Produção e estudo de multicamadas magnéticas em substrato flexível

Magnetic multilayers are the support for the production of spintronic devices, representing great possibilities for miniaturized electronics industry. having the control to produce devices as well as their physical properties from simple multilayer films to highly complex at the atomic scale is a fundamental need for progress in this area, in recent years has highlighted the production of organic and flexible spintronic devices. Because of this trend, the objective of this work was to produce magnetic multilayers deposited on flexible substrate using magnetron sputtering dc technique. Three sets of samples were prepared. The first set composed of the trilayer type CoFe=Cu(t)=CoFe with different thickness of the metallic spacer. The second set consists of two multilayer subgroups, CoFe=Cu in the presence of IrMn layer as a buffer and the next multilayer as cap layer. The third set consisting of non-magnetostrictive multilayer permalloy (Py=Ta and Py=Ag) on flexible substrate and glass. The magnetic properties, were investigated by magnetometry measurements, ferromagnetic resonance and magnetoimpedance (MI), measurements were carried out at room temperature with the magnetic field always applied on the sample plane. For structural analysis, the diffraction X-ray was used. The results of the trilayer showed a high uniaxial anisotropy field for the sample with a spacer of 4.2 nm. For the multilayer in the presence of IrMn layer as the buffer, the study of static and dynamic magnetic properties showed isotropic behavior. For the multilayer in the presence of IrMn layer as a cap, the results of static magnetic properties of the magnetic behavior exhibited a spin valve structure type. However there was a disagreement with results of ferromagnetic resonance measurements, which was justified by the contribution of the unstable and stable grain to the rotatable anisotropy and Exchange bias in ferromagneticantiferromagnetic interface. The third serie of samples showed similar results behavior for the MI Ag multilayers spacer in both substrates. There are also significant MI changes with the Ta spacer, possible associated with the compressive stress on the flexible substrate sample.

Frases magnéticas, polaritons magnéticos e modos magnetostáticos em filmes e cristais magnônicos de terras-raras

Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq

Frases magnéticas, polaritons magnéticos e modos magnetostáticos em filmes e cristais magnônicos de terras-raras

Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq

Concepções de administração e administrador em tempos de capitalismo flexível: uma abordagem crítica

A tese trata de dois construtos sócio-históricos Administração e Administrador em face do capitalismo em sua fase flexível. Considerando as mudanças do capitalismo, o texto estabelece como objeto de estudo as concepções de Administração e Administrador, para o campo administrativo, na contemporaneidade. A tese é suportada por uma pesquisa de campo cujo objetivo foi compreender criticamente as concepções do campo administrativo sobre a Administração e o Administrador, em tempos de capitalismo flexível. Epistemologicamente, a pesquisa foi conduzida a partir da perspectiva crítica frankfurtiana, fundamentada em três pares categóricos dialéticos: (i) história versus naturalização; (ii) práxis social versus sistema; e (iii) alienação versus emancipação; privilegiando o pensamento crítico vinculado à primeira geração da Escola de Frankfurt. A literatura prevalente da área de Administração foi revisada mediada pelas duas questões ontológicas que suportam a tese: O que é Administração? e O que é Administrador? para autores como Taylor, Fayol, Drucker, Ohno, Deming, Champy e Mintzberg. Metodologicamente, foi realizada uma pesquisa integralmente qualitativa, com uso de três tipos de entrevistas: (i) entrevista narrativa com história de vida; (ii) entrevista com uso de elementos-estímulo; e (iii) entrevista narrativa ficcional. Para compreensão das narrativas, foi utilizada a técnica de análise hermenêutico-dialética. Os resultados indicam o predomínio da concepção pragmática-instrumental, no tocante à Administração, pela qual ela continua a ser pensada e discursada como uma ação tecnológica e teleológica, que utiliza saberes múltiplos e aprendizagens cambiantes como meios para alcance das finalidades do contexto organizacional mutante. Com relação ao Administrador, há a emergência da concepção estética para apresentá-lo, quando vinculado às organizações. Por esta concepção, há a migração do histórico estereótipo do Administrador controlador e vigilante para a representação do Administrador como um profissional performático. O segundo resultado, que se apresenta como o mais relevante em relação ao Administrador, é o da fuga da profissão. A partir dos pares categóricos dialéticos, esta tese propõe algumas sínteses provisórias críticas: (i) história-naturalização: os sujeitos tomam como naturais a organização empresarial e suas demandas, naturalizando as recentes mudanças que, entre outras coisas, reduzem os postos gerenciais; (ii) práxis social-sistema: pela concepção pragmática-instrumental, as experiências dos Administradores são concebidas a partir do confinamento funcionalista em uma organização-sistema; (iii) emancipação-alienação: tanto a forma naturalizada com que especificam as organizações e sua Administração quanto a práxis interrompida velada em uma experiência reificada mostram-se como fenômenos intrinsecamente e subjetivamente alienantes e contraemancipatórios. Por outro lado, através do movimento de fuga da profissão, os entrevistados parecem (re)significar o silêncio fundador da alienação associada à condição de Administrador: a de pensar como capital, e não se pensar como trabalho. Finalmente, o texto propõe que as possibilidades de emancipação deste profissional residem na tomada de consciência de sua condição como integrante da classe trabalhadora, mesmo em tempos de riscos e incertezas. Assumindo-se como trabalhador, o Administrador poderá lutar pelo seu trabalho, repensando-o em novos termos, em que as dimensões pragmáticas-instrumentais que envolvem sua profissão possam ser dosadas e sempre mediadas por conteúdos substantivos e emancipatórios

