82 resultados para Pós-vendas
Resumo:
It is an exploratory and descriptive study made by a quantitative approach, developed among February and May 2010, aiming to assess the pain of patients underwent abdominal surgeries in a University Hospital, in Natal/RN; to identify the local and intensity of the pain based on Numerical Estimative Scale; to analyze the pain related to the sensorial-discriminative, motivational-affective and cognitive-assessment dimensions, using the McGill Questionnaire pain; to establish a relation between the pain process and age, gender, religion, and king of surgery; to identify the medicines efficiency used to control postoperative pain. The sample was composed by 253 patients underwent abdominal surgeries. The results showed a total of 63.63% females between 38 and 47 years of age (21.34%); illiterates (21.73%); married (64.03%), living in Natal and surroundings (67.97%) and Catholics (74.30%). In their first assessment, 84.19% showed postoperative pain; the pain was considered light in 18.97% of them, moderate in 21.74% and severe in 43.48%. The mean number of descriptors chosen through the McGill Questionnaire Pain was 10.78 (DP= 6.09) and pain rating 23.65 (DP= 15.93). The descriptors selected with higher frequency were: sickening pain (69.01%), tired (65.25%), thin (62.44%), bored (58.69%), ardor (46.48%), pointed (38.50%) and colic (35.21%). In their second assessment, 57.71% of patients didn t relate any postoperative pain and 42.29% were still complaining about the pain. After taking analgesic medication, just 41.90% of patients who had complete pain relief. The Pharmacological groups most used were: simple analgesic (37.86%), weak opioids (32.98%), AINES (19.85%) and strong opioid (9.31%). It was not found a significant postoperative pain variation related to the sexes, religion and kind of surgery. It was concluded there were a high level in the number of patients with postoperative pain, mainly in a severe scale. Less than half of patients had the pain relief. Then, it was observed there was not coherence between the pain intensity and the analgesic it was used. To solve or relieve this kind of problems is necessary a permanent education to the health professionals who works in this area
Resumo:
The characterization of the nursing diagnoses in prostatectomized patients is important to provide an unique nursing language, facilitating the communication between professionals and patients. The objective of this study was to analyze the nursing diagnoses of patients in the immediate prostatectomy postoperative period. This is a cross-sectional and descriptive study, developed at the surgical-clinic of Onofre Lopes University Hospital, in the Natal City RN - Brazil. The sample was composed of 50 patients included by the criteria: have presented a diagnosis of a benign prostatic hyperplasia or a prostate cancer, have been subjected to a prostate surgery at the mentioned hospital, and have been in the immediate postoperative period at the moment of the data collection. The exclusion criteria were: haven t been in an appropriate physical and mental condition, have presented a brain vascular disease, a lung disease, an advanced liver disease, a heart disease or a extensive coronary artery disease. The data collection instruments were: the script of an interview and physical examination. The data collection period was between November 2010 and April 2011. The data were organized in two phases: the diagnostic process and the construction of the database. The project was approved by the Ethics Committee of the Federal University of Rio Grande do Norte The results showed that most patients came from the countryside, was living with partners, had an average of 67.78 years, was pensionerthose with low schooling, Catholic and often did not perform preventive examinations of prostatic disease. The patients showed an average of 9.48 nursing diagnoses, defining characteristics 21.70 and 20.72 related or risk factors per patient. We identified 30 nursing diagnoses, of which 7 were above the 75 percentile: Risk of falls, Impaired ambulation, Risk of infection, Self-care deficit bath / hygiene and dress up and Risk for deficient fluid volume. The top six nursing diagnoses were in all patients, and therefore could not apply any statistical test. The others ND were associated with their defining characteristics and related or risk factors. We conclude that the nursing diagnoses identified in this study contribute to the progress of the nursing care to the prostatectomized patients in post-surgery period, allowing the deployment of nursing actions for the effective resolution of identified problems
Resumo:
