93 resultados para Desempenho do trabalho


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objective of this work was to evaluate the effect of supplements feeding on growth of calves grazing a Panicum maximum cv. Mombaça pasture during the dry season. The experimental design was a randomized blocks with three treatments and three replications. The treatments were: mineral salt ad libidum; multiple mixture (MM) fed at 0.2% of live weight (PV); and, concentrate feed (SC) fed at 0.7% of PV. Thirty six weaned calves averaging eight months and 192 kg of initial live weight were utilized. The masses and pasture components, nutritive value and rate of forage growth were evaluated. Animal performance was measured as average daily gain (ADG) and live weight gain (LWG). The supplemental feeding was adjusted after weighing. There was no difference between periods for forage mass and leaf: stem ratio. The highest values for forage green mass, leaf blades mass and stem percentage were observed in the first trial period. The canopy height and the available forage on offer did not differ among treatments. The percentage of dead was higher for the last periods of evaluation. The leaf: stem ratio and the leaf percentage were greater in the second period. There was significant difference (p<0,05) among treatments for the ADG and were 250, 460 and 770 g/day for salt, MM and SC, respectively. The biggest LWG was observed in the treatment SC. contents of PB, DIVMO, NDF and LDA on leaf blades, thatched roofs and dead material dead not differ among treatments. The highest GPV was observed in the SC treatment. The contents of PB, DIVMO, NDF and LDA for leaf blades stem and dead material did not differ among treatments. Independent of the use supplements , it is possible to keep steers gaining weight, during dry season, since the stocking rate is appropriately adjusted

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The plus-maze discriminative avoidance paradigm has been used to study the relationship between aversive memory and anxiety. The present study aims to verify if the elevated plus-maze can provide information about appetitive memory and anxiety, through a task motivated by food reward. Animals were allowed to explore an elevated plus-maze and received reinforcement in one of the enclosed arms. In a test session performed 24h later, in the absence of reward, rats showed preference for the previously rewarded enclosed arm over the neutral enclosed arm. The administration of diazepam and pentylenetetrazole before training induced, respectively, anxiolytic and anxiogenic effects (as evaluated by open-arm exploration). Both drugs induced amnestic effects, i.e., lack of preference for the rewarded arm in the test session. The results suggest that appetitive memory can be influenced by anxiety levels as well. The plus-maze appetitive discrimination task seems to be a useful model to investigate the relationship between memory and anxiety

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Shift work consists of an array of unusual work hours, such as evenings and weekends, and increasing workload, in order to meet the uninterrupted production, which leads to changes in the quality, duration and regularity of sleep. Research indicates that sleep alteration cause cognitive processes to become slower, unstable and prone to errors, leading to loss of cognitive functions such as visuospatial perception. In this sense, this research aimed to evaluate sleep quality and its relation to visuospatial perception in workers in alternating shifts. Participants were 21 panel operators in a petrochemical company, male, aged 19-53 years. All participants were subjected to schedules of alternating shifts (day and night) of 12 nonstop hours and data were collected from 10 workers who were assigned to the day shift and 11 workers assigned to the night shift. For the sleep evaluation were used the Sleep Diary, the Sleep Habits Questionnaire, the Chronotype Identification Questionnaire and the Pittsburgh Sleep Quality Index (PSQI). The visuospatial skills were assessed using the Rey Complex Figure Test and attention was assessed using a portable version of the Psychomotor Vigilance Task (PVT). The results showed that the general sample of workers obtained poor sleep quality on working days and good sleep quality during the work break. There was shortened sleep duration in the work week and appropriate duration in the work break. No losses were found in the workers visuospatiality, but the good quality of sleep during the work break was correlated to adequate visuospatial performance, for the day shift workers. The attention performance oscillated throughout the work hours, especially on the night shift. It is concluded that the alternating shifts work scheme can be detrimental to the sleep quality workers and a good sleep quality can contribute to a better visuospatial performance

Relevância:

30.00% 30.00%

Publicador:

Resumo:

One of the main applications of methane is in the production of syngas, a mixture of hydrogen and carbon monoxide. Procedures used in this process are steam reforming, CO2 reforming, partial oxidation and autothermal reforming. The present study evaluated and compared the behavior of nickel catalysts supported on mixed oxides of cerium and manganese in the partial oxidation of methane with that of nickel catalysts supported on mixed oxides of cerium and zirconium. Mixed oxides of cerium and zirconium or cerium and manganese were synthesized using two different preparation methods, the polymeric precursor based on Pechini method and combustion reaction using a microwave. This was followed by impregnation with nickel content of 15 %. Samples were calcined at 300, 800 and 900 °C and characterized by specific surface area (SSA), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature programmed reduction (TPR) and the reaction of partial oxidation of methane. The specific areas of samples decrease with the rise in calcination temperature and after nickel impregnation. Metal-cerium solid solution was formed and the presence of other manganese species outside the solid solution structure was confirmed in the compound with the highest amounts of manganese oxides showed. With regard to scanning electron microscopy, supports based on cerium and zirconium prepared by Pechini method exhibited agglomerated particles without uniform geometry or visible pores on the surface. However, compounds containing manganese presented empty spaces in its structure. Through synthesis by combustion reaction, morphology acquired independently of the proposed composition demonstrated greater porosity in relation to Pechini synthesis. Although catalysts were prepared using different synthesis methods, the insertion of nickel showed very similar reduction profiles (TPR). In relation to nickel catalysts supported on mixed oxide of cerium and zirconium, there is an initial reduction of NiO species that present certain interaction with the support. This is followed by the reduction of Ce4+ in Ce3+ surface, with subsequent bulk reduction. For catalysts containing manganese, a reduction of nickel oxide species occurs, followed by two stages of reduction for species Mn2O3 in Mn3O4 and Mn3O4 in MnO, with subsequent reduction of bulk. With respect to partial oxidation reactions, the nickel catalyst supported on mixed oxide of cerium and zirconium, prepared using the Pechini method, exhibited CH4 conversion of approximately 80 %, with conversion of 81 % when prepared by combustion. This behavior continued for 10 hours of reaction. Manganese content was also found to directly influence catalytic activity of materials; the greater the manganese oxide content, the faster deactivation and destabilization occurred in the catalyst. In both synthesis methods, the nickel catalyst supported on mixed oxide of cerium and zirconium maintained an H2/CO ratio very close to 2 during the 10 hours of partial oxidation reaction. Samples containing manganese displayed smaller H2/CO ratios and lower performance in partial oxidation.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis aims to identify how civil servants perceive changes made inthe carrying out of their work after their taking part in the Course forTechnicians in Public Management of the Government of Rio Grande do NorteState. As for the methodological procedures, an exploratory-descriptivequantitative research has been carried out through structured questionnaires appliedto 118 civil servants from the first groups of the Course for Technicians, thusshowing a margin of error of 4.18% to 95% of confidence, according to theprocedures of finite sampling. The table processing and analysis rested uponthe Statistical Package for the Social Sciences SPSS and was carried outthrough univariate, bivariate and multivariate techniques with emphasis on thetechnique called Factor Analysis. It was possible to identify that the level ofsatisfaction of the students was high and there was a clear perception by themthat the course assisted to changes in their work. Through Factor Analysis itwas verified that the factors that may be related to changes in the work of thecivil servants are "Contribution to Society", "Efficiency andEfficacy in the Work Environment", "Applicability of Contents"and "Capacitating for Leadership". The conclusion of the studyindicates that the factors obtained are directly related to the basis of thenew public management by means of guidance toward efficiency and efficacy in aperspective of leadership, the contents of the course being thus made into newattitudes toward work which end up yielding better results for society

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The seismic reflection is used on a large scale in oil exploration. In case of marine acquisition the presence of high impedance contrast at the interfaces water/air generates multiple reflections events. Such multiple events can mask primary events; thus from the interpretational viewpoint it is necessary to mitigate the multiples. In this manuscript we compare two methods of multiple attenuation: the predictive multichannel deconvolution (DPM) and the F-K filtering (FKF). DPM is based in the periodicity of the multiples while FKF is based in multiples and primaries splitting in F-K domain. DPM and FKF were applied in common-offset and CDP gathers, respectively. DPM is quite sensible to the correct identification of the period and size of the filter while FKF is quite sensible to an adequate choice of the velocity in order to split multiples and primaries events in the F-K domain. DPM is a method that is designed to act over a specific event. So, when the parameters are well selected, DPM is very efficient in removing the specified multiple. Then DPM can be optimized by applying it several times, each time with a different parameterization. A deficiency of DPM occurs when a multiple is superposed to a primary event: in this situation, DPM can attenuate also the primary event. On the other hand, FKF presents almost the same performance to all multiples that are localized in the same sector of the F-K domain. The two methods can be combined in order to take advantage of their associated potentials. In this situation, DPM is firstly applied, with a focus in the sea bed multiples. Then FKF is applied in order to attenuate the remaining multiples

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper prese nts the validation of the Performance Indicator System for Projects under Construction - SIDECC. The goal was to develop a system of performance indicators from the macroergonômica approach, con sidering criteria of usefulness , practicality and applicabilit y and the concept of continuous improveme nt in the construction industry . The validation process SIDECC consisted of three disti nct models . Modeling I corresponded to the theoretical development and valid ation of a system of indicators . Modeling II concern s the development and valida tion of multi - indicator system . For this modeling, we used the Mother of Use and Importance and Multivariate Analysis . Modeling III correspo nded to the validation situated , which consisted of a case study of a wo rk of construct ion of buildings , which were applied and anal yzed the results of modeling II . This work resulted in the development of an applied and tested for the construction of an integrated system of per formance indicators methodology , involving aspects of production , quality , e nvironmental, health and safety . It is inferred that the SIDECC can be applied, in full or in part , the construction companies as a whole, as we ll as in other economic sectors .

