Os condomínios horizontais fechados e as transformações socioespaciais na cidade de Natal/RN/

The process of urbanization of Natal city has been going in the last years by importants changes, mainly, because we can observe the development of a new kind of housing: the horizontal closed condominiums, from 1995 began to expand quickly on the city. In this way, the present study has as objective analyse the expansion of the horizontal closed condominiums on the urban area of Natal. Emphasizing the sociogeographic changes that these ventures engender. For this, we have done a research that was based on quantitative procedures, however, preferring a qualitative approach. So, data were gathered from sources and procedures: the first, we performed a literature search and document on issues related to the relevant issues in libraries, public and privates institutions; The second, in accordance with the procedures, or the production of informations, performed enterview and implemetation of questionnaires with key stakeholders involved with the expansion of horizontal condominiums in Natal. Within this perspective, our research showed that the expansion of demand in the city, the existence of volume of land in areas suitable for the production building, the formation of capital property, the appearance of new points of modern consumption, the actions of the state and the low cost of production of these enterprises, are factors that have been decisive in the expansion of the horizontal condominiums in Natal. Also, we can observe that the process of production of the urban space from the horizontal condominiums comes in providing the redefinition of land use in areas that appear, because they expand into outlying areas of Natal, changes in its structure and its pattern of socio segregation, observing that the condominiums put the diferents social groups living side by side, but not mantaining relationships among them, the emergence of spaces to homogenization, the fragmentation of the urbanization, the privatization of the city and several environmental problems. In short, we believe that the horizontal expansion of condominiums is enabling a number of social changes to Natal city

As faces da exclusão social na comunidade África - Natal, RN

This dissertation deals with the study of the faces of social exclusion at present, through a spatial section constituted of a subnormal area (the Community Africa), which groups these aspects in a limited, but revealing, context regarding such problems. Through the following chapters, inequality, exclusion, segregation, the socioeconomics of the Community Africa, and the environmental impacts identified in this community are discussed. At the end of this piece of work, alternatives of possible solutions to the community area pointed, with also the discussion of propositions related to the questions concerning the mitigation of the most relevant problems

Análise da vulnerabilidade ambiental no estuário do Rio Curimataú/Cunhaú, Baía Formosa e Canguaretama - RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Fragilidade ambiental da bacia hidrográfica do Rio Punaú (RN) e área litorânea adjacente

Hydrographic basins always exercised a big fascination over humankind that attracted for its scenery beauty or for its richness in natural resources, had been acting in order to modify these important ecosystems without, therefore, considering the possible consequences of these changes. The attributed importance to the coast ecosystems, in eminence to the hydrographic basin of Punaú river and adjacent areas, is had when it s verified the diversity of the ecosystems that contemplate it. Hydrographic basin in evidence in Rio Grande do Norte state, occupies an area of nearly 652.71 km², being it sited in the homogeneous micro-region Litoral Nordeste, with a regional population estimated in nearly 75,188 inhabitants, according to the Anuário Estatístico do Rio Grande do Norte 2004. The region of the researched basin is formed by seven municipal districts related as it follows: Maxaranguape, Pedra Grande, Pureza, Rio do Fogo, São Miguel de Touros, Taipu and Touros, but Maxaranguape, Rio do Fogo, Touros and Pureza have a direct participation in the basin. Basin in study have it lands evaluated according to the agriculturist aptitude by the conventionally methodology practiced in the country, having as objective, then, a compara-tive analysis between the ambient unities, Aeolian littoral and coast tray, identified in the researched area. From the characterization of the physic way of the area in study and owning the kept data, it was proceeded the integrated analysis of the structural elements of the landscape which were evidenced that the fragile areas are associated with the areas of agriculture cultivation, such as the ones of irregular occupation. About the degradation, the ambient diagnostic of the basin indicated that the equivalent to the Aeolian Littoral Ambient Unit correspond to the bigger pledging of the ambient quality, in other words, high ambient fragility, being this result due to the use and occupation of the soil, propitiating this way, vulnerability in the vegetal cover of the area, despite it disposes of a low agriculture cultivation percentage. Already in the Coast Ambient Tray, is emphasized the medium ambient fragility, despite of the high index of cultivated area. In a general way, the total area of the hydrographic basin of Punaú river and adjacent areas presented ambient impacts over the tolerance limit, indicating the necessity of a review of the practices of use and handling of the soil, reforesting of the water courses edges, control of erosion and contamination of the aqueous in the perspective to reduce the effects of the impacts due to the use and occupation of the basin in regard. The present search evaluated the ambient impacts diagnosised in the hydrographic basin of Punaú river and adjacent areas, pointing the causes and the probable consequences of the damages caused by these impacts to the basin ambient. From the analysis of these data, if was possible to become explicit how they are fundamental as key elements in the process of decision taking in the ambient questions