Entre o mar e estrela, um lugar para se bem viver : a problemática da expansão urbana da Cidade de Baía Formosa/RN

The urban expansion problem of Baía Formosa, a southern edge city of de Rio Grande do Norte eastern coast, which has been presented in other coast Brazilian towns, specially on those with tourist activities increase. Therefore, this situation brings huge concerns to their inhabitants, to their technical /scientific community and to the governments, because of the conflicts of interest and of the growth of urban problems that this has been created. At Baía Formosa, the situation is aggravated because the city is confined, once around it, there are large private proprieties, environmental preservation area and the sea, at the eastern edge. The objectives of this study are the analyses of this city expansion process in order to obtain adequate alternatives and defining methodology to apply in other urban nucleus that are subjected to similar situations. Of course, presents social relations, environmental conditions and promoting local population insertion should be considered in order that enjoin this process and contributing to a better social balance. This case study has used bibliography research, field data, maps and soil occupation recorders and photographs of the area, besides the primary data gathering by surveys carried out with many social actors. The present analysis shows that the urban expansion observed today is featured by a recent unsustainable model, which attacks the environment and brings either farm conflicts. On the other hand, the ecological tourism can represent an alternative in order to achieve an adequate expansion form, without forgetting the several structural parameters necessary to support the sustainable activities

Atividade β-D-N-Acetilglucosaminidásica de enzimas imobilizadas extraídas da Artemia franciscana e possíveis aplicações biotecnológicas

A β-D-N-acetilglucosaminidase extracted and partially isolated from crustacean Artemia franciscana by ammonium sulfate precipitation and filtration gel chromatography Bio Gel A 1.5m. the enzyme was immobilized on ferromagnetic Dacron yielding a insoluble active derivative with 5.0 units/mg protein and 10.35% of the soluble enzyme activity. β-D-N-acetilglucosaminidase-ferromagnetic Dacron was easily removed from the reaction mixture by a magnetic field, it was reused for ten times without loss in its activity. The ferromagnetic Dacron was better activated at pH 5.0. The particles visualized at scanning electron microscope (SEM) had presented different sizes, varying between 721nm and 100µm. Infra red confirmed immobilization on support, as showed by primary amino peaks at 1640 and 1560 cm-1 . The immobilize enzyme presented Km of 2.32 ± 0.48 mM and optimum temperature of 50°C. Bought presented the same thermal stable of the soluble enzyme and larger enzymatic activity at pH 5.5. β-D-N-acetilglucosaminidase-Dacron ferromagnético showed sensible for some íons as the silver (AgNO3), with loss of activity. The β-D-N acetilglucosaminidase activity for mercury chloride (HgCl2), whom is one of the most toxic substance joined in nature, it was presented activity already diminished at 0,01mM and lost total activity at 4mM, indicating sensitivity for this type of metal. β-D-N-acetilglucosaminidase-ferromagnetic Dacron showed degradative capacity on heparan sulfate, the enzyme still demonstrated degradative capacity on heparan sulphate, suggesting a possible application to produce fractions of this glycosaminoglycan

