Bio-óleo e biogás da degradação termoquímica de lodo de esgoto doméstico em cilindro rotativo

The objective of this study was to produce biofuels (bio-oil and gas) from the thermal treatment of sewage sludge in rotating cylinder, aiming industrial applications. The biomass was characterized by immediate and instrumental analysis (elemental analysis, scanning electron microscopy - SEM, X-ray diffraction, infrared spectroscopy and ICP-OES). A kinetic study on non-stationary regime was done to calculate the activation energy by Thermal Gravimetric Analysis evaluating thermochemical and thermocatalytic process of sludge, the latter being in the presence of USY zeolite. As expected, the activation energy evaluated by the mathematical model "Model-free kinetics" applying techniques isoconversionais was lowest for the catalytic tests (57.9 to 108.9 kJ/mol in the range of biomass conversion of 40 to 80%). The pyrolytic plant at a laboratory scale reactor consists of a rotating cylinder whose length is 100 cm with capable of processing up to 1 kg biomass/h. In the process of pyrolysis thermochemical were studied following parameters: temperature of reaction (500 to 600 ° C), flow rate of carrier gas (50 to 200 mL/min), frequency of rotation of centrifugation for condensation of bio-oil (20 to 30 Hz) and flow of biomass (4 and 22 g/min). Products obtained during the process (pyrolytic liquid, coal and gas) were characterized by classical and instrumental analytical techniques. The maximum yield of liquid pyrolytic was approximately 10.5% obtained in the conditions of temperature of 500 °C, centrifugation speed of 20 Hz, an inert gas flow of 200 mL/min and feeding of biomass 22 g/min. The highest yield obtained for the gas phase was 23.3% for the temperature of 600 °C, flow rate of 200 mL/min inert, frequency of rotation of the column of vapor condensation 30 Hz and flow of biomass of 22 g/min. The non-oxygenated aliphatic hydrocarbons were found in greater proportion in the bio-oil (55%) followed by aliphatic oxygenated (27%). The bio-oil had the following characteristics: pH 6.81, density between 1.05 and 1.09 g/mL, viscosity between 2.5 and 3.1 cSt and highest heating value between 16.91 and 17.85 MJ/ kg. The main components in the gas phase were: H2, CO, CO2 and CH4. Hydrogen was the main constituent of the gas mixture, with a yield of about 46.2% for a temperature of 600 ° C. Among the hydrocarbons formed, methane was found in higher yield (16.6%) for the temperature 520 oC. The solid phase obtained showed a high ash content (70%) due to the abundant presence of metals in coal, in particular iron, which was also present in bio-oil with a rate of 0.068% in the test performed at a temperature of 500 oC.

Novas alternativas de remoção de enxofre do óleo diesel utilizando tensoativos e microemulsões

