110 resultados para Programa de avaliação de impactos ambientais


Relevância:

100.00% 100.00%

Publicador:

Resumo:

It s more and more evident the subject of the shortage of water, worsened by the accelerated urbanization, growth of the population, increase of the demand and of the costs of its treatment, factors that are also tied up to the increase of the consumption of mineral waters, whose chemical composition or physical-chemistries characteristics do with that are considered beneficial to the health. The growth accelerated all over the world in its consumption aims the concern with the waters quality, the health and the incentive to the consumption of natural products. However, in spite of quite valuable, that resource is explored, most of the time, without optimization of production or actions that avoid wastefulness. This research is justified for the need of minimizing the negative environmental impacts caused by the mineral water s production, mainly in what it say about the generation of effluents and wastes in the productive process, through the study, development and application of cleaner production tools for the environmental management, pertinent for that section. The applicability of Environmental Management System was determined by means of the characterization of the environmental aspects of productive process in a company of the section, in the state of Rio Grande do Norte and of the discussion of the panoramas that demonstrate the tendency for a sustainable development. Actions as a reforestation, optimization of energy and water uses, recycle of solid residues and water reuse were applied during the research, resulting in the considerable reduction of wastes of raw materials and inputs and consequent environmental and economic won. A specific methodology was proposed with concepts of Environmental Management, integrating with Quality Management. As foundations for the elaboration of the methodology, it was realized a similarity analysis among the systems and, mainly, an analysis of the experiences observed in the case study, including specificities, needs and difficulties of the company. With these results, the implantation of a EMS as a company strategy has environmental, economic and social benefits, and this research can be applied and adequate to others companies and sectors

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Surveys carried out in many Brazilian cities have shown that the CDW Construction and Demolition Waste, in some cases, represent more than 50% of the mass of urban solid residue. Municipalities have struggled to manage in an effective way huge quantities of CDW generated every day and solve the problem of the illegal dumping in an inadequate area, which compromise the quality of life of the population as a whole, thus causing serious problems concerning social-environmental and sanitary. This paperwork was meant it carry out environmental diagnosis of the management and the final destination of the CDW in the city of Parnamirim/RN. The methodology used in this work constituted in the bibliographical research, conducted to give support and fundaments to the subject in question, identification of the main places of legal and illegal dumping, identification of the environmental impacts caused by the irregular deposition of the CDW, valuation of quantity and quality of the CDW and perception according to the Environmental Legislation. The necessary data for the elaboration of this study were carried out through the appliance of questionnaires with open and closed questions, applied to 14 (fourteen) Real Estate developer companies associated with SINDUSCON/RN and 05 companies that deal with the transportation and collection of CDW, formal and informal interviews, exploitational visits and photographical records. The collected data went through a statistic treatment being organized into tables and graphs. The main results obtained from this research show that the interviewees hold a medium knowledge of the specific Environmental Legislation; do not have an effective model of environmental management, resorting to only reusing CDW; that the reusing of CDW is not substantial, as much as the possibility of recycling has a minimal consideration. It was also verified that a considerable percentage of interviewees affirmed to send CDW to illegal and inadequate locations. It is expected that such study can be used as an important tool to subsidize the public administration in the pursuit of solutions which could bring benefits to society and the environment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work addresses biodiesel by transesterification from the use of waste frying oil as a possible technological alternative for both reducing greenhouse gas emissions and by presenting themselves as an environmental call to designate a rational use of oil when no longer played in the environment to become renewable energy. It has proposed location of a residual oil and fat treatment plant to produce biodiesel, using models of Location and Routing for the improvement of routes. To achieve the goal, questionnaires were administered in establishments that use oil or vegetable fat in their productive activities in order to quantify the residue, to analyze actions and environmental perception of people who work directly with the residue on the destination you are being given to oil and fat used. It has indicated using of two single setup location, the method of Center of Gravity and the model of Ardalan, a geographical point that minimizes the costs of transporting waste to the treatment plant. Actions have been proposed for the improvement of collection routes this residue using the Routing Method of Scanning, as an illustration. The results demonstrated the lack of knowledge of the people who deal directly with large amounts of waste, on the environmental impacts caused by their incorrect disposal. The models used were uniform since point out to neighborhoods in similar regions. The neighborhoods of Lagoa Nova / Morro Branco (Ardalan) and Nova Descoberta (Center of Gravity) as ideal for the installation of treatment plant. However, it is suggested to be tested other models that take into account new variables than those used (supply of waste and the distance between points). The routing through the method of scanning has shown that it is possible, in a simple way to optimize routes in order to reduce distances and therefore the logistics costs in the collection of such waste. Introducing a route as a test to gather the twenty largest oil suppliers used in sample frying, using as a main factor time 8 hour of working shift every day

