Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Subsídios para o projeto de estruturas sismo resistentes

Through this research is detailed the Brazilian seismic code focused on concrete projects design related to seismic engineering. At the beginning of the research is debated the fundaments of the seismic effects, the influence factors to the development of seismic effects and also relates the main data registration happened in Brazil. The second step is study the Brazilian seismic code explaining all the concepts related to it and does a compilation to the most important international seismic code. At this research is developed the designing of a building submitted to horizontal equivalent seismic forces and the modal process based on the answer spectrum based on the brazilin seismic code. It was also developed the design of a commercial building submitted to seismic loads based on the Brazilian code answer spectrum and compared to the same building submitted to wind loads.The research also focus on projects conception and detailing of seismic engineering Project design. At the study of seismic engineering it was concluded that seismic effects require special focus on concrete structures design, proving that is the essential consider the seismic effects

Ergonomia e Odontologia: determinantes da postura corporal dos estudantes da clínica-escola de uma Universidade Federal

Posture is one of the most worrying problems dentists face. That is because of the high incidence of low back pathologies regarding the professional activity, despite the development on the field of Dental Ergonomics. This work took place at the dental schoolclinic at a Federal University, and it was grounded on the Ergonomic Principles in the workplace. Its main objective was to analyze the determinants of inadequate posture adopted by students inasmuch as the adoption of non ergonomic methods at the school-clinic may influence them to develop inadequate postures in their working environment. The analysis of the activity showed us that it requires some complex procedures in the patient s mouth. Thus, when the students carry out the activity, they start to adopt, although unconsciously, inadequate postures which will make easier the visual accuracy and the access to the operation focus. In case there is no internal (body awareness) or external warning mechanisms (the professor s or the partner s counseling) regarding posture or possible risks which lead them to self-correction, the students become vulnerable to osteomuscle disorders. The time pressure, because the students are expected to perform their task in a predetermined clinical time. The facts related to each patient s variability as well as the stress caused by the expectations to get their work done in time make the students to advance it believing they will waste time if they help their partners or using an indirect view. We could also notice that there was no assistant to perform the job of minor ones, as well as there was no professor who could actually connect the knowledge on Ergonomics to its working practice. The conclusions of this work stand out the need of widen the discussion at the academic environment regarding health professionals in places such as universities. The ergonomic principles in the workplace aim a multidisciplinary analysis based on the experience of students, professors, staff members and janitors that can contribute to some reflection upon the issue and consequently actions which will bring positive changes at the working environment

Doenças sem doentes: Ocorrência de Distúrbios Osteomusculares Relacionados ao Trabalho DORT nos operadores de caixa de um banco

The changes incurred in the financial system with the introduction of new technologies and new forms of administration of banks has caused impact on the health of workers. These changes, which passed in the process of work, generate a combined share of the risk factors that result in numerous injuries and illnesses among banks, notably between the operators of banks tellers. The Work-Related Musculoskeletal Disordes - WRMD represent a group of occupational diseases always present among these workers. Because of its high incidence and the amount of financial resour envolved to manage the problem has been the object of constant study. This paper aims to analyze the bank teller activity; search the occurrence of WRMD in the activity, identifying the factors determining the occurrence of WRMD in the activity and determine the real number of touchs on a keyboard made by the operator and propose solutions that influence the reduction of illness in the workplace of the bank teller. Methodological tools of ergonomics are used to provide a broad knowledge of aspects of work that have been studied and influential in the generation of occupational diseases studied. It was found that activity put workers to serious risk of occupational diseases. As the main contributory factors and determinants for this illness: the requirements and control the numbers daily endorsements; evaluation system based on performance targets for productivity; management system at time of service to customers; work with stressful factors (broken box); excess of time worked; furniture of workstations with ergonomic inadequacies and policy for the prevention of occupational diseases inefficient. They have also noted cases of illness for DORT workers without fulfilling the legal requirement of the issuance of the communication of labour accident and without the removal of the employee of the workplace

Análise da situação de trabalho do motorista em uma empresa de ônibus urbano da idade de Natal (RN)

