Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Falhas e complicações com o uso de prótese parcial removível inferior de extremidade livre bilateral

Aim: To determine the frequency and type of complications related to removable partial denture (RPD) less, Kennedy Class I, over time . Materials and Methods: This observational study consisted of a sample of 65 users PPR lower arches in Kennedy Class I and dentures, rehabilitated in the Department of Dentistry, Federal University of Rio Grande do Norte (UFRN). Patients were followed through periodic controls during periods of 60 days, 6 months and 1 year from installation. After the first year of control had other returns annually. The occurrence of complications or prosthetic failure was observed and recorded in a specific clinical record over 39 months. The patterns of failures observed were classified in the following situations: occurrence of traumatic ulcers after 2 months of installation, lack of retention, fracture or caries in the rest, fracture or dislocation of the artificial teeth, the larger connector fracture, fracture clip fracture support, poor support (need to reline the denture) and prosthesis fracture. Results: The incidence of complications was low frequency, being higher in the second year of use of the prosthesis. Among the complications that occurred more is the loss of retention (31.57%). Failures more severe and difficult to solve as the fracture elements of the metal structure of the PPR had low occurrence and were represented by only one case of the larger connector (5.3%) fractures. Conclusion: Removable partial dentures mandibular free end opposing of the conventional dentures have a low complication rate after 39 months of use when subjected to periodic controls

Violência nas escolas: Um novo olhar ante as relações sociais

The most varied ways of manifestation of the violence phenomenon in the contemporary society are each time more found in the media spaces and among society discussions. It makes think about procedures to be taken before the growth and new outbreaks of such phenomenon. The violences manifestations in schools reveal themselves as a reflection of what happens in the scope of social violence. Its dynamics originates in society and reflects itself in scholl, that is, the violences in schools combine internal and external elements to school enviroment of many fields and spheres of which the individuals participate. To reflect about the violences in the schools requires, over all, to make a bridge with the categories: youth and violence. Violences in schools: A new look to the social relations, is a Ms. Sc. Dissertation that has as main objective: to analyze the main existing forms of violence in the school space. For its achievement, it was made a bibliographical survey, questionnaires application (annexed) and observation. Thus, this research articulated the two approaches: qualitative and quantitative. The questionnaires application happened in a state school of the Natal city and amongst yhe criteria for this choice there was the fact of the school had more than 500 pupils, to be located on a strategical place of the city, providing a subjects heterogeneity to be researched, deyond the limitations of available resources financial and material and the available time for the research accomplishment. The scool congregates objective conditions, specifically in what concerns the criteria previously defined: age range, socioenomical level and number of pupils. Amongst the main results obtained, it can be detached that the violence is a phenomenon seen, for the great majority of the research subjects, as a phenomenon connected to the most visible violence forms: the agressions. And a question always present in the public education institutions: infrastructures precariousness, high scool evasion índex and vulnerability among the pupils that makes possible to the pupil to see school as an home extension. Such dissertation concludes that the phenomenon of the violence in scools demands and requires of the most varied subjects involved in the processes na understanding of its determinants so that thus, one can intervene in such phenomenon that does not restrains itself to the physical acts of aggression, but that it is, over all, on a non respecting the different

BRIDGE: uma ferramenta para o Design de Interfaces de Usuário baseada em especificações IMML

With hardware and software technologies advance, it s also happenning modifications in the development models of computational systems. New methodologies for user interface specification are being created with user interface description languages (UIDL). The UIDLs are a way to have a precise description in a language with more abstraction and independent of how will be implemented. A great problem is that even using these nowadays methodologies, we still have a big distance between the UIDLs and its design, what means, the distance between abstract and concrete. The tool BRIDGE (Interface Design Generator Environment) was created with the intention of being a linking bridge between a specification language (the Interactive Message Modeling Language IMML) and its implementation in Java, linking the abstract (specification) to the concrete (implementation). IMML is a language based on models, that allows the designer works in distinct abstraction levels, being each model a distinct abstraction level. IMML is a XML language, that uses the Semiotic Engineering concepts, that deals the computational system, with the user interface and its elements like a metacommunicative artifact, where these elements must to transmit a message to the user about what task must to be realized and the way to reach this goal. With BRIDGE, we intend to supply a lot of support to the design task, being the user interface prototipation the greater of them. BRIDGE allows the design becomes easier and more intuitive coming from an interface specification language

Metais pesados no caranguejo Ucides cordatus (Linnaeus, 1763) e ecotoxicologia de sedimentos do estuario dos Rios Jundiai e Potengi - RN

This study is conducted in the estuary of the rivers Jundiaí and Potengi, one of the most important estuaries of Rio Grande do Norte, which suffers a strong anthropogenic influence from neighboring cities. According to Resolution 344/2005 environments that have high concentrations of metals such as arsenic, cadmium, lead and mercury need ecotoxicological tests. This study aims to evaluate the heavy metals contamination in the estuary through analysis of sediment collected at four points distributed from Macaíba to Natal city, and in the crab Uçá, Ucides cordatus. The study aims also to evaluate the effects of sediment toxicity in the tests organisms Leptocheirus plumulosus. To obtain data about the concentrations of heavy metals in the environment, sediments were collected in January and May 2011 and crab Uçá was collected in June 2011. On the other hand the monitoring was carried out through toxicological tests with sediment collected from July to October 2011. During the collection of sediment samples the physico-chemical parameters of water (dissolved oxygen, pH, chloride, turbidity, conductivity and temperature) were measured by using multi-parametric probe (TROLL 9500). It was possible to identify contamination by metals such as lead, cadmium, arsenic and copper both in the sediment and in the Uçá crab, which characterizes that the consumption of this crustacean may be a risk to human health. Once the concentrations of metals were identified, toxicology tests were performed and revealed toxic effect to organisms in at least one of the four months studied. Point 2 was classified as toxic in three of the four months studied . The heavy metal contamination is a risk to the environment, to aquatic organisms and to the community which survives of resources taken from the environment