The diesel combustion form sulfur oxides that can be discharged into the atmosphere as particulates and primary pollutants, SO2and SO3, causing great damage to the environment and to human health. These products can be transformed into acids in the combustion chamber, causing damage to the engines. The worldwide concern with a clean and healthy environment has led to more restrictive laws and regulations regulating the emission levels of pollutants in the air, establishing sulfur levels increasingly low on fuels. The conventional methods for sulfur removal from diesel are expensive and do not produce a zero-level sulfur fuel. This work aims to develop new methods of removing sulfur from commercial diesel using surfactants and microemulsion systems. Its main purpose is to create new technologies and add economic viability to the process. First, a preliminary study using as extracting agent a Winsor I microemulsion system with dodecyl ammonium chloride (DDACl) and nonyl phenol ethoxylated (RNX95) as surfactant was performed to choose the surfactant. The RNX95 was chosen to be used as surfactant in microemulsioned systems for adsorbent surface modification and as an extracting agent in liquid-liquid extraction. Vermiculite was evaluated as adsorbent. The microemulsion systems applied for vermiculite surface modification were composed by RNX95 (surfactant), n-butanol (cosurfactant), n-hexane (oil phase), and different aqueous phases, including: distilled water (aqueous phase),20ppm CaCl2solution, and 1500ppm CaCl2solution. Batch and column adsorption tests were carried out to estimate the ability of vermiculite to adsorb sulfur from diesel. It was used in the experiments a commercial diesel fuel with 1,233ppm initial sulfur concentration. The batch experiments were performed according to a factorial design (23). Two experimental sets were accomplished: the first one applying 1:2 vermiculite to diesel ratio and the second one using 1:5 vermiculite to diesel ratio. It was evaluated the effects of temperature (25°C and 60°C), concentration of CaCl2in the aqueous phase (20ppm and 1500ppm), and vermiculite granule size (65 and 100 mesh). The experimental response was the ability of vermiculite to adsorb sulfur. The best results for both 1:5 and 1:2 ratios were obtained using 60°C, 1500ppm CaCl2solution, and 65 mesh. The best adsorption capacities for 1:5 ratio and for 1:2 ratio were 4.24 mg sulfur/g adsorbent and 2.87 mg sulfur/g adsorbent, respectively. It was verified that the most significant factor was the concentration of the CaCl2 solution. Liquid-liquid extraction experiments were performed in two and six steps using the same surfactant to diesel ratio. It was obtained 46.8% sulfur removal in two-step experiment and 73.15% in six-step one. An alternative study, for comparison purposes, was made using bentonite and diatomite asadsorbents. The batch experiments were done using microemulsion systems with the same aqueous phases evaluated in vermiculite study and also 20ppm and 1500 ppm BaCl2 solutions. For bentonite, the best adsorption capacity was 7.53mg sulfur/g adsorbent with distilled water as aqueous phase of the microemulsion system and for diatomite the best result was 17.04 mg sulfur/g adsorbent using a 20ppm CaCl2solution. The accomplishment of this study allowed us to conclude that, among the alternatives tested, the adsorption process using adsorbents modified by microemulsion systems was considered the best process for sulfur removal from diesel fuel. The optimization and scale upof the process constitutes a viable alternative to achieve the needs of the market

Linguagem matemática: uma proposta de ensino e avaliação da compreensão leitora dos objetos da matemática

This paper discusses aspects related to the mathematical language and its understanding, in particular, by students of final years of elementary school. Accordingly, we aimed to develop a proposal for teaching, substantiated by mathematical modeling activities and reading, which takes advantage of the student of elementary school a better understanding of mathematical language for the content of proportion. We also aim to build / propose parameters for the assessment of reading proficiency of the language of the student in analyzing and modeling process, its ability to develop/improve/enhance this proficiency. For this purpose, we develop a qualitative research, with procedures for an action research whose analysis of the data is configured as Content Analysis. We refer to epistemological and didactic, in the studies: Piaget (1975, 1990), Vygotsky (1991, 2001), Bakhtin (2006), Freire (1974, 1994), Bicudo and Garnica (2006), Smole and Diniz (2001), Barbosa (2001), Burak (1992), Biembengut (2004), Bassanezi (2002), Carrasco (2006), Becker (2010), Zuin and Reyes (2010), among others. We understand that to acquire new knowledge one must learn to read and reading to learn it, this process is essential for the development of reading proficiency of a person. Modeling, in turn, is a process which enables contact with different forms of reading providing elements favorable to the development here mentioned. The evaluation parameters we use to analyze the level of reading proficiency of mathematical language proved to be effective and therefore a valuable tool that allows the teacher an efficient evaluation and whose results can guide you better in the planning and execution of their practice

O impacto das tarefas de aprendizagem mediadas pela lousa digital interativa na motivação situacional de aprendizes de inglês

