Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Estudo térmico dos resíduos gerados da destilação atmosférica das misturas diesel/biodiesel de dendê

The growing world demand for energy supplied by fossil fuels, a major contributor to the emission of pollutants into the atmosphere and causing environmental problems, has been encouraging governments and international organizations to reflect and encourage the use of alternative renewable sources. Among these new possibilities deserves attention biodiesel, fuel cleaner and easy to reproduce. The study of new technologies involving that source is necessary. From this context, the paper aims at analyzing the thermal stability by thermogravimetric analysis, of the waste generated from atmospheric distillation of mixtures with ratios of 5, 10, 15 and 20% palm biodiesel in diesel with and without addition of BHT antioxidant. It was synthesized biodiesel through palm oil, via homogeneous catalysis in the presence of KOH, with and without the use of BHT and subsequently added to the diesel common indoor type (S1800) from a gas station BR. The diesel was already added with 5% biodiesel, and thus the proportions used for these blends were subtracted from the existing ratio in diesel fuel, resulting in the following proportions palm oil biodiesel: 0% (B5), 5% (B10), 10 % (B15) and 15% (B20). From atmospheric distillation analysis, performed in mixtures with and without BHT were collected residue generated by each sample and performed a thermal study from the thermogravimetric analysis at a heating rate of 10 °C.min-1, nitrogen atmosphere and heating to 600 ° C. According to the specifications of Resolution No. 7/2008 for biodiesel, it was found that the material was synthesized in accordance with the specifications. For mixtures, it was noted that the samples were in accordance with the ANP Resolution No. 42/2009. Given the TG / DTG curves of the samples of waste mixtures with and without BHT antioxidant was able to observe that they showed a single stage of thermal decomposition attributed to decomposition of heavy hydrocarbons and esters and other heavier constituents of the waste sample weighed. The thermal behavior of residues from atmospheric distillation of mixtures of diesel / biodiesel is very important to understand how this affects the proper functioning of the engine. A large amount of waste can generate a high content of particulate material, coke formation and carbonaceous deposits in engine valves, compromising their performance

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação

CARDOSO, M. F. ; RAMOS, A. S. M. . Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação. Revista Espaço Acadêmico (UEM) , JCR, v. 10, p. 150-158, 2010.

Classificação bibliográfica: as diversas contribuições para o tratamento da informação

PEREIRA, Edinete do Nascimento et al. Classificação bibliográfica: as diversas contribuições para o tratamento da informação. In: SEMINÁRIO DE PESQUISA DO CCSA, 15., 2009. Anais... Natal: UFRN, 2009.

Pessoas com deficiência visual e o acesso à informação

Expõe considerações a respeito dos portadores de necessidades especiais, das pessoas com deficiência, um enfoque parcial sobre as doenças degenerativas da visão, e uma atenção especial para as pessoas com deficiência visual, objeto de estudo da pesquisa desenvolvida. Estabelece um resgate da evolução dos métodos que possibilitaram a essas pessoas registrar e decodificar informações na forma escrita até o surgimento do Sistema Braille. Destaca ainda os suportes e as formas de registro da informação no mencionado sistema, e aponta nominalmente os novos recursos decorrentes do advento das novas tecnologias.

O ambiente de pesquisas virtuais na biblioteca acadêmica: da implantação à consolidação, um longo percurso.

O ambiente da pesquisa acadêmica nas bibliotecas universitárias se apresenta em constante evolução. Nesta perspectiva, as construções de novos espaços se fazem necessários na promoção e acesso à informação, via vários tipos de suportes. Atualmente, antigos paradigmas são sobrepostos com uma velocidade luz. Neste artigo, apresenta-se a implantação, manutenção e consolidação do Setor de Pesquisas Virtuais em uma biblioteca universitária, com vistas à democratização do acesso à informação eletrônica, como também à criação de uma rede de comunicação rápida, eficaz, tendo como foco central as novas Tecnologias da Informação e Comunicação (TICs). Assim, enfoca-se a construção do espaço físico do Setor de Pesquisas Virtuais, através da criação de normas, produtos, serviços e divulgação desse novo recurso. A consolidação deste espaço encontra-se em pleno desenvolvimento, via aquisição de produtos específicos, consorciamentos junto às redes especializadas, geração de novos produtos e, principalmente, a presença direta de um profissional bibliotecário intervindo e mediando o processo da busca e do acesso às informações com segurança e confiabilidade das fontes. Consequentemente, essas ações estão trazendo benefícios à comunidade atendida.

Panorama brasileiro das bibliotecas digitais de teses e dissertações

As bibliotecas de teses e dissertações têm um papel fundamental para o desenvolvimento científico e cultural de um país. Nesse sentido, buscou-se, de modo geral, analisar o panorama brasileiro das bibliotecas digitais de teses e dissertações. Especificamente, objetivou-se caracterizar a sociedade da informação enquanto contexto das BDTD; caracterizar os vários tipos de bibliotecas surgidos a partir da inserção das novas tecnologias de informação e comunicação; identificar as diretrizes norteadoras da implantação de BDTD; e levantar as BDTD existentes no Brasil. Para tato, além de levantamento bibliográfico, realizou-se uma pesquisa nos sites de instituições de ensino superior brasileiras que já dispõe de bibliotecas digitais de teses e dissertações em funcionamento. A análise e interpretação destes dados nos permite considerar que no Brasil as BDTD encontram-se num estágio embrionário, sendo relevante pesquisar a histórica implantação e configuração desse novo modelo de biblioteca.