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In recent years, as part of the expansion process of its activities, the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte – IFRN (Federal Institute for Education, Science and Technology of the State of Rio Grande do Norte – IFRN) detected the need to hire more employees for the institution. This expansion process, a policy of the Federal Government, together with the increase of human resources, required the construction of an adequate facility in the municipality of São Gonçalo do Amarante-RN, for training and qualification and as a means of better enabling its personnel. Along with this policy, the Federal Government is also deeply concerned that its buildings be environmentally friendly. This study deals with this subject matter, as it develops an architectural design of a public building with an emphasis upon the reduction of energy consumption, through the study of energy performance factors such as defined by Carneiro (1988) and adapted by the author of the present study. It is known that residential, commercial and public buildings represent about 45 % of energy consumption in Brazil. That is why it is necessary to consider the reduction of such consumption in buildings, as well as the role that professionals, especially architects, play in this issue. The most effective participation in this regard in the field of architecture occurs in the design phase. However, the architectural solution proposed here goes beyond the energy performance factors, since it also involves other aspects, such as the definition of the concept, the parti and the spatial solution itself. In this sense, the architectural project of the Centro de Treinamento dos Servidores do IFRN - CTSIFRN (Training Center for IFRN Personnel – CTSFIRN) is particularly fitting as a subject for research at the Professional Master Program at PPGAU/UFRN, which is devoted to research on architecture, design and the environment.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work describes the design process of a small recreational gated community in Pium, Nísia Floresta/RN, from concept to final design stages, with emphasis on low environmental impact, thermal comfort and the spatial quality of housing. The process consisted in a review of the literature and relevant standards, studies of design references and architectural programming. The project development was initially focused on the project’s feasibility, with the definition of the number of units, implantation, size and location of the dwellings and the common areas of the development. Two types of houses (four low rise and five duplex units) have been proposed in order to attend the premises of architectural programming. The conception of the architectural design began with the rooms’ zoning according to the lots. This resulted in the pre-selection of three alternatives that were evaluated in terms of spatial quality and environmental performance. The development of sketches focused on the envelope consistent with the bioclimatic guidelines and on the language of the compatible proposal with the lowest possible environmental impact of the building system, which resulted in the selection of the eucalyptus wood type. During the working drawings, the Quality Technical Regulation for the Level of Energy Efficiency Residential Buildings (RTQ -R) was adopted for the evaluation of the envelope, which resulted in "B" level of efficiency for the first case. After minor adjustments, mainly in frames, the efficiency level rose to "A", demonstrating that early project decisions contributed to the envelope energy performance. Besides the design of the two types of units, the final proposal of the gated community includes the design of the equipment for the common areas (entrance, multipurpose room and support and service sector), and the descriptive texts explaining the project and construction’s details.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objective of this research was to evaluate the production of dairy goats fed different species of cactus. Pluriparous five Saanen goats were used, with nine weeks of lactation, and average live weight of 50 kg ± 4 kg. The animals were distributed in latin square design (5x5) with 5 diets and 5 periods. No differences (P>0,05) were observed in the DM of the experimental diets by getting average values of 2.251,84 g dia-1 , 4,46 %PV e 118,91g kg0,75 . The DM contents of the diets were 50,55 to 55,92% by presenting a maximum variation of 10% between them. A significant difference (P<0,05) water consumption way tendered, between diets with different cactus species. The treatments cactus “Orelha de Elefante Mexicana” and Facheiro had lower water consumption compared to cactus “Palma Miúda. For milk yield no significant difference (P> 0,05) between diets formulated with cactus species, with an average of 1,90 kg/day treatments. The analysis of variance show a significant difference (P<0,05) among treatments for milk corrected to 4% fat and fat production. There was an effect (P<0,05) of the diets with different cactus on the crude protein (CP) and lactose in milk. All treatments with different cactus species can be used for dairy goats in view consumption have afforded sufficient to meet the nutritional requirements for milk nutrients, besides presenting the higher than levels of physical and chemical composition to minimum levels established by current legislation

