Um sistema para simular o comportamento de bancos trifásicos de reguladores de tensão usados em sistemas de distribuição de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Simulador computacional do comportamento em regime de poços de petróleo equipados com gas-lift contínuo

Amongst the results of the AutPoc Project - Automation of Wells, established between UFRN and Petrobras with the support of the CNPq, FINEP, CTPETRO, FUNPEC, was developed a simulator for equipped wells of oil with the method of rise for continuous gas-lift. The gas-lift is a method of rise sufficiently used in production offshore (sea production), and its basic concept is to inject gas in the deep one of the producing well of oil transform it less dense in order to facilitate its displacement since the reservoir until the surface. Based in the use of tables and equations that condense the biggest number of information on characteristics of the reservoir, the well and the valves of gas injection, it is allowed, through successive interpolations, to simulate representative curves of the physical behavior of the existing characteristic variable. With a simulator that approaches a computer of real the physical conditions of an oil well is possible to analyze peculiar behaviors with very bigger speeds, since the constants of time of the system in question well are raised e, moreover, to optimize costs with assays in field. The simulator presents great versatility, with prominance the analysis of the influence of parameters, as the static pressure, relation gas-liquid, pressure in the head of the well, BSW (Relation Basic Sediments and Water) in curves of request in deep of the well and the attainment of the curve of performance of the well where it can be simulated rules of control and otimization. In moving the rules of control, the simulator allows the use in two ways of simulation: the application of the control saw software simulated enclosed in the proper simulator, as well as the use of external controllers. This implies that the simulator can be used as tool of validation of control algorithms. Through the potentialities above cited, of course one another powerful application for the simulator appears: the didactic use of the tool. It will be possible to use it in formation courses and recycling of engineers

Estudo do efeito do óxido de bário no comportamento de massas para porcelanato

In this work, it is proposed the study of the effect of barium oxide acting as synthetic flow in the behavior of masses for stoneware from the use of raw materials found in the deposits of minerals of the Rio Grande do Norte that it makes use of a great natural potential for the industrialization of the product. The porcelanato is a sophisticated product with excellent final properties being applied as ceramic coating in buildings of high standard of engineering. The raw materials selected for the development of the study had been two types of argilas, two types of feldspatos, dolomita, talco, barium carbonate and silica, being characterized by X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis and thermal analysis. Thus, it is intended to define four formulations using the cited raw materials that will be processed, conformed and sintered in the temperatures of 1150 °C, 1175 °C, 1200 °C, 1225 °C e 1250 °C. From the physical characterizations, chemical and morphologic of the formed formulations, the effect of barium oxide is determined in the physical and mechanical properties of the studied system carrying water absorption tests, linear retraction, apparent porosity, apparent specific mass, compacting curve, flexural strength and microstructural analysis by XRD and SEM. After analyzing the results, indicated that barium oxide acts as a flux of high temperature and as the ordering of structure, where the embedded glass phase has the nucleating effect phase potassium silico-aluminum reacting with free silica which together with the high content of potassium concentrated form a new crystalline phase called microcline. The masses studied with the addition of barium oxide present physical-mechanical properties highly satisfactory in reduced firing temperatures, which implies a saving in energy given off in the production and increased productivity

Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of impregnation of a sponge (usually polymer) with ceramic slurry, followed by a heat treatment, which will happen the decomposition of organic material and sintering the ceramic material, resulting in a ceramic structure which is a replica of impregnated sponge. Knowledge of the mechanical properties of these ceramics is important for these materials can be used commercially. Gibson and Ashby developed a mathematical model to describe the mechanical behavior of cellular solids. This model wasn´t for describing the ceramics behavior produced by the replica method, because it doesn´t consider the defects from this type of processing. In this study were researched mechanical behavior of porous alumina ceramics obtained by the replica method and proposed modifications to the model of Gibson and Ashby to accommodate this material. The polymer sponge used in processing was characterized by thermogravimetric analysis and scanning electron microscopy. The materials obtained after sintering were characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a correction of this model through a factor related to struts integrity degree, which consider fissures present in the structure of these materials besides defects geometry within the struts

Efeito da adição de diatomita no comportamento reológico e mecânico de argamassas colantes

