Desenvolvimento de material compósito a base de raspa de pneu e látex para isolamento térmico

The process of recycling has been stimulated by the markets for several reasons, mainly on economical and environmental. Several products have been developed from recycled materials that already exist as well as several residues have been studied in different forms of applications. The greater majority of the applications for thermal insulation in the domestic, commercial and industrial systems have been elaborated in the temperature ranges between low to medium reaching up to 180oC. Many materials such as glass wool, rock wool, polystyrene are being used which are aggressive to the environment. Such materials in spite of the effectiveness in the retention of heat flow, they cost more and when discarded take several years to be absorbed by the nature. This way, in order to adapt to a world politics concerning the preservation of the environment, the present study was intended to develop a material composed of natural/biodegradable materials and industrial residues. The development of such a product in the form of a composite material based on tyre scrapes and latex for thermal insulation is presented in this research work. Thermal and physical properties of the tire scrapes as well as latex were studied in order to use them as raw materials for the manufacture of the intended composite to be applied as a thermal insulator in hot and cold systems varying between 0ºC and 200oC, respectively. Composite blankets were manufactured manually, in weight proportions of 1:1 (50:50%); 1:2 (33:67%) and 2:1 (67:33%) (tire scrapes: latex) respectively. Physical, mechanical and thermal properties of the composites were analyzed to obtain data about the viability of using the composite as a thermal insulator. The analyses carried out were based on standards ABNT, ASTM and UL. The maximum temperature obtained for the composite as a thermal insulator was 200ºC, which meets the range of applications that could be used as a thermal insulator in domestic as well as industrial purposes. The experimental results prove that the composite can be used as a thermal insulator on heated or cooled surface

Análise do desempenho térmico de um sistema de aquecimento solar utilizando coletor com superfície absorvedora em chapas de PVC

It s presented a solar collector to be used in a system for heating bath water, whose main characteristic is its low cost. The collector consists of five plates of PVC with 10 mm thick, 200 mm in width and 1400mm in length, with an area equal to 1.4 square meters. The plates were connected in parallel to the ends of PVC tubes of  40 mm and 32 mm. The plates were coated on one side with aluminum sheets of soft drinks and beers cans open. The system worked on a thermosiphon and was tested in two configurations: the plates uncoated and coated with aluminum material, to determine the influence of material on the efficiency of the collector. For both configurations was used EPS plates below the surface to minimize heat losses from the botton. The thermal reservoir of the heating system is, also, alternative and low cost, since it was constructed from a polyethylene tank for storing water, with volume of 150 end 200 liters. It will be presented the thermal efficiency, heat loss, water temperature of the thermal reservoir at the end of the process and simulation of baths for a house with four residents. The will be demonstrated thermal, economic and material viability of the proposed collector, whose main innovation is the use of recyclables materials, cans of beer and soft drinks, to increase the temperature of the absorber plate.

Estudo térmico de um sistema solar de aquecimento de água residencial para duas configurações de superfície absorvedora

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied

Análise do desempenho térmico de um sistema de aquecimento solar de baixo custo

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are low cost and easy manufacturing and assembly. The system operates under natural convection or thermosiphon. The absorbing surface of the collector is formed by twelve PVC pipes of 25 mm outside diameter connected in parallel via connections in T of the same material. The tubes were covered with absorbing fins made with recycled aluminum cans. We studied eight settings between absorber plate, thermal insulating EPS boards and thermal reservoirs 150 and 200 liters. It was determined the most efficient configuration for the correct purpose. We evaluated thermal parameters that proved the viability of the heating system studied

Estudo térmico e de materiais na construção de casas populares com blocos confeccionados a partir de um composto a base de cimento, gesso, eps e raspa de pneu