Some authors have suggested that learning tasks conducted in L2 classes can motivate learners in different ways. Similarly, Interactive Whiteboards (IWB) have already been linked as drivers to engagement and enthusiasm in L2 classes, which may cause some impact on affective variables that influence learning (e.g. motivation). This crosssectional mixed-methods study aims to understand how situational motivation caused by learning tasks mediated by the IWB impact participants. We seek to answer the following research questions: (1) How does motivation as a personality trait of the learner relate to his/her additional language learning performance?, (2) How does the type of learning task mediated by the IWB impact the learner s motivation?, (3) How does motivation vary along the learning task mediated by the IWB? and (4) What is the relation between the learning task motivation and the learners perception about the task mediated by the IWB? Data collection lasted four months with 29 learners from a private language school. The instruments used were the following: (a) an initial questionnaire (adapted from the Attitudes/Motivation Test Battery by GARDNER, 2004), (b) situation-specific on-line scales to assess learners motivation in three moments: before, during and after the task, and analyze how motivation varies along the task; (c) class observations and field notes resulting from these observations, (d) participants end-of-course grades to understand the connection between academic success and their motivational profiles and (e) a final questionnaire with the qualitative purpose to know learners perceptions about the tasks mediated by the IWB. Our theoretical framework is based on Task-Based Learning and cognitive aspects present in tasks (WILLIS, 1996; SKEHAN, 1996), theories on motivation and second language learning (GARDNER, 2001; DÖRNYEI e OTTÓ, 1998; DÖRNYEI, 2000; 2002) and conceptions about L2 learning mediated by technology (GIBSON, 2001; OLIVEIRA, 2001; MILLER et al, 2005). Our results do not point out to a significative correlation between learners end-of-course grades and their motivational profiles. However, they indicate that there is some variability in situational motivation along the tasks, even among learning tasks from the same type. Furthermore, they show that learners report different perceptions for each learning task and that the impact of the IWB on participants did not have a large proportion

Efeito Peltier em estruturas semicondutoras quasiperiódicas

There is nowadays a growing demand for located cooling and stabilization in optical and electronic devices, haul of portable systems of cooling that they allow a larger independence in several activities. The modules of thermoelectrical cooling are bombs of heat that use efect Peltier, that consists of the production of a temperature gradient when an electric current is applied to a thermoelectrical pair formed by two diferent drivers. That efect is part of a class of thermoelectrical efcts that it is typical of junctions among electric drivers. The modules are manufactured with semiconductors. The used is the bismuth telluride Bi2Te3, arranged in a periodic sequence. In this sense the idea appeared of doing an analysis of a system that obeys the sequence of Fibonacci. The sequence of Fibonacci has connections with the golden proportion, could be found in the reproductive study of the bees, in the behavior of the light and of the atoms, as well as in the growth of plants and in the study of galaxies, among many other applications. An apparatus unidimensional was set up with the objective of investigating the thermal behavior of a module that obeys it a rule of growth of the type Fibonacci. The results demonstrate that the modules that possess periodic arrangement are more eficient

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Caracterização da resistência do algodoeiro a Ramularia areola e variabilidade molecular do patógeno

This research was conducted with the aim to study the genetic and pathogenic structure of Ramularia areola isolates collected in Brazil and to characterize the resistance response in cotton plants to ramularia spot. The genetic variability of 28 isolates of R. areola was studied using RAPD markers. The pathogenicity evaluation was realized by the inoculation of 6 isolates on cotton varieties Guazuncho-2 (Gossypium hirsutum) and VH8-4602 (Gossypium barbadense). The inheritance of disease resistance was studied using an artificially inoculated population of F2 individuals derived from the intercross of Guazuncho-2 (susceptible variety) end VH8-4602 (resistant variety), and also the parents and F1 individuals. Molecular polymorphism between the G. hisutum varieties DeltaOpal (suscetible) and CNPA CO-11612 (resistant) was estimated by 118 SSR and 24 AFLP markers. The parental genotypes Guazuncho-2 and VH8-4602 were selected for mapping, and then Recombinant Inbred Lines (RIL´s) derived from this crossing were evaluated with SSR 12 markers. The analysis of population structure of R. areola revealed that the three subpopulations were genetically simillar (Gst=0.18), and the isolates from Goiás and Minas Gerais were more similar to each other (0,92). This probability can be related to the relatively high gene flow among the three subpopulations (Nm=2.20). The isolates R. areola 9.1, from Minas Gerais State and 8.1 and 8.3 from Goiás State were the most aggressive ones to the susceptible variety Guazuncho-2. The variety VH8-4602 presented high level of resistance to ramularia spot. No differential interaction was observed between the pathogens and the analyzed varieties, and the resistance was classified as horizontal. The quantification of disease by number of necrotic lesions and number of spores in individual plants of F1 and F2 generations from the crossing between the varieties Guazuncho-2 and VH8-4602 presented continuous distribution, suggesting polygenic resistance. The resistance is probabilly recessive, since necrotic lesions and sporulation were observed on F1 plants. The molecular polymorphism between DeltaOpal e CNPA CO-11612 lineages was low (6%), then would be difficult to accomplish molecular mapping of disease resistance using this intercross. With the genotyping of the RIL s it was verified that 25% of the markers segregated in the proportions proposed by Mendel s Law and 75% of the studied markers presented segregation distortion in favor to the parental G. hirsutum. Both the low genetic variability of the pathogen and the number of resistance genes suggest that durable genetic resitance may be achieved