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present work has the objective of presenting an investigation about the quantification, classification and destination of the waste of construction and demolition (RCD) in the city of Natal - RN, focusing the aspects of the environmental impacts and the strategic importance of the environmental administration in the earnings of productivity of the companies. Of the environmental point of view the research intends to identify and to quantify the monthly and annual production of RCD in the city, as well as to know the places of deposition of those residues. To reach the objectives of the study, an exploratory and descriptive research was accomplished, using a questionnaire with closed subjects and an open one, applied in 25 entrepreneurs of the branch of the building site, being 21 builders and 4 entrepreneurs of collection companies and removal dumps. As form of analysis of the data, the descriptive analysis was used and of crossing. The production engineering considers important the insert of best production practices and administration of the product in the companies, with views to the increase of your competitiveness, productivity earnings and improvement of the environmental aspects with views to the consumer's satisfaction, in that case the buyer of immobile. The principal results of the investigation demonstrate that there was not great variability of answers with relationship to the interviewees opinion in what he refers to the environmental practices. In your majority the building site interviewees entrepreneurs evidenced the absence of the public power, particularly the city hall of Natal, in the control, fiscalization and creation of mechanisms for a correct destination of RCD, as well as for your reuse and recycle. On the other hand also it was evident that the recycle or the reuse of RCD on the part of the companies is a rare practice and a lot of times inexistent, although the entrepreneurs' of the building site section great majority recognizes that would have won of productivity with the correct and intensive use of such measures

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The fishing is made possible by the handiwork of a fisherman, not using appliances that achieve the same levels of industrial fishing productivity and not causing environmental impacts on fish stocks with the same intensity. The adoption of sustainability practices in this type of fishing has been requested for the achievement of environmental and socioeconomic improvements, since its production has been decreasing over the years and overfishing has led to reduced stocks also stand out environmental aggressions such as pollution. Thus, this research aims to analyze the interference of environmental aspects/impacts that permeate the activity performed by fisherman on the beach of Ponta Negra, Natal-RN, in order to propose recommendations for environmental sustainability. We used a methodology based on the ergonomic work analysis (WISNER, 1987; GUERIN, 2001; VIDAL, 2008) using techniques such as observational and interactional observation protocols, photographs, videos, conversational action, and listening to verbalizations. To understand the vulnerability of the environment in which the activity is carried fisherman and the interferences that it suffers, we used the study of environmental aspects/impacts (SÁNCHEZ 2008). As a result, it appears that from the observations located and reports raftsmen, changes in the sea, the search for new fishing grounds farther from the coast, reducing fishery production, waste generation and pollution of the workplace, and the difficulty in docking rafts, factors arising from the pressures both for society as Seen by fisherman, denoting the necessity of drawing up recommendations and actions proposed by management activity by promoting discussion among raftsmen and accountable institutions, and training through workshops on environmental education, aiming to positive changes in the activity fisherman from Ponta Negra and the environment in which raftsmen are inserted in order to seek a sustainable activity, preserving its characteristics