The problem dealt with in this study concerns the analysis of bus drivers' working situation. It stemmed from the need to identify the difficulties faced by these professionals in accomplishing the results expected by the company. A case study was carried out in a public transportation company in the city of Natal. Records and observations made in the workplace, alongside perfomance indicators, such as absenteeism tax, staff turnover and traffic accidents, revealed problems in their activity. It was made clear that, in the company being studied, absenteeism was related to health problems, particularly psychiatric and musculoskeletal disorders, and that although the indicators of traffic accidents and staff turnover have declined over the years, they are still elevated. The interviews involved 50 of the 124 drivers who worked directly in the service, and contained questions covering eleven factors related to the drivers' work. They indicated a gap between the prescribed work and the work actually done, in that there were a series of embarassing or stressful situations involving traffic, itinerary length, road conditions, vehicle maintenance, physical environment (bus terminus), job post and supervision policies. On the other hand, factors such as enjoying driving, the work itself and being with workmates positively influenced the drivers' working conditions. In the propositions of the administration and human resources subsystems, some alternatives were found in order to remodel this activity

Desenvolvimento de um sistema de indicadores de desempenho para empreendimentos em construção civil, utilizando a abordagem macroergonômica

This paper presents the validation of the Performance Indicator System for Projects under Construction - SIDECC. The goal was to develop a system of performance indicators from the macroergonômica approach, considering criteria of usefulness, practicality and applicability and the concept of continuous improvement in the construction industry. The validation process SIDECC consisted of three distinct models. Modeling I corresponded to the theoretical development and validation of a system of indicators. Modeling II concerns the development and validation of multi- indicator system. For this modeling, we used the Mother of Use and Importance and Multivariate Analysis. Modeling III corresponded to the validation situated, which consisted of a case study of a work of construction of buildings, which were applied and analyzed the results of modeling II. This work resulted in the development of an applied and tested for the construction of an integrated system of performance indicators methodology, involving aspects of production, quality, environmental, health and safety. It is inferred that the SIDECC can be applied, in full or in part, the construction companies as a whole, as well as in other economic sectors

Análise e classificação de imagens de lesões da pele por atributos de cor, forma e textura utilizando máquina de vetor de suporte

The skin cancer is the most common of all cancers and the increase of its incidence must, in part, caused by the behavior of the people in relation to the exposition to the sun. In Brazil, the non-melanoma skin cancer is the most incident in the majority of the regions. The dermatoscopy and videodermatoscopy are the main types of examinations for the diagnosis of dermatological illnesses of the skin. The field that involves the use of computational tools to help or follow medical diagnosis in dermatological injuries is seen as very recent. Some methods had been proposed for automatic classification of pathology of the skin using images. The present work has the objective to present a new intelligent methodology for analysis and classification of skin cancer images, based on the techniques of digital processing of images for extraction of color characteristics, forms and texture, using Wavelet Packet Transform (WPT) and learning techniques called Support Vector Machine (SVM). The Wavelet Packet Transform is applied for extraction of texture characteristics in the images. The WPT consists of a set of base functions that represents the image in different bands of frequency, each one with distinct resolutions corresponding to each scale. Moreover, the characteristics of color of the injury are also computed that are dependants of a visual context, influenced for the existing colors in its surround, and the attributes of form through the Fourier describers. The Support Vector Machine is used for the classification task, which is based on the minimization principles of the structural risk, coming from the statistical learning theory. The SVM has the objective to construct optimum hyperplanes that represent the separation between classes. The generated hyperplane is determined by a subset of the classes, called support vectors. For the used database in this work, the results had revealed a good performance getting a global rightness of 92,73% for melanoma, and 86% for non-melanoma and benign injuries. The extracted describers and the SVM classifier became a method capable to recognize and to classify the analyzed skin injuries

Efeito da adição de diatomita no comportamento reológico e mecânico de argamassas colantes

