Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc

Efeito de variáveis de processo no tempo de fermentação e na concentração das dicetonas vicinais totais

Among the main challenges in the beer industrial production is the market supply at the lowest cost and high quality, in order to ensure the expectations of customers and. consumers The beer fermentation stage represents approximately 70% of the whole time necessary to its production, having a obligatoriness of strict process controls to avoid becoming bottleneck in beer production. This stage is responsible for the formation of a series of subproducts, which are responsible for the composition of aroma/bouquet existing in beer and some of these subproducts, if produced in larger quantities, they will confer unpleasant taste and odor to the final product. Among the subproducts formed during the fermentation stage, total vicinal diketones is the main component, since it is limiting for product transfusion to the subsequent steps, besides having a low perception threshold by the consumer and giving undesirable taste and odor. Due to the instability of main raw materials quality and also process controls during fermentation, the development of alternative forms of beer production without impacting on total fermentation time and final product quality is a great challenge to breweries. In this work, a prior acidification of the pasty yeast was carried out, utilizing for that phosphoric acid, food grade, reducing yeast pH of about 5.30 to 2.20 and altering its characteristic from flocculent to pulverulent during beer fermentation. An increase of six times was observed in amount of yeast cells in suspension in the second fermentation stage regarding to fermentations by yeast with no prior acidification. With alteration on two input variables, temperature curve and cell multiplication, which goal was to minimize the maximum values for diketones detected in the fermenter tank, a reduction was obtained from peak of formed diacetyl and consequently contributed to reduction in fermentation time and total process time. Several experiments were performed with those process changes in order to verify the influence on the total fermentation time and total vicinal diketones concentration at the end of fermentation. This experiment reached as the best production result a total fermentation time of 151 hours and total vicinal diketone concentration of 0.08 ppm. The mass of yeast in suspension in the second phase of fermentation increased from 2.45 x 106 to 16.38 x 106 cells/mL of yeast, which fact is key to a greater efficiency in reducing total vicinal diketones existing in the medium, confirming that the prior yeast acidification, as well as the control of temperature and yeast cell multiplication in fermentative process enhances the performance of diketones reduction and consequently reduce the total fermentation time with diketones concentration below the expected value (Max: 0.10 ppm)

Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

Otimização do tempo e temperatura no processamento da gipsita oriunda dos cristalizadores da produção de sal para obter gesso de uso na construção civil

During the process of the salt production, the first the salt crystals formed are disposed of as industrial waste. This waste is formed basically by gypsum, composed of calcium sulfate dihydrate (CaSO4.2H2O), known as carago cru or malacacheta . After be submitted the process of calcination to produce gypsum (CaSO4.0,5H2O), can be made possible its application in cement industry. This work aims to optimize the time and temperature for the process of calcination of the gypsum (carago) for get beta plaster according to the specifications of the norms of civil construction. The experiments involved the chemical and mineralogical characterization of the gypsum (carago) from the crystallizers, and of the plaster that is produced in the salt industry located in Mossoró, through the following techniques: x-ray diffraction (XRD), x-ray fluorescence (FRX), thermogravimetric analysis (TG/DTG) and scanning electron microscopy (SEM) with EDS. For optimization of time and temperature of the process of calcination was used the planning three factorial with levels with response surfaces of compressive mechanical tests and setting time, according norms NBR-13207: Plasters for civil construction and x-ray diffraction of plasters (carago) beta obtained in calcination. The STATISTICA software 7.0 was used for the calculations to relate the experimental data for a statistical model. The process for optimization of calcination of gypsum (carago) occurred in the temperature range from 120° C to 160° C and the time in the range of 90 to 210 minutes in the oven at atmospheric pressure, it was found that with the increase of values of temperature of 160° C and time calcination of 210 minutes to get the results of tests of resistance to compression with values above 10 MPa which conform to the standard required (> 8.40) and that the X-ray diffractograms the predominance of the phase of hemidrato beta, getting a beta plaster of good quality and which is in accordance with the norms in force, giving a by-product of the salt industry employability in civil construction

