53 resultados para Proteção contra corrosão


Relevância:

30.00% 30.00%

Publicador:

Resumo:

La diversidad sexual emerge en las Américas como una de las cuestiones más importantes en relación con la protección y promoción de los derechos humanos. A partir de la democratización de la mayor parte de los Estados Sudamericanos en los años 80, se ha iniciado una discusión acerca de la ampliación del concepto de igualdad con el fin de introducir el derecho a la diferencia como otra expresión de la dignidad de la persona humana, cuyos estudios fueron encabezado de lo que se llamaba La hermenéutica de la Diversidad. En este escenario, el Derecho Internacional de los Derechos Humanos aparece como el principal responsable por el proceso de reconocimiento de la diversidad sexual como un derecho humano, lo que permite la asignación de temas tales como la sexualidad y el género en la agenda de los principales órganos regionales de protección de derechos humanos, así como en la agenda de algunos Estados, que por su promoción de políticas de diversidad han llegado a ser considerados empresarios normativos en relación con el libre ejercicio de la sexualidad humana. En este sentido, se pretende con esta tesis analizar el proceso de reconocimiento de la diversidad sexual como un derecho humano en el marco del sistema interamericano de protección, comprobando el potencial normativo de Argentina, Brasil y Uruguay con respecto a la adopción de normas internas promoción de la diversidad sexual. También tenemos la intención de analizar la norma internacional llamada Convención Interamericana contra todas las formas de discriminación e intolerancia como el primer tratado producido por el sistema interamericano para la protección de la sexualidad como un derecho digno de protección. La investigación ha demostrado que después de la posición adoptada por la Comisión y la Corte Interamericana respecto al ejercicio de la sexualidad, países como Argentina, Brasil y Uruguay promovieron un progreso significativo en el campo de las libertades individuales y en el campo de las políticas públicas de asignación de la sexualidad como un derecho que necesita de una protección efectiva del Estado

