Compósito para fabricação de blocos para construção de casas: estudos térmico e de materiais

We present two models of blocks made of composite material obtained from the use of cement, plaster, EPS crushed, shredded tire, mud, sand and water, for the construction of popular housing. Were made metal molds for the manufacture of blocks to be used in the construction of a residence for low-income families. Performed tests of compressive strength of the composite for various formulations that met the specific standard for blocks used in construction. To study the thermal conductivity of the composite for further study of thermal comfort generated in a residence built with the proposed composite. We also determined the mass-specific and water absorption for each formulation studied. Using a home already built with another composite material, made up the closing of a window with the building blocks and found the thermal insulation, measuring external and internal temperatures of the blocks. The blocks had made good thermal insulation of the environment, resulting in differences of up to 12.6°C between the outer and inner faces. It will be shown the feasibility of using composite for the end proposed and chosen the most appropriate wording

Análise térmica e mecânica de um compósito de matriz cerâmica com carga de EPS e raspa de pneu para construção de casas populares

Space Science was built using a composite made of plaster, EPS, shredded tires, cement and water. Studies were conducted to thermal and mechanical resistance. Inside the mold EPS plates were placed in order to obtain a higher thermal resistance on the wall constructed, as well as to give it an end environmentally friendly in view of both the tire and the EPS occupy a large space in landfills and year need to be degraded when released into the environment. Compression tests were performed according to ABNT blocks to seal, measurements of the temperature variation in the external and internal walls using a laser thermometer and check the temperature of the indoor environment using a thermocouple attached to a digital thermometer. The experiments demonstrated the heat provided by the composite values from the temperature difference between the internal and external surfaces on the walls, reaching levels of 12.4 ° C and room temperature in the interior space of the Science of 33.3 ° C, remaining within the zone thermal comfort for hot climate countries. It was also demonstrated the proper mechanical strength of such a composite for sealing walls. The proposed use of the composite can contribute to reducing the extreme housing shortage in our country, producing popular homes at low cost and with little time to work

Estudo de um compósito de matriz cerâmica com carga de recicláveis para o uso na construção civi

With a view to revitalizing public environments through criteria that include economy, tourism, aesthetics and respect for the environment, this paper proposes a model of kiosk manufactured with composite material blocks, to be employed as a public instrument. . The model consists of a structure composed of planned blocks and manufactured in cement-based composite, gypsum, ground and water, having the styrofoam inside filled with pet bottles of 500 ml dose. The social and environmental issue is the critical point of the work when it can, through the reuse of environmentally harmful materials such as polyethylene terephthalate PET, using such modules for the construction of various areas of Commerce, promoting the protection of the environment combined with the improvement of the quality of life of the population. The tourism factor, which is significant in the economy of the North, is also considered as the modulated kiosk has a visual aspect innovative and differentiated. The environmental issue is addressed by encouraging the reuse of PET material and EPS (polystyrene)

Descarga em barreira dielétrica: construção de um reator DBD e caracterização mediante análises ópticas e elétricas do plasma produzido

The plasma produced by Dielectric Barrier Discharge (DBD) is a promising technique for producing plasma in atmospheric pressure and has been highlighted in several areas, especially in biomedical and textile industry, this is due to the fact that the plasma generated by DBD not reaches high temperatures, enabling use it for thermally sensitive materials. But still it is necessary the development of research related to understanding of the chemical, physical and biological interaction between the non-thermal plasma at atmospheric pressure with cells, tissues, organs and organisms. This work proposes to develop equipment DBD and characterize it in order to obtain a better understanding of the process parameters of plasma production and how it behaves under the parameters adopted in the process, such as distance, frequency and voltage applied between electrodes. For this purpose two techniques were used to characterize distinct from each other. The first was the method of Lissajous figures, this technique is quite effective and accurately for complete electrical characterization equipment DBD. The second technique used was Optical Emission Spectroscopy (EEO) very effective tool for the diagnosis of plasma with it being possible to identify the excited species present in the plasma produced. Finally comparing the data obtained by the two techniques was possible to identify a set of parameters that optimize the production when combined DBD plasma atmosphere in the equipment was built precisely in this condition 0.5mm-15kV 600Hz, giving way for further work

Desenho e Construção de um protótipo gerador de jato de plasma frio a pressão atmosférica para aplicações biomédicas

Research for better performance materials in biomedical applications are constants. Thus recent studies aimed at the development of new techniques for modification of surfaces. The low pressure plasma has been highlighted for its versatility and for being environmentally friendly, achieving good results in the modification of physic chemical properties of materials. However, it is requires an expensive vacuum system and cannot able to generate superficial changes in specific regions. Furthermore, it is limits their use in polymeric materials and sensitive terms due to high process temperatures. Therefore, new techniques capable of generating cold plasma at atmospheric pressure (APPJ) were created. In order to perform surface treatments on biomaterials in specific regions was built a prototype capable of generating a cold plasma jet. The prototype plasma generator consists of a high voltage source, a support arm, sample port and a nozzle through which the ionized argon. The device was formed to a dielectric tube and two electrodes. This work was varied some parameters such as position between electrodes, voltage and electrical frequency to verify the behavior of glow discharges. The disc of titanium was polished and there was a surface modification. The power consumed, length, intensity and surface modifications of titanium were analyzed. The energy consumed during the discharges was observed by the Lissajous figure method. To check the length of the jets was realized with Image Pro Plus software. The modifications of the titanium surfaces were observed by optical microscopy (OM ) and atomic force microscopy (AFM ). The study showed that variations of the parameters such as voltage, frequency and geometric position between the electrodes influence the formation of the plasma jet. It was concluded that the plasma jet near room temperature and atmospheric pressure was able to cause modifications in titanium surface

Construção e avaliação térmica de um fogão solar tipo caixa

The present work presents a contribution in the study of modelings of transference of heat for foods submitted to the experimental tests in the considered solar oven, where the best modeling for the beefburger of chicken in study was evaluated, comparing the results, considering this food as a half-infinite(1er object considered model) and,after that, considered the chicken beefburger as a plain plate in transient regimen in two distinct conditions: not considering and another model considering the contribution of the generation term, through the Criterion of Pomerantsev. The Sun, beyond life source, is the origin of all the energy forms that the man comes using during its history and can be the reply for the question of the energy supplying in the future, a time that learns to use to advantage in rational way the light that this star constantly special tax on our planet. Shining more than the 5 billion years, it is calculated that the Sun still in them will privilege for others 6 billion years, or either, it is only in the half of its existence and will launch on the Earth, only in this year, 4000 times more energy that we will consume. Front to this reality, would be irrational not to search, by all means technical possible, to use to advantage this clean, ecological and gratuitous power plant. In this dissertation evaluate the performance of solar cooker of the type box. Laboratory of Solar Energy of the Federal University of the Great River of North - UFRN was constructed by the group (LES) a model of solar stove of the type box and was tested its viability technique, considering modeling foods submitted when baking in the solar oven, the cooker has main characteristic the easiness of manufacture and assembly, the low cost (was used material accessible composition to the low income communities) and simplicity in the mechanism of movement of the archetype for incidence of the direct solar light. They had been proposals modeling for calculations of food the minimum baking time, considering the following models of transference of heat in the transient state: object the halfinfinite, plain plate and the model of the sphere to study the necessary temperature for the it bakes of bread (considering spherical geometry). After evaluate the models of transmission of heat will be foods submitted you the processes of to it bakes of, the times gotten for the modeling with the experimental times of it bakes in the solar oven had been compared, demonstrating the modeling that more good that it portraies the accuracies of the results of the model

Otimização do tempo e temperatura no processamento da gipsita oriunda dos cristalizadores da produção de sal para obter gesso de uso na construção civil

