Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Desenvolvimento de pastas cimentantes utilizando cimentos portland compostos para cimentação de poços petrolíferos

The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing

Educação tecnológica e pré-sal: necessidades e urgências

The purpose of this dissertation is whether the demand for manpower trained in technical school for the sector of Oil and Gas (O&G) is in balance with the offer of that training in the Brazilian education system. The methodology used to obtain such information was based on School Census 2000 and 2008 where data were worked out in order to clarify the numbers of enrollments in secondary technical level demanded by the sector of O&G. The demand for manpower with that qualification as a data source was the 2010-2014 Business Plan Program for Mobilization of the National Oil and Natural Gas (PROMINP). This Program identified the future demand for manpower for the Sector of the O&G until 2014 where the occupational categories are mapped prerequisite training and experience. In order to better understand the object of this study was dome a review of the literature with regard to technical education in Brazil but also the importance of the education to economic growth and the peculiarities of the oil economy in different countries possessors of those mines, or that is, developed and underdeveloped countries. Analysis showed that enrollment in technical education in Brazil had a significant increase between the dates 2000 and 2008. It also don´t bring balance with the characteristic of the dynamics of the productive sectors of the economy mainly due to heating of the economy before the global growth especially in the Construction Industry as well as in the Oil and Natural Gas Engineering and a Naval account of the discovery of oil in the Pre-Salt. Another important aspect is that one of the major problems of qualification of manpower in Brazil is due to a bad quality of the student´s school and high school which makes difficult a good performance in office work and also this ability to learn new functions. The rapprochement between the supply of the education system and the demand for manpower with training mid-level technical support for the sector O&G showed that most technical courses demanded or had no enrollment in 2008, had few enrollment in 15 states with demand expect to occur and those enrollment were unevenly distributed among states. The analysis therefore signalize the needed of a public policy that enables the adequacy of the education system (Secondary Technical Education) to Sector of O&G in terms of enrollment and its distribution between the oil producing states and in relation to technical expertise offered

Educação tecnológica e pré-sal: necessidades e urgências

O objetivo desta dissertação de mestrado é verificar se a demanda de mão-de-obra com formação no ensino médio técnico para o setor de Petróleo e Gás (P&G) está em consonância com a oferta daquela formação no sistema educacional brasileiro. A metodologia aplicada para obter tal informação foi baseada no Censo Escolar 2000 e 2008, em que os dados foram trabalhados de maneira a explicitar o número de matrículas nos cursos de nível médio técnico, demandados pelo setor de P&G. A demanda de mão-de-obra com aquela qualificação teve como fonte de dados o Plano de Negócios 2010-2014 do Programa de Mobilização da Indústria Nacional de Petróleo e Gás Natural (PROMINP). Este Programa identificou a demanda futura de mão-de-obra para o setor de P&G até 2014, onde as categorias ocupacionais mapeadas possuem pré-requisitos de formação e experiência. Com o intuito de entender melhor o objeto deste estudo foi feita uma revisão de literatura no que diz respeito ao ensino técnico no Brasil, como também a importância da educação para o crescimento econômico e as peculiaridades da economia do petróleo nos diferentes países possuidores daquelas jazidas, ou seja, países subdesenvolvidos e desenvolvidos. As análises demonstraram que as matrículas no ensino técnico no Brasil apresentaram um significativo aumento entre as datas de 2000 a 2008. Traz também como característica a desarmonia com a dinâmica dos setores produtivos da economia, devido principalmente ao aquecimento da economia antes da crise mundial de 2008, e a retomada recente do crescimento notadamente no Setor de Construção Civil, bem como no setor de Petróleo e Gás Natural e Engenharia Naval por conta da descoberta de petróleo na camada Pré-sal. Outro aspecto relevante é que um dos grandes problemas da qualificação de mão-de-obra no Brasil se deve a má qualidade do ensino fundamental e médio, que dificulta para o futuro profissional um bom desempenho nas suas funções laborais e na capacidade de aprender novas funções. A aproximação entre a oferta no sistema educacional e a demanda de mão-de-obra com a formação de nível médio técnico para o setor de P&G, demonstraram que a maioria dos cursos técnicos demandados não apresentava matrículas em 2008, ou possuíam poucas matrículas nos 15 estados com demanda prevista, e aquelas matrículas estavam mal distribuídas entre os estados. A análise aponta para a necessidade de uma política pública que possibilite a adequação do sistema educacional (Ensino Médio Técnico) ao setor de P&G, tanto no que se refere ao número de matrículas e a sua distribuição entre os estados produtores de petróleo quanto no que se refere à especialidade técnica oferecida