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study deals with environmental issues on agriculture. In this context, the aim of this study is investigate factors able to influence the environmental conscientization of students of a agricultural technicals school about the aspects and environmental impacts related to the agricultural productive process. Besides, the used methodology on this work was to the application of a questionnaire based in Likert-kind scale with closed questions, they are constituted of variables which consisted of groups denominated perception, attitude, communitarian sense, commitment, sel-consciousness, knowledge and student profile. Like data analysis way was used descriptive analysis and chi-square to check the association significance between the perception variable with the variable ones of cited groups. The results obtained show that the environmental knowledge variable was one of the that showed high significance when it associated to the variables of perception group. The students with environmental knowledge showed high consideration that the production activities on agriculture cause large adverse impacts on environment. After the identification of some factors of environmental conscientization are shown recommendations which school must prepare techniques in aware high school of agricultural sciences with the environmental problems which be able to apply sustainable technologies on agriculture instead of traditional ones through the benefit of environment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This objective of this work was to investigate the enviromental perception of technician of clinical laboratories, in the city of the Natal/RN, focusing the generated environmental aspects and impacts in the activities, the strategical importance of the environmental management for the activity, as well as the knowledge about environmental norms and resolutions applied to the sector. A type survey exploratory and descriptive was carried through, using a questionnaire applied in 82 clinical laboratory, getting a return tax of 53,65%, or either, 44 laboratories. The results of the descriptive analyses point with respect to environmental conscience of the interviewed, therefore the majority (75%) described the activities of clinical analyses as great imapact on the environment. Although the interviewed present certain knowledge on the advantages of practical of envivonmental protection and the risks that the activities of clinical analyses offer, some important practical of environmental protection arer not develped by the majority of the iterviewed. The carried through statistical analyses had allowed to investigate the level of environmental knowledge of the professionals of the sector, being consisted themselves that they present little knowledge on practical ISO 14001 and of environmental protection in the health public sector. It can be conclude that, a program of environmental qualification for the sector becomes necessary, in order to improve the knowledge of the professionals of the area, and that the majority of the professionals would have a good recptivity therefore recognize the benefits of the practicadl of environmental protection for the competitiveness of the clinical analyses laboratories

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The world market of Kaolin has been growing as new investments for better quality of materials have been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of the states of Rio Grande do Norte and Paraiba have great impact in society. Usually this dross is disposed clandestinely in places like roads, river banks and lands of small cities. The present work shows the characteristics of the kaolin produced by the mining company in Junco do Seridó, Paraiba state, western Seridó, 300 km from Natal, in the border of both states. After that, researches were done to study its physical and the chemistry characteristics, trying to see if it can be used in white ceramic. The samples got were bolted in fabric of 325# . The technological characteristics tried to use it as a product in white ceramic. For that, it was made a haracterization of the subject matter through enlargement analyses, ATG and ATD, elaborating three formulations that were burned in four different temperatures, 1175, 1200, 1250 and 1300 degrees centigrade up to 30 minutes. After the burning, the subjects were submitted to water absorbing tests, linear retreating, apparent porosity, apparent specific mass, resistance to flexibility and MEV. For one of the mixtures it was obtained demanded properties for a semi porous material

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The technical and economic viability of solar heating for swimming pools is unquestionable, besides there it replaces the high costs and environmental impacts of conventional supply of energy, and it improves an optimization in the pool heating uses. This work applies the principles of the greenhouse effect: advanced thermodynamics, heat retention and equalization of temperature, to optimize the solar heating equipment, reducing the area required by collectors as much as 40% (still estimated value) for commercial collectors, with minor architectural and aesthetic impacts on the environment. It features a solar heating alternative in pools, whose main characteristics: low cost, simplicity in manufacturing and assembly and a faster heating. The system consists of two collectors spiral hoses made of polyethylene with a hundred meters each, and working on a forced flow, with only one pass of the working fluid inside the coils, and is used to pump itself treatment of pool water to obtain the desired flow. One of the collectors will be exposed to direct solar radiation, and the other will be covered by a glass slide and closed laterally, so providing the greenhouse effect. The equipment will be installed in parallel and simultaneously exposed to the sun in order to obtain comparative data on their effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this scientific article is to introduce the opportunities of implementation of cleaner production (CP) in a shrimp culture farm. The methodology used for this was exploratory research implemented in a production unit located in the Northeast Brazil. The scientific article approaches since generic aspects of the technique about the management to use water, energy and the effluent characterization of this productive activity. It discusses quantitative aspects, environmental questions and chances of P+L during the productive process phases. The results points to input economy in the form of feed, soil correctives, medicines, and energy applied to the process, which range from 4% to 27%, emphasizing the small profit should be viewed as a source of considerable environment return. The authors conclude for the adoption property of this technique in this agribusiness segment, point out to the management importance of the input dosage in the quality of the final effluent, besides the adoption of a physical-chemistry remediation mechanism to the residual of Sodium metabissulphite used in the process of shrimp caught