Estudo comparativo de diferentes sistemas de injeção de vapor aplicados à remediação de solos contaminados por diesel

Among the potentially polluting economic activities that compromise the quality of soil and groundwater stations are fuel dealers. Leakage of oil derived fuels in underground tanks or activities improperly with these pollutants can contaminate large areas, causing serious environmental and toxicological problems. The number of gas stations grew haphazardly, without any kind of control, thus the environmental impacts generated by these enterprises grew causing pollution of soil and groundwater. Surfactants using various techniques have been proposed to remedy this kind of contamination. This study presents innovation as the application of different systems containing surfactant in the vapor phase and compares their diesel removal efficiencies of soil containing this contaminant. For this, a system that contains seven injection wells the following vaporized solutions: water, surfactant solution, microemulsion and nanoemulsion, The surfactants used were saponified coconut oil (OCS), in aqueous solution and an ethoxylated alcohol UNTL-90: aqueous solution , and nanoemulsion and microemulsion systems. Among the systems investigated, the nanoemulsion showed the highest efficiency, achieving 88% removal of residual phase diesel, the most ecologically and technically feasible by a system with lower content of active matter

Expressão heteróloga de biossurfactantes identificados em bibliotecas metagenômicas

The microorganisms have a vast genetic diversity and they are present throughout the biosphere, however, only about 1% of the species can be cultivated by traditional cultivation techniques. Within this diversity there is a huge pool genetic and biological being explored. The metagenomics has enabled direct access to microbial genome derived from environmental samples using independent methods of cultivation. The methodology enables to obtain functional information about the proteins, as well as identify potential products with biotechnological interest and new industrially exploitable biological resources, such as new solutions to environmental impacts. Oil-contaminated areas are characterized by a large accumulation of hydrocarbons and surfactants may be used for bioremediation. Thus, the metagenomic approach was used in this study in order to select genes involved in the degradation and hydrocarbon emulsification. In a previous work, the environmental DNA (eDNA) was extracted from soil samples collected from two different areas (Caatinga and Saline River) of Rio Grande do Norte (Brazil), the metagenomic libraries were constructed and functionally analyzed. The clone able to degrade the oil was evaluated for the ability to synthesize biosurfactants. The sequence analysis revealed an ORF with 897 bp, 298 amino acids and a protein with around 34 kDa. The search for homology in GenBank revealed sequence similarity with a hypothetical protein of representatives Halobacteriaceae family, who were recently shown as strains producing biosurfactants. The presence of the inserted coding sequence and the acquired phenotype was confirmed. Primers were designed and the ORF amplified by PCR. The ORF was subcloned into pETDuet-1 expression vector for subsequent purification of the protein of interest containing a histidine tail. The tests performed to confirm the biosurfactant activity and the ability of hydrocarbon degradation showed positive results. The immunodetection test (western blot) using the monoclonal AntiHis® confirmed the presence of the environmental protein. This study was the first to report a possible protein with biosurfactant activity obtained from a metagenomic approach

Utilização do resíduo grosso do beneficiamento da scheelita em aplicações rodoviárias