The mortar is a type of adhesive products used in large scale in construction, it is a function of its variety and ease of application . Although industrialized product and endowed with technology in its production is very frequent occurrence of the same pathology , which causes frequent damage and losses in the construction industry. Faced with this real market situation , the technical and scientific study of the effects of the addition of diatomite on the rheological and mechanical behavior of adhesive mortars are needed. This work back as a suggestion the use of diatomite as a mineral additive in formulations of adhesive mortars for partial replacement of cellulose based additives . The choice of using this mineral occurs through physical, chemical and rheological properties that justify its use in this product line , and is a raw material abundant in our region and can thus contribute positively to the minimization of direct costs cellulose -based additives . Industrial adhesive mortar used for comparison , was type AC1 . Formulations of adhesive mortar with diatomite held constant dosed quantities of sand, cement and the water / cement (w / c ) , or adhesive mortar formulations were developed with levels 10, 20, 30 and 40% of diatomite substituting part of the cellulose -based additives . These mortars were subjected to the following tests that define and evaluate the rheological and mechanical behavior of this type of mortar. The results attest the best performance of the adhesive mortar type AC1 with partial replacement of 30 % of the cellulose-based additive for diatomite

Controle sanitário e ambiental de um projeto de reúso em um complexo de prédios corporativos

The study that resulted in this dissertation was developed at OU RNCE PETROBRAS, in Natal, which implemented a project of rational use and reuse of water, including use of wastewater from a Sewage Treatment Plant (STP) already in place, diluted with water from own wells for irrigation of green area of the building complex corporate enterprise. Establish a methodology that can serve as guidelines for future projects controlled reuse of water like this was the objective of this research. Been proposed, implemented and evaluated three instruments of sanitary and environmental control: 1) adaptation of sewage treatment plant and quality control of the treated effluent 2) analysis of soil-nutrient interaction in the irrigated area, 3) knowledge of the local hydrogeology, especially with regard to the direction of flow of the aquifer and location of collection wells of Companhia de Águas e Esgotos do Rio Grande do Norte (CAERN) situated in the surroundings. These instruments have proven sufficient and appropriate to ensure the levels of sanitary and environmental control proposed and studied, which were: a) control of water quality off the STP and the output of the irrigation reservoir, b) control of water quality sub surface soil and assessment of progress on soil composition, c) assessment of water quality in the aquifer. For this, we must: 1) establishing the monitoring plan of the STP and its effluent quality sampling points and defining the parameters of analysis, improve the functioning of that identifying the adequacy of flow and screening as the main factors of operational control, and increase the efficiency of the station to a relatively low cost, using additional filters, 2) propose, implement and adapt simple collectors to assess the quality of water percolating into the soil of the irrigated area, 3) determine the direction of groundwater flow in the area study and select the wells for monitoring of the aquifer.

Bairro Planalto, Natal-RN: agentes, usos e conflitos

This research has the goal to analyze the urban setting of the Planalto neighborhood, in Natal /RN, seeking to unravel the processes, agents and contradictions associated with the production of the space. The choice of neighborhood is justified by the observation that changes in its urban setting have been growing in speedy way. We highlight the performance of the housing market, in partnership with the state, and the construction of condominiums and buildings closed by the housing program Minha Casa, Minha Vida. This has favored the reproduction of a new " urban reality in the neighborhood, setting an urban standard that differs from the original morphology, seen as peripheral within the urban dynamics of the city. The research is a qualitative study, through documents, interviews with stakeholders, and photographic documentation. In this perspective , we seek to understand the current phase (2000s) the production of space in the neighborhood process through the development of the housing market , as an extension of the urban development in central zone of Natal/RN, analyzing the performance of agents and their producers the "new " uses redefining the "old ". Thus, it can be seen that there is in the neighborhood, urban reality in a pluralistic constitution, from the existence of different social classes inhabiting the same space. On this way, the city is produced from the appropriation of space by different social classes, although due to the economic condition of each of them

