Avaliação da potencialidade de incorporação de um lodo de uma indústria de produtos de limpeza como adição mineral em concretos de cimento Portland

The generation of industrial wastes has been increased more and more in recent decades, motivating studies about a correct sustainable allocation and that also represents advantages for their generators. In this context, are included two companies of cleaning products niche, located in São José do Mipibu/RN, that produces industrial sludge at a sewage treatment plant, and that is the main approach of this research. Given this, it was studied the incorporation potentiality of this sludge as a mineral addition in cement matrix for concrete production due it high capacity of wastes immobilization inside this material, which are subsequently used in the company for making precast articles. Were added different sludge concentrations (5, 10, 15 and 20%) in a common trait (1: 2: 3), and evaluated their techniques and microstructural implications via workability test in fresh state and compressive strength, full porosity and scanning electron microscopy (SEM) in the hardened state. The results demonstrated the feasibility of the process both from a technical and environmental view as economical. All concretes produced with residue showed an increase of workability given the nature of the waste that had surfactants substances capable of adsorbing tiny particles of air into the batter. However, for all concentrations were obtained lower compressive resistances than standard concrete, with a reduction of 39% for samples with 20% of sludge. This are attributed mainly to an increase of porosity in the transition zone of these material, resulting from increased formation of ettringite at the detriment to the formation of other compounds, but which still allows the use of these for the manufacture of concrete articles with non-structural nature, such as precast floor. In addition, the water absorption and void ratio increased slightly for all samples, except the concrete with 20% of waste that has a reduction for the last parameter. Given this context, the recommended maximum level is 20%, constituting a significant proportion and able to allocate sustainably all waste generated in the industry.

O slogan empresarial como construção discursiva: uma abordagem cognitivo-funcional

In this paper, we analyze corporate slogans, understanding them as a discursive construction that is, as a pairing of form and function able to unite the notions of textual type and discursive genre. In this way, we developed a qualitative and quantitative analysis, aimed specifically to analyze the formal properties (phonetic, morphological and syntactic) and functional (semantic, pragmatic and discursive) of slogans. Furthermore, we attempted at verifying and quantifying recurring aspects involved in their construction, in order to capture configurational patterns underlying their formation. The data come from slogans collected in products and / or service stores in the metropolitan area of Natal city, Rio Grande do Norte. This research is based on the Cognitive-Functional Linguistics, that conjugates the North American functionalist tradition, represented by researchers as Talmy Givón, Paul Hopper, Joan Bybee, Elizabeth Closs-Traugott, with Cognitive Linguistics, in particular, the chain linked to Construction Grammar, as postulated by Adele Goldberg, William Croft e Jan-Olla Östman, among others. The results ratified the importance of the interface between the formal and functional aspects in the analysis of linguistic uses. These results point to the idea of the slogan as the pairing of form and function on textual / discursive level, in other words, as a discursive construction, constituting as cognitive storage of a scheme / model of textual formation with a specific discursive-pragmatic function.

Produção de narrativas escritas no ensino fundamental: estudo de casos

This paper focuses on the construction of the narrative for elementary school students, searching to identify strategies they employed in the production of narrative texts representative of miniconto genre. Therefore, we take a sample forty texts produced by students of 6 and 9 years of basic education, twenty in the 6th year students (ten public school and ten private school) and twenty students in 9th grade (distributed similarly between public education and private). In general, we aim to understand the mechanisms by which producers build their narratives, as well as providing input for analysis of textual production of this genre. This research is based on Functional-Linguistic assumptions of the American side, inspired by Givón (2001), Thompson (2005), Hopper (1987), Bybee (2010), Traugott (2003), Martelotta (2008), Furtado da Cunha (2011), among others. In addition, from the theoretical framework presented by Labov (1972) about the narrative, coupled with Batoréo contribution (1998), we observed the recurring elements in the structure of narratives under study: abstract, orientation, complication, resolution, evaluation and coda. Also approached, but that in a complementary way, the notion of gender presented in Marcuschi (2002). This is a research quantitative and qualitative, with descriptive and analytical-interpretive bias. In corpus analysis, we consider the following categories: gender discourse miniconto; compositional structure of the narrative; informativeness (discursive progression, thematic coherence and narrative, topical-referential distribution); informative relevance (figure / ground). At the end of the work, our initial hypothesis of the better performance of students in 9th grade, compared to 6, and the particular context of education in relation to the public context, not confirmed, since, in the comparative study revealed that the groups have similar performance as the construction of the narrative, making use of the same strategies in its construction.