O Cariri cearense: da ocupação do território à institucionalização da região metropolitana do Cariri

Urbanization in their mearing simpler, the agglomeration of people, occurred from the time that the productive activities have to be based on trade. The first cities arose when the evolution of agriculture allowed the production and storage of surpluses. However, with industrialization was that urbanization becomes intense, according to Singer (1987), the industrial revolution was to stage, from the beginning, the urban area. It requires, in its proximity, the presence of a large number of workers. With respect to the Cariri cearense, the occupation of its territory is associated with the movement of agricultural surpluses produced and reproduced under the hegemony of merchant capital and due to the development of extensive cattle that promoted the territorial occupation of Ceará. From the 1960s, the region has undergone changes in its productive structure due to industrial planning policies of the government of Ceará. However it was in the 1990s that the region itself as economic and urban polo because policies to attract investments from the state government of Ceará. This policy led to boosting trade and services marking the predominance of tertiary activities in the region, especially the retail, wholesale , medical services and education. Investments also consolidated the industrial park area making it diverse, especially the footwear industries, mining, non-metallic minerals, transport equipment, pharmaceutical chemical, food and beverages, rubber and leather and construction. Thus, the aim of this study was to review the region of Cariri cearense occupation of its territory institutionalizing its metropolitan region, to understand what factors influenced the Cariri cearense become an important area in urban and economic terms in the interior of Ceará. In order to develop this research in that refers to the methodological perspective, research is guided by bibliographic studies and also makes use of secondary data analysis (population, GDP, urbanization rate, employment) of the main databases the country, as IBGE, IPEADATA and RAIS - MTE

Avaliação do concreto de cimento portland com resíduo da produção de scheelita em substituição ao agregado miúdo

From the 70`s, with the publication of the Manifesto for Environment UN Conference, held in Stockholm, in Sweden (1972), defend and improve the environment became part of our daily lives. Thus, several studies have emerged in several segments in order to reuse the waste. Some examples of waste incorporated in portland cement concrete are: rice husk ash, bagasse ash of cane sugar, powder-stone, microsilica, tire rubber, among others. This research used the residue of the mining industry Scheelite, to evaluate the incorporation of the residue composition of Portland cement concrete, replacing the natural sand. The percentage of residue were incorporated from 0% to 100%, with a variation of 10%, 11 being produced concrete mix in the ratio 1:2:3:0.60, by mass. We evaluated the following characteristics of concrete: slump test, compressive strength, tensile strength by diametral compression, water absorption, porosity and density, based on the ABNT, through tests performed in the Laboratory of Civil Construction, UFRN. The trace with the addition of 60% scheelite residue was obtained which better performance. Therefore, the use of the waste from the production of Scheelite is feasible due to the durability parameters (water absorption and porosity), sustainability, and the good results of the resistance of the concrete

Estudo da viabilidade da utilização de cinza de lodo de esgoto como adição em argamassa de cimento Portland

The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied

Qualidade em obras públicas: um estudo comparativo entre as metodologias Seis Sigma, ISO 9000 e PBQP-H no RN

