Tecnologia eletroquímica como tratamento alternativo de efluentes têxteis sintéticos utilizando ânodos de platina e diamante

In this work, the treatment of synthetic wastewaters containing Remazol Red BR (RRB) and Novacron Blue C-D (NB) by anodic oxidation using boron doped diamond anodes (BDD) and Novacron Yellow (YN) using BDD and Platinum (Pt) anodes was investigated. Galvanostatic electrolyses of RRB and NB synthetic wastewaters have led to the complete decolorization removal at different operating conditions (current density, pH and temperature). The influence of these parameters was investigated in order to find the best conditions for dyestuff colour removal. According to the experimental results obtained, the electrochemical oxidation process is suitable for decolorizing wastewaters containing these textile dyes, due to the electrocatalytic properties of BDD and Pt anode. Energy requirements for removing colour during galvanostatic electrolyses of RRB, NB and YN synthetic solutions depends mainly on the operating conditions; for example for RRB, it passes from 3.30 kWh m-3 at 20 mA cm-2 to 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH = 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (data estimated per volume of treated effluent). In order to verify the Brazilian law regulations of NB and RRB synthetic solutions after electrochemical decolourisation treatment, Hazen Units values were determined and the total colour removal was achieved; remaining into the regulations. Finally, electrical energy cost for removing colour was estimated

Aplicação da tecnologia eletroquímica como alternativa para a remoção de corante têxteis em efluentes sintéticos e reais utilizando anodos de platina e diamante

In this work, electrochemical technology was used to treat synthetic wastewater containing Methyl Red (MR) and Blue Novacron (BN) by anodic oxidation using anodes platinum (Pt) and real samples of textile effluents using DDB anodes and platinum (Pt). The removal of color from the galvanostatic electrolysis of synthetic wastewater MR and BN, and the actual sample has been observed under different conditions (different current densities and temperature variation). The investigation of these parameters was performed in order to establish the best conditions for removal of color and chemical oxygen demand (BOD). According to the results obtained in this study, the electrochemical oxidation processes suitable for the degradation process of color and COD in wastewater containing such textile dyes, because the electrocatalytic properties of Pt and BDD anodes consumption energy during the electrochemical oxidation of synthetic solutions AN and MR and real sample, mainly depend on the operating parameters of operation, for example, the synthetic sample of MR, energy consumption rose from 42,00kWhm-3 in 40 mAcm-2 and 25 C to 17,50 kWhm-3 in 40mAcm-2 and 40 C, from the BN went 17,83 kWhm-3 in 40mAcm and 40°C to 14,04 kWhm- 3 in 40mAcm-2 and 40 C (data estimated by the volume of treated effluent). These results clearly indicate the applicability of electrochemical treatment for removing dyes from synthetic solutions and real industrial effluents

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

Uma abordagem para promover o alinhamento entre a estratégia de negócio e a tecnologia de informação

Currently with the increase in complexity in doing business, organizations are seeking information systems that help to quickly respond to new demands in the processes of production of products and services. An information system is no longer just a support tool and has become an integral part of doing business. However, in spite of significant technological evolution in recent years, information systems that support business do not respond efficiently to the constant alterations that occur in many organizations. One of the main problems faced by information systems currently is the lack of strategic alignment between business strategy and information technology. The concept of strategic alignment can be defined as a way between business strategies and objectives and the strategies, objectives and functions of information technology in such as way as to contribute to the increase in competitivity of the organization over time. Strategic alignment together with strategic planning are important management instruments. Approaches for operationalizing this alignment are being developed currently but are still in their initial stages due to the fact that it is a relatively new concept in the literature. Another point that needs to be taken into consideration during the strategic alignment is the question of trackability between the business elements and IT. Trackability (Tracking) is necessary for example when one wishes to know exactly which goal defined in the business strategy was left out or not accepted due to a modification made in the IT strategy. Very few proposals present concrete ways supported by software systems in order to obtain strategic alignement while taking into consideration this trackability. Therefore the objective of this work is to propose the creation of a strategic alignment process supported by a software system which is capable of permitting trackability between the organizational objectives and the business processes based on formalization standards defined through a model oriented approach

Tecnologia educacional no contexto do ensino de histologia: pesquisa e desenvolvimento de um ambiente virtual de ensino e aprendizagem

Discutem-se as mudanças constatadas no ensino da Histologia, como a tecnologia tem sido empregada nos contextos de aprendizagem, os aspectos pedagógicos inerentes à utilização de recursos, tais como atlas digitais e microscópios virtuais, e apresenta-se pesquisa sobre o desenvolvimento de um ambiente virtual de ensino-aprendizagem de Histologia, que contou com a participação de alunos e professores em sua construção. Verificou-se que os ambientes virtuais e outros recursos didáticos baseados nas Tecnologias da Informação e da Comunicação (TICs) procuram atender à atual tendência de complementar a educação presencial com ferramentas de educação a distância, que podem ser utilizadas facultativamente no estudo extraclasse continuado. Concluiu-se que, embora as novas tecnologias possam contribuir para o ensino de Histologia, os materiais didáticos baseados em TICs devem se adequar às expectativas docentes e discentes e aos aspectos pedagógicos e ergonômicos, e precisam ser adotados pelos professores não como ferramentas isoladas, mas integrados às estratégias de ensino- -aprendizagem

As múltiplas faces da evasão na educação superior a distância: a experiência do curso de tecnologia em gestão ambiental do IFRN em dois pólos de apoio presencial