Produção de narrativas escritas no ensino fundamental: estudo de casos

This paper focuses on the construction of the narrative for elementary school students, searching to identify strategies they employed in the production of narrative texts representative of miniconto genre. Therefore, we take a sample forty texts produced by students of 6 and 9 years of basic education, twenty in the 6th year students (ten public school and ten private school) and twenty students in 9th grade (distributed similarly between public education and private). In general, we aim to understand the mechanisms by which producers build their narratives, as well as providing input for analysis of textual production of this genre. This research is based on Functional-Linguistic assumptions of the American side, inspired by Givón (2001), Thompson (2005), Hopper (1987), Bybee (2010), Traugott (2003), Martelotta (2008), Furtado da Cunha (2011), among others. In addition, from the theoretical framework presented by Labov (1972) about the narrative, coupled with Batoréo contribution (1998), we observed the recurring elements in the structure of narratives under study: abstract, orientation, complication, resolution, evaluation and coda. Also approached, but that in a complementary way, the notion of gender presented in Marcuschi (2002). This is a research quantitative and qualitative, with descriptive and analytical-interpretive bias. In corpus analysis, we consider the following categories: gender discourse miniconto; compositional structure of the narrative; informativeness (discursive progression, thematic coherence and narrative, topical-referential distribution); informative relevance (figure / ground). At the end of the work, our initial hypothesis of the better performance of students in 9th grade, compared to 6, and the particular context of education in relation to the public context, not confirmed, since, in the comparative study revealed that the groups have similar performance as the construction of the narrative, making use of the same strategies in its construction.

Implementação de conversor de polarização linear-circular para antenas de microfita usando metasuperfícies

This work aims to propose a new model of metasurface with simplified basic cell, able to convert linearly polarized signals generated by planar antenna array in circularly polarized signals, for the ISM frequency band (2.45 GHz), with good bandwidth of return loss and axial ratio. To study the behavior of the proposed structure, the metasurface is coupled to three different structures. First, initial tests are made with the metasurface coupled to a microstrip antenna in its simple configuration. Then the metasurface is coupled to an array with two elements of patch type. And later it is coupled to an optimized array, that uses a stub in its main feed, to get a better impedance matching. The structures are analyzed numerically through Ansoft HFSS™, and to validate these results, the structures are characterized experimentally. The characteristics of transmissions simulated and measures are presented. A good agreement between simulated and measured results was obtained. The structure proposed here has the advantage of meeting the desired characteristics, with a simple geometry to be built using a low-cost substrate (FR-4).

Implementação de conversor de polarização linear-circular para antenas de microfita usando metasuperfícies

This work aims to propose a new model of metasurface with simplified basic cell, able to convert linearly polarized signals generated by planar antenna array in circularly polarized signals, for the ISM frequency band (2.45 GHz), with good bandwidth of return loss and axial ratio. To study the behavior of the proposed structure, the metasurface is coupled to three different structures. First, initial tests are made with the metasurface coupled to a microstrip antenna in its simple configuration. Then the metasurface is coupled to an array with two elements of patch type. And later it is coupled to an optimized array, that uses a stub in its main feed, to get a better impedance matching. The structures are analyzed numerically through Ansoft HFSS™, and to validate these results, the structures are characterized experimentally. The characteristics of transmissions simulated and measures are presented. A good agreement between simulated and measured results was obtained. The structure proposed here has the advantage of meeting the desired characteristics, with a simple geometry to be built using a low-cost substrate (FR-4).

