152 resultados para materiais de construção e tipo de cobertura


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Relevância:

30.00% 30.00%

Publicador:

Resumo:

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The companies are part of an important segment of the society, besides, it exercises a significant contribution, being also responsible for helping in the improvement of the quality of life of the population. Like this being, to present research looked for to investigate the perception that the entrepreneurs of the building site of Aracaju/SE have concerning the theme Business Social Responsibility (RSE). besides the perceptions, it was part also of the research, to know the entrepreneur's of the building site social construction and the possible practices of Social Responsibility. The research grew in two different moments. The first looked for the theoretical embasamento, trying to study the economical sociology, understanding the effects provoked by the economy, understanding to you reason them that you/they took to the appearance of the perceptions that you/they permeate the historicity among the market, the nascedouro of the associations as company and his/her dynamics in the society. It was also researched, the concept of social responsibility in national and local extent, as well as, the contextualização of the state of Sergipe, detaching the municipal district of Aracaju, and describing how it happened his/her development starting from what is considered urbanization. In the second moment, the accomplishment of interviews in five companies, allowed to notice the entrepreneurs' perception concerning business social responsibility, as well as, actions of different characteristics in four of the samples. In these actions, they are patronage in cultural events, donations of projects for charity institutions, the concern with the preservation of the environment in the use of work materials ecologically correct, preventive health and employees' training. Concluding the research, I introduce the conclusions which it allowed to arrive me, and I point some suggestions for future researches that enlarge the reflection on this theme

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A pretensão deste trabalho foi o de analisar o discurso da revista semanal Veja sobre o governo de Hugo Chávez Frías, atual presidente da República Bolivariana da Venezuela. Através da leitura das reportagens, procuramos apresentar o comportamento da revista em relação ao se governo e a forma que sua política é classificada, representada. Reunimos edições da revista, entre 1998 a 2002, início do seu governo - eleito em dezembro de 1998, toma posse no início de 1999, período da tentativa de golpe (frustrada) em abril de 2002. O trabalho procura mostrar como as matérias não são isentas e que há um claro posicionamento ideológico da revista, que se insere no conjunto mais geral da mídia conservadora e anti-Chávez. O presidente, eleito e reeleito democraticamente, aparece sempre nas diversas reportagens da revista caracterizado como golpista, ditador, populista, fanfarrão. O nosso objetivo é o de revelar como Veja criou uma imagem negativa do presidente da Venezuela, coerente com os princípios neoliberais defendidos pela revista. A Venezuela com Hugo Chávez, com a chamada Revolução Bolivariana , realiza uma experiência singular de governo num país de larga tradição antidemocrática e afirma caminhar na contracorrente do pensamento hegemônico neoliberal. Em contrapartida, a revista Veja se apresenta com um representante da burguesia financeira e importante sujeito na construção e continuidade do neoliberalismo

Relevância:

30.00% 30.00%

Publicador:

Resumo:

One of the agreements assumed at the conference of the United Nations for the Environments and Development which took place in Rio de Janeiro in 1992; through Global Agenda 21, was that the signatory countries would create a national Politics of sustainable development, by means of their national Agenda 21. Demonstrating the relevance of municipal districts and the local communities, during the definitions of new development standards compromised to the transformation of the society, socia1ly and environmentally well-balanced world, it was also agreed on that places under the responsibilities of the municipal districts would promote their own local Agenda 21. We need to point out though that the government has the prerogative and the responsibly of facilitating the population participation process in the construction of national and local Agenda. This made it possible again, to plan the scheming process directly towards the insertion of population participation at the different levels, involving the entire local sectors while establishing a new local partnership through the local municipal government. Thus, we decide to verify the participation of the population in the construction of their local Agenda 21, choosing for the study case Parnamirim municipality from RN. The question which originated the objectives and analysis was formulated on the following terms: Up to which stage was the process of population participation effective in the elaboration of Parnamirims's local Agenda 21? Based on this uneasiness, it was defined as the general objective, the verification of population participation process during the elaboration of Parnamirims's local Agenda 21, aiming at its effectiveness as well as specific objectives; to identify the population representivity, the construction of the local AG 21 in order to identify on which level is the participation based, to verify the strategies used in order to promote the process participation, to identify the motives guiding those involved in the construction of the local Agenda 21. This case study at Parnamirim municipal district demonstrated that there was effective population participation as far as the local Agenda 21 is concerned