Mining is an activity of great economic and social value, assisting in the development of the country. However, it can be extremely harmful to the environment if no proper waste management study exists as mitigation measure its effects. Sample some of these harmful effects are pollution: water, through the seepage of waste into the groundwater; soil; of fauna and flora; sound (due to the noise of machines); visual from the residue stored in the open, changing the local landscape; and air. One way to mitigate environmental impacts caused by mining is the proper management of their waste through their use on highways. To that end, this paper proposes to give an appropriate destination to grit coming from the beneficiation of scheelite, due to mining activity from mining group Tomaz Salustino in Brejuí mine, located in the city of Currais Novos in the state of Rio Grande do Norte. This work was developed in four stages. The first comprised the chemical and mineralogical tests, DRX and FRX in which they sought to discover the composition of the material studied. The next step involved the physical characteristics of the waste by means of specific tests and grinding the solid mass, LL and LP. The third stage included the specific tests applied to the pavement, with the compaction test and test Index Support California. Finally, the fourth stage was the mechanical characterization, represented by direct shear tests, both in the flooded condition and not in flooded condition. The technical feasibility of using the modified energie compacted in layers of subbase power has been verified. In normal and intermediate energies is feasible to use less noble as layers as the subgrade. The incorporation of the waste in layers of road pavements provide an alternative to conventionally used in paving aggregates, providing a proper disposal of tailings from scheelite, as well as environmental preservation

Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)

Aplicação da tecnologia eletroquímica para a remoção e monitoramento de metais pesados em efluentes aquosos

Heavy metals are present in industrial waste. These metals can generate a large environmental impact contaminating water, soil and plants. The chemical action of heavy metals has attracted environmental interest. In this context, this study aimed to test t he performance of electrochemical technologies for removing and quantifying heavy metals. First ly , the electroanalytical technique of stripping voltammetry with glassy carbon electrode (GC) was standardized in order to use this method for the quantificatio n of metals during their removal by electrocoagulation process (EC). A nalytical curves were evaluated to obtain reliability of the determin ation and quantification of Cd 2+ and Pb 2+ separately or in a mixture. Meanwhile , EC process was developed using an el ectrochemical cell in a continuous flow (EFC) for removing Pb 2+ and Cd 2+ . The se experiments were performed using Al parallel plates with 10 cm of diameter (  63.5 cm 2 ) . The optimization of conditions for removing Pb 2+ and Cd 2+ , dissolved in 2 L of solution at 151 L h - 1 , were studied by applying different values of current for 30 min. Cd 2+ and Pb 2+ concentrations were monitored during electrolysis using stripping voltammetry. The results showed that the removal of Pb 2 + was effective when the EC pro cess is used, obtaining removals of 98% in 30 min. This behavior is dependent on the applied current, which implies an increase in power consumption. From the results also verified that the stripping voltammetry technique is quite reliable deter mining Pb 2+ concentration , when compared with the measurements obtained by atomic absorption method (AA). In view of this, t he second objective of this study was to evaluate the removal of Cd 2+ and Pb 2+ (mixture solution) by EC . Removal efficiency increasing current was confirmed when 93% and 100% of Cd 2+ and Pb 2+ was removed after 30 min . The increase in the current promotes the oxidation of sacrificial electrodes, and consequently increased amount of coagulant, which influences the removal of heavy metals in solution. Adsortive voltammetry is a fast, reliable, economical and simple way to determine Cd 2+ and Pb 2+ during their removal. I t is more economical than those normally used, which require the use of toxic and expensive reagents. Our results demonstrated the potential use of electroanalytical techniques to monitor the course of environmental interventions. Thus, the application of the two techniques associated can be a reliable way to monitor environmental impacts due to the pollution of aquatic ecosystems by heavy metals.

Caracterização de resíduos oriundos do beneficiamento do minério de ferro para uso em pavimentação