This research presents a reflection on the dropout rates in higher education courses available through distance education in a context marked by deep changes in various spheres of society and by the uncontrolled growth of this educational method. For this, the object of analysis is related to the reality of students of Technology in Environmental Management offered by the Instituto Federal de Educação, Ciência e Tecnologia, Rio Grande do Norte (RN), Brazil, through the distance education in presence support poles located in Mossoró (RN) and Martins (RN). In this field research development several strategies of data collection are used, such as participant observation of reality; analysis of documents related to distance education and to the classes in Technology in Environmental Management; questionnaires answered by students who dropped the course. The results of such research enable us to say that the dropout rates in distance higher education is mainly referred to the consequences of a combination of aspects involved in the course development, personal difficulties faced by students during the period they attend the lessons and elements inherent in the context in which the course and students are inserted. Nevertheless there are specific situations in which the student may drop the program due to the influence of a single aspect, whether it is inherent in the development of the course, a personal situation, or even a factor determined by the context in which the course or the student belongs to

O papel da tecnologia cênica e seus desdobramentos para uma economia da produção cultural no nordeste

O papel da tecnologia na produção contemporânea em artes cênicas vem influenciando profundamente as formas de recepção e produção de Teatro, Dança, espetáculos de Circo, shows musicais, entre outras manifestações espetaculares organizadas. Sua aplicação se estende amplamente a outras áreas que necessitam enfatizar o caráter cênico de seus processos de fruição como é o caso dos museus, feiras de ciências, exibições e mostras em artes visuais e o aparato tecnológico de luz, som e configuração espacial usados para estes fins. Neste sentido, o desenvolvimento deste tipo de tecnologia vem gerando e alimentando cadeias produtivas que movimentam uma economia da produção cultural e criam uma rede de relações articuladas em diferentes níveis de atuação, envolvendo produtores de equipamento, fornecedores, lighting designers, cenógrafos, profissionais de sonorização, arquitetos, técnicos de montagem e operação, instituições ensino especializadas, associações de área, entre outros. O foco deste trabalho se concentra em demonstrar como a análise de demandas de tecnologia cênica articuladas pelos sistemas de produção cultural, em particular na região Nordeste do Brasil, possibilitam compreender modelos de organização em curso, contribuindo para o desenvolvimento de uma reflexão multidisciplinar acerca dos processos de produção artística de natureza cênica e como esta produção é afetada pelos limites e possibilidades dos aspectos que caracterizam uma economia destas produções

Educação física e televisão: reflexões sobre sensibilidade, tecnologia e conhecimento

Este estudo parte do princípio de que o conhecimento da Educação Física é, eminentemente, vivencial e reconhece que a tecnologia da informação, especifi camente a comunicação de massa, é capaz de transmitir informação para um grande público, modifi cando a vivência das práticas corporais tematizadas pela Educação Física. Nesse sentido, esta pesquisa objetiva analisar como o aparato tecnológico, em especial a televisão, interfere na apropriação do conhecimento na Educação Física, com base na refl exão sobre o esporte. Assim, utilizamos o olhar estético sobre o telespetáculo esportivo e a análise de conteúdo para trabalhar com discursos de profi ssionais. Além disso, apontamos para a revisão de alguns conceitos pertinentes à área, tais como corpo, sensibilidade e conhecimento

Desenvolvendo e gerenciando compostagem de resíduos sólidos urbanos: para geração de renda e repasse de tecnologia à acrevi

Nowadays, as well as in the past decades, the dumping of biodegradable organic waste in landfill is common practice in Brazil, as well as in most parts of the world. Nevertheless due to its rapid decomposition and release of odors, this practice hamper’s the operation and implementation of a recycling system. These facts encouraged our research to find an efficient system for the management of organic waste, not only for the use of official workers responsible for managing these wastes, but also for non-governmental institutions. The Recycling for Life Community Association – ACREVI (Associação Comunitária Reciclando para a Vida), together with the municipal authorities of Mossoró-RN, Brazil, have assumed the social role of collecting and recycling solid waste produced by most of the local population. However, it was observed that the organic waste it collected was not receiving any treatment. This present work aims to make compost with mixed waste (green waste and organic household), and then do chemical analysis of the material in view to use the waste as organic fertilizer. The objective being: to share the knowledge acquired by putting it into a very simple language accessible to people with little education. The experiment was conducted at ACREVI, Mossoró (RN), and the compost was obtained following the method "windrow", forming three cells (I, II, III) with conical shape, dimensions of 1.6 meters and 2.0 meters in diameter for cells I and II, and 1.0 meters high and 2.0 meters in diameter for cell III. The process was accompanied by analysis: CHN elemental, a variation of cell temperature, humidity, pH, TKN, bulk density, nutrients and heavy metals. Stabilized organic compounds reached the C/N ratio of 10.4/1 cell I and 10.4/1 in the cell II in the cell, showing how good soil conditions, with potential to improve the physical properties of any soil and pH acid soils, has presented the cell III at the end of the process the C/N 26/1, is a high ratio may be associated with the stack size III, thus changing the optimal conditions for the occurrence of the process. The levels of heavy metals in the analyzed compounds were lower than those established by the SDA normative instruction, Nº 27, of 5 June, 2006. The use of pruning trees and grass are used in small-scale composting, while generating a quality compost in the final process, it also created an important condition for a correct sizing of the composting piles. Under the studied conditions it is not advisable to use cells with a height of 1.00 m in height and 2.00 m in diameter, as these do not prevent the rapid dissipation of heat and thus can not be a good product at the end of composting. The composting process in the shed of the association and the preparation of the primer enabled the development of an alternative technology to generate income for members of ACREVI.