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Emissions of CO2 in the atmosphere have increased successively by various mechanisms caused by human action, especially as fossil fuel combustion and industrial chemical processes. This leads to the increase in average temperature in the atmosphere, which we call global warming. The search for new technologies to minimize environmental impacts arising from this phenomenon has been investigated. The capture of CO2 is one of the alternatives that can help reduce emis ions of greenhouse gases. The CO2 can be captured through the process of selective adsorption using adsorbents for this purpose. Were synthesized by hydrothermal method, materials of the type MCM-41 and Al-MCM-41 in the molar ratio Si / Al equal to 50. The synthesis of gels were prepared from a source of silicon, sodium, water and aluminum in the case of Al-MCM-41. The period of synthesis of the materials was 5 days in autoclave at 100°C. After that time materials were filtered, washed and dried in greenhouse at 100 º C for 4 hours and then calcined at 450 º C. Then the calcined material was functionalized with the Di-isopropylamine (DIPA) by the method of wet impregnation. We used 0.5 g of material mesopores to 3.5 mL of DIPA. The materials were functionalized in a closed container for 24 hours, and after this period were dried at brackground temperature for 2 hours. Were subsequently subjected to heat treatment at 250°C for 1 hour. These materials were used for the adsorption of CO2 and were characterized by XRD, FT-IR, BET / BJH, SEM, EDX and TG / DTG. Tests of adsorption of CO2 was carried out under the following conditions: 100 mg of adsorbent, temperature of 75°C under flow of 100 mL/min of CO2 for 2 hours. The desorption of CO2 was carried out by thermogravimetry from ambient temperature to 900ºC under flow of 25 mL min of He and a ratio of 10ºC/min. The difratogramas X-ray for the synthesized samples showed the characteristic peaks of MCM-41, showing that the structure of it was obtained. For samples functionalized there was a decrease of the intensities of these peaks, with a consequent reduction in the structural ordering of the material. However, the structure was preserved mesopores. The adsorption tests showed that the functionalized MCM-41 is presented as a material promising adsorbent, for CO2 capture, with a loss of mass on the desorption CO2 of 7,52%, while that in Al-MCM- 41 functionalized showed no such loss

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Intensive use of machinery and engines burning fuel dumps into the atmosphere huge amounts of carbon dioxide (CO2), causing the intensification of the greenhouse effect. Climate changes that are occurring in the world are directly related to emissions of greenhouse gases, mainly CO2, gases, mainly due to the excessive use of fossil fuels. The search for new technologies to minimize the environmental impacts of this phenomenon has been investigated. Sequestration of CO2 is one of the alternatives that can help minimize greenhouse gas emissions. The CO2 can be captured by the post-combustion technology, by adsorption using adsorbents selective for this purpose. With this objective, were synthesized by hydrothermal method at 100 °C, the type mesoporous materials MCM - 41 and SBA-15. After the synthesis, the materials were submitted to a calcination step and subsequently functionalized with different amines (APTES, MEA, DEA and PEI) through reflux method. The samples functionalized with amines were tested for adsorption of CO2 in order to evaluate their adsorption capacities as well, were subjected to various analyzes of characterization in order to assess the efficiency of the method used for functionalization with amines. The physic-chemical techniques were used: X- ray diffraction (XRD), nitrogen adsorption and desorption (BET/BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), CNH Analysis, Thermogravimetry (TG/DTG) and photoelectron spectroscopy X-ray (XPS). The CO2 adsorption experiments were carried out under the following conditions: 100 mg of adsorbent, at 25 °C under a flow of 100 ml/min of CO2, atmospheric pressure and the adsorption variation in time 10-210 min. The X-ray diffraction with the transmission electron micrographs for the samples synthesized and functionalized, MCM-41 and SBA-15 showed characteristic peaks of hexagonal mesoporous structure formation, showing the structure thereof was obtained. The method used was efficient reflux according to XPS and elemental analysis, which showed the presence of amines in the starting materials. The functionalized SBA -15 samples were those that had potential as best adsorbent for CO2 capture when compared with samples of MCM-41, obtaining the maximum adsorption capacity for SBA-15-P sample