We built an experimental house on an UFRN´s land using blocks made by a composite consisting of cement, plaster, EPS, crushed rubber and sand. Several blocks were made from various compositions and we made preliminary tests of mechanical and thermal resistance, choosing the most appropriate proportion. PET bottles were used inside the block to provide thermal resistance. In this work, a second function was given to the bottles: to serve as a docking between the blocks, because the ends of the cylinders came out of each block on top as well as at the bottom, with the bottom cut, allowing to fit of the extremities of the upper cylinder of a block in the lower holes of the other one, which were formed by the cutting already mentioned. Minimum compression tests were performed according to ABNT standards for walls closing blocks (fence). With that house built, we did studies of thermal performance in order to ascertain conditions of comfort, checking external and internal temperatures in the walls and in the ambient, among other variables, such as wind speed and relative humidity. The resulting blocks provided adequate thermal insulation to the environment, where the walls presented differences up to 11.7 ºC between the outer and inner faces, getting the maximum temperature inside the house around 31 °C, within the so-called thermal comfort zone for warm climates. At the end of the experiments it was evident the effectiveness of that construction in order to provide thermal comfort in the internal environment of the house, as well as we could confirm the viability of building houses from recyclable materials, reducing the constructive costs, becoming a suitable alternative for low- incoming families. Moreover, besides the low cost, the proposal represents an alternative use of various recyclable materials, therefore considered an ecological solution

Compósito para fabricação de blocos para construção de casas: estudos térmico e de materiais

We present two models of blocks made of composite material obtained from the use of cement, plaster, EPS crushed, shredded tire, mud, sand and water, for the construction of popular housing. Were made metal molds for the manufacture of blocks to be used in the construction of a residence for low-income families. Performed tests of compressive strength of the composite for various formulations that met the specific standard for blocks used in construction. To study the thermal conductivity of the composite for further study of thermal comfort generated in a residence built with the proposed composite. We also determined the mass-specific and water absorption for each formulation studied. Using a home already built with another composite material, made up the closing of a window with the building blocks and found the thermal insulation, measuring external and internal temperatures of the blocks. The blocks had made good thermal insulation of the environment, resulting in differences of up to 12.6°C between the outer and inner faces. It will be shown the feasibility of using composite for the end proposed and chosen the most appropriate wording

Estudo de um isolante térmico para tubos fabricado em material compósito

It presents a new type of insulation for ductwork hot water, which can be used in solar systems for heating water, which consists of a composite of different compositions based on plaster, cement and EPS ground, palm and water. This composite has as its main features easy assembly and manufacturing processes and low cost. Comparative results will be presented on the tests of materials and thermal tubes proposed. Four formulations were used to manufacture tubes with three diameters 70, 65 and 42mm. It was also tested conventionally used for elastomeric foam insulation to 110 ° C, for a comparative analysis with the composite pipe insulator proposed. It will demonstrate that the cost of manufacturing of such tubes is competitive with alternative elastomeric foam tested, but results of the composite tube to the temperature range studied, are lower. Another drawback of the composite insulator tube is its large mass. It would be important to test such a composite for greater levels of temperature to a diagnostic technique competitive with conventionally used insulators. A positive factor of using the proposed composite-tube would be the recycling of EPS so damaging to the environment, representing an environmentally friendly application of science

Recuperação e purificação de proteínas do soro de queijo tipo coalho usando cromatografia de troca iônica e interação hidrofóbica em leito na forma expandida