Desenvolvimento de sistemas farmacêuticos emulsionados para veiculação gênica

Broadly speaking, the concept of gene therapy involves the transfer of a genetic material into a cell, tissue, or organ in order to cure a disease or at least improve the clinical status of a patient. Making it simple, gene therapy consists in the insertion of functional genes into cells containing defective genes by substituting, complementing or inhibiting them. The achievement of a foreigner DNA expression into a population of cells requires its transfer to the target. Therefore, it is a key issue to create systems able to transfer and protect the DNA until it reaches the target, the vectors. The disadvantages related to the use of viral vectors have encouraged efforts to develop emulsions as non-viral vectors. In fact, they are easily produced, present controllable stability and enable transfection. The aim of this work was to develop an emulsion for gene therapy and evaluate its ability to compact nucleic acids by the development of a complex with the plasmid pIRES2-EGFP. The first step was to determine the Hydrophilic Lipophilic Balance (HLB) of the Captex® 355 (oily internal phase of the emulsion) through long and short term stability assays. Based on the results, emulsions composed of Captex® 355, Tween 20® and Span 60® with 10.7 HLB were produced by three different methods: phase inversion, spontaneous emulsification and sonication. The results showed that the lowest diameter and best stability of the emulsions were achieved by the sonication method. The cationic emulsions were made by adding DOTAP to the basic emulsion. Its association with pIRES2-EGFP was evaluated by electrophoresis. Several rates of emulsion and DNA were evaluated and the results showed that 100% of the complex was formed when the rate DOTAP/DNA(nmol/µg) was 130. In conclusion, the overall results show the ability of the proposed emulsion to compact pIRES2-EGFP, which is a requirement to a successful transfection. Therefore, such formulation may be considered a promising candidate for gene therapy

Avaliação microscópica dos fragmentos ósseos obtidos por diferentes métodos de osteotomia e de irrigação em aloenxertos irradiados e congelados de coelho

Oral and facial bone defects can undertake appearance, psychosocial well-being and stomathognatic function of its patients. Over the yerars several strategies for bone defect regeneration have arised to treat these pathologies, among them the use of frozen and irradiated bone allograft. Manipulation of bone grafts it s not determined yet, and several osteotomy alternatives can be observed. The present work evaluated with a microscope the bone fragments obtained from different osteotomy methods and irrigation on rings and blocks allografts irradiated and frozen at 80° negative in a rabbit model. The study is experimental in vitro and it sample was an adult male New Zealand rabbit. The animal was sacrificed to obtain long bones, that were submitted to freezing at 80º negative and irradiated with Cobalt- 60. Then the long bones were sectioned into 24 bone pieces, divided into 4 groups: G1 (n=06) osteotomy was performed with bur No. 6 forming rings with 5 mm thickness with high-speed handpiece with manual irrigation; G2 (n=06) osteotomy was performed with bur No. 6 forming rings with 5 mm thick with surgical motor with a manual irrigation rotation 1500 rpm; GA (n=06), osteotomy with trephine using manual irrigation with saline; and GB (n=06), osteotomy with trephine using saline from peristaltic pumps of surgical motor. Five bone pieces of each group were prepared for analysis on light microscopy (LM) and one on electronic scan electronic microscopy (SEM). On the SEM analysis edges surface, presence of microcracks and Smear Layer were evaluated. Analyzing osteotomy technics on SEM was observed: increased presence of microcracks cutting with high speed; increased presence of areas covered by Smear Layer when cutting with motor implant. The irrigation analysis with SEM was observed: that the presence of microcracks does not depend on the type of irrigation; on manual irrigation, there was greater discrepancy between the cutting lines. The descriptive analysis of the osteotomy and irrigation process on LM showed: histological analysis showing the bony margins with clear tissue changed layer, composed of blackened tissue of charred appearance near to the cortical bone; on the edges of the bony part, bone fragments that were displaced during the bone cut and bone irregularities were observed. After analysis of results we can conclude: that there was greater regularity of the bone cut using high-speed handpiece than using motor implant; the cut with trephine using saline irrigated from peristaltic pumps of surgical motor showed greater homogeneity when compared with manual irrigation; charred tissue was found in all obtained bone samples, whit no significant statistically difference on the proportion of carbonization of the two analysed technics

