Proposta metodológica para o imageamento, caracterização, parametrização e geração de modelos virtuais de afloramentos

The aim of this work was to describe the methodological procedures that were mandatory to develop a 3D digital imaging of the external and internal geometry of the analogue outcrops from reservoirs and to build a Virtual Outcrop Model (VOM). The imaging process of the external geometry was acquired by using the Laser Scanner, the Geodesic GPS and the Total Station procedures. On the other hand, the imaging of the internal geometry was evaluated by GPR (Ground Penetrating Radar).The produced VOMs were adapted with much more detailed data with addition of the geological data and the gamma ray and permeability profiles. As a model for the use of the methodological procedures used on this work, the adapted VOM, two outcrops, located at the east part of the Parnaiba Basin, were selected. On the first one, rocks from the aeolian deposit of the Piaui Formation (Neo-carboniferous) and tidal flat deposits from the Pedra de Fogo Formation (Permian), which arises in a large outcrops located between Floriano and Teresina (Piauí), are present. The second area, located at the National Park of Sete Cidades, also at the Piauí, presents rocks from the Cabeças Formation deposited in fluvial-deltaic systems during the Late Devonian. From the data of the adapted VOMs it was possible to identify lines, surfaces and 3D geometry, and therefore, quantify the geometry of interest. Among the found parameterization values, a table containing the thickness and width, obtained in canal and lobes deposits at the outcrop Paredão and Biblioteca were the more relevant ones. In fact, this table can be used as an input for stochastic simulation of reservoirs. An example of the direct use of such table and their predicted radargrams was the identification of the bounding surface at the aeolian sites from the Piauí Formation. In spite of such radargrams supply only bi-dimensional data, the acquired lines followed of a mesh profile were used to add a third dimension to the imaging of the internal geometry. This phenomenon appears to be valid for all studied outcrops. As a conclusion, the tool here presented can became a new methodology in which the advantages of the digital imaging acquired from the Laser Scanner (precision, accuracy and speed of acquisition) were combined with the Total Station procedure (precision) using the classical digital photomosaic technique

Aplicação de resíduo industrial para isolamento térmico: uma proposta para utilização do poliuretano de mamona com agregado de resíduo plástico termofixo

A aplicação de isolantes térmicos em sistemas construtivos promove vantagens com vistas ao conforto térmico de ambientes. E com isso, o aumento da produtividade em locais de trabalho, a sensação de bem-estar e a diminuição dos custos com climatização. A demanda por conforto ambiental, no âmbito da isolação térmica, somada ao advento de novas leis que regulam os requisitos mínimos de conforto, as exigências dos consumidores pela adoção de métodos de produção mais “limpos”, a fiscalização quanto à destinação de resíduos industriais, além da inserção de produtos no mercado com apelos ambientais, incentivaram o desenvolvimento da presente pesquisa. O presente trabalho trata da aplicação do poliuretano, visando comparar o desempenho térmico do derivado de origem vegetal (óleo de mamona) com adição de resíduo plástico termofixo em diferentes proporções (5%, 10%, 15% e 20%), com o poliuretano petrolífero, a lã de vidro e a lã de rocha através da análise de suas propriedades térmicas (condutividade térmica – k, difusividade térmica – e capacidade calorífica – Cp). . Após a realização dos ensaios, os compósitos estudados foram moídos e reutilizados como carga para novos compósitos. Com base nos resultados dos ensaios de propriedades térmicas, constatou-se que o material desenvolvido conduz menos calor que o poliuretano de petróleo, a lã de vidro e a lã de rocha, além de oferecer alta inércia térmica, bom desempenho térmico e baixo custo. Assim como foi comprovada a possibilidade de fabricação de novos compósitos para fins de isolamento, reutilizando os compósitos testados