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Cette recherche est ancrée dans les racines de la pédagogie de Célestin Freinet, un des plus importants éducateurs du XXème siècle, car ses propositions naissaient de la réalité de l élève lequel était, de ce fait, valorisé. Au début de ses recherches, Freinet s est rendu compte que pour pouvoir édifier une école qui, effectivement, atteigne les classes populaires, il devrait réaliser des changements dans le milieu scolaire. Notre travail le principe de coopération dans les actions développées par le professeur et ses élèves dans le quotidien de la salle de classe. Les décisions pour la réalisation de ce travail ont exigé, de notre part, une profonde et globale réflexion vis à vis des pas qui devraient être entamés, considérant que notre intention n était pas de faire une simple intervention dans le système scolaire avec une programmation pré-établie, sans instruments crées à priori pour le développement d actions dans le contexte scolaire. Comme questions principales nous pouvons souligner: Comment la coopération contribue pour le vécu des élèves? De quelle manière ce principe se réalise dans le quotidien de la salle de classe? Le principe coopératif, pourrait-il agir comme une alternative qui favorise la dynamique de la salle de classe et des relations entre les élèves? Le principe de la coopération exige la création d une ambiance en salle de classe dans laquelle il existe des éléments médiateurs dans la relation professeur-élève. Ainsi, l organisation de la salle a un caractère important; il faut considérer la participation des élèves dans la construction de ses connaissances. Pour cela, il est nécéssaire créer des structures qui doivent être complétées à partir de l activité des propres élèves. Dans la ligne de cette pensée nous avons, donc, comme objectifs spécifiques: 1) Investiguer, dans l action pédagogique du professeur, l utilisation de stratégies pour la consolidation du principe coopératif pour la salle de classe; 2) Faire une réflexion à propos de l organisation du travail coopératif développé par le professeur en observant comment celui-ci est réalisé en salle de classe; 3) Établir un répertoire des vécus de coopération construits en salle de classe par les élèves et le professeur. Ainsi, pour développer une interaction avec les sujets de la recherche [professeurs et élèves] des études ont été développés ancrés sur les principes de la recherche qualitative de type ethnographique pour considérer ce dernier un référentiel méthodologique plus indiqué à l utilisation des téchniques d observation, interviews et analyse de documents, car ces téchniques sont, traditionnellement, associées à l ethnographie. Cette recherche a pour but comprendre la vision de ce qui arrive quotidiennement dans la salle de classe observée et les multiples relations imbriquées dans le processus de motivation de l apprentissage utilisant la coopération