Prevalência e susceptibilidade antimicrobiana de Staphylococcusspp. em quadros de saúde e doença periodontal

The aim of this study was determine the prevalence and antimicrobial susceptibility of Staphylococcus spp. from patients with periodontal disease and periodontally healthy, correlate them with factors to host, local environment and traits of the diseases. To this, thirty adults from 19 to 55 years old were selected. They had not periodontal treatment and no antibiotic or antimicrobial was administered during three previous months. From these individuals, sites periodontally healthy, with chronic gingivitis and/or periodontitis were analyzed. Eighteen subgingival dental biofilm samples were collected through sterile paper points being six from each tooth randomly selected, representing conditions mentioned. They were transported to Oral Microbiology laboratory, plated onto Mannitol Salt Agar (MSA) and incubated at 370C in air for 48 h. Staphylococcus spp. were identified by colonial morphology, Gram stain, catalase reaction, susceptibility to bacitracin and coagulase activity. After identification, strains were submitted to the antibiotic susceptibility test with 12 antimicrobials, based on Kirby-Bauer technique. To establish the relation between coagulase-negative Staphylococcus (CSN) presence and their infection levels and host factors, local environment and traits of diseases were used Chi-square, Mann-Whitney and Kruskal-Wallis tests to a confidence level of 95%. 86,7% subjects harbored CSN in 11,7% periodontal sites. These prevalence were 12,1% in healthy sites, 11,7% in chronic gingivitis, 13,5% in slight chronic periodontitis, 6,75% in moderate chronic periodontitis and in sites with advance chronic periodontitis was not isolated CSN, without difference among them (p = 0,672). There was no significant difference to presence and infection levels of CSN as related to host factors, local environm ent and traits of the diseases. Amongst the 74 samples of CSN isolated, the biggest resistance was observed to penicillin (55,4%), erythromycin (32,4%), tetracycline (12,16%) and clindamycin (9,4%). 5,3% of the isolates were resistant to oxacilin and methicillin. No resistance was observed to ciprofloxacin, rifampicin and vancomycin. It was concluded that staphylococci are found in low numbers in healthy or sick periodontal sites in a similar ratio. However, a trend was observed to a reduction in staphylococci occurrence toward more advanced stages of the disease. This low prevalence was not related to any variables analyzed. Susceptibility profile to antibiotics demonstrates a raised resistance to penicillin and a low one to methicillin. To erythromycin, tetracycline and clindamycin was observed a significant resistance

Impacto do Programa de Saúde da Família sobre indicadores de saúde bucal na população de Natal -RN

The aim of this study was to assess the impact of the Family Health Program (FHP) on a number of oral health indicators in the population of Natal, Brazil. The study is characterized as a quasi-random community intervention trial. The intervention is represented by the implementation of an Oral Health Team (OHT) in the FHP prior to the study. A total of 15 sectors covered by the FHP with OHT were randomly drawn and paired with another 15 sectors, based on socioeconomic criteria, not covered by the teams. A few sectors were lost over the course of the study, resulting in a final number of 22 sectors, 11 covered and 11 not covered. We divided the non-covered areas into two conditions, one in which we considered areas that had some type of assistance program such as the Community Agents Program (CAP), FHP without OHT, BHU (Basic Health Unit) or no assistance, and the other, in which we considered areas that had only BHU or no assistance. Community Health Agents (CHAs) and Dental Office Assistants (DOAs) applied a questionnaire-interview to the most qualified individual of the household and the data obtained per household were transformed into the individual data of 7186 persons. The results show no statistical difference between the oral health outcomes analyzed in the areas covered by OHT in the FHP and in non-covered areas that have some type of assistance program, with a number of indicators showing better conditions in the non-covered areas. When we considered the association between covered and non-covered areas under the second condition, we found a statistical difference in the coverage indicators. Better conditions were found in covered areas for indicators such as I have not been to the dentist in the last year with p < 0.001 and OR of 1.64 and I had no access to dental care with p < 0.001 and OR of 2.22. However, the results show no impact of FHP with OHT on preventive action indicators under both non-covered conditions. This can be clearly seen when we analyze the toothache variable, which showed no significant difference between covered and non-covered areas. This variable is one of the most sensitive when assessing oral health programs, with p of 0.430 under condition 1 and p of 0.038 under condition 2, with CI = 0.70-0.90. In the analysis of health indicators in children where the proportion of deaths in children under age 1, the rate of hospitalization for ARI (Acute Respiratory Infections) in those under age 5 and the proportion of individuals born underweight were considered, a better condition was found in all the outcomes for areas with FHP. Therefore, we can conclude that oral health in the FHP has little effect on oral health indicators, even though the strategy improves the general health conditions of the population, as, for example child health

