Projeto, construção e levantamento de desempenho de um concentrador solar cilíndro parabólico com mecanismo automático de rastreamento solar

An cylinder-parabolic solar concentrator is presented to produce steam for different applications. This prototype was built in glass fiber with dimensions that follow a study of optimization of parameters inherent in the optical reflection of sunlight by the surface of reflection and absorption of the same by tubing that leads the fluid of work. The surface of the concentrator of 2.24 m² has been covered by layers of mirror with 1.0 m of lenght and 2.0 cm wide. The absorb tubing consists of a copper tube diameter equal to 28 mm. The concentrator is moving to follow the apparent motion of the sun. It will be presented the processes of manufacturing and assembly of the concentrator proposed, which has as main characteristics the facilities construction and assembly, in addition to reduced cost. Will be presented data from tests performed to produce steam setting up some parameters that diagnose the efficiency of the concentrator. It will be demonstrated the viabilities thermal, economic and of materials of the proposed system.The maximum temperature achieved in the vacuum tube absorber was 232.1°C and average temperature for 1 hour interval was 171.5°C, obtained in a test with automation. The maximum temperature achieved in the output of water was 197.7°C for a temperature of 200.0°C in the absorber tube. The best average result of the water exit temperature to interval of 1 hour was 170.2°C for a temperature of 171.2°C, in the absorber tube, obtained in test with automation. Water exit mean temperatures were always above of the water steaming temperature. The concentrator present a useful efficiency of 38% and a production cost of approximately R$ 450,00 ( $ 160.34)

Projeto, construção e análise de desempenho de coletores solares alternativos utilizando garrafas pet

A solar alternative system for water heating is presented. It work on a thermosiphon, consisting of one or two alternative collectors and a water storage tank also alternative, whose main purpose is to socialize the use of energy mainly to be used by people of low income. The collectors were built from the use of pets bottles, cans of beer and soft drinks and tubes of PVC, ½ " and the thermal reservoirs from a drum of polyethylene used for storage of water and garbage placed inside cylinder of fiber glass and EPS ground between the two surfaces. Such collectors are formed by three elements: pet bottles, cans and tubes absorbers. The heating units, which form the collector contains inside the cans that can be closed, in original form or in the form of plate. The collectors have an absorber grid formed by eight absorbers PVC tube, connected through connections at T of the same material and diameter. It will be presented data of the thermal parameters which demonstrate the efficiency of the heating system proposed. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be demonstrated that this alternative heating system, which has as its main feature low cost, presents thermal, economic and materials viabilities

Projeto, construção e análise de desempenho de um forno solar alternativo tipo caixa a baixo custo

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Projeto, construção e análise de eficiência térmica de um sistema de aquecimento solar de água de baixo custo

We studied the feasibility of using a system of Solar Water Heating (SAS) with low cost, for three configurations. In configurations I and II have the collector grid absorber composed of six PVC tubes placed in parallel on the tile cement. In configuration II, the PVC tubes were transparent cover made of plastic bottles. Configuration III uses a collector composed of 12 black HDPE pipes, supported on four cement tiles 2.44 m x 0.50 m, two by two overlapping and interspersed with a filling of glass wool, comprising an area exposed to the global radiation incident of 2.44 m2, with the top two tiles painted matte black. In this configuration, the HDPE pipes replace conventional PVC pipes painted black. The total cost of SAS for configuration III, the most economical, was around $ 150.00. For the configurations tested the system of operation was thermosyphon collector. The study showed that the proposed systems have good thermal efficiency, are easy to install and handle and have low cost compared to conventional.

Aperfeiçoamento no projeto de um protótipo de misturador-decantador à inversão de fases visando aplicação na indústria do petróleo

In the oil industry the mixture oil/water occurs in the operations of production, transportation and refining, as well as during the use of its derivatives. The amount of water produced associated with the oil varies and can reach values of 90% in volume in the case of mature phase of the production fields. The present work deals with the development of new design of the Mixer Settler based on Phase Inversion (MDIF) in a laboratory scale. We envisage this application in industrial scale so the phases of project, construction and operation are considered. The modifications most significant, in comparison with the original prototype, include the materials of construction and the substitution of the equipment used in the mixing stage of the process. It was tested the viability of substitution of the original system of mechanical mixing by a static mixer. A statistical treatment by means of an experimental design of composed central type was used in order to evaluate the behavior of the main variables of the separation process as function of the efficiency of separation for the new device. This procedure is useful to delimit an optimal region of operation with the equipment. The variables of process considered on the experimental design were: oil concentration in the feeding water (mg/L); Total volumetric flow rate (L/h); Ratio organic/water on volumetric basis (O/A). The separation efficiency is calculated by comparison of the content of oil and greases in the inlet and outlet of the equipment. For determination of TOG (Total Oil and Grease), the method used was based in the absorption of radiation in the infra-red region. The equipment used for these determinations was InfraCal® TOG/TPH Model HATR-T2 of the Wilks Enterprise, Incorporation. It´s important to stand out that this method of measure has being used by PETROBRAS S.A. Results of global efficiency of separation oil/water varied from 75.3 to 97.7% for contaminated waters containing up to 1664,1 mg/L of oil. By means of tests carried out with a real sample of contaminated water supplied by PETROBRAS we have got an effluent specified in terms of the legal standards required for discharging. Thus, the new design of equipment constitutes a real alternative for the conventional systems of treatment of produced water in the oil industry

Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Controle sanitário e ambiental de um projeto de reúso em um complexo de prédios corporativos

The study that resulted in this dissertation was developed at OU RNCE PETROBRAS, in Natal, which implemented a project of rational use and reuse of water, including use of wastewater from a Sewage Treatment Plant (STP) already in place, diluted with water from own wells for irrigation of green area of the building complex corporate enterprise. Establish a methodology that can serve as guidelines for future projects controlled reuse of water like this was the objective of this research. Been proposed, implemented and evaluated three instruments of sanitary and environmental control: 1) adaptation of sewage treatment plant and quality control of the treated effluent 2) analysis of soil-nutrient interaction in the irrigated area, 3) knowledge of the local hydrogeology, especially with regard to the direction of flow of the aquifer and location of collection wells of Companhia de Águas e Esgotos do Rio Grande do Norte (CAERN) situated in the surroundings. These instruments have proven sufficient and appropriate to ensure the levels of sanitary and environmental control proposed and studied, which were: a) control of water quality off the STP and the output of the irrigation reservoir, b) control of water quality sub surface soil and assessment of progress on soil composition, c) assessment of water quality in the aquifer. For this, we must: 1) establishing the monitoring plan of the STP and its effluent quality sampling points and defining the parameters of analysis, improve the functioning of that identifying the adequacy of flow and screening as the main factors of operational control, and increase the efficiency of the station to a relatively low cost, using additional filters, 2) propose, implement and adapt simple collectors to assess the quality of water percolating into the soil of the irrigated area, 3) determine the direction of groundwater flow in the area study and select the wells for monitoring of the aquifer.

Diagnóstico do usuário no aprimoramento dos serviços de tecnologia da informação: um projeto de intervenção para o Ministério Público do Estado do Rio Grande do Norte