The mortar is a type of adhesive products used in large scale in construction, it is a function of its variety and ease of application . Although industrialized product and endowed with technology in its production is very frequent occurrence of the same pathology , which causes frequent damage and losses in the construction industry. Faced with this real market situation , the technical and scientific study of the effects of the addition of diatomite on the rheological and mechanical behavior of adhesive mortars are needed. This work back as a suggestion the use of diatomite as a mineral additive in formulations of adhesive mortars for partial replacement of cellulose based additives . The choice of using this mineral occurs through physical, chemical and rheological properties that justify its use in this product line , and is a raw material abundant in our region and can thus contribute positively to the minimization of direct costs cellulose -based additives . Industrial adhesive mortar used for comparison , was type AC1 . Formulations of adhesive mortar with diatomite held constant dosed quantities of sand, cement and the water / cement (w / c ) , or adhesive mortar formulations were developed with levels 10, 20, 30 and 40% of diatomite substituting part of the cellulose -based additives . These mortars were subjected to the following tests that define and evaluate the rheological and mechanical behavior of this type of mortar. The results attest the best performance of the adhesive mortar type AC1 with partial replacement of 30 % of the cellulose-based additive for diatomite

Avaliação do comportamento tribológico de compósitos poliéster/fibra de vidro utilizando resíduos de poliéster/fibra de vidro e carbonato de cálcio como carga

The use of composite materials and alternative is being increased every day, as it becomes more widespread awareness that the use of renewable and not harmful to the environment is part of a new environmentally friendly model. Since its waste (primarily fiberglass) can not be easily recycled by the difficulty that still exists in this process, since they have two phases mixed, a polymeric matrix thermoset difficult to recycle because it is infusible and phase of fiber reinforcements. Thermoset matrix composites like Polyester + fiberglass pose a threat due to excessive discharge. Aiming to minimize this problem, aimed to reuse the composite Polyester + fiber glass, through the wastes obtained by the grinding of knifes and balls. These residues were incorporated into the new composite Polyester/Fiberglass for hot compression mold and compared tribological to composites with filler CaCO3, generally used as filler, targeting a partial replacement of CaCO3 by such waste. The composites were characterized by thermal analysis (TGA, DSC and DMA), by the surface integrity (roughness determination, contact angle and surface energy), mechanical properties (hardness) and tribological tests (wear and coefficient of dynamic friction) in order to evaluate the effect of loads and characterize these materials for applications that can take, in the tribological point of view since waste Polyester + fiberglass has great potential for replacement of CaCO3

Compósito Polimérico Híbrido: Comportamento Mecãnico, Descotinuidade Geométrica e Resistência Residual

The growing demand in the use of hybrid composite materials makes it essential a better understanding of their behavior face of various design conditions, such as the presence of geometric discontinuities in the cross section of structural elements. This way, the purpose of this dissertation is a study of the mechanical response (strength and stiffness), modes (characteristics) of fracture and Residual Strength of an hybrid polymeric composite with and without a geometric discontinuity in its longitudinal section (with a reduction in the cross section) loaded by uniaxial tension. This geometric discontinuity is characterized by central holes of different diameters. The hybrid composite was fabricated as laminate (plate) and consisting of ortho-tereftalic polyester matrix reinforced by 04 outer layers of Jute fibers bidirectional fabrics and 01 central layer of E-glass bidirectional fabric. The laminate was industrially manufactured (Tecniplas Nordeste Indústria e Comércio Ltda.), obtained by the hand lay-up technique. Initially, a study of the volumetric density of the laminate was made in order to verify its use in lightweight structures. Also were performed comparative studies on the mechanical properties and fracture modes under the conditions of the specimens without the central hole and with the different holes. For evaluating the possible influence of the holes in the structural stability of the laminate, the Residual Strength of the composite was determined for each case of variation in hole diameter. As a complementary study, analyses of the macroscopic final fracture characteristic of the laminates were developed. The presence of the central hole of any sizes, negatively changed the ultimate tensile strength. Regarding the elastic modulus, moreover, the difference found between the specimens was within the range of tests displacement, showing the laminate stability related to the stiffness

Avaliação do comportamento de fluidos micelares na recuperação avançada de petróleo

In heavy oil fields there is a great difficulty of the oil to flow from the reservoir to the well, making its production more difficult and with high cost. Most of the original volumes of oil found in the world are considered unrecoverable by the use of the current methods. The injection of micellar solutions has a direct action in the oil interfacial properties, resulting in an enhanced oil recovery. The objective of this research was the study and selection of micellar solutions with ability to decrease the interfacial interactions between fluids and reservoir formation, increasing oil production. The selected micellar solutions were obtained using commercial surfactants and surfactants synthesized in laboratory, based on the intrinsic properties of these molecules, to use in the enhanced oil recovery. Petroleum Reservoirs were simulated using sandstone plugs from Botucatu formation. Experiments with conventional and enhanced oil recovery techniques were accomplished. The obtained results showed that all micellar solutions were able to enhance oil recovery, and the micellar solution prepared with a SB anionic surfactant, at 2% KCl solution, showed the best recovery factor. It was also accomplished an economic analysis with the SB surfactant solution. With the injection of 20% porous volume of micellar solution, followed by brine injection, the increment in petroleum recovery can reach 81% recovery factor in the 3rd porous volume injected. The increment in the total cost by the addition of surfactant to the injection water represents R$ 7.50/ton of injected fluid