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The great demand for Federal Institutions of High Education (IFES) design, triggered by the favourable political moment, boosts the public works market and brings with it the stigma of seeking the lowest cost and meet the federal Law 8.666/93 (Bids). In this context, this research makes an analysis of compliance with Fire Safety’s normative requirements in IFES’s architectural designs, taking this point as an evaluation of quality of designs. For the study, were used, IFES’s designs, specifically from UFERSA – Universidade Federal Rural do Semiárido and UFRN – Universidade Federal do Rio Grande do Norte, selected by the relationship use x public served and yet, in the replication of these buildings’ construction. The research was developed through the identification of the Fire Safety applicable legislation to the designs in question, with the determination of the demanded conditions that are architect’s autonomy or that affect the architectural design. Tabulated the requirements, through data collection and measures gathered in the blueprints, was made a comparison and verification of the compliance with these. The results of this evaluation reveal that the minimum requirements was not fulfilled and that IFES’s architectural designs, taken as object in this study, certainly will suffer restrictions in their regularization process with the Fire Department. It is concluded that is necessary an improvement in the IFES’s designs to meet the minimum fire safety regulations and improvement in quality. Moreover, the results direct to the understanding that level of knowledge about Fire Safety received in undergraduate by architects is insufficient for appropriate elaboration of architectural designs in this area.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study presents the issue of Children and Youth sexual violence from a critical eye in assessing the actions of the organs of defense and protection in cases of sexual abuse against children and adolescents in the city of Natal / RN. We aimed to perform this evaluation from the investigation of 05 cases of child and adolescent victims of sexual abuse that were answered by Precinct Specializing in Defense of Children and Adolescents (DCA), considering the service flow of cases, the articulation between the organs that make up System Warranty rights (SGD), the record of the complaint, as well as the elapsed time between the record of the complaint and the accountability of the offender. Thus, the present study consists in an analysis from the quantitative and qualitative theoretical-methodological approach assuming 'sexual violence in their social, historical, cultural, legal and economic dimensions. The route established between the knowledge about the object and the method of analysis involved: literature about the conceptual discussion on sexual violence, analyzing quantitative data provided by DCA, as well as semi-structured interviews with victims and those responsible for the professionals working in institutions of the defense agencies. Is apprehended in this study that the situations of violence against children is a multifaceted phenomenon that has expressions from ancient societies, assuming a peculiarity in contemporary society to consider the juvenile population as subjects of rights. Furthermore, it was possible to identify the lack of effectiveness, with respect to the actions of the organs of defense in intervention situations of sexual abuse now investigated as yet not actually configure a process of articulation between these bodies from the perspective of ensuring rights and break the cycle of violence.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work aims to study and investigate the use of a hybrid composite polymer formed with blanket aramid (Kevlar 29) fiber blanket flax fiber and particulate dry endocarp of coconut (Cocos nucifera Linn), using as matrix an epoxy resin based thermoset for use in areas of protective equipment. Besides such material is used an aluminum plate, joined to the composite by means of glue based on epoxy and araldite commercial. The manufacturing process adopted was manual lamination (Hand Lay Up) to manufacture the hybrid composite. After the composite is prepared, an aluminum plate is subjected to pressure and glued to cure the adhesive. Layers of veil will also be used to separate the particulate from the linen blanket layer without disturbing the alignment of the fibers of the blankets. To characterize the mechanical and physical behavior was manufactured a plate of 800 x 600 mm of the hybrid composite, which were removed specimens for tests of water absorption to saturation; density; impact test (Charpy) and two test specimens for ballistic testing 220 mm x 200 mm to make a comparative study between the dry state and saturated water absorption and thus see the ballistic performance of these two conditions. The test was applied to make a comparative study of fracture in these two conditions, caused by penetrating ballistic missile (38 and 380). To test the impact (Charpy) will analyze the absorbed energy, fracture appearance and lateral contraction, also in dry condition and saturation of absorbed water, thereby analyzing situations where the impact load is relevant, such as bumps and shocks produced by stone, metal or wooden bars among others. The proposed configuration, along with the tests, has the purpose, application in the fields of equipment against ballistic impact, such as helmets; bullet proof vests; shields; protective packaging and other items to be identified in this research.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The thesis presents the results of research that addresses the performance of selective horizontal partitioning to promote Fire Safety in Buildings - FSB. Horizontal partitioning is a passive protection measure, settable in the early stages of the design process and controlled by the architect. However, there is a frequent reconfiguration of the rooms in academic buildings to adjust them for the space demand. Thus, large classrooms could turn into two or more smaller rooms, for example. Regardless when the subdivision occurs in the design phase or during the occupation of the building, the regulations just ensures the compartimentation of the room if all fireguard devices are present in the room. Knowing the fire's first minutes are the most important for life protection, we defend the hypothesis that a kind of partitioning ignored by regulatory standards is able to favoring the building vacancy and occupants rescue, for promote the room’s smoke exhaust. The performance of the selective horizontal partitioning due different blend of openings for smoke outlet was simulated on CFD software. The results indicate that selective horizontal partitioning is able to promote an upper smoke free layer and delay the indoor temperature growth.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The thesis presents the results of research that addresses the performance of selective horizontal partitioning to promote Fire Safety in Buildings - FSB. Horizontal partitioning is a passive protection measure, settable in the early stages of the design process and controlled by the architect. However, there is a frequent reconfiguration of the rooms in academic buildings to adjust them for the space demand. Thus, large classrooms could turn into two or more smaller rooms, for example. Regardless when the subdivision occurs in the design phase or during the occupation of the building, the regulations just ensures the compartimentation of the room if all fireguard devices are present in the room. Knowing the fire's first minutes are the most important for life protection, we defend the hypothesis that a kind of partitioning ignored by regulatory standards is able to favoring the building vacancy and occupants rescue, for promote the room’s smoke exhaust. The performance of the selective horizontal partitioning due different blend of openings for smoke outlet was simulated on CFD software. The results indicate that selective horizontal partitioning is able to promote an upper smoke free layer and delay the indoor temperature growth.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis has as objective presents a methodology to evaluate the behavior of the corrosion inhibitors sodium nitrite, sodium dichromate and sodium molybdate, as well as your mixture, the corrosion process for the built-in steel in the reinforced concrete, through different techniques electrochemical, as well as the mechanical properties of that concrete non conventional. The addition of the inhibitors was studied in the concrete in the proportions from 0.5 to 3.5 % regarding the cement mass, isolated or in the mixture, with concrete mixture proportions of 1.0:1.5:2.5 (cement, fine aggregate and coarse aggregate), superplasticizers 2.0 % and 0.40 water/cement ratio. In the modified concrete resistance rehearsals they were accomplished to the compression, consistence and the absorption of water, while to analyze the built-in steel in the concrete the rehearsals of polarization curves they were made. They were also execute, rehearsals of corrosion potential and polarization resistance with intention of diagnose the beginning of the corrosion of the armors inserted in body-of-proof submitted to an accelerated exhibition in immersion cycle and drying to the air. It was concluded, that among the studied inhibitors sodium nitrite , in the proportion of 2.0 % in relation to the mass of the cement, presented the best capacity of protection of the steel through all the studied techniques and that the methodology and the monitoring techniques used in this work, they were shown appropriate to evaluate the behavior and the efficiency of the inhibitors