Mapeando fundamentos do Constructo Neuromarketing com profissionais de empresa de publicidade

This study aims to acknowledge the domain level and influence of the neuromarketing construct. This is done considering professionals at advertising agencies in Brazil. The presence of concepts related to this new approach is very little divulged, and there are little analysis performed on this area. Thus, the research is of qualitative and exploratory nature and used as primary fonts books, articles related to marketing, neuroscience, and psychology as well as secondary fonts. A profound interview was realized aiming the main advertising agencies in Brazil. The public was composed by managers responsible for planning. A content analysis was performed afterwards. The advances related to the brain science have permitted the development of technological innovation. These go primarily towards knowledge and unconscious experiences of consumers, which are responsible for the impulse of decision making and consumer behavior. These issues are related to Neuromarketing, that in turn, uses techniques such as FMRI, PET and FDOT. These scan the consumer s brain and produces imagines on the neuron s structures and functioning. This is seen while activities such as mental tasks for the visualization of brands, images or products, watching videos and commercials are performed. It is observed that the agencies are constantly in search of new technologies and are aware of the limitations of the current research instruments. On the other hand, they are not totally familiar with concepts related to neuromarketing. In relation to the neuroimage techniques it is pointed out by the research that there is full unawareness, but some agencies seem to visualize positive impacts with the use of these techniques for the evaluation of films and in ways that permit to know the consumer better. It is also seen that neuroimage is perceived as a technique amongst others, but its application is not real, there are some barriers in the market and in the agencies itself. These barriers as well as some questioning allied to the scarce knowledge of neuromarketing, make it not possible to be put into practice in the advertising market. It is also observed that even though there is greater use of neuromarketing; there would not be any meaningful changes in functioning and structuring of these agencies. The use of the neuro-image machines should be done in research institutes and centers of big companies. Results show that the level of domain of the neuromarketing construct in the Brazilian advertising agencies is only a theoretical one. Little is known of this subject and the neurological studies and absolutely nothing of neuroimage techniques

O uso do móbile marketing como estratégia de fidelização de clientes :um estudo e empresas do setor de comércio e serviços em natal-RN

This study aims to understand the effects of the mobile marketing use as a relationships tool for companies that operate locally, because of the lack of information about this new marketing tool, as well as the scarcity of studies in this area. This is an exploratory and qualitatively study, based on primary sources, raised through books, articles in the marketing area and the telecommunications industry organs as well as secondary sources. With the purpose to look into the issue, a semi-structured interview is made with the companies managers of the sectors of trade and services in Natal-RN. The advances in technology allow an important discussion focused on the marketing in the new communication technologies scenario. It appears that the mobile marketing adoption and use by local companies is already a reality and companies are awake to changes and technological innovations accessible, especially the mobile telephony as well as convergence with other media. There is, however, that the use of technologies offered by mobile marketing is still limited to the sending of text messages (SMS), despite the numerous possibilities of it use. Moreover, the results obtained with mobile marketing use show that companies can identify them, but there is no effective monitoring in quantity and financial terms. Only affect sales growth and support for progress in loyalty with customers. It shows up that the mentality of not measuring the results still in the plan of changes and technological innovations. The data allow saying that the mobile marketing is a reality, however has not yet signed as a tool for carrying out campaigns and marketing tool for loyalty of customers, despite presenting a wide range of possibilities to streamline and make more effective the marketing businesses process

Apoio governamental à inovação Tecnológica: análise da indústria farmacêutica paraense

The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers

Relações entre perfil de valores e perfil de uso da tecnologia: Um estudo com os docentes que atuam na modalidade presencial e/ou no ensino a distância

O advento das novas tecnologias e a dinamicidade das mudanças que estas provocam, impactam diretamente em vários aspectos da sociedade, dentre estes, na educação. Novas metodologias e mudanças no processo de ensino-aprendizagem tornam-se práticas cada vez mais frequentes neste campo. O elemento basilar desta nova constituição é o docente, capaz de transformar a utilização desses recursos em ferramentas que favoreçam o processo educativo. Essa readequação do comportamento exigida por essas constantes mudanças é orientada pelos valores pessoais dos sujeitos que vivenciam a situação. Os valores são idealizados como critérios que interferem diretamente nas atitudes, preferências e até mesmo no comportamento humano, influenciando no modo como o indivíduo interpreta as suas próprias atitudes e as dos outros, inclusive no âmbito profissional. Dessa forma, o objetivo geral da presente pesquisa é analisar as relações entre o perfil de uso da tecnologia e os valores dos docentes da UFRN Universidade Federal do Rio Grande do Norte, baseado na escala de valores de Schwartz. Para isso foram utilizados os tipos motivacionais que compõem a teoria de valores de Schwartz, através de questionário aplicado junto aos docentes. Trata-se de uma pesquisa de enfoque analítico quantitativo que utiliza um questionário da escala de valores desenvolvida por Schwartz et al. (2001) conhecida como PVQ (Portrait Values Questionnaire). A pesquisa foi desenvolvida a partir de uma amostra de 200 docentes entre atuantes da modalidade presencial e/ou na modalidade de ensino a distância. A estratégia de análise dos dados utilizou técnicas de estatística descritiva, análise de gráficos, análise das frequências relativas e a técnica estatística MANOVA (Análise Multivariada de Variância). Os resultados apontaram que os docentes utilizam moderadamente os recursos tecnológicos avaliados nesta pesquisa, como ferramenta de apoio pedagógico. Com relação ao perfil de valores, os docentes apresentaram prioridade entre os tipos motivacionais Autodeterminação, Benevolência e Universalismo, enquanto os menos priorizados foram os de Tradição, Realização e Poder, respectivamente. Contudo, não foram identificadas relações significativas entre o perfil de valores e o perfil de uso da tecnologia entre os docentes estudados nesta pesquisa

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed