Estudo das variáveis de processamento das matérias-primas da região do crato - ce na fabricação de produtos cerâmicos por extrusão e por prensagem

The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Ceará state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT

Biomecânica e otimização topológica com H-adaptatividade em implantes dentários nitretados a plasma em cátodo oco

In recent years there has been a significant growth in technologies that modify implant surfaces, reducing healing time and allowing their successful use in areas with low bone density. One of the most widely used techniques is plasma nitration, applied with excellent results in titanium and its alloys, with greater frequency in the manufacture of hip, ankle and shoulder implants. However, its use in dental implants is very limited due to high process temperatures (between 700 C o and 800 C o ), resulting in distortions in these geometrically complex and highly precise components. The aim of the present study is to assess osseointegration and mechanical strength of grade II nitrided titanium samples, through configuration of hollow cathode discharge. Moreover, new formulations are proposed to determine the optimum structural topology of the dental implant under study, in order to perfect its shape, make it efficient, competitive and with high definition. In the nitriding process, the samples were treated at a temperature of 450 C o and pressure of 150 Pa , during 1 hour of treatment. This condition was selected because it obtains the best wettability results in previous studies, where different pressure, temperature and time conditions were systematized. The samples were characterized by X-ray diffraction, scanning electron microscope, roughness, microhardness and wettability. Biomechanical fatigue tests were then conducted. Finally, a formulation using the three dimensional structural topology optimization method was proposed, in conjunction with an hadaptive refinement process. The results showed that plasma nitriding, using the hollow cathode discharge technique, caused changes in the surface texture of test specimens, increases surface roughness, wettability and microhardness when compared to the untreated sample. In the biomechanical fatigue test, the treated implant showed no flaws, after five million cycles, at a maximum fatigue load of 84.46 N. The results of the topological optimization process showed well-defined optimized layouts of the dental implant, with a clear distribution of material and a defined edge

Análise de viabilidade técnica de utilização da Fibra de bananeira com resina sintética em Compósitos

This paper aims to present the feasibility of using a composite using discarded material from the cultivation of banana tree (pseudostem), which is fibrillated together with synthetic resin replacing glass fiber to be used in structural elements that do not demand large mechanical stress such as reservoirs, troughs, domes, sewage pipes etc.. For this, there were studies about the mechanical properties of a composite made with polyester resin and fiber of banana tree (Musa sp, musac), in which the splints were removed from the pseudostem, being made fibrillation by hand, with the aid of a brush steel, followed by natural drying. After treatment for cleaning and removal of wax, the fiber was cut into pieces of approximately 60 mm to 100 mm, for, together with synthetic resin, make cards of a features fiber composite with random orientation relative to the weight of the resin. We used three different percentages of fiber (3%, 6% and 9%), in order to make a comparative study between them and what would be the one with the best performance. Were manufactured specimens of each material and then subjected to uniaxial tensile tests, three point bending, moisture absorption and thermal characteristics. The results show that, in general, the use of banana tree fiber is feasible simply by an improvement in the production process (machining of the procedure) and greater care in the manufacture of parts

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Análise da sensibilidade do biodiesel B5 em frotas de transporte coletivo com motorização diesel

The aim of this study was investigate the consolidation of the biodiesel fuel used in (a) engines of urban and intercity bus companies, (b) a stationary engine. It was necessary to investigate and analyze, technologically, if the biodiesel fuels were presenting troubleshooting relative to wear of parts lied to fuel and to evaluate the consumption fluctuations of this fuel. The urban and intercity bus companies, localized in Natal, Rio Grande do Norte state, Brazil, had 41 and 12 vehicles, respectively. It were analyzed datasheet of each one vehicle during three years, since 2008 until 2010 and were interviewed the management of the maintenance team of bus companies relative to aspects concerning the substitution of the diesel fuel by the B5 biodiesel. The second aim of this study was visually inspect the wear of the parts directly lied to combustion process. For this reason, it was investigated a stationary engine, manufactured by Branco BD5, 5 HP of power, fueled by (a) diesel, (b) biodiesel B5, (c) biodiesel B20 and (d) diesel or biodiesel, both contaminated by distilled water. In this engine, its power utilizing biodiesel B5 versus diesel was lower about 5.2% and, in the investigated case of B20 versus diesel, it was lower around 11.5%