Reflexões e contribuições para o ensino de gravitação clássica no nível médio

The subject of Classic Gravitation is part of the actual curriculum for High School in Brazil, and it is taught in the first year of that education level. This master thesis presents a research regarding the subject Classic Gravitation in High School. This research was based in two complementary guidelines of research and action. The first guideline was the analysis of 21 didactic books of physics which are the more frequently used in High School, in the city of Natal/RN. The second guideline, worked after being verified the most common deficiencies presents in the didactic books, was the elaboration, followed by a practical application, of a course suggesting how to approach that subject in the classroom. The Parâmetros Curriculares Nacionais para o Ensino Médio (National Curricular Parameters for High School PCNEM) defend that Classic Gravitation is very important in the student s formation and that its study helps the comprehension of many nature s phenomena. Because of this vision of that subject by the PCNEM, the 21 analyzed books were separated in two groups: the first one, containing 10 books, was edited before the spreading of PCNEM, and the second, with 11 books, after that spreading. Whatever the group to which the didactic books belonged, the great majority of them let that subject in a second plan; two of them even suggesting, in the teacher s orientations, that the subject Gravitation can be suppressed in case of insufficient time . These analyses points that the PCNEM had produced no changes in the conception of the authors that wrote books regarding that subject. To analyze the didactic books, we elaborated a script which was used as an analysis tool, in which we put in evidence the relative importance of the historic and philosophic contextualization of the subject, the quotidian experience of the students and the interdisciplinary approach, among other aspects. It became evident that the didactic books give very little emphasis to historic aspects of the knowledge construction, to the relations with the day-by-day questions and to the interdisciplinary character of the subject Gravitation. It calls attention the non concordance among the authors opinions regarding the necessary previous knowledge or prerequisites the students should fulfill in order to begin to study Gravitation. The course we elaborated was given to a group of teachers as well as to students. In those courses we treated theoretical and practical aspects and emphasized historical questions and the ones which are related to people s daily life. The course for teachers was realized as an extra-mural activity of the UFRN and was given by the author of this thesis at the Escola Estadual Francisco Ivo Cavalcanti (a state public school in Natal/RN). There were 23 teachers present, from several public schools and several fields of knowledge. The thesis supervisor and the master degree s colleagues of the author acted as collaborators , reporting the participants opinions and speeches. The course to the students, on the other hand, had the participation of 300 regular students who belonged to 6 different 1st year classes of the High School Escola Marista de Natal (RN), in which the author acts as a physics teacher. The student s course was realized as part of the regular curriculum activities, in which three classes stood under the responsibility of the author and other three classes in charge of another Marista s teacher, who participated as a collaborator . The teacher s course as well as the students one were given in two stages, with five hours each. The first stage was divided in two moments, the first one focused on the survey of the spontaneous conceptions about gravitation, in which we worked basically with experiments of free throwing and pendulum, and the second one focused in theoretical presentations and quarrels about universe s models. In the second stage of the course we improved the study of Kepler s laws and the Newton s Universal Gravitation law, and we used as motivating tools some practices involving the construction of the solar system in scale. As instruments for evaluating both courses we used questionnaires and reported the speeches with participants opinions, beyond usual written evaluations in the course for the students. The teachers who participated in the course showed very good wills in realizing interdisciplinary practices; nevertheless, according their own speeches, they frequently came across the difficulty of how to do . From the experience we had in both courses, we conclude that the approach we propose hear to the teaching of the subject Classic Gravitation , supported on the tripod theory, practice and historical and philosophical aspects, is viable and effective. One hopes that this research may contribute in the formation of a opinion, among the teachers, concerning how to approach the subject of Classic Gravitation, and may offer suggestions in order those who want to apply that approach may develop classroom practices aiming to improve the teaching of that subject, which has a singular importance in the formation of High School students

A formação inicial do professor de química e o uso das novas tecnologias para o ensino: um olhar através de suas necessidades formativas