Expanded Bed Adsorption plays an important role in the downstream processing mainly for reducing costs as well as steps besides could handling cells homogenates or fermentation broth. In this work Expanded Bed Adsorption was used to recover and purify whey proteins from coalho cheese manufacture using Streamline DEAE and Streamline SP both ionic resins as well as a hydrophobic resin Streamline Phenyl. A column of 2.6 cm inner diameter with 30 cm in height was coupled to a peristaltic pump. Hydrodynamics study was carried out with the three resins using Tris-HCl buffer in concentration of 30, 50 and 70 mM, with pH ranging from 7.0 to 8.0. In this case, assays of the expansion degree as well as Residence Time Distribution (RTD) were carried out. For the recovery and purification steps, a whey sample of 200 mL, was submitted to a column with 25mL of resin previously equilibrated with Tris/HCl (50 mM, pH 7.0) using a expanded bed. After washing, elution was carried out according the technique used. For ionic adsorption elution was carried out using 100 mL of Tris/HCl (50 mM, pH 7.0 in 1M NaCl). For Hydrophobyc interaction elution was carried out using Tris/HCl (50 mM, pH 7.0). Adsorption runs were carried out using the three resins as well as theirs combination. Results showed that for hydrodynamics studies a linear fit was observed for the three resins with a correlation coefficient (R2) about 0.9. In this case, Streamline Phenyl showed highest expansion degree reaching an expansion degree (H0/H) of 2.2. Bed porosity was of 0.7 when both resins Streamline DEAE and Streamline SP were used with StremLine Phenyl showing the highest bed porosity about 0.75. The number of theorical plates were 109, 41.5 and 17.8 and the axial dipersion coefficient (Daxial) were 0.5, 1.4 and 3.7 x 10-6 m2/s, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. Whey proteins were adsorved fastly for the three resins with equilibrium reached in 10 minutes. Breakthrough curves showed that most of proteins stays in flowthrough as well as washing steps with 84, 77 and 96%, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. It was observed protein peaks during elution for the three resins used. According to these peaks were identified 6 protein bands that could probably be albumin (69 KDa), lactoferrin (76 KDa), lactoperoxidase (89 KDa), β-lactoglobulin (18,3 KDa) e α-lactoalbumin (14 KDa), as well as the dimer of beta-lactoglobulin. The combined system compound for the elution of Streamline DEAE applied to the Streamline SP showed the best purification of whey proteins, mainly of the α-lactoalbumina

Expressão imuno-histoquímica das proteínas MMP-9, VEGF e FVW em lesões centrais e periféricas de células gigantes

Central giant cell lesion (CGCL) and peripheral giant cell lesion (PGCL) of the jaws have a distinct clinical behavior, although they share histopathologic features. It is still unclear whether these clinical differences are supported by a distinct pattern of immunoexpression of markers for multinucleated giant cells (GC) and mononuclear cells (MC). The purpose of this study was to compare the immunohistochemical expression of VEGF, MMP-9 in CG and MC and measure the vascularization by vWF to check whether there are differences in expression of these biomarkers between CGCL and PGCL. Paraffin wax blocks of 20 cases of LCCG and 20 LPCG were retrieved. MMP-9 immunoreactivity was greater in the CM of PGCL compared to VEGF (p<0.05). VEGF expression was greater in the CM of CGCL compared to PGCL (p<0.05) and it was greater in the overall expression of CGCL compared to PGCL (p<0.05). Vascularity was quantified by microvascular counting (MVC). MVC was greater in the PGCL compared CGCL (p<0.05). MMP-9 showed a greater tendency of expression in CGCL, though was not significant (p>0.05). We tested correlation between the proteins studied in each group and found a significant negative correlation between VEGF and vWF in CGCL (p<0.05). These results suggest that there are differences in the expression of VEGF in CM and overall expression between the lesions, although no statistically significant difference in the overall expression of the MMP-9. Then, there was a trend in increased expression of MMP-9 and VEGF in CGCL, possibly by the involvement of both proteins in osteoclastogenesis. Additionally, the results of this study indicate a higher degree of vascularization in PGCL compared to CGCL, fact that can be directly linked to the reactive nature of the PGCL, where the inflammatory process with its rich angiogenesis contributes significantly to these findings.

Expressão imuno-hitoquímica das proteínas RANK, RANKL e OPG em cistos radiculares e cistos dentígeros