Estudo do potencial refratário de argilas sílico-aluminosas do Rio Grande do Norte

The segment of the structural ceramics industry is one of the most important to the economy of Rio Grande do Norte. The supply chain makes a total of 206 companies that are distributed in 39 counties, concentrated in three regional centers: Seridó Apodi / Assu and great Natal. The ceramic industry in the state is around 80 million pieces per month, with 50,186 million of these tiles, which makes the Rio Grande do Norte one of the largest manufacturers of product in the Country. Different ceramic products can be manufactured by mixing two or more clays and accessory minerals. Mixtures acquire characteristics and form what is called the ceramic body. Refractory masses have a high melting point and thermal shock support. Its composition contains refractory clays with a little iron oxide and material fluxes. A line of semi-refractory ceramic products that stands out for its high added value are the bricks in ivory or red, used in building barbecues, fireplaces, wood stoves and braziers. The aim of this study was to use alumina-clay or silica- alumina-clay to the industrial RN, for the production of refractory bricks semi-refractory burning light. Clay and Kaolin were characterized for their chemical and mineralogical composition, immediately after ceramic bodies were made with different concentrations of the components, they were raised, pressed and sintered. After sintering the resulting products were characterized in terms of mechanical, thermal and dimensional than the characterization by X-ray diffraction and scanning electron microscopy. After obtaining the results, we concluded that the studied clay can be used for the production of semi-refractory bricks

Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Nitrificação de efluentes de reatores anaeróbicos em filtros submersos aerados

Although the good performance in organic matter and suspended solids removal, the anaerobic reactors are unable to remove ammonia nitrogen from sewage, which makes indispensable to include a step of post-treatment for removal of ammonia or nitrate as necessary. This paper presents the performance of a new variant technology, where the nitrification unit, preceded by anaerobic units, is a submerged aerated biological filter, without continuous sludge discharge in their daily operation. The oxygenation system is very simple and inexpensive, consisting of perforated hoses and compressors. The anaerobic reactors are a septic tank with two chambers followed (8.82 m³) and two parallel anaerobic filters (36 m³ each) filled with ceramic bricks and conics plastic parts. Both followed aerated filters were filled with cut corrugated conduit. The study evaluated the behavior of the system with constant domestic sewage flow (10 m³/d) and different aeration conditions, are these: stage 01, when applied air flow of 0.01 m³ air/min in both aerated filter; stage 02, remained in the initial air flow rate in the second aerated filter and increased at the first to 0.05 m³ air/min; at last, at last, in stage 03, the air flow rate of first aerated filter was 0.10 m³ air/min and on the second remained at 0.01 m³ air/min. The filter FA1 received load of 0.41 kg COD/m³.d, 0.37 kg COD/m³.d and 0.26 kg COD/m³.d on phases 01, 02 and 03, respectively. The FA2 received loads of 0.25 kg COD/m³.d, 0.18 kg COD/m³.d and 0.14 kg COD/m³.d on phases 01, 02 and 03, respectively. During stage 01, were found the following results: 98% removals of BODtotal and 92% of CODtotal, with effluent presenting 9 mg/L of BODtotal final average and 53 mg/L of CODtotal average; suspended solids removals of 93%, with a mean concentration of 10 mg/L in the final effluent; 47% reduction of ammonia of FA2 to FAN 's, presenting average of 28 mg NNH3/ L of ammonia in the effluent with; the dissolved oxygen levels always remained around 2.0 mg/L. During stage 02, were found removals of 97% and 95% to BODtotal and suspended solids, respectively, with average final concentrations of 8 and 7 mg/L, respectively; was removed 60% of ammonia, whose final concentration was 16.3 mg NNH3/ L, and nitrate was increased to a final average concentration of 16.55 mg N-NO3/L. Finally, the stage 03 provided 6 mg/L of DBOtotal (98% removal) and 23 mg/L of CODtotal (95% removal) of final effluent concentrations average. At this stage was identified the higher ammonia oxidation (86%), with final effluent showing average concentration of 6.1 mg N-NH3/L, reaching a minimum of 1.70 mg N-NH3/L. In some moments, during stage 03, there was a moderate denitrification process in the last aerated filter. The average turbidity in the effluent showed around 1.5 NTU, proving the good biomass physical stability. Therefore, the results demonstrate the submerged biological filters potential, filled with high void ratio material (98%), and aerated with hoses and compressor adoption, in the carbonaceous and nitrogenous matter oxidation, also generating an effluent with low concentration of solids