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This research analyses the components of the organizational structure of the UFRN (Rio Grande do Norte Federal University) and to what extent they affect organizational performance. The study, classified as exploratory and descriptive, was conducted in two phases. The first phase consists of a pilot test to refine the research instrument and to identify the latent components of the organizational structure, and the second to characterize these components and thereby establish relationships with organizational performance. In the first phase, the research was conducted in 20 UFRN organizational units with the participation of 84 employees between technical-administrative and teachers, after considering missing values and outliers, while the second phase occurred in two stages: one conducted with 279 valid cases, consisting of technical-administrative and teachers of 37 UFRN units, and another with 112 managers of the institution in the 49 units identified in this research. The instrument adopted in the first phase was composed of 36 indicators of organizational structure, with six extracted and adapted from the instrument developed by Medeiros (2003) and 30 prepared based on the literature review, from Mintzberg (2012), Hall (1984), Vasconcellos and Hemsley (1997) and Seiffert and Costa (2007) and 7 performance indicators adapted from Fleury and Mills (2006), Vieira and Vieira (2003) and Kaplan and Norton (1997) from the self-assessment instrument in use by the university. In this stage the data were analyzed using the techniques of factor analysis and reliability analysis by means of Cronbach’s alpha, aiming to extract the factors representing the components of the organizational structure. In step 1 of the second phase, the instrument, refined and reduced in the previous phase, with 24 variables of organizational structure and 6 for performance was used, while in step 2, a semi-structured interview guide with questions, organized into nine organizational structure elements, was adopted aiming to gather information to understand the relationship of structure to performance of the UFRN. The techniques used in the second phase, as a whole, were factor analysis and reliability analysis to characterize the components extracted in the previous phase and to validate the performance variables and correlation analysis, regression and content analysis to establish and understand the relationship between structure and performance. The results showed, in the two stages, six latent components of organizational structure in the context under study: training and internalization, communication, hierarchy, decentralization, formalization and departmentalization - with high levels of Cronbach's alpha indexes - which can thereby be characterized as components of UFRN structure. Six performance indicators were validated in this study, showing them as efficient and highly reliable. Finally, it was found that the formalization, communication, decentralization, training and internalization components positively affect UFRN performance, while departmentalization has an adverse affect and hierarchy did not show a significant relationship. The results achieved in this work are important in future studies to support the development of a model structure that represents the specifics of the university

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Inúmeras estruturas de concreto no Brasil e no mundo estão atingindo o limite de sua vida útil projetada, completando um ciclo de cinco ou mais décadas de uso e operação. Além das estruturas mais antigas, existem ainda estruturas com reduzido tempo de serviço, e qualidade discutível, que já apresentam patologias em estado tão avançado que chegam a comprometer o seu desempenho. Vindo ao encontro dessas necessidades e no sentido de contribuir para o avanço científico e tecnológico do setor, este trabalho apresenta um método para dosagem, preparo e aplicação de argamassas de alto desempenho para recuperação de estruturas deterioradas, além de sugerir procedimentos para a realização desses reparos, fomentando a cultura das manutenções preventivas e desmistificando a complexidade atribuída a tais operações. Para tanto, foram realizados ensaios mecânicos, microestruturais e relacionados à durabilidade em corpos-de-prova moldados com sílica ativa e látex de estireno-butadieno. Os resultados indicaram que a adoção desses ingredientes, na composição da argamassa de reparo, provocou uma redução significativa da permeabilidade total e descontinuidade de poros, assim como promoveu uma melhor integridade dos constituintes da argamassa, traduzindo-se em uma ampliação, expressiva, das suas capacidades mecânicas. Quando comparada aos produtos industrializados da construção civil, com padrões similares, proporcionou uma economia da ordem de 85%, que permitiria recuperar, com os mesmos custos, quase cinco vezes mais estruturas comprometidas. Este estudo, de viés altamente tecnológico, vem oferecer à construção civil uma argamassa polimérica de alto desempenho, com função reparadora e custo mais acessível, que pode ser adotada em canteiros de obras, implementando ações de natureza sustentável e ainda atendendo às atuais exigências elencadas pela literatura, relacionadas à desempenho, vida útil e durabilidade das estruturas reparadas.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work test the relationship of performance and legal form of microfinance institutions (MFI), in our work MFI can be banks, non-governmental organizations (NGO), cooperatives, non-banks financial institutions (NBFI) or rural banks. We use linear regression model, panel data and variables dummy for the legal forms. Our samples are 243 MFI from all continents, except North America, in the period from 2007 to 2012. We found that bigger MFI generates higher profit, higher returns and higher self-sufficiency rates, so the growing can be a way for consolidation of MFI. For smaller MFI a way can be assimilation or merging with other MFI. Cooperatives, non-bank financial institutions and rural banks can serve more customers, causing greater impact on society, and get higher returns. This suggests the most appropriate legal form for microfinance market can be cooperatives, non-banks financial institutions or rural banks balancing social orientation and profit orientation.