The information tecnology (IT) has, over the years, gaining prominence as a strategic element and competitive edge in organizations, public or private. In the judiciary, with the implementation of actions related to Judiciário Eletrônico, information technology (IT), definitely earns its status as a strategic element and significantly raises the level of dependence of the organs of their services and products. Increasingly, the quality of services provided by IT has direct impact on the quality of services provided by the agency as a whole. The Ministério Público do Estado do Rio Grande do Norte (MPRN) deployments shares of Electronic Government, along with an administrative reform, beyond these issues raised, caused a large increase in institutional demand for products and services provided by the Diretoria de Tecnologia da Informação (DTI), a sector responsible for the provision of IT services. Taking as starting point strategic goal set by MPRN to reach a 85% level of user satisfaction in four years, we seek to propose a method that assists in meeting the goal, respecting the capacity constraints of the IT sector. To achieve the proposed objective, we conducted a work in two distinct and complementary stages. In the first step we conducted a case study in MPRN, in which, through an internal and external diagnosis of DTI, accomplished by an action of internal consulting and one research of the user satisfaction, we seek to identify opportunities of change seeking to raise the quality perceived of the services provided by the DTI , from the viewpoint of their customers. The situational report, drawn from the data collected, fostered changes in DTI, which were then evaluated with the managers. In the second stage, with the results obtained in the initial process, empirical observation, evaluation of side projects of quality improvement in the sector, and validation with the managers, of the initial model, we developed an improved process, gazing beyond the identification of gaps in service a strategy for the selection of best management practices and deployment of these, in a incremental and adaptive way, allowing the application of the process in organs with little staff allocated to the provision of information technology services

Prospecção e formação no domínio das competências e habilidades em tecnologia da informação: o caso do projeto metrópole digital em Natal/RN

This study deals with cognitive competences and abilities that are relevant to selection and education regarding Information Technology (IT). These competences relate to problem solving, decision making, and practical intelligence that regard scholar and extracurricular knowledge mobilization. The research aimed to contribute for the improvement of a selection instrument, consisting of five arrays of skills (dealing with objectives and prospection), as well as the development and comprehension of those skills that are involved in IT education. This is done by means of an analysis on the selection instrument used in the first selective process that occurred at Metropole Digital an Institute at the Federal University of Rio Grande do Norte in Brazil. This was evaluated aiming to acknowledge IT education (with basic training and emphasis on Web programming and electronics). The methodology used was of quantitative method involving performance scores relating education delivery. An Anova analysis of variance was done along with descriptive analysis involving socioeconomic data that was not observed in the meaningful relations between parental instruction and student performance in the graduate course. These analyses were able to point out the importance and need of the policies for vacancy reservation on behalf of public school students. A Spearman correlation analysis was done considering the instrument selection performance in the training course. The instrument is presented as a predictor that is significantly moderate and presents a good performance in the course as a whole. A Cluster and Regression analysis was also realized in the process. The first analysis allowed finding performance groups (Clusters) that ranged from medium and inferior. The regression analysis was able to point out association amongst criterion variables and the (average performance in basic and advanced modules) and explanatory (five matrixes). Regression analysis indicated that matrix 1 and matrix 3 were pointed out as being the strongest ones. In all the above analysis, the correlation between the instrument and the course was considered moderate. Thus this can be related in some of the aspects present in the course such as emphasis on evaluation itself as well as in technical contents and practical skills (educational ones) and competences and selection skills. It is known that the mediation of technological artifact in cultural context can foster the development of skills and abilities relevant to IT training. This study provides subsidies to reflect on the adoption of selection instrument and IT training in the Institute. Thus the research offers means to achieve a interdisciplinary discussion and enriching of areas such as Psychology and Information Technology; all of which regarding competencies and skills relevant in IT training

Projeto pedagógico: abordagens e implicações no âmbito da formação em odontologia

