119 resultados para Metricas de desempenho
Resumo:
Currently one of the major concerns in sports is to identify, select, discover and reveal talents in soccer. As principal reasons is perceived the search direct or indirect for resources for players, clubs, media, sports brands and their sponsors. However, high salaries are an exception and not a rule, because the majority of professional players in Brazil receives 1 minimum salary per month. It is also known that on professional clubs, daily, arriving several players to try to be a professional soccer player, however, the majority of clubs - almost all does not present methodological, systematic and analytical aspects to select promising players. The selective processes ("sieves" or "big sieves") developed by technical observers ( olheiros") summarized in the observation of the sportive performance of a big group of players in a period of few minutes given to each player. In this period the target behavior is the ability with the ball. If promising players are identified on that selection, they are referred to the club for a new observation, which will be conducted by the responsible coach of base category in question. It is understood by base categories, the amateur categories (not professional), to serve as a "base" for the formation of the cast of professional clubs. What are sub-13 (under 13 years), sub-15 (under 15 years), sub-17 (under 17 years) and sub-20 (under 20 years). The absence of common criterias and performance indicators of these professionals may hamper the evaluation of promising players, and be a costly activity for the club. This study proposes to identify, characterize and categorize the criterias and methods of behavioral evaluation, used by coaches of base categories of Rio Grande do Norte (RN) to evaluate the sportive performance of young soccer players, with the purpose of to compare the criterias of evaluation of sportive performance of young soccer players, used by coaches with different time of experience in function. The proposal had 2 pilot studies, the first (June and July, 2007) were interviewed 29 coaches, 17 of category sub-13 and 12 of category sub-17. The data were tabulated and organized into spreadsheets in order to describe, and developed a set of descriptors of behavior. And the second (May and June, 2008), with revisions made based on observations, analysis and descriptions found in the first, were interviewed 14 technical of category sub-15. After the results found in pilots, it was possible to outline the study in question, which had 46 coaches base categories of the RN. And from the results show that the characteristic of greatest importance, according to the interviewees was the behavior, the 2nd most important characteristic considered was the motivation, the 3rd was the ability and the 4th was the physical condition and the last was the affiliation. And by analyzing the results to the methods of evaluation of sportive performance used by coaches, it was noted clearly that most uses only the observation to select young soccer players. Therefore, needs a systematization to the selection of soccer players, since there is complexity in the verification of characteristics and aspects involved with purpose to avoid wrong evaluations and selections and the results negligible
Resumo:
The sleep is an active brain process that allows the efficient realization of daily tasks. The changes on sleep patterns may influence the different cognitive processes performance. Many recent studies show the possibility of cognitive performance improvement, through the cognitive training with the use of computer games. The question is if these interventions may be influenced by the sleep quality. Thus, we evaluated the sleep quality effect about the efficacy of an intervention with computers games based on the working memory and attention for a cognitive performance training of elementary school students. The sample was constituted by 42 students with average age of 10,43 years old (SD=1,23), with 22 male participants and 20 female participants. We used to evaluate the sleep with the parents a sleep questionnaire, a sleep diary and the Sleep Behavior Questionnaire. In regard to intervention, the subjectives were distributed in an experimental and in a control group, both with 21 participants. In the first group occurred the intervention that consisted in the working memory and attention training with two cognitive tasks (Safari e Brain Workshop) during 30 daily minutes, for a 6 weeks period. In an equal period, the students from the control group should reproduce an artwork using drawing software. To evaluate the cognitive performance we applied before and after the intervention period the Wechsler Intelligence Scale for Children (WISC-III). The results showed that in both the groups the performance of the intelligence, working memory, attention and visuospatial skills was below of the mean. The cognitive processes evaluated after of intervention in the experimental group had a performance significantly higher in the Perceptual Reasoning Index (t = -6,24; p < 0,01) and in the Full Scale IQ (t = -5,09; p < 0,01) and Performance IQ (t = -6,52; p < 0,01), suggesting a improvement on the visuospatial skills, attention, working memory and processing speed. On the control