Caracterização do comportamento geotécnico de mistura de resíduo de pneus e solo laterítico

A technological alternative for the correct disposal of tires is the use in the construction of embankment with soil and shredded tires. The use of waste tires in tropical soils requires prior knowledge of the properties and limitations of these materials. In this work, the results of an experimental program was devised to characterize the behavior of mixtures of waste tires and a lateritic soil. The residue used in this study is classified as tire buffings with an average size of 1.4 mm. The laboratory program included testing of particle size analysis, Atterberg limits, compaction, direct shear tests, permeability and confined compression tests with pure soil, pure tire and the mixtures. Proportions of 0% (pure soil), 10%, 20%, 40%, 50 % and 100% (pure tire) by weight were used. For the confining stress levels used in the study, the presence of tire residue provided a considerable increase in shear strength of the mixture. The maximum shear strength was obtained for a residue content of 40% by weight. Permeability tests on samples of waste under a confining stress of 100 kPa showed that the permeability increases significantly with increasing residue content until a residue content of 20%. The increase in permeability after that value showed to be negligible. Confined compression tests showed that the soil mixed with tire residue becomes more compressible than the pure soil. The secant constrained modulus (Msec) for the same vertical stress decreases with increasing percentage of residue.

Influência da fadiga no comportamento neuromuscular do quadríceps femoral, após reconstrução do ligamento cruzado anterior

Muscle fatigue is a phenomenon that promotes physiological and biomechanical disorders and their changes in healthy subjects have been widely studied and have significant importance for care in preventing injuries, but we do not have many information about its effects in patients after ACL reconstruction. Thus, this study is to analyze the effects of fatigue on neuromuscular behavior of quadriceps after ACL reconstruction. To reach this objective, participants were forty men, twenty healthy (26,90 ± 6,29 years) and twenty after ACL reconstruction (29,75 ± 7,01 years) with a graft of semitendinosus and gracilis tendons, between four to six months after surgery. At first, there was an assessment of joint position sense (JPS) at the isokinetic dynamometer at a speed of 5°/s and target angle of 45° to analyze the absolute error of JPS. Next, we applied the a muscle fatigue protocol, running 100 repetitions of isokinetic knee flexion-extension at 90°/s. Concurrently with this protocol, there was the assessment of muscle performance, as the peak torque (PT) and fatigue index, and electromyographic activity (RMS and median frequency). Finally, we repeated the assessment of JPS. The statistical analysis showed that patients after ACL reconstruction have, even under normal conditions, the amended JPS compared with healthy subjects and that after fatigue, both have disturbances in the JPS, but this alteration is significantly exacerbated in patients after ACL reconstruction. About muscle performance, we could notice that these patients have a lower PT, although there are no differences between the dynamometric and EMG fatigue index. These findings show the necessity about the cares of pacients with ACL reconstruction in respect of the risks of articulate instability and overload in ligamentar graft

Dinâmica populacional e alimentar de Stegastes fuscus, (Osteichthyes:pomacentridae) em arrecifes da praia de Búzius, no Rio Grande do Norte

The damselfish, Stegastes fuscus Cuvier, 1830 (Osteichthyes: Perciformes: Pomacentridae), is abundant in the coastal reefs of Búzios Beach, Rio Grande do Norte, Brazil and they play an important role in the reef community ecology. The present study investigated the feeding strategy of this species considering the food habits and morfo-histology of the digestive tract. Influence of the environmental correlates such as temperature, rainfall and luminosity in the tidal rock pools were studied. The fish were captured on a monthly basis from September 2004 to August 2005, during which period 842 individuals of S. fuscus were captured, 125 males, 437 females and 280 individuals without sex identification. The sex ratio observed was 1 M : 3,5 F. The total body length of males varied from 3.6 to 11.3 cm, with a mean of 7.77 cm; that of females varied from 2.9 to 11.4 cm, with a mean of 7.85 cm, and that of sex grouped individuals varied from 2.9 to 11.4 cm, with a mean of 7.83. However, there was no difference between males and females in total body length. This species presented a positive alometric growth and the equations obtained for the relation between body mass and total body length were: Wt =0,0174Lt 3,1123 for males; Wt =0,0137Lt 3,2294 for females and Wt = 0,0148Lt 3.1928 for sex grouped individuals. The relation between total body length and standard length was L t = 1 ,3223Ls + 0,1527 for sex grouped individual s. February to August was associated to a long period of gonadal resting. The fish spawned during January and in September -October. The frequency of fish with empty stomachs occurred during August to December, whereas frequency of fish with food contents i n stomachs occurred during January to July. This species is considered as a preferential herbivore based on the volume of macroalgae in its diet composition. The morfo -histological aspects of S. fuscus confirm herbivory. Among the environmental factors con sidered only rainfall showed a correlation with the feeding habits of this species

