Uso e ocupação do solo e a transformação da paisagem na faixa litorânea da Via Costeira, município de Natal/RN

The coastal area of the city of Natal due to its location and natural potentialities has been an area where we have experienced big changes in its environment, at the expense of several forms of use and human occupation. On the coast of Via Costeira beach the process of use and land occupation was structured at the end of 1970s and early 1980s, as a result of the government policy which has developmental essence, based on the settlement of plenty big enterprises by the Parque das Dunas/Via Costeira Project. This project was created to install in Natal, capital of the state, infrastructure equipment on this stretch of coastline consisted of dune fields and many parts of ecosystems which have high natural relevance and fragility that used to present a semi-isolation in the urban city, for the development of tourist activities, which is considered as a viable economic solution capable of setting right serious socioeconomic problems that had persisted there. According to what was said so far, this study aimed to analyze the forms of use and land occupation besides the change of the landscape along the Via Costeira coast in the city of Natal/RN. These changes often take place without considering the complexity and fragility of natural ecosystems involved. The geoenvironmental study was based on the geosystemic theory, thus It was possible to analyze the human interventions in the superficial aspects of landscapes holistically. The practical procedures were contemplated with literature searches, followed by field work where were fulfilled the recognition and general characterization of the area in order to investigate and analyze the main types of land occupation and its use that have taken place there since big buildings began to come out, being supported by the legislation whose laws are about protection and conservation of coastal natural resources. The research also includes the identification and evaluation of the main types of negative impacts caused due to different forms of use that induce environmental and social conflicts nearby this shore. Thus, It was carried out a spatial and multitemporal analysis from orthophotos, aerial photographs and others taken during the field work besides satellite images too. The information which is taken out from these instruments was used to draw maps related to land occupation, spatial impacts and other thematic maps. We worked on a hypothesis that the implementation of mega enterprises on Via Costeira and many different forms of intensified use by human actions, has not considered the natural aspects and restrictions of use in this area, these ones would be the main factors that brought on the suppression and degradation in this environment and consequently the transformation of the natural landscape.

Avaliação da potencialidade de incorporação de um lodo de uma indústria de produtos de limpeza como adição mineral em concretos de cimento Portland

The generation of industrial wastes has been increased more and more in recent decades, motivating studies about a correct sustainable allocation and that also represents advantages for their generators. In this context, are included two companies of cleaning products niche, located in São José do Mipibu/RN, that produces industrial sludge at a sewage treatment plant, and that is the main approach of this research. Given this, it was studied the incorporation potentiality of this sludge as a mineral addition in cement matrix for concrete production due it high capacity of wastes immobilization inside this material, which are subsequently used in the company for making precast articles. Were added different sludge concentrations (5, 10, 15 and 20%) in a common trait (1: 2: 3), and evaluated their techniques and microstructural implications via workability test in fresh state and compressive strength, full porosity and scanning electron microscopy (SEM) in the hardened state. The results demonstrated the feasibility of the process both from a technical and environmental view as economical. All concretes produced with residue showed an increase of workability given the nature of the waste that had surfactants substances capable of adsorbing tiny particles of air into the batter. However, for all concentrations were obtained lower compressive resistances than standard concrete, with a reduction of 39% for samples with 20% of sludge. This are attributed mainly to an increase of porosity in the transition zone of these material, resulting from increased formation of ettringite at the detriment to the formation of other compounds, but which still allows the use of these for the manufacture of concrete articles with non-structural nature, such as precast floor. In addition, the water absorption and void ratio increased slightly for all samples, except the concrete with 20% of waste that has a reduction for the last parameter. Given this context, the recommended maximum level is 20%, constituting a significant proportion and able to allocate sustainably all waste generated in the industry.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Duplicação rápida de prótese total: passo-a-passo

This study presents a simple, fast and low cost technique for fabrication new conventional dentures from the duplication of old prosthesis in use by the patient. Colorless acrylic resin was poured into the moulds obtained by duplication of prosthesis. With the replicas obtained a functional impressions using polyether should be performed and they are stabilized with occlusal registration in acrylic resin. The molds need to be castings and mounted on an semi-adjustable articulator. The artificial teeth are positioned with the assistance of a guide made condensation silicone to reproduce the positioning of the teeth of the old prosthesis and fixed with wax 7. After approval of the teeth on the trial in wax, without adjustment of the planes, the prosthesis may be processed in the laboratory. After occlusal adjustment in the articulator the same can be installed.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Eficiência mastigatória e qualidade das próteses totais confeccionadas pelas técnicas tradicionais e simplificada: um ensaio clínico

Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.

Eficiência mastigatória e qualidade das próteses totais confeccionadas pelas técnicas tradicionais e simplificada: um ensaio clínico

Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.