group, the performance was significantly higher in the Coding subtest (t = -5,38; p< 0,01) and in the Perceptual Reasoning Index (t = -3,66; p = 0,01), suggesting a improvement on the visuospatial skills and attention. The mean obtained with the Sleep Behavior Questionnaire was 53,76 (SD=14,96) for an experimental group and 61,19 (SD=12,82) for a control group, indicating tendency for a bad sleep quality in that last one. Not only during the first days, but also in the last fifteen days of the intervention we verified in the two groups an adequate time to sleep, duration and regularity, in the weekdays and on the weekends. We didn t find significant differences between the two groups in none of the sleep variables. We verified statistically meaningful improvement on the performance of the experimental group with the intervention in the two games. We didn t verify significant correlations between the games performance index and in the sleep variables of the experimental group individuals. We verified significant correlations among the performance on the Brain Workshop and the Cubes subtest, the Perceptual Reasoning Index and the Scale Performance IQ, suggesting that the significant improvement of the visuospatial skills and of the attention was correlated with the performance in the Brain Workshop. Although the absence of correlations with the performance in the Safari, possibly it also has relieved in the improvement of the cognitive performance. The findings support the hypothesis that the computer games might be a satisfactory tool for the improvement of the performance in visuospatial skills and attention. This can be resulted of the insertion of visuospatial stimulations in the task, for example, graphical elements with thematic for children that increase the interest. The IQ below mean the individuals might have influenced the improvement absence on the cognitive processes like the working memory with games. Moreover, it wasn t verified a relation between the sleep quality and the intervention efficacy. It might have been influenced by the n of the sample. Future studies must focalize in the improvement of the effect of the interventions with games
Resumo:
One of the main applications of methane is in the production of syngas, a mixture of hydrogen and carbon monoxide. Procedures used in this process are steam reforming, CO2 reforming, partial oxidation and autothermal reforming. The present study evaluated and compared the behavior of nickel catalysts supported on mixed oxides of cerium and manganese in the partial oxidation of methane with that of nickel catalysts supported on mixed oxides of cerium and zirconium. Mixed oxides of cerium and zirconium or cerium and manganese were synthesized using two different preparation methods, the polymeric precursor based on Pechini method and combustion reaction using a microwave. This was followed by impregnation with nickel content of 15 %. Samples were calcined at 300, 800 and 900 °C and characterized by specific surface area (SSA), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature programmed reduction (TPR) and the reaction of partial oxidation of methane. The specific areas of samples decrease with the rise in calcination temperature and after nickel impregnation. Metal-cerium solid solution was formed and the presence of other manganese species outside the solid solution structure was confirmed in the compound with the highest amounts of manganese oxides showed. With regard to scanning electron microscopy, supports based on cerium and zirconium prepared by Pechini method exhibited agglomerated particles without uniform geometry or visible pores on the surface. However, compounds containing manganese presented empty spaces in its structure. Through synthesis by combustion reaction, morphology acquired independently of the proposed composition demonstrated greater porosity in relation to Pechini synthesis. Although catalysts were prepared using different synthesis methods, the insertion of nickel showed very similar reduction profiles (TPR). In relation to nickel catalysts supported on mixed oxide of cerium and zirconium, there is an initial reduction of NiO species that present certain interaction with the support. This is followed by the reduction of Ce4+ in Ce3+ surface, with subsequent bulk reduction. For catalysts containing manganese, a reduction of nickel oxide species occurs, followed by two stages of reduction for species Mn2O3 in Mn3O4 and Mn3O4 in MnO, with subsequent reduction of bulk. With respect to partial oxidation reactions, the nickel catalyst supported on mixed oxide of cerium and zirconium, prepared using the Pechini method, exhibited CH4 conversion of approximately 80 %, with conversion of 81 % when prepared by combustion. This behavior continued for 10 hours of reaction. Manganese content was also found to directly influence catalytic activity of materials; the greater the manganese oxide content, the faster deactivation and destabilization occurred in the catalyst. In both synthesis methods, the nickel catalyst supported on mixed oxide of cerium and zirconium maintained an H2/CO ratio very close to 2 during the 10 hours of partial oxidation reaction. Samples containing manganese displayed smaller H2/CO ratios and lower performance in partial oxidation.