Receptor ativador nuclear κappa B (RANK), ligante do receptor ativador nuclear κappa B (RANKL) e osteoprotegerina (OPG) são membros da família do fator de necrose tumoral relacionados com o metabolismo ósseo. A formação, diferenciação e atividade dos osteoclastos são reguladas por estas três proteínas. RANK é um receptor transmembrana presente em diversos tipos celulares, principalmente em células de linhagem macrofágica, linfócitos, células dendríticas e fibroblastos e quando ativado pelo seu ligante, RANKL, promove a diferenciação e ativação de células osteoclásticas responsáveis pelo processo de reabsorção óssea. A OPG impede a ligação RANK/RANKL atuando como um receptor inibitório para a atividade osteolítica. O objetivo deste estudo foi comparar a expressão imuno-histoquímica destes biomarcadores em cistos radiculares (n=20) e cistos dentígeros (n=20). A expressão imuno-histoquímica destes marcadores foi avaliada no epitélio e na cápsula dos cistos por escores e percentuais médios de imunomarcação. Para o epitélio, a análise semi-quantitativa revelou um padrão similar dos escores de imunomarcação de RANK, RANKL e OPG nas lesões, não havendo diferença estatística significante (p=0.589, p=0.688, p=0.709, respectivamente). Para a cápsula cística a análise quantitativa, mostrou diferença estatística significante entre os percentuais médios de imunomarcação do RANK e RANKL (p=0,001 e p=0,005, respectivamente) nos cistos. A correlação dos escores de imunomarcação de RANKL e OPG no epitélio do CR e do CD revelou diferença estatística significante (p=0,029, p=0,003, respectivamente). No epitélio dos CRs e dos CDs observou-se uma maior imunoexpressão da OPG comparada a do RANKL. Os resultados apontam a presença de RANK, RANKL e OPG nos cistos radiculares e cistos dentígeros, sugerindo a atuação destas proteínas no desenvolvimento e expansão das lesões no osso adjacente

Análise comparativa da imunoexpressão das proteínas hmlh1 e hmsh2 em carcinomas epidermóides de lábio inferior e queilites actínicas com graus variados de displasia

Lip squamous cell carcinoma (SCC) may develop from a premalignant condition, actinic cheilitis (AC) in 95% of the cases. Both premalignant and neoplastic lip diseases are caused mainly by chronic exposure to the ultraviolet component of solar radiation, especially UVB. This exposure causes disruption of the cell cycle and damage to DNA repair systems, like mismatch repair, altering proteins repair as hMLH1 and hMSH2. This research aimed to investigate the immunohistochemical expression of hMLH1 and hMSH2 proteins in lower lip SCCs and ACs, providing additional information about carcinogenesis of the lower lip. The sample consisted 40 cases of ACs and 40 cases of lower lip SCCs. Histological sections of 3 μm were submitted to immunoperoxidase method, for immunohistochemical analysis of lesions were counted in 1000 cells (positive and negative), data were evaluated both in absolute numbers and percentage of immunostained cells, the latter by assigning scores. Associations of the variables and comparative analysis of biomarker expression were performed by Fisher s exact and Pearson s chi-square, "t" student, one-way ANOVA, Mann- Whitney e Kruskal-Wallis tests. The level of significance was 5%. It was found that, in lower lip SCC, the mean of the proteins was higher in female patients (hMLH1= 369,80 + 223,98; hMHS2 = 534,80 + 343,62), less than 50 years old (hMLH1 = 285,50 + 190,65; hMHS2 = 540,00 + 274,79) and classified as low-grade malignancy (hMLH1 = 264,59 + 179,21; hMHS2 = 519,32 + 302,58), in these data only to sex, for hMLH1 protein, was statistically significant (p=0.034). Comparing the different lesions, we observed that for both hMLH1 and hMSH2 protein, the average of positive epithelial cells decreased as the lesion was graded at later stages. The ACs classified without dysplasia or mild dysplasia had the highest average of immunostained cells (hMLH1 = 721.23 + 88.116; hMHS2 = 781.50 + 156.93). The ACs classified as moderate or severe dysplasia had intermediate values (hMLH1 = 532,86 + 197,72; hMHS2 = 611,14 + 172,48) and SSCs of the lower lip had the lowest averages (hMLH1 = 255,03 + 199,47; hMHS2 = 518,38 + 265,68). There was a statistically significant difference between groups (p<0.001). In conclusion, our data support the hypothesis that changes in immunoexpression of these proteins is related to the process of carcinogenesis of the lower lip

