127 resultados para Tráfico de influência, Brasil
Resumo:
The Baixa grande fault is located on the edge of the S-SW Potiguar Rift. It limits the south part of Umbuzeiro Graben and the Apodi Graben. Although a number of studies have associated the complex deformation styles in the hanging wall of the Baixa Grande Fault with geometry and displacement variations, none have applied the modern computational techniques such as geometrical and kinematic validations to address this problem. This work proposes a geometric analysis of the Baixa Fault using seismic interpretation. The interpretation was made on 3D seismic data of the Baixa Grande fault using the software OpendTect (dGB Earth Sciences). It was also used direct structural modeling, such as Analog Direct Modeling know as Folding Vectors and, 2D and 3D Direct Computational Modeling. The Folding Vectors Modeling presented great similarity with the conventional structural seismic interpretations of the Baixa Grande Fault, thus, the conventional interpretation was validated geometrically. The 2D direct computational modeling was made on some sections of the 3D data of the Baixa Grande Fault on software Move (Midland Valley Ltd) using the horizon modeling tool. The modeling confirms the influence of fault geometry on the hanging wall. The Baixa Grande Fault ramp-flat-ramp geometry generates synform on the concave segments of the fault and antiform in the convex segments. On the fault region that does not have segments angle change, the beds are dislocated without deformation, and on the listric faults occur rollover. On the direct 3D computational modeling, structural attributes were obtained as horizons on the hanging wall of the main fault, after the simulation of several levels of deformation along the fault. The occurrence of structures that indicates shortening in this modeling, also indicates that the antiforms on the Baixa Grande Fault were influenced by fault geometry
Resumo:
The physical structural modeling tool is being increasingly used in geology to provide information about the evolutionary stages (nucleation, growth) and geometry of geological structures at various scales. During the simulations of extensional tectonics, modeling provides a better understanding of fault geometry and evolution of the tectonic-stratigraphic architecture of rift basins. In this study a sandbox type apparatus was used to study the nucleation and development of basins influenced by previous structures within the basement, variably oriented as regards to the main extensional axis. Two types of experiments were conducted in order to: (i) simulate the individual (independent) development of half-grabens oriented orthogonal or oblique to the extension direction; (ii) simulate the simultaneous development of such half-grabens, orthogonal or oblique to the extension direction. In both cases the same materials (sand mixed with gypsum) were used and the same boundary conditions were maintained. The results were compared with a natural analogue represented by the Rio do Peixe Basin (one of the eocretaceous interior basins of Northeast Brazil). The obtained models allowed to observe the development of segmented border faults with listric geometry, often forming relay ramps, and the development of inner basins faults that affect only the basal strata, like the ones observed in the seismic sections of the natural analogue. The results confirm the importance of basement tectonic heritage in the geometry of rift depocenters
Resumo:
Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.
Resumo:
E utrophication in continental aquatic ecosystems and the following deterioration of water quality are some of the greatest problems to be solved in this century. Due to their own peculiarities reservoirs from semi - arid regions constitute a great challenge to water management because of their greater vulnerability to eutrophication process. I dentification of biolo gical community components that may be used as bioindicators is important to allow an early detection of adverse changes, and also to provide subsidies for management and conservation actions. The aim of the present study is to evaluate the potential of zo oplankton community as bioindicator of the trophic state of two reservoirs belonging to the Piranhas - Açu basin, RN, Brazil: Boqueirão de Parelhas and Passagem das Traíras. Monthly sampling s of both systems were carried out in both systems during the period of January to December. Measurements were performed for temperature, pH, dissolved oxygen and water electrical conductivity besides water samples collection for nutrients, suspended solids, chlorophyll - a and zooplankton analyses. T axonomic composition of zooplankton , density and biomass were analysed. Trophic state index, ABC curves , W statistic and the Calanoida: Cyclopoida ratio were also obtained. The results evidenced that Boqueirão de Parelhas reservoir was a mesotrophic sy stem, and Passagem das Traíras r eservoir was eutrophic. In both reservoirs zooplankton community had low species richness, mostly constituted by tolerant species which have wide geographical distribution, as well the dominance of the rotifers Brachionus havanaensis , B. calyciflo rus and Keratella tropica ; of the calanoid copepods Notodiaptomus cearensis and N. iheringi ; cyclopoid copepod Thermocyclops decipiens, and of the cladocerans Ceriodaphnia cornuta and Diaphanosoma spinulosum . Among the biological indices the ABC curves fo r the zooplankton community indicated a moderate dis turbance in both reservoirs, th e Calanoida: Cyclopoida ration indicated not impacted environments , e xcept during the end of the study to the reservoir Passagem das Traíras . It was concluded that the indices used are good indicators of disturbance and alteration in the community, however they are not good indicators for monitoring the trophic state of the studied reservoirs due to the simultaneous occurrence of other factors selecting species, as the c oncentration of ions and high turbidity, which are part of the reservoir characteristics of semiarid.