Resumo:
The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas
Resumo:
The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas
Resumo:
Most cochlear implant (CI) users, who suffer from post lingual hearing loss, are able to perceive sounds and comprehend speech after the implant. The prediction of maximal benefit over time, with the use of CI, can be useful for counseling patients about their expectations in using the new device. The measurement of satisfaction should be of primary interest in medical intervention, as the results may be used for intervention feedback. The purpose of this study is to analyze auditory performance of CI over time, as well as to evaluate users‟ satisfaction. Therefore two types of study designs were employed: a) retrospective cohort study with the analysis of medical records from 59 subjects about auditory performance before and after surgery. Results were submitted to the Kaplan -Meier estimator of cumulative probability and compared to prognostic factors of auditory performance using the logrank test. b) A sectional study design was conducted to evaluate the satisfaction of 51 subjects. The instrument consists of two specific questionnaires: Satisfaction with Amplification in Daily Life SADL and International Outcome Inventory Cochlear Implant IOI- CI. Results show statistical significant differences (p<0,001) in auditory performance before and after CI. The majority obtained satisfactory results of CI use during the first six months. Logrank tests does not indicate significant correlation between the analyzed covariates and the time in which adequate speech perception occurs. SADL e IOI-CI questionnaires indicate that most of the CI users are satisfied with their devices. The SADL detected a 27, 5% insatisfaction amongst CI users in relation to services and costs involved with the CI. The results of the IOI show 4% of insatisfaction with the use of CI and the social environment. In conclusion CI is capable to rehabilitate social auditory function in a short period of time and CI users demonstrate satisfaction with auditory, social and psychological gain offered through CI device
Resumo:
Instruments are used in odontology to measure the Quality of Life Related to Oral Health (OHRQoL) to scale how the oral condition interferes with functional areas, of the people s psychological and social life. This cross-sectional study, held in Natal/RN, with 215 students from the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) has investigated the association between the performance of daily activities and oral health status of school adolescents from 15 to 19 years of age, through the normative index DMFT (permanent teeth decayed, missing and filled), CPI (Community Periodontal Index) and DAI (dental Aesthetic Index) and subjective questionnaire assessment of quality of life related oral health OIDP index (oral impacts on daily performance). It was also carried out the socioeconomic characteristics of students through IFRN own data. Concerning the analysis of data was performed a descriptive analysis of the variables by their absolute and relative frequencies and measures of central tendency. The chi-square test was used to assess the association between the dependent variable and the independent categorical variables and the Student t test for quantitative. It was also conducted a further multiple analysis out using Poisson regression with robust variance between the outcome "presence of impact" and the independent variables that showed p <0.20. It was used for all the statistical tests a significance level of 5%. Among the adolescents surveyed, 51.16% reported that at least one activity assessed by OIDP had hampered its implementation due to some dental problem. The difficulties were more pronounced in the activities of eating (31.6%), oral hygiene (25.6%) and smile (25.1%).The tooth position, followed by toothache, were the causes of the impacts reported by most teenagers. There was a significant association between the presence and impact of the presence of one or more decayed teeth (p = 0.012), the presence of gum bleeding (p = 0.012) and for orthodontic treatment (p = 0.003), independently of other variables. There was no significant association between oral health status and socioeconomic and demographic characteristics of the adolescents. The survey results showed that there is an association between oral health status of the population studied and reports of difficulties in carrying out daily activities evaluated. The worse the oral health status, the greater the impact of this condition on the adolescents quality of life
Resumo:
The use of multi-agent systems for classification tasks has been proposed in order to overcome some drawbacks of multi-classifier systems and, as a consequence, to improve performance of such systems. As a result, the NeurAge system was proposed. This system is composed by several neural agents which communicate and negotiate a common result for the testing patterns. In the NeurAge system, a negotiation method is very important to the overall performance of the system since the agents need to reach and agreement about a problem when there is a conflict among the agents. This thesis presents an extensive analysis of the NeurAge System where it is used all kind of classifiers. This systems is now named ClassAge System. It is aimed to analyze the reaction of this system to some modifications in its topology and configuration
Resumo:
The purpose of this paper is to identify how real estate companies from the city of Natal measure their organizational performance. Traditionally these companies measure their performance using financial measures; however, the technological improvement, the internationalization of the economy and the change in consumer behavior all demand better products and services, and other measuring models. Those changes motivate organizations to continually improve the quality of their products and services. In this way, these companies need to associate their financial results to their global performance. Therefore, it is necessary to have organizational performance models that associate financial and non-financial measures to the strategies of the companies. The research also tries to identify which performance indicators are used by these companies, as well as to test a model who questions: a) if there is any relationship between managers´ characteristics and performance measuring systems´ characteristics; b) if there is any relationship between the company s characteristics and the characteristics of the measuring system used to evaluate its organizational performance and c) finally to verify if there is a relationship between the characteristics of the measuring system and the company s performance. The information which served as a basis for the study was obtained through an empirical research, with questionnaires, answered by 66 (sixty six) companies from the city of Natal, capital of the state of Rio Grande do Norte. The results show that none of the companies investigated use any of the performance measurement models proposed in the modern literature. However, they use on an isolated way some of the measures those models, including some measures from adopted in the Balanced Scorecard, as well as the benchmarking process, making comparisons with the performance of their competitors. The research also reveals that either bigger companies, companies with more experienced managers or with better performance show better performance measurement systems