La disertación, desarrollada en el Programa de PostGraduación en Enseñanza de las Ciencias Naturales y de la Matemática de la UFRN, estudia las necesidades formativas de licenciandos en Química sobre el uso de las nuevas tecnologías de la información y de las comunicaciones (NTIC), en especial, las relacionadas con la utilización de programas computacionales para la enseñanza de la química. En la actual sociedad del conocimiento, se torna imperativo la eclosión de nuevas formas de aprender y de enseñar, que requieren de nuevas concepciones del trabajo pedagógico. En ese sentido, se exige de los profesores el desarrollo de nuevas habilidades y competencias. El presente trabajo está comprometido con la búsqueda de elementos que puedan nortear los procesos formativos de profesores de química con el objetivo de contribuir con una mejor preparación de la formación inicial, tomando en cuenta sus necesidades de formación. Fue utilizado el cuestionario como instrumento de investigación para diagnosticar y caracterizar las necesidades fomativas, buscando establecer correlaciones entre diferentes variables que cacarterizan el estudio, con el fin de establecer semenazas y discrepancias entre las habilidades docentes en estudio y las necesidades formativas. Los analises de los datos tomo elementos de la estadistica descriptivo e inferencial, con analises multivariados, lo que posibilitó identificar las necesidades formativas. Los resultados muestran ue de forma general los licenciandos evaluan como de bajo, el grado de desarrollo de las habilidades para enseñar usando las NTIC, así como manifiestan sentir necesidades formativas en todas las habilidades referentes a esa esfera del trabajo docente

Aplicações das atividades estruturadas de Skemp para a construção do conhecimento matemático

The present study constitutes a discussion about the application of Structured Activities to the construction of the mathematical knowledge, proposed by Richard Skemp. The discussion is based on the research that the author carried out in a public school of the state education chain buy using procedures of the research-action. It investigates the possibility of adoption of the proposal of Skemp in a new reality. It utilizes explanations from several theorists to understand the necessity and, at the same time, to enhance the efficiency of the referred activities in first grades of elementary school when students have their first mathematics teachings. It emphasizes the important rule of the teacher, as mediator to the mental constructions of the child. It presents considerations about the results achieved by the research, noticing the possibility of adoption of the studied proposal even though it is necessary an adjustment of the procedures to appropriate didactic-pedagogic requirements to the educational reality in which this project was done

Uma abordagem histórica para o ensino do princípio da inércia

Placed in the field of Didactic of Science, this paper proposes an approach to the introduction of the History of Science in science education, at high school level. It was designed and implemented a series of activities regarding the history of the Principle of Inertia. The aim of this approach was to give more meaning to scientific education, while opening new avenues for a better understanding of the processes of construction of scientific knowledge. The preparation of the activities involved a study of the historical development of the concept of motion, from the Aristotelian physics through physical movement concepts at medieval period, from Galileo, Gassendi, Descartes, until the first law of Newton. The strategy of teaching was applied to three classes of high school (night period) of a state public school at the city of Natal (RN). The results indicated the difficulty of overcoming alternative conceptions about movement by students. Nevertheless, we consider that the implementation of this strategy of teaching both represented gains for the learning of students, and contributed to the resizing of pedagogical practices of the teacher-researcher

Um hipermídia sobre fases da lua para o ensino de astronomia a distância

The interdisciplinary nature of Astronomy makes it a field of great potential to explore various scientific concepts. However, studies show a great lack of understanding of fundamental subjects, including models that explain phenomena that mark everyday life, like the phases of the moon. Particularly in the context of distance education, learning of such models can be favored by the use of technologies of information and communication. Among other possibilities, we highlight the importance of digital materials that motivate and expand the forms of representation available about phenomena and models. It is also important, however, that these materials promote the explicitation of student's conceptions, as well as interaction with the most central aspects of the astronomical model for the phenomenon. In this dissertation we present a hypermedia module aimed at learning about the phases of the moon, drawn from an investigation on the difficulties with the subject during an Astronomy course for teaching training at undergraduate level at UFRN. The tests of three semesters of course were analyzed, taking into account also the alternative conceptions reported in the literature in astronomy education. The product makes use of small texts, questions, images and interactive animations. Emphasizes questions about the illumination of the Moon and other bodies, and their relationship to the sun, the perception from different angles of objects illuminated by a single source, the cause of the alternation between day and night, the identification of Moon's orbit around the Earth and the occurrence of the phases as a result of the position of observing it, and the perception of time involved in the phenomenon. The module incorporated considerations obtained from interviews with students in two poles where its given presential support for students of the course, and subjects from different pedagogical contexts. The final form of the material was used in a real situation of learning, as supplementary material for the final test of the discipline. The material was analyzed by 7 students and 4 tutors, among 56 users, in the period in question. Most students considered that the so called "Lunar Module" made a difference in their learning, the animations were considered the most prominent aspect, the images were indicated as stimulating and enlightening, and the text informative and enjoyable. The analysis of learning of these students, observing their responses to issues raised at the last evaluation, suggested gains in key aspects relating to the understanding of the phases, but also indicates more persistent difficulties. The work leads us to conclude that it is important to seek contributions for the training of science teachers making use of new technologies, with attention to the treatment of computer as a complementary resource. The interviews that preceded the use of the module, and the way student has sought the module if with questions and/or previous conflicts - established great difference in the effective contribution of the material, indicating that it should be used with the mediation of teacher or tutor, or via strategies that cause interactions between students. It is desirable that these interactions are associated with the recovery of memories of the subjects about previous observations and models, as well as the stimulus to new observations of phenomena

A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

História da matemática na formação do professor: dificuldades e sugestões

This work is the result of a study that aimed to start scoring difficulties that the math teacher is trying to get a historical formation. Considering that the textbook is the material with which the teacher has more contact, start with reading historical texts present in these books. Choose a theme and choose from that we observed limitations ranging from the search for sources of research in relation to the actual historical content. There are many studies that show the importance of the history of mathematics in teacher education and also in the teaching and learning of mathematics. These works , in particular the work of Feliciano (2008 ) entitled : " The use of history of mathematics in the classroom " , along with the information , experiences and opinions given by Professor Anderson Luís de Azevedo Paulo , in some meetings , point to need for materials for teaching , since they show that recognizes the importance of this knowledge and the ability to use it in the classroom , but several factors have pushed aside , even the texts present in textbooks. From the analysis of some of the work and contributions of Professor Anderson Paulo we pointed out some of the factors that make historical texts being ignored by teachers and among them are characteristics in appearance and content in the text. To assist in the preparation of materials that meet the expectations of the teacher, we present a manual with suggestions and / or features to choose or produce a good text. These suggestions can make the history books more enjoyable and thus approach the teacher of historical knowledge and later encouraged to seek, in fact, a historical formation

O portfólio na formação inicial do professor reflexivo de inglês como língua estrangeira: uma análise sistêmico-funcional

This research deals with the insertion of the portfolio as a resource to the development of the reflective action in training teachers of English as a Foreign Language (EFL). Its goal is to characterize linguistic marks that show the reflective process in learning narratives collected in portfolios following the considerations of the ideational metafunction of the Systemic-Functional Grammar (SFG) by Halliday (1994). Within the scope of analysis offered by SFG, the system of transitivity was chosen attempting to observe and study the lexicogrammatical choices made by participants to produce their learning narratives. The corpus was composed of twenty-six learning narratives produced by thirteen participants into two distinct modules, designated here as "First Assessment" and "Final Assessment. The analysis were performed using procedures related to Corpus Linguistics, with the aid of the computer resource WordSmith Tools 5.0 (Scott, 1999). The results seems to indicate that preservice teachers, when asked to reflect on activities written on the classroom, use in their narratives a significant majority of mental processes instead of material processes that are common in narratives from other nature. Meanwhile, the use of a portfolio in teacher training in EFL, can be considered as a trigger reflection tool, which allows future teachers' effective monitoring of all their learning process

Interação em sala de aula de língua inglesa: o feedback como estratégia do desempenho assistido

