Estudos de validade da escala de dependência alcoólica do millon clinical multiaxial inventory iii para o Brasil

This study has as main objectives to translate and to adapt the MCMI-III to brazilian Portuguese, as well as investigate and analyze the involved modifications in the Alcohol Dependence Scale concerning to the results obtained on the validity and on the process of adaptation to Brazil. The inventory was translated and, posteriorly, applied on people with different reading levels to certify that the items are understandable to public in general, from diverse places of the country, divided into clinical and non-clinical groups. Were evaluated 2855 subjects between the ages of 18 and 85 years old, male and female, resident and dwellers of Brazilian cities. The application methods were face-to-face and computerized. Results showed that the clinical group presented significant differences between the means in comparison to the non-clinical group. Through the application of the General Health Questionnaire were developed studies related to the achievement of convergent validity and its results pointed to the relation between the instrument scores and the MCMI-III. The Alcohol Dependence Scale analysis indicated that people who reported abusive use of alcohol had highest scores, indicating adequacy of the instrument on identifying manifestation of disorders and syndromes. Nevertheless, further studies are necessary to the establishment of normative patterns to the Brazilian sample

Obtenção e aplicação de sistemas microemulsionados na recuperação avançada de petróleo

Due to the need of increasing production in reservoirs that are going through production decline, methods of advanced recovery have frequently been used in the last years, as the use of conventional methods has not been successful in solving the problem of oil drifting. In this work, the efficiency of different microemulsionated systems in the flow of oil from cores from Assu and Botucatu formations. Regarding drifting tests, cores were calcinated at a temperature of 1000°C, for 18 hours, with the aim of eliminating any organic compound present in it, increasing the resultant permeability. Following, the cores were isolated with resin, resulting in test specimens with the following dimensions: 3.8 cm of diameter and 8.7 cm of length. Cores were saturated with brine, composed of aqueous 2 wt % KCl, and oil from Guamaré treatment station (Petrobras/RN). A pressure of 20 psi was used in all tests. After core saturation, brine was injected again, followed by oil at constant flow rate. The system S3 - surfactant (anionic surfactant of short chain), isoamillic alcohol, pine oil, and water - presented the best drift efficiency, 81.18%, while the system S1E commercial surfactant, ethyl alcohol, pine oil, and distilled water presented low drift efficiency, 44,68%

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Utilização de microemulsão na remoção da cor de efluentes têxteis contendo corantes dispersos

Polyester fibers are the most used fibers in the world and disperse dyes are used for dyeing these fibers. After dyeing, the colorful dyebath is discharged into effluent streams, which needs a special treatment for color removal. Surfactants interaction with dyes has been evaluated in several studies, including the textile area, specifically in the separation of dyes from textile wastewater. In this work a cationic surfactant was used in a microemulsion system for the extraction of anionic dyes (disperses dyes) from textile wastewater. These microemulsion system was composed by dodecylamonium chloride (surfactant), kerosene oil (organic phase), isoamyl alcohol (cosurfactant) and the wastewater (aqueous phase). The wastewater that results after the dyeing process is acid (pH 5). It was observed that changing the pH value to above 12.8 the extraction could be made, resulting in an aqueous phase with low color level. The Scheffé net experimental design was used for the extraction process optimization, and the obtained results were evaluated using the program "Statistica 7.0". The optimal microemulsion system was composed by 59.8wt.% of wastewater, 30.1wt.% of kerosene, 3.37wt.% of surfactant and 6.73wt.% of cosurfactant, providing extraction upper than 96%. A mix of reactive dyebath (50%) and disperse dyebath (50%) was used as aqueous phase and it presented extraction upper than 98%. The water phase after extraction process can be reused in a new dyeing, being obtained satisfactory results, according to the limits established by textile industry for a good dyeing. Tests were accomplished seeking to study the influence of salt addition and temperature. An experimental design was used for this purpose, which showed that the extraction doesn't depend on those factors. In this way, the removal of color from textile wastewater by microemulsion is a viable technique (that does not depend of external factors such as salinity and temperature), being obtained good extraction results even with in wastewater mixtures

Estudo do óleo das sementes de Carthamus tinctorius L. Para produção de biodiesel

Most of the energy consumed worldwide comes from oil, coal and natural gas. These sources are limited and estimated to be exhausted in the future, therefore, the search for alternative sources of energy is paramount. Currently, there is considerable interest in making trade sustainable biodiesel, a fuel alternative to fossil fuels, due to its renewable nature and environmental benefits of its use in large scale. This trend has led the Brazilian government to establish a program (Probiodiesel) with the aim of introducing biodiesel into the national energy matrix, by addition of 5% biodiesel to conventional diesel in 2010 to foster not only the increase of renewable energy, but reduce imports of crude oil. This work evaluates different methods of extraction of oil Carthamus tinctorius L., their characterization by IR, 1H and 13C NMR, HPLC and TG and their use in the production of methyl ester (molar ratio of oil / alcohol 1:6, and NaOH catalyst). The physico-chemical parameters (acid value, density, viscosity, saponification index and surface tension) of oil and biodiesel were also described. The produced biodiesel had a yield of 93.65%, was characterized in relation to their physicochemical properties showing satisfactory results (density=875 kg/m3, viscosity = 6.22 mm2/s, AI = 0.01 mg (NaOH) /g) compared with the values established by the the National Agency Oil, Natural Gas and Biofuels