Expressão Imuno-histoquímica das proteínas GLUT-1 e HIF-1α em lesões vasculares de mucosa oral

The correct histological diagnosis of vascular lesions in the oral mucosa is critical, especially in defining the treatment and prognosis, as some vascular lesions show spontaneous involution and others do not show such behavior. This study analyzed the expression immunohistochemistry of human glucose transporter protein (GLUT-1), in oral benign vascular tumors and to reclassify such lesions according to with his immunoexpression. In addition, we evaluated the immunohistochemical expression of hypoxia-inducible factor 1 alpha (HIF-1α), the main transcription factor involved in cellular adaptation to hypoxia. We analyzed 60 cases of benign oral vascular tumors: 30 cases with histological diagnosis of HEM and 30 cases of oral pyogenic granuloma (PG). The results of this research showed that of the 30 lesions initially classified as HEM, only 7 showed immuno-positivity for GLUT-1, remaining with the initial diagnosis. The remaining 23 were reclassified as vascular malformation (VM) (13 cases) and PG (10 cases). All cases in the sample with an initial diagnosis of PG were negative for GLUT-1, demonstrating the accuracy of histological diagnosis of these lesions. Concerning to the immunoexpression of HIF-1α, the Mann-Whitney test revealed a statistically significant difference between the cases of GP and MV (p = 0.002), where the median of GP (m=78) was higher than the MV (m=53). Based on these results, this study showed that a histological diagnosis alone is not always sufficient for the correct diagnosis of oral HEM and that HIF-1α participates in the pathogenesis of vascular lesions

Análise imuno-histoquímica das proteínas VEGF e HIF-1α na doença periodontal

Periodontal disease is a complex inflammatory and infectious condition that immune host, front of the microbial aggressions, can lead to disease progression, resulting in tissue destruction. The tissue damage induces the release of regulatory molecules, which protective roles and / or destructive, including proteins VEGF (vascular endothelial growth factor vascular) and HIF-1 α (hypoxia-induced factor α -1). Thus, this study investigated, quantitatively and comparatively, the immunohistochemical expression of VEGF (vascular endothelial growth factor) and HIF-1 α (hypoxia induced factor 1-α), proteins involved in inflammation, angiogenesis and hypoxia, in human gingival tissues. Therefore, 75 samples of gingival tissues were examined. Thirty samples were chronic periodontitis, 30 with chronic gingivitis and 15 healthy gingival. After sections analysis, positives and negatives inflammatory and endothelial cells in the connective tissue were counted and converted into percentage. Data were statistically analyzed using Kruskal-Wallis test and Spearman correlation. The results showed that both proteins marked. It was observed higher immunoreactivity for HIF-1 α at chronic gingivitis and periodontitis specimens compared to healthy sites, however, no statistically significant differences were observed among them (p>0.05). The VEGF immunostaining showed similarity among the cases of periodontitis, gingivitis and healthy gingiva. Moderate and positive correlation statistically significant differences were verified for the expressions of VEGF and HIF-1α in gingival health (r = 0,529, p = 0.04). Thus, it can be conclude that possibly the route of HIF-1 α, is activated in periodontal disease may have involvement of the protein in pathogenesis and progression of disease, and that activation of VEGF, can be in addition to being triggered transcription by HIF-1 α may be also influenced by other additional factors such as the action of periodontal microorganisms endotoxins

Expressão imuno-histoquímica das proteínas IFN-γ e TGF-β1 em cistos radiculares e cistos dentígeros