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Ce travail que nous venons de présenter apport une systématisation sur la viabilité de la praxis de l´éducateur français Célestin Freinet (1896-1996). Il s´agit d´une étude qualificative, recherche-action, développée dans une école coopérative l´ École Freinet à Natal/RN Brésil, auprès des élèves du 5ème et 8ème séries de l´Enseignement Fondamental. Le problème central que nous a amené à cette recherche, a été le fait de vérifier les progressions dans la production scientifique et dans les pratiques des enseignants qui ont à la charge l´Éducation Infantine et les premières séries de l´Enseignement Fondamental. Tout cela en tenant compte en concevoir l´élève en tant que sujet actif de son apprentissage et coresponsable à l´organisation du travail scolaire. Toutefois, qaund-il s´agit des quatre dernières séries de l´Enseignement Fondamental (5ème au 8ème séries), les propositions progressistes sont prises comme quelque chose pratiquement impossible d´en mettre en marche. Pour attenuer la lacune théorique sur le sujet, nous avons offert un texte significatif pour les enseignants d´une façon générale, les chercheurs de l´académie et pour l´écolechamp de la recherché. Tout cela par le fait de ne pas donner de priorité à une technique ou à un principe, en particulier. Cette pédagogie est discutée autant que possible dans son contexte global et aussi sur le comment s´est manifestée dans sa práxis . Nous avons mis en relief les aspects importants pour le fonctionnement de la salle de classe, aussi que les estratégies utilisées pour la construction, communication et documentation des connaissances L´intervention nous a permis de construire l´objet par la réflexion en action, à partir des données obtenues pendant les observations, les entretiens, les enterviews, les moments d´études et de la quête des textes écrits. L´analyse a été faite à la lumière de la methodologie comprehensive (Kaufmann, 1996), entrelacée au materiau empirique et à la théorie. Cette forme d´analyse nous a permis d´obtenir la logique dans l´ensemble comme nous crayons que doit caracteriser la recherche aux Sciences Humaines et Sociales. Les considérations finales mettent l´accent d´un côté sur l´efficacité de la pédagogie Freinet, pour orienter le processus de l´enseignement apprentissage, en tous les dégres de l´enseignement et de l´autre côté nous montre la nécessité urgente de l´équipe de l´école champ de la recherche, de qualifier sa pratique à partir des références théoriques-pratiques de la pédagogie Freinet

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This dissertation aims to analyze the relevant knowledge in countryside History teachers practice in high school and understand how these teachers themselves construct school knowledge in History, from the mobilization of different knowledge that make up teaching practice. Tree teachers from State Jacumauma High School and the researcher himself worked together in order to carry out this survey. The main theoretical-methodological elements of this research are based on assumptions of a qualitative research in cooperation. This approach was used to make possible to construct knowledge between teachers and researcher considering a less oppressive relationship as well as to help a continuous school upbringing of the individuals what can make them to understand the professional practice as an aspect in which one can exercise autonomy and criticism. The empirical research procedures were oral individual interviews, reflexive sessions and cooperative observations. Individuals speeches have presented, in some moments, teachers concerns about the educational fragmented system in which there are few opportunities to dialogic interactions among educationalists making still more difficult the dialog between school and reality surrounds it. Their assertions pointed out that relevant knowledge can be identified during the daily educational work and that they find proper reasons from the aim that each knowledge exerts in relation to the construction of professional practice. Classroom connections points out to more intense interactions between teachers and students, by recognizing affection as an important tool in order to make the interactions not so authoritarian at all. Regarding the countryside teachers understanding, the school knowledge in History is produced by sharing concerns and senses assigned by the individuals who are involved in the teaching-learning process. The referential science knowledge pervade History teaching, however they take another meaning according to specific features of the school environment. The intense and complex dynamic of the educational context makes that historical knowledge acquires specific characteristics that are constantly changing. As they change, there are some marks of elaborations and re-elaborations not only the new but also the traditional

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In recent years, the Brazilian construction industry has gone by changes like currency stability, increasing competition, shortage of skilled labor and increasing quality importance required by the customer, who made the sector companies seek solutions through new management practices in order to become more efficient. A alternative to these management practices is known as Lean Construction which is derived from the Toyota System Production. Lean Construction main goals are to reduce parts of activities that do not add value, increase product value by considering customer needs, reduce variability and production cycle time, simplify process by reducing the number of parts or steps, increase the flexibility in the product execution and transparency process, focus the control on overall process, introduce continuous improvement process, maintain a balance between improvements in flows and conversions and seek to learn from practices adopted by competitors. However, the construction industry is characterized by having nomadic activity, which undertakes an unique product with high cost of production and big inertia for behavioral change, making it difficult to implement the philosophy of lean construction in companies. In this sense, the main objective of this study is to develop a methodology for implementation of the principles of Lean Construction. The method of implementing the proposed management system was designed with the aid of 5W2H tool, and the implementation process is divided into three phases. The first one aims to know in a macro way the current operation of construction, identify who is its target audience and what are the products and services offered to the Market. The second phase aims to describe what actions should be taken and which documents are needed to be created or modified; finally, the third step goal consists in how to control and monitor established processes, where through Strategic Planning the company goals would be set along with their respective targets and indicators in order to keep the system working, aiming for continuous improvement with focus on the customer. This methodology was conceived as a case study analyzing a medium size construction with more than 18 years of activity and certified for almost 10 years with ISO9001 and level A in PBQP-H. We also conclude that this implementation process can be used in any developer and / or builder