Exploratory descriptive study, prospective with quantitative approach, performed in the nefrology outpatient service from the Onofre Lopes University Hospital (HUOL), Natal/RN, aiming to identify aspects that concern Quality of Life (QOL) on transplanted and hemodialysis patients, as measured by WHOQOL-bref and describe the aspects that differentiate QL between the two groups as measured by the same instrument. The population was of 62 renal patients in hemodialysis and 58 transplantd, with data collected from february to march 2006. The instrument used was WHOQOL-bref, translated to and validated for Portuguese by the multicentric group of the World Health Organization (WHO) in Brazil. The results show predominance of the masculine gender both in the post-transplant group (55,17%), as well as in the hemodialysis group (51,61%); the age strip of 28 to 43 prevailed, among which were 53,45% transplanted and 48,99% hemodialysis patients; 79,93% of the hemodialysis patients and 62,07% of the transplanted were provenient from ouside the capital of the state; from the hemodialysis population, 59,68% were married, while among the transplanted 48,28% were single; 58,06% of the hemodialisys patients had 1 to 3 children, while the majority of the transplanted, 44,83%, had no children; regarding scholarity level on both groups, there was a predominance of incomplete fundamental school, representing 62,9% of the hemodialysis patients and 46,6% of the transplanted; regarding work status, 98,39% of those in hemodialysis informed not to be working, and the same applied to the transplanted, with 75,86%; regarding treatment time, most patients of both populations were in the 1- to 4-year interval, of which were 62,9% of the hemodialisys patients and 53,45% of the transplanted. The analysis of WHOQOL-bref reliability through Crobach s Alpha coefficient had a value of 0,8816, demonstrating good internal consistency for the instrument. Regarding description of QOL tests, the average scores of the post-transplant were (Q-1) 18,14 e (Q-2) 18,69, and 12,3 (Q-1) and 11,29 (Q-2) for the group in hemodialisys. Regarding the aspects that differentiate QOL on the two groups observed through average scores from the Domains: Physical, 15,91 for the post-transplant group and 12,71 for the hemodialisys group; Psychological, 16,75 for the post-transplant group and 14,84 for the hemodialisys group; Social Relations, 17,79 on the post-transplant group and 16,58 on the hemodialisys group; Environment, 14,16 on the post-transplant group and 12,38 on the hemodialisys group. On every evaluated item, the post-transplant group achieved higher scores when compared to the hemodialisys group. The diference in QOL for both populations was significant on all items evaluated with a p<0,005
Resumo:
A presente pesquisa teve como objetivo analisar as transformações do cotidiano profissional do enfermeiro do hospital universitário após a realização do curso de mestrado. Trata-se de um estudo com abordagem qualitativa, realizado no Complexo Hospitalar Universitário da UFRN, composto pelo Hospital Universitário Onofre Lopes (HUOL), Maternidade Escola Januário Cicco (MEJEC), e Hospital de Pediatria Professor Heriberto Ferreira Bezerra (HOSPED) localizados em Natal-RN; e pelo Hospital Universitário Ana Bezerra (HUAB) situado em Santa Cruz-RN. A população foi composta por vinte e dois enfermeiros, com título de mestre em enfermagem, que trabalham nessas instituições. Após encaminhamento e aprovação pelo Comitê de ética em pesquisa, conforme Parecer nº 268.498 e CAAE: 13922713.1.0000.5537, as entrevistas foram iniciadas, utilizando-se um roteiro semiestruturado, organizado em questões orientadas em conformidade com os objetivos do estudo. Do material empírico, emergiram as categorias que foram trabalhadas com base na análise de conteúdo temática, tendo como aporte teórico os estudos de Agnes Heller acerca do cotidiano e os de Paulo Freire sobre educação e mudanças, buscando a possível interlocução entre esses autores. Os resultados demonstram que o cotidiano dos enfermeiros nos hospitais universitários, após cursarem o mestrado, modifica-se a partir da própria motivação em cursálo e do apoio institucional recebido. As continuidades e rupturas apontadas estão distribuídas nas categorias: a inércia da cotidianidade, na qual os enfermeiros relatam a dificuldade em mudar seu cotidiano devido à rotina exaustiva e à falta de apoio; reconhecem mudanças particulares, compreendendo a formação de um olhar crítico/reflexivo/analítico, e a qualificação para o ensino e pesquisa; e as rupturas do cotidiano, que se referem às mudanças ocorridas no serviço, como a melhoria da assistência, pela implantação de resultados; e uma prática diferenciada por ter um profissional qualificado. Portanto, considera-se que a realização do mestrado contribuiu para o crescimento do intelectual e profissional do enfermeiro e, consequentemente, para o serviço, no cotidiano do Complexo Hospitalar Universitário, sendo reconhecido pelos enfermeiros o compromisso com uma maior responsabilidade social. Porém, ainda são necessárias reflexões sobre maneiras de minimizar as dificuldades apontadas, como forma de incentivar essa qualificação
Resumo:
This dissertation of Mestrado investigated the performance and quality of web sites. The target of the research is the proposal of an integrated model of evaluation of services of digital information in web educational sites. The universe of the research was constituted by eighteen Brazilian Universities that offer after-graduation courses, in the levels of mestrado and doutorado in the area of Engineering of Production. The adopted methodology was a descriptive and exploratory research, using the technique of systematic comment and focus group, for the collection of the data, using itself changeable independent dependents and, through the application of two instruments of research. The analysis protocol was the instrument adopted for evaluation and attainment of qualitative results. E the analysis grating was applied for evaluation and attainment of the quantitative results. The qualitative results had identified to the lack of standardization of web sites, under the attributes of content, hierarchy of information, design of the colors and letters. It of accessibility for carriers of auditory and visual special necessities was observed inexistence, as well as the lack of convergence of medias and assistivas technologies. The language of the sites also was evaluated and all present Portuguese only language. The general result demonstrated in grafico and tables with classification of the Universities, predominating the Good note As for the quantitative results, analysis method ed was estatistico, in order to get the descriptive and inferencial result between the dependent and independent variaveis. How much a category of analysis of the services of the evaluated sites, was found it props up and the index generality weighed. These results had served of base for ranking of existence or inexistence the Universities, how much of the information of services in its web sites. In analysis inferencial the result of the test of correlation or association of the independent variaveis (level, concept of the CAPES and period of existence of the program) with the caracteristicas, called was gotten categories of services. For this analysis the estatisticos methods had been used: coefficient of Spearman and the Test of Fisher. But the category you discipline of the Program of Mestrado presented significance with variavel independent and concept of the CAPES. Main conclusion of this study it was ausencia of satandardization o how much to the subjective aspects, design, hierarchy of information navigability and content precision and the accessibility inexistence and convergence. How much to the quantitative aspects, the information services offered by web sites of the evaluated Universities, still they do not present a satisfactory and including quality. Absence of strategies, adoption of tools web, techniques of institucional marketing and services that become them more interactive, navigable is perceived and with aggregate value
Resumo:
This study aims to identify, through the application of webometric indicators, which Post-Graduate Courses in Engineering recommended by the Coordination of Improvement of Higher Personnel Education (CAPES) in Brazil stand out in the web space, in relation to the communication process and dissemination of scientific information in the academic environment. For this, we analyzed the structures content of the sites, the use, through the conduct of investigations and searches, the quality of information available, as well as the structure of existent hypertexts in the sites of this universe of search. The tools and methodologies adopted for this study are: search engines (Google, Yahoo), Mapper software (Xenu Link Sleuth) and analysis software and visualization of networks (and Ucinet6 NetDraw). Webometric indicators are also used, such as size of the web sites, visibility, web impact factor, brightness and density of the network. These instruments provide a brief analysis and evaluation for this webometric study. Therefore, from the incursion of the literature used, it appears that there are many advantages of using this type of metric study in the so called Information Society. The obtained results could identify which postgraduate courses in engineering has a better availability of their information on the Web, as well to define which of these courses stands out in relation to the use of their information, which has been outstanding in respect to its impact factor and which offers a greater number of links that serve as a source of information for its users, contributing, in its turn, with the navigability of the same network. In summary, it is asserted that the webometric study presents promising results, which are able to achieve the proposed objectives, as well as identify the factors that contribute significantly to the good visualization of these sites in the network, thus helping the spread of information and scientific communication through the use of the Web.
