compared with examples found in the literature.

Índices de obesidade central e fatores de risco cardiovascular na síndrome dos ovários policísticos

Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF

Influência de tratamentos térmicos no comportamento mecânico da blenda poli(metacrilato de metila) / poli(tereftalato de etileno) reciclado

Studies indicate that a variation in the degree of crystallinity of the components of a polymer blend influences the mechanical properties. This variation can be obtained by subjecting the blend to heat treatments that lead to changes in the spherulitic structure. The aim of this work is to analyze the influence of different heat treatments on the variation of the degree of crystallinity and to establish a relationship between this variation and the mechanical behavior of poly(methyl methacrylate)/poly(ethylene terephthalate) recycled (PMMA / PETrec) with and without the use of compatibilizer agent poly(methyl methacrylate-al-glycidyl methacrylate-al-ethyl acrylate) (MMAGMA- EA). All compositions were subjected to two heat treatments. T1 heat treatment the samples were treated at 130 ° C for 30 minutes and cooled in air. In T2, the samples were treated at 230 ° C for 5 minutes and cooled to approximately -10 ° C. The variation of the degree of crystallinity was determined by the proportional relationship between crystallinity and density, with the density measured by pycnometry. The mechanical behavior was verified by tensile tests with and without the presence of notches and pre-cracks, and by method of fracture toughness in plane strain (KIC). We used the scanning electron microscopy (SEM) to analyze the fracture surface of the samples. The compositions subjected to heat treatment T1, in general, showed an increase in the degree of crystallinity in tensile strength and a tendency to decrease in toughness, while compositions undergoing treatment T2 showed that the opposite behavior. Therefore, this work showed that heat treatment can give a polymer blend further diversity of its properties, this being caused by changes in the crystal structure