Influência da adição de carga na marcha em esteira de crianças com paralisia cerebral hemiparética espástica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Comparação das respostas fisiológicas entre diferentes testes funcionais em obesos

obesity affects rightly functional capacity diminishing the cardiovascular system efficiency and oxygen uptake (VO2). Field tests, such as, Incremental Shuttle Walking Test (ISWT) and Six Minute Walk Test (6MWT) has been employed as alternative of Cardiopulmonary Exercise Test (CPX), to functional assessing for conditions which transport of oxygen to peripheral is diminished. Nevertheless, the knowing about metabolic variables response in real time and it comparing among different maximal and submaximal tests in obese is absent. Aim: to compare cardiopulmonary, metabolic response during CPX, ISWT and 6MWT and to analyse it influence of adiposity markers in obese. Material e Method: crosssectional, prospective study. Obese included if: (BMI>30Kg/m2; FVC>80%), were assessed as clinical, anthropometric (BMI, body adiposity index-BAI, waist-WC, hip- HC and neck-NC circumferences) and spirometry (forced vital capacity-FVC, Forced expiratory volume-1°second-FEV1, maximal voluntary ventilation-MVV) variables. Obese performed the sequence of tests: CPX, ISWT and 6MWT. Throughout tests was assessed breath-by-breath by telemetry system (Cortex-Biophysik-Metamax3B) variables; oxygen uptake on peak of activity (VO2peak); carbon dioxide production (VCO2); Volume Expiratory (VE); ventilatory equivalents for VO2 (VE/VO2) and CO2 (VE/VCO2); respiratory exchange rate (RER) and perceived effort-Borg6-20). Results: 15 obese (10women) 39.4+10.1years, normal spirometry (%CVF=93.7+9.7) finished all test. They have BMI (43.5+6.6kg/m2) and different as %adiposity (BAI=50.0+10.5% and 48.8+16.9% respectively women and men). Difference of VO2ml/kg/min and %VO2 were finding between CPX (18.6+4.0) and 6MWT (13.2+2.5) but not between ISWT (15.4+2.9). Agreement was found for ISWT and CPX on VO2Peak (3.2ml/kg/min; 95%; IC-3.0 9.4) and %VO2 (16.4%). VCO2(l/min) confirms similarity in production for CPX (2.3+1.0) and ISWT (1.7+0.7) and difference for 6MWT (1.4+0.6). WC explains more the response of CPX and ISWT than other adiposity markers. Adiposity diminishes 3.2% duration of CPX. Conclusion: ISWT promotes similar metabolic and cardiovascular response than CPX in obese. It suggesting that ISWT could be useful and reliable to assess oxygen uptake and functional capacity in obese

Em nome(s) dos interesses: imaginários toponímicos do Rio Grande do Norte na Primeira República

This paper has the imaginary names as a theme, from which we aim to analyze the imaginaries and invested interests that characterized the implementation and the legitimation of the First Republic in Rio Grande do Norte (1889 1930), making the process of registering names history in that place. For the construction of our object, we studied laws and provincial, state and municipal decrees; annual messages of governors; articles of the following newspapers O Povo, A República, Diário do Natal, O Seridoense, A Notícia and Jornal das Moças; the local cartography and historiography that talk about the study of names. The use of these resources, allied to the empiric method, was driven by a theoretic methodological contribution based on the history of the political imaginary, as discussed by Cornelius Castoriadis, René Rémond, Michel de Certeau and Maria Dick. For the understanding of the imaginaries that (de)limited the spaces of Rio Grande do Norte concerning its names during the First Republic, we bring moment back to the two last imperial decades moment of cleavage between Empire and Republic essential for the fomentation of the imaginary that embodied the organization of our study. From this period, we observe, through the names of some cities, how the northern space would be aligned to the imaginary dynamic of the new political system of the nation, and it had followed to a redirection process of the giving names action, according to the interests of the family organization Albuquerque Maranhão, revealed while determining the names of cities, towns, streets, schools, buildings, etc., in thankfulness to the memory of its members. In the sequence we verified how a new dynamic of giving names helped to understand the process of political transition from the Coast to the Sertão, and at the same time affirmed the power of the political and economical seridoense elite towards the government of the state in the two last decades of the First Republic