Uma nova proposta de antena planar multibanda para comunicações móveis

The great interest observed in wireless communication systems has required the development of new configurations of microstrip antennas, because they are easily built and integrated to other microwave circuit components, which is suitable for the construction and development of planar antenna arrays and microwave integrated circuits. This work presents a new configuration of tapered microstrip antenna, which is obtained by impressing U-slots on the conducting patch combined with a transmission line matching circuit that uses an inset length. It is shown that the use of U-slots in the microstrip antenna conducting patch excites new resonating modes, that gives a multiband characteristic for the slotted microstrip antenna, that is suitable for applications in communication systems that operates several frequencies simultaneously. Up to this date, the works reported in the literature deals with the use of Uslotted microstrip rectangular antennas fed by a coaxial probe. The properties of a linear array of microstrip patch tapered antennas are also investigated. The main parameters of the U slotted tapered microstrip antennas are investigated for different sizes and locations of the slots impressed on the conducting patch. The analysis of the proposed antenna is performed by using the resonant cavity and equivalent transmission line methods, in combination with a parametric study, that is conducted by the use of the Ansoft Designer, a commercial computer aided microwave software well known by its accuracy and efficiency. The mentioned methods are used to evaluate the effect in the antennas parameters, like resonant frequency and return loss, produced by variations of the antenna structural parameters, accomplished separately or simultaneously. An experimental investigation is also developed, that consists of the design, construction and measurement of several U slotted microstrip antenna prototypes. Finally, theoretical and simulated results are presented that are in agreement with the measured ones. These results are related to the resonating modes identification and to the determination of the main characteristics of the investigated antennas, such as resonant frequency, return loss, and radiation pattern

Uma proposta alternativa para o ensino progressões relacionadas a funções

Generally, arithmetic and geometric progressions are taught separately from ane and exponential functions, only by the use of memorized formulas and without any concern of showing students how these contents are related. This paper aims at presenting a way of teaching such contents in an integrated way, starting with the definition of ane and exponential functions relating them to situations from the daily life of the students. Then, characteristics and graphics of those functions are presented and, subsequently, arithmetic and geometric progression are shown as a restriction of the ane and exponential functions. Thus, the study of the progressions is introduced based on the functions mentioned above using situations from students daily lives as examples

Proposta de critérios adicionais para definição de Área Prioritária para Conservação no Semiárido brasileiro

Environmental changes and their consequences on the global level have challenged the different fields of study to integrate towards effective solutions to minimize and /or equate the negative impacts of these changes in different types of environments. In this context, the Environmental Perception has been a widely used and relevant in studies that consider the relationship between the environment and human actions, by allowing analysis of perceptions, attitudes and values, key influencers of topophilia that resonates in conservation tool. Allied to Environmental Perception, Integrated Analysis of the Landscape is relevant because it allows to analyze in a systematic way the geographical space where all its elements are interrelated in a way that supports needed to understand the complex physical and human environment of a given environment. In this perspective, we have studied the João do Vale Serrano Complex, located in semiarid of Rio Grande do Norte state, which features a set of landscapes with different faces, which are being replaced by various economic activities and disordered population growth, with consequent exploitation the potential of natural resources. This thesis main goal was to combine the Environmental Perception of rural communities to the of Serrano Complex Landscape Analysis as additional criteria for the definition of Priority Areas for Conservation. The perception data were collected through direct observation, questioning, interviews and application forms to 240 people (100 % of occupied households in the mountain community) during the months of february and august 2011, with theoretical and methodological basis Environmental Perception. Integrated Landscape Analysis was performed by GTP (Geosystem - Territory - Landscape) method, using the Geographic Information System (GIS), using the technique of GIS for mapping the landscape. The results showed that respondents have a sense of topophilia by where they live, hold a vast knowledge of the natural resources in this Serrano Complex, and responded positively regarding the choice of an exclusive area for conservation. The Integrated Analysis of Landscape possible to identify the different forms of existing uses and occupations in Serrano Complex, have caused significant changes in space, especially on the plateau where vegetation was virtually replaced by human dwellings and cashew plantations. Through the maps of slope and environmental vulnerability was identified that areas with high slopes (gullies) are limiting factor for occupation by communities and therefore relevant and amenable to conservation, including by being Permanent Preservation Areas. These results, together, made possible to define a map of Priority Areas for Conservation in Serrano Complex, with three priority categories: low, medium and high. Therefore, the use of these additional criteria are relevant for the definition /designation of Priority Areas for Conservation

Proposta metodológica para o imageamento digital e modelagem virtual 3d de um bloco de rochas travertinas

In this paper we present the methodological procedures involved in the digital imaging in mesoscale of a block of travertines rock of quaternary age, originating from the city of Acquasanta, located in the Apennines, Italy. This rocky block, called T-Block, was stored in the courtyard of the Laboratório Experimental Petróleo "Kelsen Valente" (LabPetro), of Universidade Estadual de Campinas (UNICAMP), so that from it were performed Scientific studies, mainly for research groups universities and research centers working in brazilian areas of reservoir characterization and 3D digital imaging. The purpose of this work is the development of a Model Solid Digital, from the use of non-invasive techniques of digital 3D imaging of internal and external surfaces of the T-Block. For the imaging of the external surfaces technology has been used LIDAR (Light Detection and Range) and the imaging surface Interior was done using Ground Penetrating Radar (GPR), moreover, profiles were obtained with a Gamma Ray Gamae-spectômetro laptop. The goal of 3D digital imaging involved the identification and parameterization of surface geological and sedimentary facies that could represent heterogeneities depositional mesoscale, based on study of a block rocky with dimensions of approximately 1.60 m x 1.60 m x 2.70 m. The data acquired by means of terrestrial laser scanner made available georeferenced spatial information of the surface of the block (X, Y, Z), and varying the intensity values of the return laser beam and high resolution RGB data (3 mm x 3 mm), total points acquired 28,505,106. This information was used as an aid in the interpretation of radargrams and are ready to be displayed in rooms virtual reality. With the GPR was obtained 15 profiles of 2.3 m and 2 3D grids, each with 24 sections horizontal of 1.3 and 14 m vertical sections of 2.3 m, both the Antenna 900 MHz to about 2600 MHz antenna. Finally, the use of GPR associated with Laser Scanner enabled the identification and 3D mapping of 3 different radarfácies which were correlated with three sedimentary facies as had been defined at the outset. The 6 profiles showed gamma a low amplitude variation in the values of radioactivity. This is likely due to the fact of the sedimentary layers profiled have the same mineralogical composition, being composed by carbonate sediments, with no clay in siliciclastic pellitic layers or other mineral carrier elements radioactive

Proposta de zoneamento geoambiental do município do Crato/CE

The geo-environmental zoning is an important means to plan the management of the territory, once it is the result of integration of different elements of the physical environment. The Municipality of Crato has a diversity of geo-environmental systems due to its complex landscape, which characterization and delimitation will contribute to the most appropriate occupation and the fewer prejudicial to municipal area. This study, which was supported by geo-systemic theory, searched to reach the following objectives: to elaborate a proposal of geo-environmental zoning; to characterize identified and demarcated geo-environmental systems, including their potentiality and limitations of land use and human occupation; and to generate a database on digital maps through GIS Geographic Information System. Four geo-environmental systems were identified (Chapada do Araripe: plateau and hillside, Massif and residual crest, Sertão of peripheric southern depression and fluvial Plains) and ten geo-environmental subsystems (Eastern plateau covered by cerradão/cerrado, Western plateau covered by cerrado/carrasco, Northern-west hillside, central residual Massif, Northern Residual Massifs, Sertaneja depression dominated by sedimentary materials, Sertaneja depression dominated by embasement crystalline material; wet fluvial plains and dry fluvial plains). The identified system and subsystem are similar to those proposed by FUNCEME in spite of some changes due to the more detailed mapping

Orientação geográfica: uma proposta metodológica para o ensino da geografia na 5ª série

Cartographical representations (maps, charters and plans) are taken as didactic resources in Geography classes in the 5th grade of the municipal public schools in São José de Ribamar through a methodological approach taking into consideration the use of those resources is still worries an important part of the teachers of the Maranhão State public schools who teach in this level. Papers related to the theme, most of the time, are non accessible to the teachers of the maranhense public schools, mainly because the education instilutions, which use those resources, do it in a very incipient way. So this research proposes from the drawings of magnetccoursein the school courtyards, together with maps, charts, plans among others representation used in the classroom environment, motivate the students to a deeper interests in participating in Geography learning process in the 5th grade. Interviews, analyses of socialcultural questionnaires of the families involved in the process; observations of classes, trainings, geocartographical orientations, application of pre and posttests, discussions about the usage of cartographic representations, proposed and effectivated tasks in the classroom, as well as around the school, were the basis of the researched population. As a result of this process, it was produced a was complement didatical material showing, among others, the space in which students, for sure, will contribute in an effective way to a better teaching practice in the chain of maranhense public schools, having in mind that these geographic subjects may be taught in the level we focused our study