Tratamento de borra de petróleo com sistemas microemulsionados

During the storage of oil, sludge is formed in the bottoms of tanks, due to decantation, since the sludge is composed of a large quantity of oil (heavy petroleum fractions), water and solids. The oil sludge is a complex viscous mixture which is considered as a hazardous waste. It is then necessary to develop methods and technologies that optimize the cleaning process, oil extraction and applications in industry. Therefore, this study aimed to determine the composition of the oil sludge, to obtain and characterize microemulsion systems (MES), and to study their applications in the treatment of sludge. In this context, the Soxhlet extraction of crude oil sludge and aged sludge was carried out, and allowing to quantify the oil (43.9 % and 84.7 % - 13 ºAPI), water (38.7 % and 9.15 %) and solid (17.3 % and 6.15 %) contents, respectively. The residues were characterized using the techniques of X-ray fluorescence (XRF), Xray diffraction (XRD) and transmission Infrared (FT-IR). The XRF technique determined the presence of iron and sulfur in higher proportions, confirming by XRD the presence of the following minerals: Pyrite (FeS2), Pyrrhotite (FeS) and Magnetite (Fe3O4). The FT-IR showed the presence of heavy oil fractions. In parallel, twelve MES were prepared, combining the following constituents: two nonionic surfactants (Unitol L90 and Renex 110 - S), three cosurfactants (butanol, sec-butanol and isoamyl alcohol - C), three aqueous phase (tap water - ADT, acidic solution 6 % HCl, and saline solution - 3.5 % NaCl - AP) and an oil phase (kerosene - OP). From the obtained systems, a common point was chosen belonging to the microemulsion region (25 % [C+S] 5 % OP and AP 70 %), which was characterized at room temperature (25°C) by viscosity (Haake Rheometer Mars), particle diameter (Zeta Plus) and thermal stability. Mixtures with this composition were applied to oil sludge solubilization under agitation at a ratio of 1:4, by varying time and temperature. The efficiencies of solubilization were obtained excluding the solids, which ranged between 73.5 % and 95 %. Thus, two particular systems were selected for use in storage tanks, with efficiencies of oil sludge solubilization over 90 %, which proved the effectiveness of the MES. The factorial design delimited within the domain showed how the MES constituents affect the solubilization of aged oil sludge, as predictive models. The MES A was chosen as the best system, which solubilized a high amount of aged crude oil sludge (~ 151.7 g / L per MES)

Influência da densidade de carga e da massa molar da poliacrilamida na reologia de sistemas microemulsionados

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

Estudo da influência do biodiesel de mamona como aditivo antioxidante para o biodiesel de girassol e soja

Biodiesel is a fuel made up by mono-alkyl-esters of long chain fatty acids, derived from vegetable oils or animal fat. This fuel can be used in compression ignition engines for automotive propulsion or energy generation, as a partial or total substitute of fossil diesel fuel. Biodiesel can be processed from different mechanisms. Transesterification is the most common process for obtaining biodiesel, in which an ester compound reacts with an alcohol to form a new ester and a new alcohol. These reactions are normally catalyzed by the addition of an acid or a base. Initially sunflower, castor and soybean oil physicochemical properties are determined according to standard test methods, to evaluate if they had favorable conditions for use as raw material in the transesterification reaction. Sunflower, castor and soybean biodiesel were obtained by the methylic transesterification route in the presence of KOH and presented a yield above 93% m/m. The sunflower/castor and soybean/castor blends were studied with the aim of evaluating the thermal and oxidative stability of the biofuels. The biodiesel and blends were characterized by acid value, iodine value, density, flash point, sulfur content, and content of methanol and esters by gas chromatography (GC). Also studies of thermal and oxidative stability by Thermogravimetry (TG), Differential Scanning Calorimetry High Pressure (P-DSC) and dynamic method exothermic and Rancimat were carried out. Biodiesel sunflower and soybean are presented according to the specifications established by the Resolution ANP no 7/2008. Biodiesel from castor oil, as expected, showed a high density and kinematic viscosity. For the blends studied, the concentration of castor biodiesel to increased the density, kinematic viscosity and flash point. The addition of castor biodiesel as antioxidant in sunflower and soybean biodiesels is promising, for a significant improvement in resistance to autoxidation and therefore on its oxidative stability. The blends showed that compliance with the requirements of the ANP have been included in the range of 20-40%. This form may be used as a partial substitute of fossil diesel

Prevalência e fatores associados à testagem para HIV em homens que fazem sexo com homens