Proposals that aim a redirection of current health attention models in Brazil are indispensible due to the need of health issues and its challenges imposed by society. These issues come forth in Higher Education Institutions in an attempt to devise ways to face these demands. The research aims to analyze the Pedagogical Project (PP) present in the Dentistry Graduation Course in the Federal University of Rio Grande do Norte in Brazil-(UFRN). This is done in coherence the Brazilian National Curricular Guidelines considering main competences established in the PP. This research was approved by the Ethics Committee at UFRN under document number 285/201. The work is of descriptive nature and was realized with 30 students in the Dentistry Graduation Course. Interviews were realized with the use of problem situation approach. The research was also supported by documental studies that dealt with syllabus present in the disciplines taught at UFRN. Data were processed with the use of the ALCESTE 4.9 software. It is possible to acknowledge that some conservative conceptions arise, even though there is use of active methodologies and innovation that aim to promote reflection and articulation for general competence development such as proposed in the Pedagogical Project in Dentistry Graduation Course at UFRN. These conceptions are mainly present in the teaching-learning process where students do not have full participation. Thus it is possible to conclude that even though there are advances and breakthroughs. This is seen with that fact that there was inclusion of multidisciplinary clinical work as well optional courses in the curriculum. It was also seen that there was occasional use of active teaching methodologies in Dentistry at UFRN. But there is still a need for a didactical and methodological resizing. These actions require the need for progressive development of competences and abilities during the formative process according to what was established in the Brazilian National Curricular Guidelines

Serviço Social Audit Saúde no SUS/RN: projeto ético político profissional e de reforma sanitária

Health policies in Brazil, the decentralization of SUS management responsibilities for the three spheres of government has driven the creation and regulation of the audits of health services in the National Audit Office, this is a trend of neoliberal policies imposed by international bodies like the World Bank and IMF to peripheral countries characterized by productive restructuring and reforming the state focuses on the presence of two competing projects in the area of health: Health Sector Reform Project which is based on the democratic rule of law with the assumption of health as social right and duty of the State in defending the extension of the conquest of rights and democratization of access to health care guaranteed through the public financing strategies and the effective decentralization of decisions pervaded by social control and privatized Health Project which is based on the state minimum, with a reduction in social spending or in partnerships and privatization, stronger nonprofit sector, subject to capitalist interests, is made effective through strategies targeting health policy and refilantropização actions. In this context, the present study is an analysis on the work of social audits of public health in infants from a qualitative and quantitative approach, embodied by the critical method of dialectical Marxist social theory that enabled us to unveil the characterization, the demands, challenges and outline the profile of Social Work in teams inserted audits of SUS in RN, but also provided evidence to demonstrate the prospects and possibilities of this area of activity of social workers. It was also found that through the audit work that the state fulfill its role as bureaucratic and regulator of health services with efficiency, effectiveness and economy. Yet, paradoxically, the audits of SUS may provide a vehicle for enforcing rights and ensuring the fundamental principles contained in the project of health reform, because it can be configured in a space of political struggle as representing a new field of knowledge production that needs to be appropriate for a theoretical critic able to redirect the social interests in favor of the user. From this perspective, it is concluded that the work of social audits of public health in infants despite the social relevance that prints, as they constitute an activity study of reality and its transformation proposition requires a transformative political action guided the discussion Marxist theory holds that the ethical project professional politician of Social Work

Projeto de Sistemas Integrados de Propósito Geral Baseados em Redes em Chip Expandindo as Funcionalidades dos Roteadores para Execução de Operações: A plataforma IPNoSys

It bet on the next generation of computers as architecture with multiple processors and/or multicore processors. In this sense there are challenges related to features interconnection, operating frequency, the area on chip, power dissipation, performance and programmability. The mechanism of interconnection and communication it was considered ideal for this type of architecture are the networks-on-chip, due its scalability, reusability and intrinsic parallelism. The networks-on-chip communication is accomplished by transmitting packets that carry data and instructions that represent requests and responses between the processing elements interconnected by the network. The transmission of packets is accomplished as in a pipeline between the routers in the network, from source to destination of the communication, even allowing simultaneous communications between pairs of different sources and destinations. From this fact, it is proposed to transform the entire infrastructure communication of network-on-chip, using the routing mechanisms, arbitration and storage, in a parallel processing system for high performance. In this proposal, the packages are formed by instructions and data that represent the applications, which are executed on routers as well as they are transmitted, using the pipeline and parallel communication transmissions. In contrast, traditional processors are not used, but only single cores that control the access to memory. An implementation of this idea is called IPNoSys (Integrated Processing NoC System), which has an own programming model and a routing algorithm that guarantees the execution of all instructions in the packets, preventing situations of deadlock, livelock and starvation. This architecture provides mechanisms for input and output, interruption and operating system support. As proof of concept was developed a programming environment and a simulator for this architecture in SystemC, which allows configuration of various parameters and to obtain several results to evaluate it