Resumo:
Este trabalho objetiva avaliar a influência das medidas antropométricas sobre a pressão arterial sistêmica de uma coorte de hipertensos atendidos nas Unidades de Saúde da Família (USF) no município de João Pessoa-PB durante o período de 2008 a 2011. Para verificar as diferenças de níveis pressóricos entre as medidas realizadas nas consultas referentes ao cadastro, e a ultima pressão obtida no período de acompanhamento foram utilizadas informações sobre a identificação, dados clínicos do paciente, fatores de risco e doenças concomitantes. Testes estatísticos de comparabilidade entre grupos foram empregados. Para investigar os padrões de associação dos fatores de risco das variáveis antropométricas e sociodemográficas com a hipertensão dos pacientes, foi empregado o Modelo de Regressão Logística. Foram encontradas associações significativas (p<0,005) da hipertensão com a obesidade e o sedentarismo. Com os resultados desta pesquisa pretende-se: fornecer indicadores sobre a efetividade da Estratégia Saúde da Família; avaliar a qualidade das informações antropométricas; contribuir para a definição de estratégias que garantam o melhoramento dos acompanhamentos dos hipertensos e fornecer elementos científicos de apoio para outras USF e instituições governamentais.
Resumo:
This study addresses the environmental quality in therapeutic spaces for children's rehabilitation. The assumption that space is active and interfere in interpersonal relationships, highlights the importance of natural light to the hospital architecture, to foster the creation of environments that encourage and assist in the recovery of patients in the rehabilitation process. Therefore, interferes with health humanization through positive actions in the physiological and emotional effects of natural light, as facilitators of the health recovery process. In Brazil hospital openings systems projects are built exclusively to follow requirements of the local construction code which do not consider the landscape, but only ventilation and heat stroke; and the luminance levels are treated just as recommendations for artificial lighting. The National Policy for Healthcare Humanization presents the environmental comfort as a priority. However, it does not guidelines for achieving it. In this context this research aims to evaluate the lighting comfort in infant therapeutic areas from the professional satisfaction, in order to identify human preferences on the variables: technical and constructive aspects, relationship with the exterior, internal visual interface and quality elements. With this purpose it was adopted as research strategy the Post-Occupancy Evaluation (Technical Functional) through a multi method approach, which included a case study in the rehabilitation gym of Children Rehabilitation Center, at Natal, Rio Grande do Norte, and a reference study at SARAH Rehabilitation Center, Fortaleza Unit at Ceará, both in Brazil northeast. The results indicate that the definition of openings systems should consider external and internal factors to the building, as the natural landscape, the immediate surroundings and activities to be performed. The POE found out the preference of the professional visual privacy in detriment to other analyzed aspects. Thus, it is expected that this study can contribute to the discussion of luminous quality and generate inputs for future projects or renovations in the Children's Rehabilitation Centers, which should not be projected as hospitals
Resumo:
This thesis is part of research on new materials for catalysis and gas sensors more active, sensitive, selective. The aim of this thesis was to develop and characterize cobalt ferrite in different morphologies, in order to study their influence on the electrical response and the catalytic activity, and to hierarchize these grains for greater diffusivity of gas in the material. The powders were produced via hydrothermal and solvothermal, and were characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy (electron diffraction, highresolution simulations), and energy dispersive spectroscopy. The catalytic and electrical properties were tested in the presence of CO and NO2 gases, the latter in different concentrations (1-100 ppm) and at different temperatures (room temperature to 350 ° C). Nanooctahedra with an average size of 20 nm were obtained by hydrothermal route. It has been determined that the shape of the grains is mainly linked to the nature of the precipitating agent and the presence of OH ions in the reaction medium. By solvothermal method CoFe2O4 spherical powders were prepared with grain size of 8 and 20 nm. CoFe2O4 powders exhibit a strong response to small amounts of NO2 (10 ppm to 200 ° C). The nanooctahedra have greater sensitivity than the spherical grains of the same size, and have smaller response time and shorter recovery times. These results were confirmed by modeling the kinetics of response and recovery of the sensor. Initial tests of catalytic activity in the oxidation of CO between temperatures of 100 °C and 350 °C show that the size effect is predominant in relation the effect of the form with respect to the conversion of the reaction. The morphology of the grains influence the rate of reaction. A higher reaction rate is obtained in the presence of nanooctahedra. In order to improve the detection and catalytic properties of the material, we have developed a methodology for hierarchizing grains which involves the use of carbonbased templates.