Mining in Brazil has a key role in economic and social development, contributing directly to improve the lives of the population. However, the mining activity even if done responsibly and with a proper study of waste management to reduce the impact of its effects, may cause harmful damage to the environment. Other forms of pollution are also caused due to mining activity. The visual pollution caused by the waste storage at open sky, in addition to the noise pollution caused by the excessive noise of the machines both in the extraction of ore, as in processing. An alternative way to lessen the environmental impacts caused by mining is the use of waste in layers that will compose the pavements along the highways. Thus, this work sets out to give a proper disposal of the wastes from the processing of iron ore, resulting from the mining activity of the group of mining Mhag Services and Mining S/A, in the mine of Bonito, located in Jucurutu, a town in the state of Rio Grande do Norte. The residues of the iron ore were stabilized with a granular soil from the city of Macaiba, also in the state of Rio Grande do Norte, which is being used in the duplication of the BR-304 referring to the entitled passage of Reta Tabajara. The present work was developed in three stages, being the first one divided by the chemical and mineralogical tests, by the tests of physical characterization and by the tests of paving for the residues of the iron ore. The second stage corresponds to the same tests being performed for granular soil. The third stage includes the essays abovementioned for three different mixtures of iron ore waste and granular soil, being they: 15% of iron-ore waste and 85% of granular soil, 25% of iron-ore waste and 75% of granular soil, 50% of iron-ore waste and 50% of granular soil. The technical feasibility of using waste from the iron ore beneficiation was checked, compressed in the intermediate energy and modified for use in base layers, sub-base, reinforcement subgrade and subgrade. The incorporation of the residues originating from the improvement of the iron ore in highways will provide an alternative to the use of aggregate conventionally used in the paving, besides preserving the environment.

Água residuária da mandioca como fertilizante orgânico em pasto de Brachiaria brizantha cv. Marandu

Brazil is the world's second largest producer of cassava, which most of the production is used to make flour and starch, generating large amounts of waste, cassava. In general, this waste is disposed of directly into the soil and waterways, causing serious environmental impacts. In view of this, the aim of this work was to evaluate the use of cassava wastewater water (cassava) as organic fertilizer in Brachiaria brizantha pasture. Marandu. The experiment was conducted at the Campus Macaíba the Federal University of Rio Grande do Norte. The treatments were increasing rates of cassava, applied to the soil as organic fertilizer. The experimental design was a randomized block design with six treatments and four replications. The treatments consist of cassava doses (0, 15, 30, 60 and 120 m³ ha- 1 ) and a treatment with mineral fertilizer (AM) in the form of NPK (140: 30: 120 kg ha-1 ). Three cuts with an interval of 60 days were carried out. The variables evaluated were: plant height; accumulation of morphological components of fodder; Trapping Light (IL); Leaf Area Index (LAI); Total chlorophyll (CT); Feature Production Seca (PMS). The dry matter production at a dose of 120 m³ha-1 had a quantitative increase, with a total production in 2796 kg ha-1 DM in the second cut, providing an increase of 493% compared to control, and the residual effect observed in the third cut caused a 100% increase compared to 0 m³ ha-1 . Comparing the PMS obtained with the use of AM and other treatments it was observed that it was the second cut equivalent to a dose of 120 m³ ha-1 and the third equivalence has been cut at doses 60 and 120 m³ha-1. For the variables plant height, IL, IAF, CT and leaves Mass adding cassava in the soil promoted a positive linear increase for the three cuts. However, with the AM the IAF was superior to the other treatments. The thatched mass reached its highest production (838 kg ha-1 DM) in the second cut when using a dose of 120 m³ha-1 . In dead material mass in the second and third sections, there was increased linearly increased total of 322 and 452% respectively, compared to a dose of 0 m³ha-1 . The use of cassava showed herbicidal effect for the variable mass of the undesirable negative linear response resulting in decreasing the amount of residue with increasing doses. Manipueira can be used as organic fertilizer in Brachiaria brizantha cv. Marandu for improvements in the productive characteristics, as promoted significant increases in 8 most of the variables studied, especially at a dose of 120 m³ha-1 . This benefits the environment by being alternative for disposal of cassava.