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Understanding the historical and ecological relationships which are influent in current biological diversity is one of the most challenging tasks of evolutionary biology. Recent systematics emphasizes the need of integrative approaches to delimit different lineages and species. The northeastern Brazil, mostly placed in Caatinga biome, is characterized by a semi-arid weather, low precipitation and seasonal behavior of rivers. This region is regarded lacking as ichthyological knowledge and one of the most threatened by anthropic activities. Further, will be affected by a massive water diverpsion work that will transfer waters from São Francisco basin, to other major four basins: Jaguaribe, Apodi-Mossoró, Piranhas-Açu and Paraiba do Norte. Loss of diversity and richness, hibridizitation, community interactions changes, population homogenization, changes in water quality and flow regime, are examples of environmental impacts already related with similar works. The present study aims to investigate morphological and molecular variation of Cichlasoma orientale Kullander 1983 and Crenicichla menezesi Ploeg 1991, two cichlid species present in northeastern Brazil basins. Further, the study aims to evaluate the influence of geomorphological and climatic processes in this variation, and point some possible impacts of the artificial connectivity which can be brought by São Francisco interbasin water transfer to their population dynamics. Geometric morphometrics and phylogeographical analysis were used to investigate the populations from three different hydrological regions. Our results showed a significant morphological variation of populations from basins that are involved in the São Franscisco s diversion project, not related to an ancient separation between populations, emphasizing morphological variation which could represent a set of plastic responses to the variable hydrological regime in Northeastern Brazil. The role of plastical responses in naturally variable habitats as well as the potential disturbs that could be brought by the interbasin water transfer works are discussed here. Further, our molecular data allowed us to make inferences about species distribution and their taxonomy, and identification of a potential new species of Crenicichla for São Francisco river basin. Our data also allowed to identify some shared haplotypes for both species, which could be related to lineage sorting scenarios or recent gene flow between populations. However a strong structure in most of the pairwise comparisons between populations for both species was revealed. Climatic events such as Atlantic forest regression during the Pleistocene, sea level fluctuations and dispersion by paleorivers in the mouth of Apodi-Mossoró river, and neotectonic events regulating the connection between drainages are likely to have had a contribution for the actual lineages distribution in northeastern Brazil. Further, analysis of molecular variation (AMOVA and SAMOVA) showed that the actual basin s isolation is an important factor to molecular variation, in spite of the signal of recent contact between some basins. Different genetic diversity patterns between species could be related to multiple historic events of colonization, basins landscapes or biological differences. The present study represents the first effort of integrative systematics involving fish species of northeastern Brazil, and showed important morphological and molecular patterns which could be irrecoverably affected by the artificial connection that might be caused by the São Francisco interbasin water transfer

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this paper is to identify and analyze the main environmental impacts taking place in the permanent preservation areas located in the Ceará-Mirim River estuary/RN and its surrounding areas. For that, the study was divided in two chapters, structured in the shape of a scientific paper. The first is a theoretical proposition on the occupation of the APPs in light of the discussion of the geographic space and the sustainability of the development, where a bibliographical review was made emphasizing the production of the geographic space, the sustainability of the development and the permanent preservation areas. In the second chapter, from a systemic approach, geoprocessing techniques and the adaptation of the Pressure-State- Response Indicators System were used, the latter being developed by the Organization for Economic Co-operation and Development OECD. Therefore, from the methodological approaches used, it's been observed that the use of permanent preservation areas for purposes other than those determined in the legislation and, mainly guided by capitalist interests, leads to the environmental degradation of these areas, fact which has been confirmed in the empiric study conducted in the second chapter, where it was possible to identify a series of environmental impacts such as: deforestation of mangrove and riparian vegetation for carciniculture implantation, the devastation of dune areas caused by the urban expansion in the coastal stretch and siltation of fluvial channel

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Quilombo communities remaining are groups marked by insufficient public assistance and characterized by living in rural and conducting economic activities such as agriculture. The development on a sustainable basis is important to ensure strategies for economic growth and environmental preservation. This work aims to study the remaining Quilombo Capoeira Black community, located in the municipality of Macaíba, Rio Grande do Norte, considering the principles of sustainable development. Attempt to respond to what level such community can be considered sustainable from an analysis of their social practices. The methodological procedures used consisted of a literature review and documentary, questionnaires, conducting semi-structured interviews and direct observation. The final results show that the family farm has characteristics that approximate the principles of sustainable development, including the diversification of labor, food production with less environmental damage and strengthening the rural environment, and indicate that the main economic activities practiced in Capoeira dos Negros community are agriculture, manufacturing of cassava flour and brick manufacturing, which, in turn, are linked to negative environmental impacts, such as sedimentation pond, groundwater contamination, air pollution and soil erosion. What lead to the conclusion that the social practices of the community are not in line with the dimensions of sustainable development. It is hoped that the survey results provide subsidies for development and implementation of public policies