Dinâmica de reprodução e comportamento reprodutivo de branchoneta Dendrocephalus brasiliensis Pesata, 1921 como incremento na produção de alimento vivo para peixes ornamentais

Reproductive behavior of Dendrocephalus brasiliensis Pesta, 1921(Crustacean: Anostracan). The reproductive behavior of fresh water Anostracan has been poorly investigated in carcinology specialized literature, specifically in relation to Dendrocephlaus brasiliensis Pesta, 1921, with abundant data just about the geographical distribution of that Anostracan. The objective of this work was to know the reproductive behavior of this Anostracan, in different seasons (dry and raine). For this, ripe individuals of both sexes were collected in four pond of the of Fish farming Station of Paulo Afonso (EPPA), through monthly captures in each ponds, from December 2004 to November 2005. The type of reproduction was observed after the placing in aquariums (a) of then with males and (b) other on individually, at the nauplii phase, where they stayed for 15 days until the reproductive age. The sexual proportion was calculated through the relative frequencies of males and females, every month, for the whole collection period during 10 days. the production of cysts was related to the size of the female. The male: female ratio in the study period was 1 male:1,07 female. The proportion male:female was from 48,25% : 51,75% along the year. Concerning the type of reproduction, it was observed that this specie is characteerized by sexual reproduction

Distribuição diária do comportamento da mosca da fruta Anastrepha zenildae Zucchi, (Diptera: Tephritidae) em laboratório.

The knowledge of Anastrepha zenildae behavioral aspects combined with the biology of Tephritidae may contribute to monitoring and control programs of this fruit fly that is considered as economically important to the Rio Grande do Norte state. In order to characterize the daily activity profile of this species, we studied the behaviors of resting, locomotion, feeding, cleaning, courtship, copulation and oviposition of animals submitted to an artificial 12:12h light-dark cycle (750:1lux) with controlled temperature (26±2 °C). The observations were made with groups of 16 males and 16 females during 3 consecutive days each generation from parental to F5. Resting, locomotion, feeding and cleaning data were recorded as frequency and time of occurrence by scanning technique in 15 minutes windows per hour, with a record each minute. Courtship, copulation and oviposition were recorded as frequency, time of occurrence and duration by al occurrences technique. Resting was the most frequent behavior with males resting more than females. Locomotion was more evident in the first half of the ligh phase with higher values in females. Cleaning and feeding behaviors were more frequent in the second half of the light phase for both sexes with females eating more frequently than males. During the courtship, males were grouped in lek formations showing wings vibration and pheromone liberation. Courtship occurred more frequently 4 to 7 h after lights on (81,9%) with copulations being more frequent 6 h after lights on with a mean duration of 58,1±40,4 min. Copulation attempts were observed in males inside and outside the lek with aggressive behavior being observed only between males in the lek. Oviposition behavior was similar to that described for other species of the genus with a peak of this activity 2-3 h after the lights on, mean duration of 43, 7±34, 8 sec and 2 to 5 eggs by event. According to the results, sexual behavior of A. zenildae is temporally different of other sympatric species of the genus, being favorable to the reproductive isolation as well as the use of resources as oviposition substrate.

Atividades comportamentais e comportamento alimentar de rã touro, Lithobates catesbeianus (Shaw, 1802), de pigmentação normal e albina em cativeiro