Obtenção de nanopartículas de hexaferrita de bário pelo método pechini

In this study barium hexaferrite was (general formulae BaFe12O19) was synthesized by the Pechini method under different conditions of heat treatment. Precursors like barium carbonate and iron nitrate were used. These magnetic ceramic, with magnetoplumbite type structure, are widely used as permanent magnet because of its excellent magnetic properties, such as: high Curie temperature, good magnetic anisotropy, high coercivity and corrosion resistance. The samples were characterized by thermal analysis (DTA and TG), X- ray Diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) end Vibrating sample Magnetometer (VSM). The results confirm the expected phase, which was reinforced according to our analysis. A single phase powder at relatively high temperatures with particle sizes around 100 nm was obtained. The characteristic magnetic behavior one of the phases has been noted (probably superparamagnetic material), while another phase was identified as a ferrimagnetic material. The ferrimagnetic phase showed vortex configuration with two central and slightly inclined plateaus. In general, increase of heat treatment temperature and time, directly influenced the technological properties of the samples

Síntese e caracterização de ferrita ni-zn pelo método dos precursores poliméricos calcinada por energia de microondas

Magnetic ceramics have been widely investigated, especially with respect to intrinsic and extrinsic characteristics of these materials. Among the magnetic ceramic materials of technological interest, there are the ferrites. On the other hand, the thermal treatment of ceramic materials by microwave energy has offered various advantages such as: optimization of production processes, high heat control, low consumption of time and energy among others. In this work were synthesized powders of Ni-Zn ferrite with compositions Ni1- xZnxFe2O4 (0.25 ≤ x ≤ 0.75 mols) by the polymeric precursor route in two heat treatment conditions, conventional oven and microwave energy at 500, 650, 800 and 950°C and its structural, and morphological imaging. The materials were characterized by thermal analysis (TG/ DSC), X-ray diffraction (XRD), absorption spectroscopy in the infrared (FTIR), scanning electron microscopy (SEM), X-ray spectroscopy and energy dispersive (EDS) and vibrating sample magnetometry (VSM). The results of X-ray diffraction confirmed the formation of ferrite with spinel-type cubic structure. The extrinsic characteristics of the powders obtained by microwave calcination and influence significantly the magnetic behavior of ferrites, showing particles ferrimagnéticas characterized as soft magnetic materials (soft), is of great technological interest. The results obtained led the potential application of microwave energy for calcining powders of Ni-Zn ferrite

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Sistema de sensoriamento eletromagnético utilizado para detecção da contaminação do óleo isolante do motor no método de elevação artificial do tipo bombeio centrífugo submerso

In the artificial lift method by Electrical Submersible Pump (ESP), the energy is transmitted for the well´s deep through a flat electric handle, where it is converted into mechanical energy through an engine of sub-surface, which is connected to a centrifugal pump. This transmits energy to the fluid under the pressure form, bringing it to the surface In this method the subsurface equipment is basically divided into: pump, seal and motor. The main function of the seal is the protect the motor, avoiding the motor´s oil be contaminated by oil production and the consequent burning of it. Over time, the seal will be wearing and initiates a contamination of motor oil, causing it to lose its insulating characteristics. This work presents a design of a magnetic sensor capable of detecting contamination of insulating oil used in the artificial lift method of oil-type Electrical Submersible Pump (ESP). The objective of this sensor is to generate alarm signal just the moment when the contamination in the isolated oil is present, enabling the implementation of a predictive maintenance. The prototype was designed to work in harsh conditions to reach a depth of 2000m and temperatures up to 150°C. It was used a simulator software to defined the mechanical and electromagnetic variables. Results of field experiments were performed to validate the prototype. The final results performed in an ESP system with a 62HP motor showed a good reliability and fast response of the prototype.