Resumo:
Macrobrachium rosenbergii is a freshwater prawn which presents agonistic behavior and heterogeneous growth. It is known that captive conditions can intensify agonism causing injuries and decreased survival, generating a condition of poor welfare. Based on this, we aim to investigate the behavior of M. rosenbergii in the juvenile phase according to different types of shelter and frequencies of feed offer, emphasizing their agonistic behavior. For this, juveniles were observed in the laboratory in three steps. At step I we characterized the behavioral profile; prawns were kept in eight aquariums (27 prawns/m2 ), identified and observed four times along both phases of 24 h light cycle. At step II (2 experiments), we evaluated the use of shelters (brick or polyethylene rolls) and their influence on agonism by the animals. For classification of animals in dominance rank, the method used was David's Score. At step III (3 experiments), we evaluated different frequencies of feed offer on the behavior of individuals, in particular agonism. Results showed that juveniles do not present a pattern activity/inactivity between the phases of the light cycle. We identified a dominance hierarchy among individuals taking advantage of access to food by the dominant, which showed greater weight gain although the frequency of intake did not differ between individuals. The type of shelter influenced the behavior of animals. Brick shelter generated a higher frequency of permanence and a reduction in the frequency of agonistic interactions. The distribution of food more frequently throughout the day, decreased the motivation of animals for food, as well as to fight. Prawns fed four times showed lower frequency of feed intake and agonistic interactions. Thus, we conclude the shelters which reduce animal’s detection by coespecifics and offer the food four times along the day reduce agonistic behavior. This result causes na improvement in life quality of the prawns and also in its quality as final product.
Resumo:
The teaching profession is often associated with extensive workload inside and outside the classroom, poor teaching conditions, among other challenges that can cause sleep problems. These problems may be even greater in women, due to the professional and domestic work hours and to the major sleep necessity. Considering that sleeping problems may result from the practice of poor sleep habits, sleep education programs are conducted with the aim to reduce sleep deprivation, irregularity on sleep schedules, daytime sleepiness and improve sleep quality. In this sense, the objective of this study is to evaluate the influence of working hours, gender and a sleep education program on sleeping habits, quality of sleep, daytime sleepiness and the level of stress in teachers of elementary and secondary education. For that, teachers filled the questionnaires that assessed: 1. Sleeping habits (Sleep & Health), 2. Chronotype (Horne & Ostberg), 3. Daytime sleepiness (Epworth Sleepiness Scale), 4. Sleep Quality (Pittsburgh Sleep Quality Index), 5. Level of stress (The Inventory of Stress for Adults of Lipp) and 6. Daily pattern of sleep/wake cycle (Sleep Diary). The questionnaires 1, 4, 5 and 6 were repeated 3 weeks after the sleep education program. Teachers who begin work in the morning (7:11 ± 0:11 h) wake up earlier in the week and often have poor sleep quality compared to those who start in the afternoon (13:04 ± 00:12 h). Among those who begin work in the morning, the intermediate types and those with an evening tendency were more irregular in the wake up time than morning types and increased sleep duration on weekend. In relation to gender, women had longer sleep duration than men, although the majority presented excessive daytime sleepiness and poor sleep quality. However, when work schedule and age are similar between genders, the difference in sleep duration becomes a tendency and the difference in the percentage of excessive daytime sleepiness disappears, but the poor sleep quality persists in women. With respect to teachers who have gone through the sleep education program, there was an increase in knowledge about the subject, which may have contributed to the reduction in the frequency of coffee consumption close to bedtime and to the sleep quality improved in 18 % of participants. In the control group, there were random differences in knowledge in 3rd stage, and sleep quality improved in only 9% of teachers. The participation in the sleep education program was not enough to change the hours of sleep and decrease stress of teachers. Therefore, the start time school in the morning was preponderant in determining the wake up time of teachers, especially for intermediates types and those with an evening tendency. Furthermore, the poor quality of sleep was more common in women, and the sleep education program contributed to increase knowledge on the subject and to improve sleep quality.