During the process of the salt production, the first the salt crystals formed are disposed of as industrial waste. This waste is formed basically by gypsum, composed of calcium sulfate dihydrate (CaSO4.2H2O), known as carago cru or malacacheta . After be submitted the process of calcination to produce gypsum (CaSO4.0,5H2O), can be made possible its application in cement industry. This work aims to optimize the time and temperature for the process of calcination of the gypsum (carago) for get beta plaster according to the specifications of the norms of civil construction. The experiments involved the chemical and mineralogical characterization of the gypsum (carago) from the crystallizers, and of the plaster that is produced in the salt industry located in Mossoró, through the following techniques: x-ray diffraction (XRD), x-ray fluorescence (FRX), thermogravimetric analysis (TG/DTG) and scanning electron microscopy (SEM) with EDS. For optimization of time and temperature of the process of calcination was used the planning three factorial with levels with response surfaces of compressive mechanical tests and setting time, according norms NBR-13207: Plasters for civil construction and x-ray diffraction of plasters (carago) beta obtained in calcination. The STATISTICA software 7.0 was used for the calculations to relate the experimental data for a statistical model. The process for optimization of calcination of gypsum (carago) occurred in the temperature range from 120° C to 160° C and the time in the range of 90 to 210 minutes in the oven at atmospheric pressure, it was found that with the increase of values of temperature of 160° C and time calcination of 210 minutes to get the results of tests of resistance to compression with values above 10 MPa which conform to the standard required (> 8.40) and that the X-ray diffractograms the predominance of the phase of hemidrato beta, getting a beta plaster of good quality and which is in accordance with the norms in force, giving a by-product of the salt industry employability in civil construction

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Aplicações das atividades estruturadas de Skemp para a construção do conhecimento matemático

The present study constitutes a discussion about the application of Structured Activities to the construction of the mathematical knowledge, proposed by Richard Skemp. The discussion is based on the research that the author carried out in a public school of the state education chain buy using procedures of the research-action. It investigates the possibility of adoption of the proposal of Skemp in a new reality. It utilizes explanations from several theorists to understand the necessity and, at the same time, to enhance the efficiency of the referred activities in first grades of elementary school when students have their first mathematics teachings. It emphasizes the important rule of the teacher, as mediator to the mental constructions of the child. It presents considerations about the results achieved by the research, noticing the possibility of adoption of the studied proposal even though it is necessary an adjustment of the procedures to appropriate didactic-pedagogic requirements to the educational reality in which this project was done

Construção e aplicação de uma sequência didática para o ensino de trigonometria usando software geogebra

The present study aims to analyze the potentialities and limitations of GeoGebra software on what concerns trigonometry s teaching and learning processes. Taking the present resources of public school from the state of Rio Grande do Norte, the research intends to answer the following question: Could we use the current conditions of public school and the Geogebra software to optimize the trigonometry s learning and teaching processes situation? . To make it a possible to answer the question above, a module of investigative activities was created and applied. The methodological intervention was made among second year High School students from a public school in Natal, RN. The theoretical reference of Mathematics Didactics was taken was a base, adopting the conceptions of Borba and Penteado (2001), Valente (1999) and Zulatto (2002, 2007) about the use of Information Technology (IT) on Mathematics classrooms. In order to create the investigative activities helped us to understand how the students make their constructions and their visual perception through the process of dragging images on the computer screen. Furthermore, the activities done with the GeoGebra software s resources facilitate the resolution of trigonometry situations

Dificuldades na construção de gráficos de funções

This study describes about graduation s students difficulties of to draw functions graph. Specifically, we intend to observe their abilities evolution, as well as their difficulties during Calculus I subject in engineering course. For that, we show them publications about the elaboration of graphs and its difficulties in obstacle terms and some researches witch contain this subject and that it was done during postgraduate studies in mathematical education. It shows by research methodology aspects related to French didatic s mathematic and some theories of cognitive psychology considering the high value between theoretical-methodological relation that was evidenced in both theoretical conceptions about ways to understand and teach mathematic. This methodology is based on didactic engineering purpose, that consist in preliminaries analysis, conception and didactic sequence analysis prior, trials by application followed analysis up and conclusion. We had also used pedagogicals actions and analysis of results achieved, to classify types of errors made by the 2005 s students during second semester, from conceptions related to the episthemologic and didactics obstacles

Utilizando as ciências espaciais e a astronáutica na construção de atividades práticas em ensino de física

