Aplicação das técnicas eletroanalíticas (voltametria cíclica e de pulso diferencial) usando o eletrodo de diamante dopado com boro para o estudo da isoniazida, etambutol, rifampicina e pirazinamida

In this work a study was done using electrochemical cyclic voltammetry and differential pulse voltammetry for isoniazida (INH), ethambutol (EMB), rifampicina (RIF) and pyrazinamide (PZA) using the electrode boron-doped diamond (BDD) as working electrode. It also verified the applicability of the technique of differential pulse voltammetry in the quantification of the active compounds used in the treatment of tuberculosis, subsequently applying in samples of pharmaceutical formulation. Among the four active compounds studied, isoniazid showed the best results for the detection and quantification using differential pulse voltammetry. At pH 4 and pH 8, for the calibration curves to INH showed good linearity, with quantification limits of 6.15 mmol L-1 (0,844 ppm) and 4.08 mmol L-1 (0.560 ppm) for the respective pH. The proposed method can be used to determine drug isoniazid, for recovery values were obtained in approximately 100%

Otimização evalidação de métodos analíticos para a determinação simultânea de tuberculostáticos (4-FDC) por CLAE/DAD e CLUE/ DAD

Tuberculosis is a serious disease, but curable in practically 100% of new cases, since complied the principles of modern chemotherapy. Isoniazid (ISN), Rifampicin (RIF), Pyrazinamide (PYR) and Chloride Ethambutol (ETA) are considered first line drugs in the treatment of tuberculosis, by combining the highest level of efficiency with acceptable degree of toxicity. Concerning USP 33 - NF28 (2010) the chromatography analysis to 3 of 4 drugs (ISN, PYR and RIF) last in average 15 minutes and 10 minutes more to obtain the 4th drug (ETA) using a column and mobile phase mixture different, becoming its industrial application unfavorable. Thus, many studies have being carried out to minimize this problem. An alternative would use the UFLC, which is based with the same principles of HPLC, however it uses stationary phases with particles smaller than 2 μm. Therefore, this study goals to develop and validate new analytical methods to determine simultaneously the drugs by HPLC/DAD and UFLC/DAD. For this, a analytical screening was carried out, which verified that is necessary a gradient of mobile phase system A (acetate buffer:methanol 94:6 v/v) and B (acetate buffer:acetonitrile 55:45 v/v). Furthermore, to the development and optimization of the method in HPLC and UFLC, with achievement of the values of system suitability into the criteria limits required for both techniques, the validations have began. Standard solutions and tablets test solutions were prepared and injected into HPLC and UFLC, containing 0.008 mg/mL ISN, 0.043 mg/mL PYR, 0.030 mg.mL-1 ETA and 0.016 mg/mL RIF. The validation of analytical methods for HPLC and UFLC was carried out with the determination of specificity/selectivity, analytical curve, linearity, precision, limits of detection and quantification, accuracy and robustness. The methods were adequate for determination of 4 drugs separately without interfered with the others. Precise, due to the fact of the methods demonstrated since with the days variation, besides the repeatability, the values were into the level required by the regular agency. Linear (R> 0,99), once the methods were capable to demonstrate results directly proportional to the concentration of the analyte sample, within of specified range. Accurate, once the methods were capable to present values of variation coefficient and recovery percentage into the required limits (98 to 102%). The methods showed LOD and LOQ very low showing the high sensitivity of the methods for the four drugs. The robustness of the methods were evaluate, facing the temperature and flow changes, where they showed robustness just with the preview conditions established of temperature and flow, abrupt changes may influence with the results of methods

Prevalência e susceptibilidade antimicrobiana de Staphylococcusspp. em quadros de saúde e doença periodontal

The aim of this study was determine the prevalence and antimicrobial susceptibility of Staphylococcus spp. from patients with periodontal disease and periodontally healthy, correlate them with factors to host, local environment and traits of the diseases. To this, thirty adults from 19 to 55 years old were selected. They had not periodontal treatment and no antibiotic or antimicrobial was administered during three previous months. From these individuals, sites periodontally healthy, with chronic gingivitis and/or periodontitis were analyzed. Eighteen subgingival dental biofilm samples were collected through sterile paper points being six from each tooth randomly selected, representing conditions mentioned. They were transported to Oral Microbiology laboratory, plated onto Mannitol Salt Agar (MSA) and incubated at 370C in air for 48 h. Staphylococcus spp. were identified by colonial morphology, Gram stain, catalase reaction, susceptibility to bacitracin and coagulase activity. After identification, strains were submitted to the antibiotic susceptibility test with 12 antimicrobials, based on Kirby-Bauer technique. To establish the relation between coagulase-negative Staphylococcus (CSN) presence and their infection levels and host factors, local environment and traits of diseases were used Chi-square, Mann-Whitney and Kruskal-Wallis tests to a confidence level of 95%. 86,7% subjects harbored CSN in 11,7% periodontal sites. These prevalence were 12,1% in healthy sites, 11,7% in chronic gingivitis, 13,5% in slight chronic periodontitis, 6,75% in moderate chronic periodontitis and in sites with advance chronic periodontitis was not isolated CSN, without difference among them (p = 0,672). There was no significant difference to presence and infection levels of CSN as related to host factors, local environm ent and traits of the diseases. Amongst the 74 samples of CSN isolated, the biggest resistance was observed to penicillin (55,4%), erythromycin (32,4%), tetracycline (12,16%) and clindamycin (9,4%). 5,3% of the isolates were resistant to oxacilin and methicillin. No resistance was observed to ciprofloxacin, rifampicin and vancomycin. It was concluded that staphylococci are found in low numbers in healthy or sick periodontal sites in a similar ratio. However, a trend was observed to a reduction in staphylococci occurrence toward more advanced stages of the disease. This low prevalence was not related to any variables analyzed. Susceptibility profile to antibiotics demonstrates a raised resistance to penicillin and a low one to methicillin. To erythromycin, tetracycline and clindamycin was observed a significant resistance

Micropartículas de quitosana estruturadas com aerosil®: estabilidade, adsorção, encapsulação e liberação de substâncias ativas

Biodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive biomaterial alternative because of its physicochemical and biological characteristics. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially for non-invasive ways oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcomed in order to enable the exploration of the full pharmaceutical potential use of these microparticles. Many studies have focused on the modification of chitosan microsphere structures with cross-linkers, various polymers blends and new organic-inorganic hybrid systems in order to obtain improved properties. In this work, microspheres made of chitosan and nanosized hydrophobic silica (Aerosil R972) were produced by a method consisting of two steps. First, a preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion was prepared followed by spray drying. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM) were used to characterize the microspheres. Also, the were conducted acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin and propranolol hydrochloride (drug models) release under simulated physiological conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide. The results show here encourage further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes.

Identificação de genes em Chromobacterium violaceum relacionados à resposta ao estresse

The sequencing of the genome of Chromobacterium violaceum identified one single circular chromosome of 4.8 Mb, in which approximately 40% of the founded ORFs are classified as hypothetical conserved or hypothetical. Some genic regions of biotechnological and biological interest had been characterized, e. g., environmental detoxification and DNA repair genes, respectively. Given this fact, the aim of this work was to identify genes of C. violaceum related to stress response, as the ones involved with mechanisms of DNA repair and/or genomic integrity maintenance. For this, a genomic library of C. violaceum was built in Escherichia coli strain DH10B (RecA-), in which clones were tested to UVC resistance, resulting in five candidates clones. In the PLH6A clone were identified four ORFs (CV_3721 to 3724). Two ORFs, CV_3722 and CV_3724, were subcloned and a synergic complementation activity was observed. The occurrence of an operon was confirmed using cDNA from C. violaceum in a RT-PCR assay. Further, it was observed the induction of the operon after the treatment with UVC. Thus, this operon was related to the stress response in C. violaceum. The mutagenesis assay with rifampicin after the treatment with UVC light showed high frequency of mutagenicity for the ORF CV_3722 (Pol III δ subunit). In this way, we propose that the C. violaceum δ subunit can act in DH10B in the translesion synthesis using Pol IV in a RecA independent-manner pathway. In growth curve assays other four clones (PLE1G, PLE7B, PLE10B and PLE12H) were able to complement the function at the dose 5 J/m2 and in mutagenicity assays PLE7B, PLE10B and PLE12H showed frequencies of mutation with significant differences upon the control (DH10B), demonstrating that in some way they are involved with the stress response in C. violaceum. These clones appear to be interrelated, probably regulated by a messenger molecule (eg., nucleotide c-di-GMP) and/or global regulatory molecule (eg., σS subunit of RNA polymerase).The results obtained contribute for a better genetic knowledge of this specie and its response mechanisms to environmental stress.

Obtenção de sistemas multiparticulados de isoniazida revestidos com polímero de liberação entérica

Known for thousands of years, tuberculosis (TB) is the leading cause of mortality by a single infectious disease due to lack of patient adherence to available treatment regimens, the rising of multidrug resistant strains of TB (MDR-TB) and co-infection with HIV virus. Isoniazid and rifampicin are the most powerful bactericidal agents against M. tuberculosis. Because of that, this couple of drugs becomes unanimity in anti-TB treatment around the world. However, the rifampicin in acidic conditions in the stomach can be degraded rapidly, especially in the presence of isoniazid, which reduces the amount of available drug for absorption, as well as its bioavailability, contributing to the growing resistance to tuberculostatic drugs. Rifampicin is well absorbed in the stomach because of its high solubility between pH 1 and 2 and the gastric absorption of isoniazid is considered poor, therefore it is mostly intestinal. This work has as objective the development of gastro-resistant multiple-systems (granules and pellets) of isoniazid aiming to prevent the contact with rifampicin, with consequent degradation in acid stomach and modulate the release of isoniazid in the intestine. Granules of isoniazid were obtained by wet method using both alcoholic and aqueous solutions of PVP K-30 as aggregating and binder agent, at proportions of 5, 8 and 10%. The influence of the excipients (starch, cellulose or filler default) on the physical and technological properties of the granules was investigated. The pellets were produced by extrusionesferonization technique using isoniazid and microcrystalline cellulose MC 101 (at the proportion of 85:15) and aqueous solution of 1% Methocel as platelet. The pellets presented advantages over granular, such as: higher apparent density, smaller difference between apparent and compaction densities, smoother surface and, especially, smaller friability, and then were coated with an organic solution of Acrycoat L 100 ® in a fluidized bed. Different percentages of coating (15, 25 and 50%) were applied to the pellets which had their behavior evaluated in vitro by dissolution in acidic and basic medium. Rifampicin dissolution in the presence of uncoated and coated isoniazid pellets was evaluated too. The results indicate that the gastro resistance was only achieved with the greatest amount of coating and isoniazid is released successfully in basic step. The amount of rifampicin in the dissolution medium when the isoniazid pellets were not coated was lower than in the presence of enteric release pellets. Therefore, the polymer Acrycoat L 100 ® was efficient for coating with gastro-resistant function and can solve the problem of low bioavailability of rifampicin and help to reduce its dosage

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de magnésio como aditivo

The tricalcium phosphate ceramics has been widely investigated in the last years due its bioresorbable behavior. The limiting factor of the application of these materials as temporary implants is its low strength resistance. The tricalcium phosphate presents an allotropic transformation β→α around 1250 ºC that degrades its resistance. Some studies have been developed in order to densify this material at this temperature range. The objective of this work is to study the influence of the addition of magnesium oxide (MgO) in the sintering of β-TCP. The processing route was uniaxial hot pressing and its objective was to obtain dense samples. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements, analyzed of the microstructure. The addition of magnesium oxide doesn t cause an improvement of the mechanical strength in relation to material without additive.

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo

The calcium phosphate ceramics have been very investigated as material for bone implants. The tricalcium phosphate (β-TCP) had a great potential for application in temporary implants like a resorbable bioceramic. This material presents a limitation in its sintering temperature due to occurrence of the allotropic transformation β → α at temperatures around 1200°C, not allowing the attainment of dense ceramic bodies. This transformation also causes cracks, what diminishes the mechanical strength, limiting its use to applications of low mechanical requests. This work studies the influence of the addition of manganese oxide in the sintering of β-TCP. Two processing routes were investigated. The first was the powder metallurgy conventional process. The test bodies (samples) were pressed and sintering at temperatures of 1200 and 1250°C. The second route was uniaxial hot pressing and its objective was to obtain samples with high relative density. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements. The microstructure was analyzed by scanning electron microscopy. The addition of manganese oxide caused an improvement of the mechanical strength in relation to the material without additive and promoting the stabilization of β-TCP to greater temperatures

Identificação de genes em Chromobacterium violaceum relacionados à resposta ao estresse

The sequencing of the genome of Chromobacterium violaceum identified one single circular chromosome of 4.8 Mb, in which approximately 40% of the founded ORFs are classified as hypothetical conserved or hypothetical. Some genic regions of biotechnological and biological interest had been characterized, e. g., environmental detoxification and DNA repair genes, respectively. Given this fact, the aim of this work was to identify genes of C. violaceum related to stress response, as the ones involved with mechanisms of DNA repair and/or genomic integrity maintenance. For this, a genomic library of C. violaceum was built in Escherichia coli strain DH10B (RecA-), in which clones were tested to UVC resistance, resulting in five candidates clones. In the PLH6A clone were identified four ORFs (CV_3721 to 3724). Two ORFs, CV_3722 and CV_3724, were subcloned and a synergic complementation activity was observed. The occurrence of an operon was confirmed using cDNA from C. violaceum in a RT-PCR assay. Further, it was observed the induction of the operon after the treatment with UVC. Thus, this operon was related to the stress response in C. violaceum. The mutagenesis assay with rifampicin after the treatment with UVC light showed high frequency of mutagenicity for the ORF CV_3722 (Pol III δ subunit). In this way, we propose that the C. violaceum δ subunit can act in DH10B in the translesion synthesis using Pol IV in a RecA independent-manner pathway. In growth curve assays other four clones (PLE1G, PLE7B, PLE10B and PLE12H) were able to complement the function at the dose 5 J/m2 and in mutagenicity assays PLE7B, PLE10B and PLE12H showed frequencies of mutation with significant differences upon the control (DH10B), demonstrating that in some way they are involved with the stress response in C. violaceum. These clones appear to be interrelated, probably regulated by a messenger molecule (eg., nucleotide c-di-GMP) and/or global regulatory molecule (eg., σS subunit of RNA polymerase).The results obtained contribute for a better genetic knowledge of this specie and its response mechanisms to environmental stress.