Tratamento de cascalho de perfuração utilizando sistemas microemulsionados

The oil industry is one of the activities that generates more waste to the environment. The drill cuttings is a waste generated in large quantities in the drilling process and that may cause environmental damage such as soil contamination and consequently the contamination of groundwater if disposed of without prior treatment. Arises the need to develop scientific activities and research ways to adapt these wastes the current environmental standards. In the case of solid wastes, the NBR 10004: 2004 of the Brazilian Association of Technical Standards (ABNT) classifies them into class I waste (hazardous) and class II (not dangerous), which determines which wastes may or may not be discarded in the environment without causing environmental impact. This study presents a novel alternative for treating drill cuttings, where this waste was classified as class I (Abreu & Souza, 2005), mainly by removing the n-paraffin present in it, since this arises when using drilling fluids base oil. Using microemulsion systems promotes the removal of this contaminant drill cuttings samples from wells located in Alto do Rodrigues - RN. Initially, we determined the concentration of paraffin using infrared method in samples were extracted with ultrasound, we obtained a paraffin concentration in the range from 36.59 to 43.52 g of paraffin per kilogram of cuttings. Used two microemulsion systems containing two nonionic surfactants from different classes, one is an alcohol ethoxylated (UNTL-90) and the other an nonylphenol ethoxylated (RNX 110). The results indicated that the system UNTL-90 surfactant has better efficiency than the system with RNX 110. The study of the influence of contact time at the extraction showed that for times greater than 25 minutes has a tendency to increase the percentage extraction with increasing contact time. It was also observed that the extraction is fast because at 1 minute contact has 22.7% extraction. The reuse of the microemulsion system without removing the paraffin extracted in previous steps, showed reduction of 29.32 in percentage of extraction by comparing the first and third extraction, but by comparing the first and second extractions reduction is 8.5 in percentage extraction, so the systems reuse optimization can be an option for economically viable removing paraffin from cuttings. The extraction with shaking is more effective in the treatment of cuttings, reaching the extraction percentage of 87.04%, that is, obtaining a drill cuttings with 0.551% paraffin. Using the percentage of paraffin employed in non-aqueous drilling fluids and fluid maximum limit on cuttings for disposal established by the Environmental Protection Agency of the United States (US EPA), one arrives at the conclusion that the level of paraffin on gravel cannot exceed 3.93%. Conclude that the amount of paraffin in the treated cuttings with the microemulsion system with shaking is below the established by US EPA, showing that the system used was efficient in removing the paraffin from the drill cuttings.

Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Preceptoria em profissionais de saúde: viabilizando meios para uma formação pedagógica em hospitais públicos em Natal-RN

This study aimed to construct and carry out a distance course of pedagogical training for health professional performing preceptorship functions in public health institutions. The preceptorship in health is a pedagogical practice that occurs in workplace, led by assistance professionals with teaching position or not, where the vast majority of these acts intuitively, reproducing their own training, confusing transmitting information with education. These preceptors often do not dominate the pedagogical knowledge, necessary for the organization of training activities, such as the various teaching-learning processes and the different assessment types. Student supervision is essential in the training process of students in the health field, and on the occasion of supervised internships that the teaching-learning process is based on practical experience with participation in real life situations and professional work. It was realized an exploratory study, descriptive with qualitative approach, with the development of tutoring teaching course in health as final product. Applied semi structured research instrument from may to july 2014. It were evaluated 162 health professionals who perform the preceptorship, which made it possible define the preceptor's profile and identify the educational requirements related to the educational process, which justified the construction of the program content and the professionals’ perception analysis about preceptorship through identification of three categories: clinic knowledge valuation; valuation of professional orientation and valuation of professional future. The course was available on distance mode through Moodle platform with forty hours of work load from October to November 2014. With the aim of capacitate the health professionals to development of necessary abilities and skills to tutoring performance through thoughts about tutoring concepts, professional training within the curricular guidelines and SUS precepts, the role of health professionals as educators, application of active teaching methodologies, and evaluation methods. The applications were done online through the provided link; 300 vacancies offered, 243 professionals applied, chosen 134 that works on tutoring, where 49 represented professionals that works on the location of the study. The course lasted 45 days, and counted with tutors responsible to interact and evaluate the students. 28 professionals joined the course, 12 concluded. Opportunities were identified to stimulate the involvement, however the professionals’ satisfaction shows that, make an investment on tutors education, starting from the Permanent Education precepts, will provide a bigger appropriation of the knowledge to the education and therefore the awareness of their role as an educator on work ambit, proportioning essential tools to tutors act while enabler of integration between theory and practice and result better teaching-learning process.