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Relevância:

30.00% 30.00%

Publicador:

Resumo:

It is a case study that reports the construction of metal truss bridge in the river Potengi in Natal, Rio Grande do Norte, between the years 1912 and 1916. From testimonials on steel bridges in Brazil and worldwide including foundations. Documentary research from procurement of projects and contracts was performed. A chronology of construction, with a description of the equipment used and its original budget with the Brazilian government. Still, we used interviews and surveys with experimental sampling / testimonies, laboratory tests. This study aims to analyze historically and technically the Bridge over the River Potengi, emphasizing primarily the construction process, the qualities and characteristics of the materials used and the technological, chemical, mineralogical and microstructural properties of cement and concrete used in its construction. Taking as conclusions that cements pozolônicos ensured a good durability to the concrete in a hundred-year period and that the solution employed with the compressed air caissons was right

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The construction industry is responsible for generating a lot of waste because of their activities. Consequently, it is noticeable the occurrence of environmental problems in terms of its disposal in inappropriate places. Faced with this problem, some studies have been conducted with the aim of developing technologies and alternatives for recycling construction and demolition waste (CDW), motivated by the scarcity of natural resources and reduction of environmental problems generated. The research aims to characterize the recycled aggregates derived from construction and demolition waste (CDW) produced in the Greater Natal-RN and analyze the performance of mortar coating produced with recycled aggregates. The study includes the chemical , physical and microstructural characterization of recycled aggregates , as well as conducting microscopic analysis and laboratory tests in the fresh state (consistency index , water retention , bulk density and content of entrained air ) and in the hardened state ( compressive strength , tensile strength in bending , water absorption by immersion and capillary , mass density and void ratio ) for mortars produced from different levels of substitution of aggregates ( 0, 20 %, 40 %, 60 %, 80 % and 100 %). The results were satisfactory, providing mortars produced with recycled aggregates, smaller mass density and dynamic modulus values as well as an increase in the rates of absorption and porosity. The tensile strength in bending and compression for TP1 (1:2:8) trait were lower for mortars produced with recycled aggregates and the best result was 20% for replacement. For the TP2 (1:8) mapping, there was an increase in resistance to traction and compression and the best result was for 100% replacement of natural aggregates by recycled. The experiments led to the conclusion that the technical and economic point of view that the mortars produced with recycled aggregates can be used in construction, only if there is an effective control in production processes of recycled aggregate and at the dosage of mortars

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The search for cultural heritage preservation should be a constant, in order to minimize the lost of historical and cultural identity of a country. As part of this cultural heritage, highlights the importance of historical buildings. For the principles of restoration are met its important to know the state of conservation and the existing materials. Given the above, this work aims to study the pathological manifestations of the mortar coating from the Grupo Escolar Augusto Severo. For this, was conducted historical survey of the building, on-site visits with visual observation, collecting samples of mortar coating and characterization through visual and laboratory analysis, XRF, XRD, TG/DTG, OM and SEM-EDS. From the observations, pathological manifestations were found as: cracks, detachment of the coating, dirt, use of inappropriate material basis of cement, efflorescence, mold and mildew and also incompatible material base of cement. It was found that the pathological manifestations were intensified due to lack of coverage in some spots and especially the abandonment of the building, that many years does not have restoration or any other type of preventive and corrective maintenance. The results of laboratory tests indicated that the mortars studied are based on lime, with calcitic nature, and siliceous aggregate, with the presence of clay in two samples. From the samples collected, two are composed of lime, sand and clay and two by lime and sand. In this regard, it is important to conduct periodic inspections and maintenance, as well as carrying out restoration with use of material compatible with the original