Exprassão imuno-histoquímica dos fatores de reabsorção óssea em lesões centrais e periféricas de células gigantes

The Giant Cell Lesions, both the Central Giant Cells Lesions (CGCL) as the Peripheral Giant Cells Lesions (PGCL), correspond to a group of oral lesions that are histologically similar entities; however they show a variable clinical behaviour. The purpose of this study was to compare the immunohistochemical expression of bone resorption factors RANK (Receptor Activator of Nuclear Factor kappa B), RANKL (Receptor Activator of Nuclear Factor kappa B Ligand) and OPG (Osteoprotegerin) between CGCL and PGCL. Additionally, these bone resorption factors were examined in terms of aggressiveness of these lesions. The sample consisted of 61 cases, 30 cases of PGCL and 31 CGCL (16 non-aggressive and 15 aggressive). The analysis was performed by quantification of mononuclear cells (MO) and giant multinucleated cells (CG) immunopositive to anti-RANK, anti-RANKL and anti-OPG antibodies in 10 fields. Moreover, according to the proportion between the amount of cells positive for RANKL and OPG, the cases were categorized into: RANKL>OPG, OPG>RANKL e RANKL=OPG. CGCL showed a higher amount of MO (p=0.002) and total cells (p=0.003) both positives to RANKL compared with the PGCL. Additionally, the CGCL revealed a significant association with the ratio of RANKL>OPG (p=0.001). Analysis of the bone resorption factors revealed no significant differences between aggressive and non-aggressive CGCL (p>0.05). It was observed a positive correlation between the markers themselves, and a negative correlation between lesion size and quantity of OPG positive MO cells (p=0,004) and total cells (p=0,009). Through these results, we suggest that the greatest CGCL resorptive potential compared to the PGCL, may have occurred to the high expression of RANKL. Furthermore differences in the biological behavior of aggressive and non-aggressive CGCL appear to be related to the expression of these bone resorption factors

Estudo da imunoexpressão de RANKL e OPG, do índice angiogênico (CD34) e da presença de miofibroblastos (α-SMA) em ceratocistos odontogênicos isolados e associados à síndrome de Gorlin