Reúso de água no processamento de jeans na indústria têxtil

This study aims to assess the potential for industrial reuse of textile wastewater, after passing through a physical and chemical pretreatment, into denim washing wet processing operations in an industrial textile laundry, with no need for complementary treatments and dilutions. The methodology and evaluation of the proposed tests were based on the production techniques used in the company and upgraded for the experiments tested. The characterization of the treated effluent for 16 selected parameters and the development of a monitoring able to tailor the treated effluent for final disposal in accordance with current legislation was essential for the initiation of testing for reuse. The parameters color, turbidity, SS and pH used were satisfactory as control variables and presents simple determination methods. The denim quality variables considered were: color, odor, appearance and soft handle. The tests were started on a pilot scale following complexity factors attributed to the processes, in denim fabric and jeans, which demonstrated the possibility of reuse, because there was no interference in the processes and at quality of the tested product. Industrial scale tests were initiated by a step control that confirmed the methodology efficiency applied to identify the possibility of reuse by tests that precede each recipe to be processed. 556 replicates were performed in production scale for 47 different recipes of denim washing. The percentage of water reuse was 100% for all processes and repetitions performed after the initial adjustment testing phase. All the jeans were framed with the highest quality for internal control and marketed, being accepted by contractors. The full-scale use of treated wastewater, supported by monitoring and evaluation and control methodology suggested in this study, proved to be valid in textile production, not given any negative impact to the quality the produced jeans under the presented conditions. It is believed that this methodology can be extrapolated to other laundries to determine the possibility of reuse in denim washing wet processing with the necessary modifications to each company.

Remoção de nitrogênio em biofiltros aerado e anóxico, com alto índice de vazios e sem remoção de lodo

The improper disposal of nitrogen in receiving water courses causes problems such as toxicity to living beings through the consumption of oxygen to meet the nitrogen demand, eutrophication and nitrate contamination of aquifers. For this reason it is often necessary to be carried out complementary treatment of wastewater to eliminate or reduce the concentration of this compound in the wastewater. The objective of this study is to evaluate the biological removal of nitrogen compounds using submerged aerated and anoxic filters as post-treatment of an anaerobic system, with low cost and innovative technology, which in previous studies has shown high removal efficiency of organic matter and great potential biological nitrogen compounds removal. The simple design with perforated hoses for air distribution and filling with plastic parts proved to be very efficient in relation to organic matter removal and nitrification. The system presented, in the best stage, efficiency in converting ammonia to nitrate by 71%, and produced a final effluent concentration below 10 mg / L of NH3-N. In addition, carbon concentration was removed by 77%, producing final effluent with 24 mg/L COD. However, denitrification in anoxic filter was not effective even with the addition of an external carbon source. There was a reduction of up to 56% of nitrogen caused by the process of simultaneous nitrification and denitrification (SND). The high voids space presented by this type of support material coupled with direct aeration of the sludge, allows the respiration of biomass retained between the endogenous phase, increased cell retention time and sludge retention capacity, producing a final effluent with turbidity less than 5 UT and total suspended solids around 5.0 mg/L