Vicus Judæorum: os judeus e o espaço urbano no Recife neerlandês

This work broaches the participation of the Jewish community in the urban expansion of Recife, Brazil, during the Dutch period (1630-1654). With the arrival of the Dutch, the village of Olinda, former capital of Pernambuco, was destroyed and Recife received the juridical statute of city (stad), becoming the capital of Dutch Brazil or New Holland. It became the main West Indians Company s entrepot in South Atlantic, serving as naval base, port of call for ships, and point of export of the sugar production of Pernambuco, and import of European goods and African slaves. In order to such administrative, military and economic functions be carried out, the sand isthmus where Recife used to stay, and the fluvial island of Antônio Vaz, received improvements of many sort. The Dutch hydraulic technology was put in practice, with a posture of opposition between civilization and nature. Among military works and production of urban equipments, the rivers shores were land-filled, canals were built, bridges were lifted, and hundreds of buildings were erected. The civil Dutch population of Recife engaged in the process of production of physical space, which brought a sense of collective action towards the formation of the urban, or burgher, community. From the physical to the social space, there was an effort towards Dutch cultural standards in the urban environment. The Zur Israel Jewish community, formed by private civilians, it is, nonemployees of the WIC, engaged in those processes. It produced physical space through the land-filling and improvement of non healthy areas, and was also responsible for the construction of a significant section of the town s buildings and some of urban equipments, such as stores, markets and slave-warehouses, making more dynamic their economical activities. But their social traffic was due to the adaptation of their behavior to the standards of Dutch sociability. Thus, the community body made itself part of the social body. Disposing of internal selfregulation, it produced spaces with their cultural references cemetery, synagogue, texts enjoying benefits of the government. Zur Israel inscribed itself in the universal history of the Jews as the first community of Americas, and had a fundamental part on the emancipation of Jews within Western society

Avaliação microscópica dos fragmentos ósseos obtidos por diferentes métodos de osteotomia e de irrigação em aloenxertos irradiados e congelados de coelho

Oral and facial bone defects can undertake appearance, psychosocial well-being and stomathognatic function of its patients. Over the yerars several strategies for bone defect regeneration have arised to treat these pathologies, among them the use of frozen and irradiated bone allograft. Manipulation of bone grafts it s not determined yet, and several osteotomy alternatives can be observed. The present work evaluated with a microscope the bone fragments obtained from different osteotomy methods and irrigation on rings and blocks allografts irradiated and frozen at 80° negative in a rabbit model. The study is experimental in vitro and it sample was an adult male New Zealand rabbit. The animal was sacrificed to obtain long bones, that were submitted to freezing at 80º negative and irradiated with Cobalt- 60. Then the long bones were sectioned into 24 bone pieces, divided into 4 groups: G1 (n=06) osteotomy was performed with bur No. 6 forming rings with 5 mm thickness with high-speed handpiece with manual irrigation; G2 (n=06) osteotomy was performed with bur No. 6 forming rings with 5 mm thick with surgical motor with a manual irrigation rotation 1500 rpm; GA (n=06), osteotomy with trephine using manual irrigation with saline; and GB (n=06), osteotomy with trephine using saline from peristaltic pumps of surgical motor. Five bone pieces of each group were prepared for analysis on light microscopy (LM) and one on electronic scan electronic microscopy (SEM). On the SEM analysis edges surface, presence of microcracks and Smear Layer were evaluated. Analyzing osteotomy technics on SEM was observed: increased presence of microcracks cutting with high speed; increased presence of areas covered by Smear Layer when cutting with motor implant. The irrigation analysis with SEM was observed: that the presence of microcracks does not depend on the type of irrigation; on manual irrigation, there was greater discrepancy between the cutting lines. The descriptive analysis of the osteotomy and irrigation process on LM showed: histological analysis showing the bony margins with clear tissue changed layer, composed of blackened tissue of charred appearance near to the cortical bone; on the edges of the bony part, bone fragments that were displaced during the bone cut and bone irregularities were observed. After analysis of results we can conclude: that there was greater regularity of the bone cut using high-speed handpiece than using motor implant; the cut with trephine using saline irrigated from peristaltic pumps of surgical motor showed greater homogeneity when compared with manual irrigation; charred tissue was found in all obtained bone samples, whit no significant statistically difference on the proportion of carbonization of the two analysed technics