A infecção por HIV/Aids (vírus da imunodeficiência humana/síndrome da imunodeficiência adquirida) constitui um importante problema mundial de Saúde Pública. Dados do último boletim apresentado pela UNAIDS (Organização das Nações Unidas para Aids) em 2013, apontam que mais de 35 milhões de pessoas vivem com HIV em todo mundo. No Brasil, a epidemia é concentrada, com prevalência de infecção menor que 1% na população de 15 a 49 anos, porém chegando a 10,5% entre homens que fazem sexo com homens (HSH). O diagnóstico precoce do HIV se associa a uma redução da morbidade, mortalidade e também da transmissão desta infecção. O presente estudo tem o objetivo de avaliar a prevalência e fatores associados à testagem prévia para HIV na população de HSH dos municípios de Natal/RN e Parnamirim/RN. Os participantes respondiam a um questionário contendo perguntas referentes a dados sociodemográficos, padrões de relacionamento sexual, conhecimentos sobre HIV/Aids, uso de preservativo, consumo de álcool, drogas e busca de testagem para HIV e sífilis. Em seguida, os que desejassem poderiam realizar teste rápido para HIV e sífilis. No total, foram pesquisados 101 sujeitos, destes, 70 foram recrutados com a utilização da técnica Respondent Driving Sample, e 31 com uma amostra de conveniência. O teste de HIV havia sido realizado por 63,3% dos homens pelo menos uma vez na vida. A testagem prévia para HIV foi associada à idade (27 anos ou mais), realização prévia do teste para sífilis, conhecimento sobre locais onde o teste de HIV é feito gratuitamente e resultado positivo para sífilis no momento da pesquisa. A prevalência de testagem para HIV na amostra foi baixa, semelhante ao verificado em outros estudos com a população HSH. Ações que priorizem a divulgação de locais onde o anti-HIV pode ser realizado gratuitamente e direcionadas para o público jovem parecem ser as mais adequadas para a ampliação da testagem entre os HSH na nossa realidade

O uso da informação contábil no setor sucroalcooleiro: um estudo nas indústrias de Alagoas

This study has the purpose of discussion and reflection of how the accounting information in the managemental area are used by the sugar & alcohol industry, located at State of Alagoas, aiming to identify if them please their managers expectations in the process of taking decision. Ahead of an existent universe of 27 (twenty seven) companies registered at the Sugar & Alcohol Labor Union of State of Alagoas SINDAÇUCAR files, were collected 14 (fourteen) questionnaires to support the current research classified as explorative and descriptive. The junction of these two kinds of research resulted in a quantitative and perceptive analysis of the use of the accounting information in the process of taking decision of the Sugar & Alcohol industry in Alagoas. The results demonstrated in this research indicate that, although the managers consider relevant the information at cost area, they do not use them in the process of taking decision. The reports emitted by accountancy are only financial, such as balance sheets, income statement, financial flow, among others factors. The importance order that the managers give to the accounting information and the kind of information that they use in the process of taking decision do not indicates that they use the accountancy in administration level. The statistics analysis of the files collected allows infer that the information provided by accountancy are considered important, however are few used at the manager process

Síntese e caracterização estrutural e magnética da ferrita de cálcio

The calcium ferrite (Ca2Fe2O5) has a perovskite-type structure with oxygen deficiency and is used as a chemical catalyst. With the advent of nanoscience and nanotechnology, methods of preparation, physical and chemical characterizations, and the technological applications of nanoparticles have attracted great scientific interest. Calcium nanostructured ferrites were produced via high-energy milling, with subsequent heat treatment. The milling products were characterized by X-ray diffraction, magnetization and Mössbauer spectroscopy. Samples of the type Ca2Fe2O5 were obtained from the CaCO3 and Fe2O3 powder precursors, which were mixed stoichiometrically and milled for 10h and thermally treated at 700ºC, 900ºC and 1100ºC. The Mössbauer spectra of the treated samples were adjusted three subespectros: calcium ferrite (octahedral and tetrahedral sites) and a paramagnetic component, related to very small particles of calcium ferrite, which are in a superparamagnetic state. For samples beats in an atmosphere of methyl alcohol, there is a significant increase in area associated with the paramagnetic component. Hysteresis curves obtained are characteristic of a weak ferromagnetic-like material

A reprodução do espaço da pequena produção rural familiar em Canguaretama/RN

This study aimed to explore the process of reproduction of space from the small family farm production in the municipality of Canguaretama, specifically focused on foodstuffs of plant origin, seeking to understand the changes in agrarian space canguaretamense and its impact on small family farms the last 35 years. Since colonization, during the seventeenth century, the production of space agrarian Canguaretama was founded under a structure based on large ownership and cultivation of cane sugar. Secondly, it was being built a small space reserved for food production to meet both the consumption of property, but also for local marketing. In the centuries following the changes in the capitalist system imposed a new dynamic for small food production, mostly in the early twentieth century, with processing plants and mills in the area extending toward the cultivation of sugarcane. In the second half of that century, mainly in the 1980s, the cultivation of cane sugar was encouraged to produce alcohol, which led to a further expansion of sugar cane toward the areas targeted for the production of foodstuffs. Currently, the framework of small food production differs little from the period of colonization in relation to the difficulties faced by this segment of agriculture. Thus, we have a reality based on socio-spatial inequality, and the near absence of the Government, which requires urgent implementation of public policies for the production and organization of small producers into associations or cooperatives to improve the productivity and hence in their standards of living and their families