Resumo:
The strengthening of the domestic industry in Brazil required the modernization, mechanization and expansion of salt production. Thereafter the production of sea salt started to be made in a process of continuous flow, where the product is constantly stored in yards, with daily movements in and out of salt. Thus far, the major bottleneck found in this production process is the control of production, because due to the large amount produced and variety of losses existing in the various stages of production there are not a regulated and safe way to control inventories with accuracy and speed demanded. In a typical case with a salt marsh company of Rio Grande do Norte state, salt produced is stored in two open courtyards and inventory control of salt made by carrying input / output relationship of salt in each storage yard. This work developed a conceptual model of inventory control, based on topography, adopting surveys into one of the courtyards of the company. There were 25 biweekly survey measurements over a year book to generate digital models representing the stock. For each measurement, results were compared with the values of inventory accounting provided by the salt marsh in order to identify existing losses and mark out the sales department on the actual stock available at each measurement date. Inventories calculated by the model indicated losses of 6,349 tonnes for the period of one year book and 3,279 tonnes for the period between harvests, when compared to the accounting control
Resumo:
This Master of Science Thesis deals with applying DEA (Data Envelopment Analysis) to the academic performance evaluation of graduate programs in Brazil, exploring it on a Mechanical and Production Engineering Program 2001-2003 data. The data used is that of the national assessment carried by CAPES, the governmental body in charge for graduate program assessment and certification. It is used the CCR output oriented DEA model, the CCR-Output with Assurance Region, and Window Analysis. The main findings are first that the CCR has the concerning problem of zero values of weights of outputs that is not appropriate in a sense that a graduate program has the higher efficiency score zeroing some output (e.g., number of academic papers published). Secondly, the Assurance Region method proved useful. Third, the Window Analysis also gave some light to the consistency of the performance in the time frame analysed. Also, the analysis results in the understanding that the Mechanics and Production Engineering should not be assessed jointly like currently applied by CAPES and rather should be assessed in its own field separately. Finally, the result of the DEA analysis showed some serious inconsistencies with the CAPES method. Graduate programs considered excellent has got low performance score and vice versa. This Thesis provides a strong argument in order to use DEA at least as a complimentary methodology for graduate program performance evaluation in Brazil
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Taking competitive advantage or satisfy the client are the reasons why companies have been implementing a Quality Management System (QMS). It brings benefits such as the improvement in the processes, products and services; an enhancement in the image of the company (marketing) and satisfaction of the clients. As a whole, this paper aims to evaluate the results obtained from the implementation of the QMS in the certified companies in the ISO 9001 standard, contained in the database of INMETRO, of the Rio Grande do Norte State (RN). In order to achieve the goals, a bibliographical research about the theme quality management system was made and, subsequently a survey was made with the managers of the certified companies in RN, using the online questionnaire. Out of 27 companies that have the certificate in Rio Grande do Norte, 21 responded the data collection instrument. The data analysis was made through techniques of descriptive and multivariate statistics: cluster analysis. The research instrument used contained 20 questions that address the main theme of this dissertation. Using the cluster analysis, four groupings that possessed similarities concerning the survey answers were found. This analysis allowed us to conclude that the QMS boosts significant improvements in the organizations, such as: quality in the reputation of the company and sales increase. On the other hand, it allowed us to identify as main difficulties: the dissemination of the quality culture, lack of commitment of the whole organization and the resistance of the workers
Resumo:
The study aims identify the existence of quality culture in Brazilian automotive dealerships with ISO 9001, motivated by this research problem: exist a quality culture in this dealerships, which facilitates the adoption of quality practices supported by ISO 9001? For referencing, the theoretical review was written in five themes: organizational culture, quality culture, total quality management, ISO 9001 quality management system and the Brazilian automobile industry. As regards the methodological aspects, the research has an applied nature, with a quantitative approach, being exploratory in their objectives, and bibliographic, documental and survey as technical procedures. The organizations participating in the study were all Brazilian automotive dealerships certified with ISO 9001. The research intended cover all the 80 active dealers with ISO 9001 certification identified by the Brazilian Committee for Quality (ABNT CB-25). The survey recorded participation of 32 companies (response rate 40%). The questionnaire was sent to seller managers, formatted into five sections: 1) introductory message 2) manager profile, 3) reasons for implementation and benefits generated by ISO 4) adoption levels of quality practices and 5) diagnosis of organizational culture. The questions contained in sections 2 and 3 were structured in multiple choice, and in the remaining sections were structured in Likert 5-point scale. The statistical method used (data analysis), was the descriptive statistics, for data representation in frequency percentage (FP) and standard level (SL). The results showed that the interviewed dealerships have an organizational culture with very high levels of prevalence in "outcome orientation" and "attention to detail" cultural dimensions. In addition, about the other two dimensions considered conducive to quality (innovation and teamwork/respect for people), both observed high prevalence. Based on the present results, concluded that the organizational culture of Brazilian dealerships with ISO 9001 are quality oriented, being conducive to adoption of quality practices supported by TQM Systems. However, it is important to mention that the quality culture identified is not sufficiently developed to adopt quality practices at optimal levels, which sets up an unfavorable scenario to deals with highly rigorous customer