In this work we consider the use of new technologies fron the Space Science and Astronautical, in the learning process, incorporating technical and conceptions of physics Spatial what can take on the response of some problems what there are a lot insistent in populate the mind of professors and followers regarding agreement of these conceptions into the level Average. Intending to bring another contribution to Physics teaching practice, especially Classical Mechanics, but introducing many introductory concepts from Modern Physics, since this topic is considered of great interest for teachers and students, for it involves high technology. It s advanced manufacturing demand certain processes that make possible the application of those concepts

O silenciamento no texto jornalístico e a construção social da realidade

This research analyses the silencehood use by the A República journal (Natal/RN), today not being distributed, during the Second World War. Its objective is to unveil the production condition of the news texts, and it was observed that the use of silencehood as a speech strategy with its implications that falls upon the way of behaving and thinking of the society, all that time, influencing the reader in the construction of his image of the reality. During the coverage of the conflict by the local journal it was possible to also observe different speech marks that represented the change in attitude of the Brazilian Government, responsible for the control of what was spread as news. The country lived the dictatorship of the New State and as the war went on the government changed its speech, according to political, social and economical interest s thoughts being played, silencing themes in the name of the national security. We admit as research material journalistic texts that refer to the main facts that occurred during the six years of the world conflict and that is why we used as theoric-metodological support the Speech Analysis

Estratégias argumentativas na construção do discurso ideológico: um estudo da produção didático-pedagógica do meb

This research studies the argumentative process developed by the Basis Educational Movement (MEB), using as corpus the booklet Viver é lutar , and other lesson plans of the Educational Rural Radio from Natal. It has as objectives reveal the argumentative strategies in the discursive production of MEB, exploring the meaning effects suggested by its production conditions, and the ideological positions defended, in addition to this, verify how the booklet and the radio classes dialogued in the argumentation of their theses. So, the study is guided by the Discourse Analysis presuppositions, by the Argumentation Theory, by the conceptions of Popular Education, as well as the conception language dialogical language conception, recurring to Bakhtin (1995). The research adopts the documental characteristic of qualitative nature with an interpretative basis. The analysis of the data permitted us to confirm that the pedagogical didactic material discourse of MEB was produced in a social-historical-ideological context in what the education was seen as a social liberation instrument, being able to transform the Brazilian people and the Brazilian unequal structure. The results reveal that the booklet and the classes assume a position remarkably in favor of the popular classes, structured by the argumentative techniques that intended to convince, and to persuade the auditorium. Thus, the argument was based initially on the convincing of youths and of adults for, afterwards, to construct a persuasion to the learners, in terms of referring to act on the reality to transform it, according to their desires of social justice

Processos de construção do sentido na esquizofrenia: uma perspectiva cognitiva da linguagem

There is still a lot to be said about the relationship between culture, cognition and language. Within an embodied cognition perspective to language, it may be understood that the senses generated and used in discourse are built and negotiated not only linguistically, since they also involve stereotypes, schemes, frames, etc. These cognitive structures, in turn, would emerge from subjects experiences and interactions with a sociohistorically constituted environment. With that in mind, what would happen if someone had an altered view in the perception of such environment? The objective of this master s thesis was to understand the process of meaning construction, aiming at the activation of frames, in the discourse of people who have been diagnosed as schizophrenic and have been hospitalized, that is, individuals who have their socio-environmental perception affected. With that aim in mind, a speech corpus was generated with three schizophrenic patients from Professor Severino Lopes Psychiatric Hospital. The data were collected and analyzed qualitatively, based on the theoretical and analytical premises of Cognitive Linguistics, more specifically, of Simulation Semantic perspective. Therefore, it was possible to identify aspects related to meaning construction processes in the discourse of schizophrenic patients, understanding that language is integrated with cognition and culture. Therefore, the alteration in the way experiences are perceived by schizophrenic patients affect the linguistic production of these subjects. Finally, if we take into consideration that the mental disturbance caused by schizophrenia results in a change in perception of reality by these individuals, we can infer an implication of such factors in language and, subsequently, the interference of such issues in the meaning construction processes in the discourse of patients diagnosed with schizophrenia