In Brazil the theme quality in public construction has been widely discussed in the early 1990s, with the creation of the Brazilian Program of Quality and Productivity for the Habitat (PBQP-H) which is strongly influenced by the wave of studies on issues of quality in the world, such as the ISO 9000. Over the years, other approaches have emerged and been consolidated, evolving from market and customer´s needs. An example is the Six Sigma methodology. This study aims to examine the Six Sigma, ISO 9000 and PBQP-H methodologies, noting the common elements, differences, gaps and how the methods are complementary, so that with the ongoing work, proposed initiatives can be developed to improve the quality that enables its application in public construction. Still aiming to optimize the deployment of the proposed initiatives, it was performed an analysis of ISO 9001 and PBPQ-H certifications in Brazil and in the state of Rio Grande do Norte, with respect to the construction industry and a case study to identify the factors that influence the adoption of initiatives to improve quality, and check if the selected construction company is prepared to implement the proposed initiatives. This research is characterized as exploratory and applied, with literature review and a case study. The data collection instrument was a questionnaire and the statistical analysis used a multidimensional scaling method. The conclusion is that the methodologies are compatible and complementary, and their integration could potentialize the goals set. It was identified that the state of Rio Grande do Norte has a few number of certifications in construction. Nine initiatives are proposed for implementation at construction companies. In the case study it was found that the studied company would be able to implement the suggestions proposed and the requirement for certification by clients and funding institutions influence the adoption of quality improvement initiatives. This result confirms the literature which states that top management support is crucial for the successful implementation of quality methodologies

Gestão dos resíduos sólidos das contruções prediais na cidade do Natal-RN

The present work has the objective of presenting an investigation about the quantification, classification and destination of the waste of construction and demolition (RCD) in the city of Natal - RN, focusing the aspects of the environmental impacts and the strategic importance of the environmental administration in the earnings of productivity of the companies. Of the environmental point of view the research intends to identify and to quantify the monthly and annual production of RCD in the city, as well as to know the places of deposition of those residues. To reach the objectives of the study, an exploratory and descriptive research was accomplished, using a questionnaire with closed subjects and an open one, applied in 25 entrepreneurs of the branch of the building site, being 21 builders and 4 entrepreneurs of collection companies and removal dumps. As form of analysis of the data, the descriptive analysis was used and of crossing. The production engineering considers important the insert of best production practices and administration of the product in the companies, with views to the increase of your competitiveness, productivity earnings and improvement of the environmental aspects with views to the consumer's satisfaction, in that case the buyer of immobile. The principal results of the investigation demonstrate that there was not great variability of answers with relationship to the interviewees opinion in what he refers to the environmental practices. In your majority the building site interviewees entrepreneurs evidenced the absence of the public power, particularly the city hall of Natal, in the control, fiscalization and creation of mechanisms for a correct destination of RCD, as well as for your reuse and recycle. On the other hand also it was evident that the recycle or the reuse of RCD on the part of the companies is a rare practice and a lot of times inexistent, although the entrepreneurs' of the building site section great majority recognizes that would have won of productivity with the correct and intensive use of such measures

Desenvolvimento de metodologia para avaliação de desempenho ambiental em edifícios adaptada à realidade do Nordeste brasileiro

This research refers to the production of green buildings, defined, mainly, based on the use of sources of alternative energies, smaller emission of pollutant, use of recyclable materials, systems of recycling of the waters, maximization of the natural illumination, preservation of green areas or native, and appropriate quality of the internal air. From the conception of those buildings, it appears the needs of evaluating them, creating the methodologies for the evaluation of environmental performance of buildings. In that way, this work can be divided in two moments: the first one when it identifies the methodologies for the evaluation of environmental performance for buildings existents in the literature, defining their categories, criteria and sub-criteria to be appropriate to the reality of the Brazilian Northeast; and the second one when starting from the analysis of the systems of existent evaluation. It defines a methodological base and it generates a new evaluation system, denominated MEDACNE (Methodology of Evaluation of Environmental Acting for Construction in the Northeast). In that moment, the process of framing of the section of the building site is verified under the maintainable optics, stimulated mainly by the pressures of the society - conferences, protocols and agreements. Finally, the proposed methodology was applied in a case study, a residential building, called Maria José Gurgel , located in Natal-RN, Brazil, for its validation. This methodological proposition should increase the patterns environmental places for the production of new buildings, and it will be a reference guide for architects, engineers and planners to develop their constructions considering the criteria of the sustainability. This study made use of bibliographical research in books and specialized magazines and the analysis of the data was realized in an interpretative way