Resumo:
In practically all vertical markets and in every region of the planet, loyalty marketers have adopted the tactic of recognition and reward to identify, maintain and increase the yield of their customers. Several strategies have been adopted by companies, and the most popular among them is the loyalty program, which displays a loyalty club to manage these rewards. But the problem with loyalty programs is that customer identification and transfer of loyalty points are made in a semiautomatic. Aiming at this, this paper presents a master's embedded business automation solution called e-Points. The goal of e-Points is munir clubs allegiances with fully automated tooling technology to identify customers directly at the point of sales, ensuring greater control over the loyalty of associate members. For this, we developed a hardware platform with embedded system and RFID technology to be used in PCs tenant, a smart card to accumulate points with every purchase and a web server, which will provide services of interest to retailers and customers membership to the club
Resumo:
The nanometric powders have special features that usually result in new properties, originating applications or expanding them in various fields of knowledge. Because having a high area/volume ratio, phenomena such as superficial strength of adsorption becomes greater than the weight of the powder which makes more difficult its handling. The high power of agglomeration of these powders requires study and development of equipments to enable its management into the plasma torch. The objective of this work is to develop a powder feeder which can solve the mainly problems about insertion of powder into the thermal spray developed in the laboratory of plasmas, which are carried out with plasma torch arc not transferred (plasma spray). Therefore, it was made a aluminum s powder feeder and tests were performed to verify their operation and determine its rate of deposition by spraying powders of niobium pentoxide (Nb2O5) and titanium dioxide (TiO2) with particle sizes less than 250 mesh (<0.063 mm). We used masses of 0.5 g - 1.0 g and 1.5 g of each powder in tests lasting 15 seconds - 20 to 25 seconds for each mass. The tests were performed in two ways: at atmospheric pressure using argon gas with a flow of 9 l / min as carrier gas and through a Venturi pipe also using argon gas with a flow of 9 l / min as carrier gas and with a flow of 20 l/min as the feed gas passing through the Venturi pipe. The powder feeder developed in this paper is very easy to be handling and building, resulting in feeding rate of 0.25 cm3/min - 1.37 cm3/min. The TiO2 showed higher feeding rates than the Nb2O5 in all tests, and the best rates were obtained with tests using mass 1.5 g and time of 15 seconds, reaching feeding rate of 1.37 cm3/min. The flow of feed had low interference in feeding rate during the tests
Resumo:
The aluminothermic reduction consists in an exothermic reaction between a metallic oxide and aluminum to produce the metal and the scum. The extracted melted metal of that reaction usually comes mixed with particles of Al2O3 resulting of the reduction, needing of subsequent refine to eliminate the residual impure as well as to eliminate porosities. Seeking to obtain a product in powder form with nanometric size or even submicrometric, the conventional heat source of the reaction aluminothermic , where a resistor is used (ignitor) as ignition source was substituted, for the plasma, that acts more efficient way in each particle of the sample. In that work it was used as metallic oxide the niobium pentoxide (Nb2O5) for the exothermal reaction Nb2O5 + Al. Amounts stoichiometric, substoichiometric and superestoichiometric of aluminum were used. The Nb2O5 powder was mixed with aluminum powder and milled in planetarium of high energy for a period of 6 hours. Those powders were immerged in plasm that acts in a punctual way in each particle, transfering heat, so that the reaction can be initiate and spread integrally for the whole volume of the particle. The mixture of Nb2O5 + Al was characterized through the particle size analysis by laser and X-ray diffraction (DRX) and the obtained product of reaction was characterized using the electronic microscopy of sweeping (MEV) and the formed phases were analyzed by DRX. Niobium powders with inferior sizes to 1 mm were obtained by that method. It is noticed, through the analysis of the obtained results, that is possible to accomplish the aluminothermic reduction process by plasma ignition with final particles with inferior sizes to the original oxide
Resumo:
Plasma DC hollow cathode has been used for film deposition by sputtering with release of neutral atoms from the cathode. The DC Plasma Ar-H2 hollow cathode currently used in the industry has proven to be effective in cleaning surfaces and thin film deposition when compared to argon plasma. When we wish to avoid the effects of ion bombardment on the substrate discharge, it uses the post-discharge region. Were generated by discharge plasma of argon and hydrogen hollow cathode deposition of thin films of titanium on glass substrate. The optical emission spectroscopy was used for the post-discharge diagnosis. The films formed were analyzed by mechanical profilometry technique. It was observed that in the spectrum of the excitation lines of argon occurred species. There are variations in the rate of deposition of titanium on the glass substrate for different process parameters such as deposition time, distance and discharge working gases. It was noted an increase in intensity of the lines of argon compared with the lines of titanium. Deposition with argon and hydrogen in glass sample observed a higher rate deposition of titanium as more closer the sample was in the discharge