A argumentação na petição inicial

This research investigates current sense effects at the use of linguistic resources of the argument in a corpus constituted by juridical pieces (Initial Petitions), that gave opportunity to actions originated from the Civil Special Court of the District of Currais Novos-RN. For this purpose it was established a relation between the Law and the Linguistics, mediated by the focus of the Argumentative Semantics, emphasizing, in a special way, the use of argumentative operators, which inserted in the own language, in its grammar, assume the orientation of the speech and the modalizers use, important mechanisms in the construction of the sense of the text and in the signalling in the way as that that one say is said,. This way, we began the investigation of that gender choosing as study object the section of the facts , that comprehends a part of Initial Petition where is explanted the narration of events that gave margin to the proposal for the Action. In face of the study object and the aim to be reached it was appealed, methodologically, to the notion of Rhetoric since from the classic antiquity to the emergence of the New present Rhetoric in Perelman and Olbrechts-Tyteca (2005) that, at the present time, is inserted in the studies of the Pragmatic connected to the central theses of the Ducrot s thinking (1977, 1980, 1987). Such referential allowed us to a better understanding about the production of the juridical speech on the part of the operators of the Law, as well as, to analyze in way wide the current sense effects from the use of argument linguistic marks the juridical speech. The data showed that such marks are indispensable elements to the construction of the textual web, particularly when in the range of the juridical argumentation, since they direct the speech for certain conclusions. However, we have observed that in the texts produced by the lawyers the use of those linguistic resources not always takes place in an appropriate way. The texts analyzed have also showed that it is possible to unmask, through the linguistic resources, the argumentative strategy employed by the authors for convincing of the magistrate, making evident that language is more than a system of signs, which it makes possible to see beyond the limit of the words and statements. Finally, we have verified that the categories analyzed, when used appropriately, are elements that engender argumentative maneuvers of effectiveness in the juridical text, being fundamental pieces which give argumentative strength the text, making the speech to move forward, not only the juridical, but the speech produced in any domain of the knowledge

Uma história de vida e uma vida de histórias: memória e oralidade no Romanceiro de Dona Militana

Este estudio trata de establecer relaciones sobre la importancia del fenómeno sociocultural que emerge de Doña Militana para la cultura potiguar. Para tanto tomamos sus recuerdos de los romances como parte de un contexto social, relacionados con el tiempo y el espacio, que afecten a la vida material y moral de su grupo social. Resaltamos, por lo tanto, el fenómeno de la memoria individual en su relación con la memoria colectiva. Proponemos, en este sentido, suponer que el mantenimiento y permanencia de estos romances en la memoria de la romancera revelan una dinámica de su grupo social para la formación de su identidad. En este sentido, nos servimos como referencial teórico de los estudios de Maurice Halbwachs, en lo que respecta a los debates sobre la memoria colectiva, en paralelo a los estudios de Paul Zunthor cuando se trata de las funciones de la oralidad para la formación de la identidad. Para llevar a cabo los trabajos es de fundamental importancia, por supuesto, el relato de vida de la propia Doña Militana en confronto con los simbolismo culturales contenidos en los romances, con el objetivo que flagremos las (co)incidencias que demarquen la identidad de sus vínculos de identidad con el universo cultural en que está insertado. Como resultado, se tomó como objeto de análisis desde la deposición presentadas en las entrevistas, hasta los romances en sus aspectos poéticos, lingüísticos y mitológicos, incluyendo los significados que el desempeño de la romancera muestra. Objetivamos, por lo tanto, una comprensión dialógica de la relación entre la memoria individual (el caso de Doña Militana) con la memoria colectiva, sobre la base de un hipotético concepto que subyace a la aparente singularidad de este fenómeno - un hecho aislado en cierta medida - una razón intrínseca y compleja que se revela como la punta de un iceberg, al que convergen motivos históricos inconscientes de un patrimonio cultural