The odontogenic keratocysts are distinguished from other odontogenic cystic lesions by their potentially aggressive clinical behavior and association, in some cases, with Gorlin syndrome. Studies have suggested that syndrome keratocysts, in comparison with sporadic lesions, have higher growth and infiltration capacity and higher recurrence tendency. The aim of this study was to analyze, by means of immunohistochemistry, the expressions of receptor activator of nuclear factor κB ligand (RANKL) and osteoprotegerin (OPG), the angiogenic index (CD34) and the presence of myofibroblasts (α-SMA) in primary and recurrent sporadic keratocysts and in keratocysts associated with Gorlin syndrome. The sample was composed by 30 sporadic keratocysts (22 primary and 8 recurrent) and 22 syndrome keratocysts. In the epithelium and in the fibrous capsule of the lesions, the immunoexpression of RANKL and OPG was evaluated by determination of the percentage of positive cells, according to the following scores: 0 (less than 10% of positive cells), 1 (11% - 50% of positive cells), 2 (51% - 75% of positive cells) and 3 (more than 76% of positive cells). In addition, cases were classified according to the RANKL score/ OPG score ratio, as follows: RANKL > OPG, RANKL < OPG, and RANKL = OPG. The angiogenic index was analyzed by counting the microvessels immunoreactive to anti-CD34 antibody in 5 fields (200). The analysis of myofibroblasts was performed by counting the cells immunoreactive to anti-α-SMA antibody in 10 fields (400). The analysis of the expressions of RANKL and OPG in the epithelial lining and in the fibrous capsule did not reveal significant differences between groups (p > 0.05). Regarding the RANKL/ OPG ratio in the epithelial lining, most sporadic primary (54.5%) and syndrome lesions (59.1%) showed RANKL < OPG ratio and RANKL = OPG ratio, respectively (p > 0.05). With respect to the RANKL/ OPG ratio in the fibrous capsule, the majority of sporadic primary (81.8%) and sporadic recurrent lesions (75.0%) and most syndrome lesions (45.5%) showed RANKL = OPG ratio (p > 0.05). The mean number of microvessels was 69.2 in sporadic primary lesions, 67.6 in recurrent lesions, and 71.6 in syndrome lesions, with no significant differences between groups (p > 0.05). The mean number of myofibroblasts was 34.4 in sporadic primary lesions, 29.3 in recurrent lesions, and 33.7 in syndrome lesions, with no significant differences between groups (p > 0.05). In conclusion, the results of the present study suggest that the differences in the biological behavior between sporadic keratocysts and keratocysts associated with Gorlin syndrome may not be related to the expressions of RANKL and OPG, the RANKL/ OPG ratio, the angiogenic index or the number of myofibroblasts in these lesions

Avaliação de pastagens tropicais em sistemas de produção de ovinos de corte no nordeste brasileiro

He aim of this study was to evaluate the structural characters, herbage accumulation, nutritive value and performance of sheep in different tropical pastures. The treatments were two cultivars and two of the genera Panicum Brachiaria pastures under intermittent stocking and variable stocking rate, in the rainy season. We evaluated the masses and the components of herbage pre grazing in two layers, and after grazing. Chemical analyzes were made of the stems and leaf blades pre grazing in two layers. We used 48 male sheep and whole for the assessment of individual weight gain and area, and anestrous females to adjust the stocking rate. In the cv. Massai showed the highest herbage mass, leaf blades and dead material, and the largest volume density and leaf blade: stem pre grazing. There was no difference among cultivars for the percentage of leaf blade (PLB) in both strata, but the higher the PLB was higher than the bottom. The highest percentage of dead material (PDM) was observed in cvs. Massai and Marandu in the two strata. In cvs. Massai and Piatã were observed lower levels of crude protein in stem and leaf. In stratum 0-25 cm lower nutritional value was observed in the stem in the leaf blades did not grant the nutritional value among the strata. Herbage mass, leaf blade, PLB and proportion of stem in the residue of the Massai pastures were higher than cv. Aruana. There was no difference for efficiencies in harvest leaf and stem between the cultivars. The cv. Massai got the higher accumulation of leaf per cycle per day. Animals kept in grass swards Aruana had the highest average daily gain. The higher stocking rates and earnings per area were observed in grass swards and Marandu Massai. The cultivars are suitable for sheep meat production in the rainy season

Fatores de influência na produção de leite bovino sobre os níveis da contagem bacteriana total

The objective of this study was to evaluate the influence of milking procedures on the levels of total bacterial count (TBC) in bovine milk. In the first study the influences of procedures for hygienic milking, cleaning of milking equipment and milk cooling tanks on the TBC levels were evaluated. Four bulk samples of milk were collected from each tank in eight properties for TBC analysis, employing the flow cytometry method. A questionnaire was applied in each property to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology for analysis of longitudinal data was considered, focusing on random effects models. The results showed that the handling procedures for milking and the cleanliness of the cooling tank contributed to a further reduction in the levels of TBC raw milk cooling tanks. The second study aimed to describe the percentage of the properties that comply with the Normative Instruction Nº 51 (Brazil s IN 51) with regard to total bacterial count (TBC) in bovine milk. The study was conducted from January 2010 to July 2011. Milk samples were collected from the eight properties selected for TBC analysis by the flow cytometry method. Again, on each property a questionnaire was applied to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology of marginal models based on Generalized Estimate Equations (GEEs) was followed in the statistical analysis. The results showed that the handling procedures of the milking and the cleanliness of the cooling tanks contributed to a considerable percentage of the properties that reached the limits of TBC established by IN 51