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Avaliação clínica e da qualidade de vida utilizando dois protocolos para recuperação miofuncional em pacientes que se submeteram à cirurgia ortognática: resultados preliminares

The objective of this randomized, blind and prospective clinical trial was to compare the pain, the edema, the mandibular movements, the masticatory efficiency and life quality, in the first 60 days after surgery using 2 different clinical protocols for myofunctional recovery, in patients who underwent orthognathic surgery. A sample of 19 patients was used and divided into 2 groups. The control group (CG) consisted of 10 patients who had postoperative rehabilitation guided by a standard protocol, conducted by the Service of Surgery and Traumatology Oral and Maxillofacial. In other hand, the experimental group (EC) totaled 9 patients who received the speech therapy rehabilitation protocol specialized, by professionals in the area. The variables pain, edema and mandibular movements were analyzed during 48h, 96h, 7 days, 14 days, 30 and 60 days post-surgery. The masticatory efficiency and the quality of life were classified with 60 days after surgery . The data were submitted an analysis of variance, Student's t-test and Fisher's independence, at the level of 5% probability. It was identified that patients of GE have benefited in the first 14 days(p<0,001), as they have had reported less pain than those in the CG. Significant statistics differences between groups for pain parameters (after 14 days) (p=0,065), edema(p=0,063), mandibular movements(p=0,068), masticatory efficiency(p=0,630) and the impact on quality of life (p=0,813) were not observed on this study. The speech therapy protocol for myofunctional recovery (EG), although it has not obtained statistical results superiors than the CG in the general context, presents itself as a viable alternative to conventional therapy assumed by many maxillofacial surgeons, allowing the surgeon to optimize time with patients in the period postoperatively.

Estratégias distribuídas para a coexistência de redes de banda larga sem fio em bandas não-licensiadas

The increasing demand for Internet data traffic in wireless broadband access networks requires both the development of efficient, novel wireless broadband access technologies and the allocation of new spectrum bands for that purpose. The introduction of a great number of small cells in cellular networks allied to the complimentary adoption of Wireless Local Area Network (WLAN) technologies in unlicensed spectrum is one of the most promising concepts to attend this demand. One alternative is the aggregation of Industrial, Science and Medical (ISM) unlicensed spectrum to licensed bands, using wireless networks defined by Institute of Electrical and Electronics Engineers (IEEE) and Third Generation Partnership Project (3GPP). While IEEE 802.11 (Wi-Fi) networks are aggregated to Long Term Evolution (LTE) small cells via LTE / WLAN Aggregation (LWA), in proposals like Unlicensed LTE (LTE-U) and LWA the LTE air interface itself is used for transmission on the unlicensed band. Wi-Fi technology is widespread and operates in the same 5 GHz ISM spectrum bands as the LTE proposals, which may bring performance decrease due to the coexistence of both technologies in the same spectrum bands. Besides, there is the need to improve Wi-Fi operation to support scenarios with a large number of neighbor Overlapping Basic Subscriber Set (OBSS) networks, with a large number of Wi-Fi nodes (i.e. dense deployments). It is long known that the overall Wi-Fi performance falls sharply with the increase of Wi-Fi nodes sharing the channel, therefore there is the need for introducing mechanisms to increase its spectral efficiency. This work is dedicated to the study of coexistence between different wireless broadband access systems operating in the same unlicensed spectrum bands, and how to solve the coexistence problems via distributed coordination mechanisms. The problem of coexistence between different networks (i.e. LTE and Wi-Fi) and the problem of coexistence between different networks of the same technology (i.e. multiple Wi-Fi OBSSs) is analyzed both qualitatively and quantitatively via system-level simulations, and the main issues to be faced are identified from these results. From that, distributed coordination mechanisms are proposed and evaluated via system-level simulations, both for the inter-technology coexistence problem and intra-technology coexistence problem. Results indicate that the proposed solutions provide significant gains when compare to the situation without distributed coordination.

Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma

SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.

Avaliação histomorfométrica do efeito do ultrasom pulsado nas falhas ósseas provocadas em fêmures de rato: estudo experimental

SILVA, J. S. P. Avaliação histomorfométrica do efeito do ultrasom pulsado nas falhas ósseas provocadas em fêmures de rato: estudo experimental . 2000. 85 f. Dissertação (Mestrado) – Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2000.