Do teatro Elisabetano ao sertão do século XIX: a presença de Shakespeare em Inocência

The Shakespearean theater is a result of the genius of this playwright alongside the material provided by the period in which they came out the Elizabethan Age. Most of his works bring up themes and elements which keep them up-to-date, arousing an ongoing interest of readers and theatergoers, and also serving as inspiration for other writers to create their own works. Taking these ideas into account, this work aims to bring up questions concerning the presence of Shakespeare in a nineteenth-century Brazilian novel, Inocência, by Viscount of Taunay. In this novel, Taunay makes references to this playwright, using some epigraphs taken from Romeo and Juliet, from which we seek to understand how the novel dialogues with this Shakespearean drama. In order to develop such a study, we take into account some theoretical assumptions of hypertextuality, as proposed by the French scholar Gerard Genette, whose ideas about the dialogue between literary works support the analysis of the relationship between Taunay s novel and the above-referenced play of Shakespeare.

A criança e a cidade: as transformações da infância numa Natal moderna

The first years of the twentieth century in Natal is characterized by several urban interventions that aim was to change the feature of the city basically rural to another that was in line with cities as models of modernity and civilization. In this case all individuals would have to play important social roles, which included men, women and especially children. It was in this atmosphere of bright future that the children were taken as key parts of an idealized society. Some processes were essential in triggering changes in natal s childhood, among them, operated within the families, that this historic moment in public life sought other possibilities of existence, the school education and the construction of which would be the model for urban education the School Groups, propagators of science as mediators of all knowledge, and finally, the medical interventions that disseminating health and hygiene practices has enabled not only the conservation of child life, but also the possibility of building their individuality in a body healthy. If these processes on the one hand tried to crystallize an ideal image of a child making a child identity directly linked to education and the "body hygiene" on the other, giving specific reflexive autonomy to children, providing them see the world through eyes of subject.

A coleção mossoroense e a construção dos mitos: Dix-Sept Rosado, o herói imolado

This research comprises a study on the values and ideals attributed to Dix-sept Rosado, by the Coleção Mossoroense journal. Local researchers demonstrate how the Coleção Mossoroense constructs an image of Mossoró, forming in the members of the city an identity with the place, a social cohesion or creating one forms to see and to say about the Mossoró city. The Coleção Mossoroense, through Vingt-un Rosado together with its family, established a form of seeing and identifying of the Mossoró s population with the city, just because it associated and it was, at the same time, a movement at the same time social (civic parties for example), political (the domination of the Rosado s family) and cultural (the books and theatrical parties about the city). The conjunction of the Coleção Mossoroense as and with a social movement, cultural and political was capable to establish a social identity, a subjective constituent . With this background, it was possible to make a study of the image attributed to Dix-sept Rosado, by the Coleção Mossoroense, through an analysis of the inherent discourse in the works by Bakhtin (1989) and Bourdieu (2000), of and on Dix-sept Rosado in the Coleção Mossoroense based on. The image of Dix-sept Rosado was constructed by the Coleção Mossoroense after its death, and the responsible for this was Vingt-un Rosado, which was the chief-editor of the Coleção Mossoroense up to 2006, year of its death. The Coleção Mossoroense built an image of Dix-sept Rosado as an enterprising man, progressive and innovator, of great capacity of leadership and oratory (a conductor of the crowds ), popular and charismatic, an honest and dynamic politician. This image made by the Coleção Mossoroense, although when enhancing in surplus the qualities of Dix-sept Rosado have as objective to transmit an image of a heroic personage, it has some relation with the reality. Dix-sept Rosado was a man identified with its locality. This can resemble a regional nationalism. The attitudes of Dix-sept Rosado must be understood inside of a broader social context, of a time marked by the populist politics. Qualities also appreciated and developed inside of a specific historical context and determined both national and locally. The Coleção Mossoroense enhances the qualities of Dix-sept Rosado so that the current politicians of the Rosado s family can establish a link of continuity in its contemporary political practice