Odontogenic cysts are pathologic cavities covered by odontogenic epithelium and filled by liquid, desquamated cells or other materials. The intraosseous lesions, such as radicular cyst and dentigerous cyst, present a potential of expansion capable of promoting the destruction of the surrounding osseous tissue. The mechanisms related to this process of expansion are the proliferation of cystic epithelium, the increase of the osmolarity of the cystic fluid and the synthesis of reabsorption factors such as IFN-γ and TGF-β1. The aim of this study was to evaluate and compare the immunohistochemical expression of IFN-γ and TGF-β1 between radicular cysts and dentigerous cysts in order to understand the role and behavior of these proteins in the expansion of these cysts. We selected 20 cases of radicular cyst and 20 cases of dentigerous cyst chosen from the files of UFRN s Laboratory of Oral Pathology. After analyzing the clinical data, the cases underwent the routine staining technique (HE) and immunohistochemistry for the appearance of IFN-γ and TGF-β1 in the epithelium and capsule of these cysts. The statistical analysis using the Mann-Whitney test revealed no statistically significant difference in immunoexpression of IFN-γ between the epithelium (p = 0.565) and capsules (p = 0.414) of radicular cysts and dentigerous cysts. Moreover, there was no statistically significant difference of immunoexpression of TGF-β1 between the epithelium (p = 0.620) and capsules (p = 0.056) of radicular cysts and dentigerous cysts. The Wilcoxon test revealed no statistically significant difference between IFN-γ and TGF-β1 imunoexpressions in the epithelium (p = 0.225) and capsules (p = 0.370) of radicular cysts. There was no statistically significant difference between IFN-γ and TGF-β1 imunoexpressions in the epithelium (p = 0.361) of dentigerous cysts. However, there was a statistically significant difference between IFN-γ and TGF-β1 immunoexpressions in the capsule (p = 0.001) of dentigerous cysts, being TGF-β1 the factor which presented the most significant immunoexpression. Given these results, we conclude that there was no difference in immunohistochemical expression of IFN-γ and TGF-β1 between radicular and dentigerous cysts and that TGF-β1 was more significant than the IFN-γ in the capsule of dentigerous cysts

Estudo da expressão imuno-histoquímica das proteínas MMP-9, MMP-13 e TIMP-1 em ameloblastomas e tumores odontogênicos ceratocistos

Ameloblastomas and keratocystic odontogenic tumors (KOT) represent odontogenic lesions that, despite their benign nature, are distinguished by a distinct biological behavior, characterized by locally aggressive growth and recurrent episodes. The gnathic bone resorption caused by the growth of these lesions is a key to the expansion of the same, both being mediated by osteoclastic cells like enzymatic activity of various matrix metalloproteinases (MMPs) factor. The expression of stimulatory factors and inhibitors of bone resorption has been correlated with the development of these lesions, with emphasis to some MMPs such as collagenases and gelatinases and tissue inhibitors of metalloproteinases (TIMPs), among others. Based on the premise that stimulatory and inhibitory factors of osteolytic processes can be decisive for the growth rate of intraosseous odontogenic lesions, this experiment evaluated the immunoreactivity of MMP-9, -13 and TIMP-1 protein in the epithelium and mesenchyme of ameloblastoma and the KOT specimens, by a quantitative analysis of the immunoreactivity cells. Statistical analysis was performed using the Mann-Whitney and Wilcoxon tests with a significance level set at 5 %. Immunohistochemical expression of MMP-9, -13 and TIMP-1 was observed in 100% of cases both in the epithelium and in mesenchyme. The immunoreactivity in the epithelium of KOT and ameloblastomas revealed a predominance of score 3 for MMP-9 (p=0.382) and MMP-13 (p=0.069) and no statistically significance for TIMP-1, the latter being significantly higher immunoreactivity in ameloblastomas. In the mesenchyme, there was a higher score immunoreactivity of MMP-13 (p=0.031) in ameloblastomas in relation to KOT, whereas for MMP-9 and TIMP-1 no statistically significant difference (p=0.403 was observed, p=1.000). The calculation of the ratio of scores revealed expression of proteins in general, similarity of the lesions, a significant predominance of equal expression of TIMP-1 and MMP-9 was observed only in the epithelium of ameloblastoma. The marked immunostaining of MMP-9 , MMP-13 and TIMP-1 in epithelium and mesenchyme of the lesion indicate that these proteins involved in ECM remodeling required for tumor progression, however, specific differences in the expression of some of these proteins, are not sufficient to suggest differences in the biological behavior of ameloblastomas and KOTs