This dissertation aims at characterizing the practices as well as the effects of a teacher s feedback in oral conversation interaction with students in an English Language classroom at a Primary School, 6th Grade in Açu/RN, Brazil. Therefore, this study is based on Vygotsky s (1975) and Bruner´s (1976) researches, which state that the learning process is constructed through interaction between a more experienced individual (teacher, parents and friends) and a learner who plays an active role, a re-constructor of knowledge. It is also based on Ur´s (2006) and Brookhart s (2008) studies (among other authors in Applied Linguistic) who defend that the feedback process needs to be evaluative and formative since it sets interfaces with both students autonomy and learning improvement. Our study is based on qualitative, quantitative and interpretive researches, whose natural environment (the classroom) is a direct source of data generated in this research through field observations/note-taking as well as through the transcriptions of five English classes audio taped. This study shows the following results: the teacher still seems to accept the patterns of interaction in the classroom that correspond to the IRE process (Initiation, Response, Evaluation) in behaviorist patterns: (1) he speaks and determines the turns of speech; (2) the teacher asks more questions and directs the activities most of the time; (3) the teacher´s feedback presents the following types: questioning, modeling, repeated response, praise, depreciation, positive/negative and sarcasm feedback, whose functions are to assess students' performance based on the rightness and wrongness of their responses. Thus, this implies to state that the feedback does not seem to help students improvement in terms of acquiring knowledge because of its normative effects/roles. Therefore, it is the teacher´s role to give evaluative and formative feedback to a student so that he/she should advance in the learning of the language and in the construction of knowledge

A organização da interação professor-aluno em sala de aula: turnos e o par pergunta-resposta

Este trabalho tem como foco principal a interação em sala de aula, especificando aspectos da organização linguístico-discursiva, na produção conjunta da fala da professora e dos alunos, materializada em turnos, ressaltando o par pergunta-resposta na aula de Língua Portuguesa. Para alcançarmos esse objetivo, inspiramo-nos em alguns trabalhos acerca da organização da interação que adotaram a perspectiva dos estudos interacionais e a abordagem etnográfica, a fim de explicitar o conhecimento nos espaços de ensino e aprendizagem. Entre eles, citamos as pesquisas de Galvão (1996, 2004) e de Matêncio (2001). Nessa direção, descrevemos o processo de interação em sala de aula em uma escola pública, analisando e interpretando as ações de linguagem realizadas pela professora e pelos alunos. Teoricamente, embasamo-nos, principalmente, na Análise da Conversação, ancorando-nos no estudo pioneiro de Sacks, Schegloff e Jefferson ([1974] 2003); nos postulados de Marcuschi ([1986] 2007a); nas pesquisas de Kerbrat-Orecchioni (2006), dentre outros. Explicitamos uma tipologia de perguntas e respostas em sala de aula, quanto à sua forma e função, conforme os postulados teóricos de Stubbs (1987), Araújo (2003), Fávero, Andrade e Aquino (2006), Silva (2006) e Koshik (2010). Analisamos a organização da tomada de turno, seguida de uma investigação sobre perguntas e respostas no discurso desenvolvido face a face. Na tentativa de compreendermos o cotidiano dos envolvidos no cenário de sala de aula, adotamos a abordagem etnográfica e o método indutivo, nas perspectivas de André (2010) e Chizzotti (2006). Os dados foram gerados através de pesquisa de campo, por meio de gravações (em áudio) de aulas de Língua Portuguesa, posteriormente transcritas e transformadas no corpus de pesquisa. As análises demonstraram que a interação entre professora e alunos organizou-se em trocas de turnos, na maioria das vezes, controladas pela professora, evidenciando-se uma relação de assimetria entre os participantes. Esses turnos concretizados, geralmente, no par adjacente pergunta-resposta revelaram como a construção do conhecimento se realiza em sala de aula. Por fim, observamos que a interação em sala de aula de Língua Portuguesa é organizada por aspectos sociais e pedagógicos intrinsecamente imbricados