MARISA-MDD: uma abordagem para transformações entre modelos orientados a aspectos: dos requisitos ao projeto detalhado

Aspect Oriented approaches associated to different activities of the software development process are, in general, independent and their models and artifacts are not aligned and inserted in a coherent process. In the model driven development, the various models and the correspondence between them are rigorously specified. With the integration of aspect oriented software development (DSOA) and model driven development (MDD) it is possible to automatically propagate models from one activity to another, avoiding the loss of information and important decisions established in each activity. This work presents MARISA-MDD, a strategy based on models that integrate aspect-oriented requirements, architecture and detailed design, using the languages AOV-graph, AspectualACME and aSideML, respectively. MARISA-MDD defines, for each activity, representative models (and corresponding metamodels) and a number of transformations between the models of each language. These transformations have been specified and implemented in ATL (Atlas Definition Language), in the Eclipse environment. MARISA-MDD allows the automatic propagation between AOV-graph, AspectualACME, and aSideML models. To validate the proposed approach two case studies, the Health Watcher and the Mobile Media have been used in the MARISA-MDD environment for the automatic generation of AspectualACME and aSideML models, from the AOV-graph model

Projeto e implementação de uma plataforma MP-SoC usando SystemC

This work presents the concept, design and implementation of a MP-SoC platform, named STORM (MP-SoC DirecTory-Based PlatfORM). Currently the platform is composed of the following modules: SPARC V8 processor, GPOP processor, Cache module, Memory module, Directory module and two different modles of Network-on-Chip, NoCX4 and Obese Tree. All modules were implemented using SystemC, simulated and validated, individually or in group. The modules description is presented in details. For programming the platform in C it was implemented a SPARC assembler, fully compatible with gcc s generated assembly code. For the parallel programming it was implemented a library for mutex managing, using the due assembler s support. A total of 10 simulations of increasing complexity are presented for the validation of the presented concepts. The simulations include real parallel applications, such as matrix multiplication, Mergesort, KMP, Motion Estimation and DCT 2D

Projeto e implementação em FPGA de um processador com conjunto de instrução reconfigurável utilizando VHDL

The Reconfigurable Computing is an intermediate solution at the resolution of complex problems, making possible to combine the speed of the hardware with the flexibility of the software. An reconfigurable architecture possess some goals, among these the increase of performance. The use of reconfigurable architectures to increase the performance of systems is a well known technology, specially because of the possibility of implementing certain slow algorithms in the current processors directly in hardware. Amongst the various segments that use reconfigurable architectures the reconfigurable processors deserve a special mention. These processors combine the functions of a microprocessor with a reconfigurable logic and can be adapted after the development process. Reconfigurable Instruction Set Processors (RISP) are a subgroup of the reconfigurable processors, that have as goal the reconfiguration of the instruction set of the processor, involving issues such formats, operands and operations of the instructions. This work possess as main objective the development of a RISP processor, combining the techniques of configuration of the set of executed instructions of the processor during the development, and reconfiguration of itself in execution time. The project and implementation in VHDL of this RISP processor has as intention to prove the applicability and the efficiency of two concepts: to use more than one set of fixed instructions, with only one set active in a given time, and the possibility to create and combine new instructions, in a way that the processor pass to recognize and use them in real time as if these existed in the fixed set of instruction. The creation and combination of instructions is made through a reconfiguration unit, incorporated to the processor. This unit allows the user to send custom instructions to the processor, so that later he can use them as if they were fixed instructions of the processor. In this work can also be found simulations of applications involving fixed and custom instructions and results of the comparisons between these applications in relation to the consumption of power and the time of execution, which confirm the attainment of the goals for which the processor was developed