Resumo:
This study analyzes the perceptions of technical and administrative UFPA, in relation to the insertion of the components and assumptions of DBP in evaluation practice. Addresses the history, concepts, meanings, about AD methods, skills, evaluation skills, the APF and AD UFPA and Programme itself. The research is characterized as a hypothetical-deductive, descriptive and applied, using the case study. Data were analyzed using a quantitative approach, using the descriptive and inferential statistics. Data were collected through the application of questionnaires to 222 technical and administrative searched IFES, not occupants of FG and CD. The results indicate that the factors perceived in relation to the constituent elements such as: evaluation practice, measurement of competence, program management, timing, individual skills and fundamentals of the program and those related to assumptions such as: democratic process, integrative perspective, character development and pedagogical continuous evaluation practices are perceived in the evaluation process. The study concludes that comparing the results of the constituent elements and assumptions of the PAD of thechnical-administrative UFPA, it can be said about a tendency to change, though subtle, compared to the traditional model of AD, directed only to the granting of career progression for a new logic based on the results, showing an early effectiveness of the program evaluation practice by law and by the Institution. The results are confirmatory of advance evaluation practice in the institution, more so than has previously been expected, which demonstrates the value of scientific criteria of scientific research
Resumo:
This thesis aims to identify how civil servants perceive changes made inthe carrying out of their work after their taking part in the Course forTechnicians in Public Management of the Government of Rio Grande do NorteState. As for the methodological procedures, an exploratory-descriptivequantitative research has been carried out through structured questionnaires appliedto 118 civil servants from the first groups of the Course for Technicians, thusshowing a margin of error of 4.18% to 95% of confidence, according to theprocedures of finite sampling. The table processing and analysis rested uponthe Statistical Package for the Social Sciences SPSS and was carried outthrough univariate, bivariate and multivariate techniques with emphasis on thetechnique called Factor Analysis. It was possible to identify that the level ofsatisfaction of the students was high and there was a clear perception by themthat the course assisted to changes in their work. Through Factor Analysis itwas verified that the factors that may be related to changes in the work of thecivil servants are "Contribution to Society", "Efficiency andEfficacy in the Work Environment", "Applicability of Contents"and "Capacitating for Leadership". The conclusion of the studyindicates that the factors obtained are directly related to the basis of thenew public management by means of guidance toward efficiency and efficacy in aperspective of leadership, the contents of the course being thus made into newattitudes toward work which end up yielding better results for society
Resumo:
The chart of control of Hotelling T2 has been the main statistical device used in monitoring multivariate processes. Currently the technological development of control systems and automation enabled a high rate of collection of information of the production systems in very short time intervals, causing a dependency between the results of observations. This phenomenon known as auto correlation causes in the statistical control of the multivariate processes a high rate of false alarms, prejudicing in the chart performance. This entails the violation of the assumption of independence and normality of the distribution. In this thesis we considered not only the correlation between two variables, but also the dependence between observations of the same variable, that is, auto correlation. It was studied by simulation, the bi variate case and the effect of auto correlation on the performance of the T2 chart of Hotelling.
Resumo:
Nowadays, there are many aspect-oriented middleware implementations that take advantage of the modularity provided by the aspect oriented paradigm. Although the works always present an assessment of the middleware according to some quality attribute, there is not a specific set of metrics to assess them in a comprehensive way, following various quality attributes. This work aims to propose a suite of metrics for the assessment of aspect-oriented middleware systems at different development stages: design, refactoring, implementation and runtime. The work presents the metrics and how they are applied at each development stage. The suite is composed of metrics associated to static properties (modularity, maintainability, reusability, exibility, complexity, stability, and size) and dynamic properties (performance and memory consumption). Such metrics are based on existing assessment approaches of object-oriented and aspect-oriented systems. The proposed metrics are used in the context of OiL (Orb in Lua), a middleware based on CORBA and implemented in Lua, and AO-OiL, the refactoring of OIL that follows a reference architecture for aspect-oriented middleware systems. The case study performed in OiL and AO-OiL is a system for monitoring of oil wells. This work also presents the CoMeTA-Lua tool to automate the collection of coupling and size metrics in Lua source code
Resumo:
The seismic reflection is used on a large scale in oil exploration. In case of marine acquisition the presence of high impedance contrast at the interfaces water/air generates multiple reflections events. Such multiple events can mask primary events; thus from the interpretational viewpoint it is necessary to mitigate the multiples. In this manuscript we compare two methods of multiple attenuation: the predictive multichannel deconvolution (DPM) and the F-K filtering (FKF). DPM is based in the periodicity of the multiples while FKF is based in multiples and primaries splitting in F-K domain. DPM and FKF were applied in common-offset and CDP gathers, respectively. DPM is quite sensible to the correct identification of the period and size of the filter while FKF is quite sensible to an adequate choice of the velocity in order to split multiples and primaries events in the F-K domain. DPM is a method that is designed to act over a specific event. So, when the parameters are well selected, DPM is very efficient in removing the specified multiple. Then DPM can be optimized by applying it several times, each time with a different parameterization. A deficiency of DPM occurs when a multiple is superposed to a primary event: in this situation, DPM can attenuate also the primary event. On the other hand, FKF presents almost the same performance to all multiples that are localized in the same sector of the F-K domain. The two methods can be combined in order to take advantage of their associated potentials. In this situation, DPM is firstly applied, with a focus in the sea bed multiples. Then FKF is applied in order to attenuate the remaining multiples