The behavior of bullfrogs reared in captivity must be well understood to support management practices that use efficient feeding regimes. In general, bullfrogs reared in captivity have normal pigmentation, but to develop an enhanced product, some studies have investigated the introduction of albino individuals in frog farms. The present study characterized the behavior of both pigmented and albino bullfrogs reared in captivity. In an initial experiment, 48 bullfrogs (70.5 ± 25.6 g) housed in small stalls were fed once a day at random times. Frogs were filmed and the images showed that both the pigmented and albino varieties behaved similarly: food intake was more frequent at dawn followed by light periods; moving and resting in dry areas may be associated to feeding events; frogs appeared to anticipate feeding time and to rest in the water more frequently in periods other than feeding time; daylight is the recommended period for feeding both pigmented and albino frogs. In a second experiment, 72 albino bullfrogs were fed at fixed times (10 a.m. or 4 p.m.) in small stalls. An initial weight of 23.8 ± 7.6 g was considered to evaluate frog performance, and after the animals reached 60.0 ± 20.0 g, they were filmed for behavior analyses. Food intake varied as a function of feeding time, and frogs were more likely to eat during the early hours of the day and immediately after receiving fresh food. Frogs fed only in the afternoon changed their behavior. Food supplied twice a day stimulated the albino frogs to eat at different times, but did not increase growth. Although fresh food stimulated feeding behavior, food intake was more frequent at dawn. Food supplied at this time of day should therefore be further investigated. The results did not indicate a more suitable feeding time (10 a.m. or 4 p.m.) for albino bullfrogs, or any advantage in using two feedings per day. The results provide xvi important information about bullfrogs in terms of food supply regime and activity preferences throughout the day. This novel information will contribute to future studies in this area

Composição ictiofaunística e estratégias reprodutivas de quatro espécies de peixes nativos da Bacia Hidrográfica Piranhas - Assu, Rio Grande do Norte

This study focuses on the fish fauna composition and reproductive strategies of four native fish species in relation to environmental variables of the Piranhas-Assu hydrographic basin of the Caatinga biome, Rio Grande do Norte, Brazil. Fish and environmental data were collected monthly during the period September 2008 to February 2010, in the Marechal Dutra reservoir and River Acauã a tributary of Piranhas- Assu. The fish were measured, weighed and dissected, and the gonads were removed, weighed and examined macroscopically for identification and determination of gonad maturation stages. The results of this work generated seven articles. The first article is about the fish fauna composition of the Piranhas-Assu hydrographic basin, Rio Grande do Norte. The 602 fish samples captured were distributed in four orders (Characiformes, Perciformes, Siluriformes and Synbranchiformes), 11 families and 22 species, of which 17 are endemic to the Caatinga ecoregion. The order Characiformes was more representative followed by Perciformes, Siluriformes and Synbranchiformes. The second article is about the length-weight relationship and growth of seven native fish species Crenicichla menezesi, Cichlasoma orientale, Triportheus angulatus, Psectrogaster rhomboides, Pimelodella gracilis, Prochilodus brevis and Leporinus piau from a semiarid Brazilian reservoir. The third article is about the reproductive aspects of Crenicichla menezesi. Males were larger, heavier and with a slight predominance as compared to females. Four stages of gonadal development were characterized, being immature, maturing, mature and spent. The females reached sexual maturity earlier than males, with an average fecundity of 398 oocytes per batch. The spawning was partial with a long reproductive period. The fourth article deals with the reproductive strategy of Leporinus piau a neotropical freshwater fish in semi-arid region of Brazil. The population of L. piau (n = 211) showed a slight predominance of males (55%), with larger and heavier females. The males matured earlier than the females. This species presented total spawning, with an average fecundity of 55,000 mature oocytes. Rainfall and concentration of dissolved oxygen acted as influential factors during the spawning season. L. piau shows a seasonal reproductive strategy. The fifth article is related to the morphometric-meristic characteristics and reproductive aspects of freshwater sardine, Triportheus angulatus from River Acauã of the Caatinga biome. There was a predominance of larger females, reaching first maturation before males. There was total spawning during the rainy period of the region. The sixth article reports on the reproductive strategy of Psectrogaster rhomboides. The sex ratio was 1M: 1F, with negative allometric growth. Males reached sexual maturity earlier than females Females and males showed four stages of gonadal development and spawned during the rainy season. The fecundity was low and this species presented total spawning. The seventh article reports on the dynamics of territorial behavior of Crenicichla menezesi. Ten agonistic behaviors displayed by the males were observed: frontal and lateral threat, chasing, circular chasing, perpendicular, lateral and mouth attacks, escape, parallel positioning and stationary. The formation of four social groups was observed among males: without interaction; interaction with submission and escape; with frontal and lateral agonistic interactions. In social interactions between males and females, it was observed that the larger males interacted more among themselves and with the larger females. The large male established its territory and the two small males along with the small female were excluded from the other groups. These studies clarified the fish fauna composition and reproductive strategies of four native species Crenicichla menezesi, Leporinus piau, Triportheus angulatus and Psectrogaster rhomboides of the Piranhas- Assu hydrographic basin of the Caatinga biome, Rio Grande do Norte, Brazil.