Utilização de resíduos de rochas ornamentais na produção de cerâmica branca

The marble and granite waste come from the process of mining of those ornamental rocks for use in the building industry. Brazil is one of the largest producers of blocks or finished products of ornamental rocks, extracting about 5.2 tons / year. The largest national producers are the states of Espírito Santo, Minas Gerais and Bahia which account for 80% of the Brazilian production. However, the waste total amount during processing of these blocks reaches 40% of the total. The use of the waste produced by this industry in white ceramics could be a form of disposition, because these materials, are thrownasa mud directly at decantation ponds, wastelands or in rivers, without any treatment. The present work has as main purpose to study the influence that reject of the ornamental rocks on the physical and mechanical properties of white ceramics. X-Ray characterizations of raw materials by were performed X-Ray fluorescence, X-Ray diffraction, granulometric, thermogravimetric and thermodiferencial analysis, five formulations were made (0, 10, 20, 30, 40% in granite weight) wich were burned at three temperatures: 1100°C, 1150°C and 1200ºC with 60 minutes of sorling time. After sintering, the samples were submitted to different analyser absorption of water, linear retraction, apparent porosity, apparent specific mass, flexival stronght, and scanning were obtained microscopy. Compatible technological properties within the limits demanded for the production of porcelainized stoneware

Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Estudo do efeito do óxido de bário no comportamento de massas para porcelanato

In this work, it is proposed the study of the effect of barium oxide acting as synthetic flow in the behavior of masses for stoneware from the use of raw materials found in the deposits of minerals of the Rio Grande do Norte that it makes use of a great natural potential for the industrialization of the product. The porcelanato is a sophisticated product with excellent final properties being applied as ceramic coating in buildings of high standard of engineering. The raw materials selected for the development of the study had been two types of argilas, two types of feldspatos, dolomita, talco, barium carbonate and silica, being characterized by X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis and thermal analysis. Thus, it is intended to define four formulations using the cited raw materials that will be processed, conformed and sintered in the temperatures of 1150 °C, 1175 °C, 1200 °C, 1225 °C e 1250 °C. From the physical characterizations, chemical and morphologic of the formed formulations, the effect of barium oxide is determined in the physical and mechanical properties of the studied system carrying water absorption tests, linear retraction, apparent porosity, apparent specific mass, compacting curve, flexural strength and microstructural analysis by XRD and SEM. After analyzing the results, indicated that barium oxide acts as a flux of high temperature and as the ordering of structure, where the embedded glass phase has the nucleating effect phase potassium silico-aluminum reacting with free silica which together with the high content of potassium concentrated form a new crystalline phase called microcline. The masses studied with the addition of barium oxide present physical-mechanical properties highly satisfactory in reduced firing temperatures, which implies a saving in energy given off in the production and increased productivity

Estudo do aproveitamento de resíduo de gesso como carga para compósito com matriz de resina expansiva de mamona

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Efeito da adição de diatomita no comportamento reológico e mecânico de argamassas colantes

The mortar is a type of adhesive products used in large scale in construction, it is a function of its variety and ease of application . Although industrialized product and endowed with technology in its production is very frequent occurrence of the same pathology , which causes frequent damage and losses in the construction industry. Faced with this real market situation , the technical and scientific study of the effects of the addition of diatomite on the rheological and mechanical behavior of adhesive mortars are needed. This work back as a suggestion the use of diatomite as a mineral additive in formulations of adhesive mortars for partial replacement of cellulose based additives . The choice of using this mineral occurs through physical, chemical and rheological properties that justify its use in this product line , and is a raw material abundant in our region and can thus contribute positively to the minimization of direct costs cellulose -based additives . Industrial adhesive mortar used for comparison , was type AC1 . Formulations of adhesive mortar with diatomite held constant dosed quantities of sand, cement and the water / cement (w / c ) , or adhesive mortar formulations were developed with levels 10, 20, 30 and 40% of diatomite substituting part of the cellulose -based additives . These mortars were subjected to the following tests that define and evaluate the rheological and mechanical behavior of this type of mortar. The results attest the best performance of the adhesive mortar type AC1 with partial replacement of 30 % of the cellulose-based additive for diatomite