Resumo:
The contamination of water sources of public drinking by waste originated by anthropogenic activities has brought various risks to human health. Among the consequences of such activities can highlight the bloom of microalgae and cyanobacteria, which have the potential to produce toxins dangerous to humans, and the presence of humic substances that are generated by the decomposition of natural organic matter (NOM), such as vegetation. When found in water sources for public supply, present negative aspects conferring high color, odor and taste. The double filtration technology has good efficiency in water with the presence of cyanobacteria and different quality variations. Therefore, this study aimed to evaluate the behavior of the technique of double filtration with pre-oxidation for water purifiers the lagoon of Extremoz-RN, which currently has high concentrations of cyanobacteria. The research is summarized in four phases: the first phase turned to static tests in jarteste equipment in the laboratory and subsequent phases were tested in the Pilot Plant of Double Filtration. For the second and third stage filtration rates were tested filtration rates of 120 and 180 m3 / m2 .day for ascending boulders filters and 160 and 240 m3 / m2 .day in the filters in quick sand descendants. The last phase aimed to evaluate the double filtration with pre-oxidation. The results demonstrated that the system could produce double filtration in all trials of good quality water according to the Decree nº. 2914/11 of the Ministry of Health. The use of preoxidation favored the removal of microcystin and color at the end of the tests, reaching a percentage of color removal around 60%. The analysis of variance in the data, enabled prove that the filtration rates of 180 m3 / m2.d the gravel filter and 240 m3 /m2 .d in rapid filters, were the most significant for the removal of turbidity. The ascending filter of boulder 4 with particle size finer filter layer showed the best performance and the best means of turbidity and apparent color. The rapid filter downward 1 was more efficient in removing turbidity reaching removal about 100%
Resumo:
One of the main problems related to the use of diesel as fuel is the presence of sulfur (S) which causes environmental pollution and corrosion of engines. In order to minimize the consequences of the release of this pollutant, Brazilian law established maximum sulfur content that diesel fuel may have. To meet these requirements, diesel with a maximum sulfur concentration equal to 10 mg/kg (S10) has been widely marketed in the country. However, the reduction of sulfur can lead to changes in the physicochemical properties of the fuel, which are essential for the performance of road vehicles. This work aims to identify the main changes in the physicochemical properties of diesel fuel and how they are related to reduction of sulfur content. Samples of diesel types S10, S500 and S1800 were tested according with the methods of the American Society for Testing and Materials (ASTM). The fuels were also characterized by thermogravimetric analysis (TG) and subjected to physical distillation (ASTM D86) and simulated distillation gas chromatography (ASTM D2887). The results showed that the reduction of sulfur turned the fuel lighter and fluid, allowing a greater applicability to low temperature environments and safer for transportation and storage. Through the simulated distillation data was observed that decreasing sulfur content resulted in higher initial boiling point temperatures and the decreasing of the boiling temperature of the medium and heavy fractions. Thermogravimetric analysis showed a loss event mass attributed to volatilization or distillation of light and medium hydrocarbons. Based on these data, the kinetic behavior of the samples was investigated and it was observed that the activation energies (Ea) did not show significant changes throughout conversion. Considering the average of these energies, the S1800 had the highest Ea during the conversion and the S10 the lowest values
Resumo:
Several materials are currently under study for the CO2 capture process, like the metal oxides and mixed metal oxides, zeolites, carbonaceous materials, metal-organic frameworks (MOF's) organosilica and modified silica surfaces. In this work, evaluated the adsorption capacity of CO2 in mesoporous materials of different structures, such as MCM-48 and SBA- 15 without impregnating and impregnated with nickel in the proportions 5 %, 10 % and 20 % (m/m), known as 5Ni-MCM-48, 10Ni-MCM-48, 20Ni-MCM-48 and 5Ni-SBA-15, 10NiSBA-15, 20Ni-SBA-15. The materials were characterized by means of X-ray diffraction (XRD), thermal analysis (TG and DTG), Fourier transform infrared spectroscopy (FT-IR), N2 adsorption and desorption (BET) and scanning electron microscopy (SEM) with EDS. The adsorption process was performed varying the pressure of 100 - 4000 kPa and keeping the temperature constant and equal to 298 K. At a pressure of 100 kPa, higher concentrations of adsorption occurred for the materials 5Ni-MCM-48 (0.795 mmol g-1 ) and SBA-15 (0.914 mmol g-1 ) is not impregnated, and at a pressure of 4000 kPa for MCM-48 materials (14.89 mmol g-1) and SBA-15 (9.97 mmol g-1) not impregnated. The results showed that the adsorption capacity varies positively with the specific area, however, has a direct dependency on the type and geometry of the porous structure of channels. The data were fitted using the Langmuir and Freundlich models and were evaluated thermodynamic parameters Gibbs free energy and entropy of the adsorption system
Resumo:
This study aimed to analyze the biological response of titanium surfaces modified by plasma Ar + N2 + H2. Titanium disks grade II received different surface treatments Ar + N2 + H2 plasma, constituting seven groups including only polished samples used as standard. Before and after treatment the samples were evaluated in terms of topography, crystal structure and wettability, using atomic force microscopy, X-ray diffraction, Raman spectroscopy and testing of the sessile drop, respectively. Rich plasma (PRP) was applied to the surfaces modified in culture plates. Images obtained by scanning electron microscopy of the adhered platelets were analyzed to verify the behavior of platelets in the different experimental conditions. We verified that the adition of H2 on plasma atmosphere resulted in more rough surfaces, with round tops. These surfaces, in contrast to that surfaces treated with high concentration of N2, are less propense to platelet aggregation and, consequently, to the formation of thrombus when applied in biomedical devices.
Resumo:
This work aims to analyze, in terms of class, the social composition of the constituency of the presidential candidates of the Workers Party in 2002, 2006 and 2010 elections. Such research object is constructed from a preliminary critical debate with recent Brazilian electoral studies, especially the literature on the infl uence of social programs on voting and Singer’s formulations about the lulismo phenomenon. Incorporating advances and pointing out gaps in such research efforts, is formulated a roadmap for empirical research constituted of three key elements - the measure ment of the dimensions of class structure in Brazilian capitalism; the observation of material interests related to the constituents locations of such structure; the development of measures of association between the insertion in class groupings and indivi dual voting behavior. Based on the neo - Marxist approach of class analysis, especially as formulated by Wright, it is made an adaptation of the typology formulated by such approach (mainly developed by Santos to the Brazilian case) to the data available fro m databases of censuses of 2000 and 2010. This theoretical construct reveals that during the period considered for the analysis, the structure of class - relations in Brazil became more proletarized and consequently had a decrease of the dimensions of the de stitute class locations. In addition, it was found, in relation to the objective class interests, widespread increments of economic welfare that allowed advances in relation to the material conditions of the proletariat, without, however, incurring losses to the privileged class positions. Such changes in the structural sphere focused in various ways on the political arena. Based on an adaptation to electoral analysis of the concept of "class formation", also formulated by Wright, associated with the use of techniques of ecological inference (especially those proposed by King and associates), it was possible to draw up an overview of class voting in period studied. As main results, three general patterns of individual voting behavior, related to each of the three analyzed class groupings were identified - a contraposition against PT candidates, by voters in privileged class locations; the adhesion, recurring throughout the study period, of workers to Lula and Dilma Rousseff; a favorable electoral shift unde rtaken by economically deprived voters in favor of those candidatures in the 2006 election.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq