Produção pesqueira artesanal: diagnóstico ergonômico e bases para um planejamento nutricional situado e a promoção da saúde dos jangadeiros

The traditional fishing with rafts is characterized by unpredictability, high stakes and inadequate work conditions. The extensive working hours, physical wear, inadequate nutrition, unsanitary conditions, lack of salvage equipment and instruments suitable working, added by the presence of changes in the nutritional status of fisherman, that contribute to the picture of insecurity in high seas, injuries and health. This study aimed to analyze the activity of the fisherman s from Ponta Negra, Natal / RN, and check the conditions of supply of these fishermen and their implications on health and development of their work. To this finality, was used a methodology based on the ergonomic work analysis employing techniques such as observational and interactional conversational action, listening to the answers, observation protocols, photographic and video records. The script conversational dynamic action was developed from literature searches about the artisanal fisheries, culture and food habits of this population, and analyzes the overall situation of focus and two reference situations. To collect data on the usual diet of fisherman as well as quantitative and qualitative analysis that was used for data analysis and 24h recall the Food Frequency Questionnaire (FFQ). The impact of this power to the health of fisherman was evaluated performing a nutritional assessment. The results revealed that the fishermen carry out their activities with poor working conditions, health and nutrition. Feeding practices of these fishermen undertake development work, making it even more stressful, as well contributing to the emergence of Chronic Noncommunicable Diseases. The management of the activity, as well as the current structure of the vessel, also contributes to the adoption of inappropriate feeding practices during the shipment of catch. The results of this indicate the need for adequate interventions in order to assist in recovery and / or maintenance of health of fisherman minimizing reflections of nutritional disorders for the development activity by improving the quality of life in this population

Ergonomia, sustentabilidade sócio-ambiental e atividade de pesca artesanal com jangadas: estudo de caso na Praia de Ponta Negra, Natal-RN

The fishing is made possible by the handiwork of a fisherman, not using appliances that achieve the same levels of industrial fishing productivity and not causing environmental impacts on fish stocks with the same intensity. The adoption of sustainability practices in this type of fishing has been requested for the achievement of environmental and socioeconomic improvements, since its production has been decreasing over the years and overfishing has led to reduced stocks also stand out environmental aggressions such as pollution. Thus, this research aims to analyze the interference of environmental aspects/impacts that permeate the activity performed by fisherman on the beach of Ponta Negra, Natal-RN, in order to propose recommendations for environmental sustainability. We used a methodology based on the ergonomic work analysis (WISNER, 1987; GUERIN, 2001; VIDAL, 2008) using techniques such as observational and interactional observation protocols, photographs, videos, conversational action, and listening to verbalizations. To understand the vulnerability of the environment in which the activity is carried fisherman and the interferences that it suffers, we used the study of environmental aspects/impacts (SÁNCHEZ 2008). As a result, it appears that from the observations located and reports raftsmen, changes in the sea, the search for new fishing grounds farther from the coast, reducing fishery production, waste generation and pollution of the workplace, and the difficulty in docking rafts, factors arising from the pressures both for society as Seen by fisherman, denoting the necessity of drawing up recommendations and actions proposed by management activity by promoting discussion among raftsmen and accountable institutions, and training through workshops on environmental education, aiming to positive changes in the activity fisherman from Ponta Negra and the environment in which raftsmen are inserted in order to seek a sustainable activity, preserving its characteristics

Uma abordagem para manipulação de informações geográficas utilizando Scalable Vectors Graphics

In this work, we propose a Geographical Information System that can be used as a tool for the treatment and study of problems related with environmental and city management issues. It is based on the Scalable Vector Graphics (SVG) standard for Web development of graphics. The project uses the concept of remate and real-time mar creation by database access through instructions executed by browsers on the Internet. As a way of proving the system effectiveness, we present two study cases;.the first on a region named Maracajaú Coral Reefs, located in Rio Grande do Norte coast, and the second in the Switzerland Northeast in which we intended to promote the substitution of MapServer by the system proposed here. We also show some results that demonstrate the larger geographical data capability achieved by the use of the standardized codes and open source tools, such as Extensible Markup Language (XML), Document Object Model (DOM), script languages ECMAScript/ JavaScript, Hypertext Preprocessor (PHP) and PostgreSQL and its extension, PostGIS

Modelagem e controle adaptativo de uma planta didática de nível com instrumentação industrial

The control, automation and optimization areas help to improve the processes used by industry. They contribute to a fast production line, improving the products quality and reducing the manufacturing costs. Didatic plants are good tools for research in these areas, providing a direct contact with some industrial equipaments. Given these capabilities, the main goal of this work is to model and control a didactic plant, which is a level and flow process control system with an industrial instrumentation. With a model it is possible to build a simulator for the plant that allows studies about its behaviour, without any of the real processes operational costs, like experiments with controllers. They can be tested several times before its application in a real process. Among the several types of controllers, it was used adaptive controllers, mainly the Direct Self-Tuning Regulators (DSTR) with Integral Action and the Gain Scheduling (GS). The DSTR was based on Pole-Placement design and use the Recursive Least Square to calculate the controller parameters. The characteristics of an adaptive system was very worth to guarantee a good performance when the controller was applied to the plant

Acelerando algoritmos de baixo nível em visão robótica com hardware reconfigurável

A challenge that remains in the robotics field is how to make a robot to react in real time to visual stimulus. Traditional computer vision algorithms used to overcome this problem are still very expensive taking too long when using common computer processors. Very simple algorithms like image filtering or even mathematical morphology operations may take too long. Researchers have implemented image processing algorithms in high parallelism hardware devices in order to cut down the time spent in the algorithms processing, with good results. By using hardware implemented image processing techniques and a platform oriented system that uses the Nios II Processor we propose an approach that uses the hardware processing and event based programming to simplify the vision based systems while at the same time accelerating some parts of the used algorithms

Sistema inteligente para detecção de manchas de óleo na superfície marinha através de imagens de SAR

Oil spill on the sea, accidental or not, generates enormous negative consequences for the affected area. The damages are ambient and economic, mainly with the proximity of these spots of preservation areas and/or coastal zones. The development of automatic techniques for identification of oil spots on the sea surface, captured through Radar images, assist in a complete monitoring of the oceans and seas. However spots of different origins can be visualized in this type of imaging, which is a very difficult task. The system proposed in this work, based on techniques of digital image processing and artificial neural network, has the objective to identify the analyzed spot and to discern between oil and other generating phenomena of spot. Tests in functional blocks that compose the proposed system allow the implementation of different algorithms, as well as its detailed and prompt analysis. The algorithms of digital image processing (speckle filtering and gradient), as well as classifier algorithms (Multilayer Perceptron, Radial Basis Function, Support Vector Machine and Committe Machine) are presented and commented.The final performance of the system, with different kind of classifiers, is presented by ROC curve. The true positive rates are considered agreed with the literature about oil slick detection through SAR images presents

Análise de confiabilidade de uma bomba centrífuga: aplicação na injeção de água para recuperação de petróleo

The oil industry`s need to produce with maximum efficiency, not to mention the safety and the environment aspects, encourages the optimization of processes. It makes them look for a level of excellence in acquisition of equipment, ensuring the quality without prejudice security of facilities and peoples. Knowing the reliability of equipment and that this stands for a system is fundamental to the production strategy to seeks the maximum return on investment. The reliability analysis techniques have been increasingly applied in the industry as strategy for predicting failures likelihood ensuring the integrity of processes. Some reliability theories underlie the decisions to use stochastic calculations to estimate equipment failure. This dissertation proposes two techniques associating qualitative (through expertise opinion) and quantitative data (European North Sea oil companies fault database, Ored) applied on centrifugal pump to water injection system for secondary oil recovery on two scenarios. The data were processed in reliability commercial software. As a result of hybridization, it was possible to determine the pump life cycle and what impact on production if it fails. The technique guides the best maintenance policy - important tool for strategic decisions on asset management.

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Estudo de sistemas microemulsionados utilizando água do mar na recuperação avançada de petróleo

Petroleum exists in the nature in certain underground formations where it is adsorbed into the rocks pores. For the conventional recovery methods usually only 30% of the oil is extracted and this can be credited, basically, to three aspects: high viscosity of the oil, geology of the formation and high interfacial tensions between the reservoir s fluids. The enhanced recovery methods use the injection of a fluid or fluids mixture in a reservoir to act in points where the conventional process didn't reach the recovery rates. Microemulsion flooding, considered an enhanced method, has the purpose to desorb the oil from the rock formation and to attain an efficient displacement of the oil emulsion. With this in mind, this work was accomplished with two main objectives: the study of the parameters effect that influence a microemulsified system (surfactant and cosurfactant types, C/S rate and salinity) and the evaluation of displacement efficiency with the microemulsions that showed stability in the rich aqueous area. For the analyzed parameters it was chose the microemulsions composition used in the recovery stage: 25% water, 5% kerosene, 46.7% of butanol as cosurfactant and 23.3% of BC or SCO cosurfactant. The core plugs of Assu and Botucatu sandstones were appraised in porosity and permeability tests and then submitted to the steps of saturation with seawater and oil, conventional recovery with water and enhanced recovery with the selected microemulsions. The Botucatu sandstone presented better recovery parameters, and the microemulsion composed with BS surfactant had larger recovery efficiency (26.88%)

Aplicação da água residuária das salinas no tratamento de efluente têxtil

The treatment of colored and alkaline effluent has been a challenge to the textile industry. An alternative to remove the colors of those effluents is applying magnesium chloride as a coagulant agent. The magnesium ion, in high pH, hydrolyzes itself, forming the magnesium hydroxide which has a large adsorptive area and positive electrostatic charges able to act as an efficient coagulant. The bittern wastewater from the salt industries has been studied as a potential font of this magnesium ion. Nowadays, this bittern wastewater is evicted into the sea, without any treatment or other use. This thesis has evaluated the potential of applying the wastewater from the salt industries in the treatment of dyeing effluent containing indigo dye and alkaline pH. All the experiments were made in jar tests simulating the chemical coagulation, flocculation and decantation steps ranging the pH and the concentration of magnesium ion. Were obtained removals between 96% and 76% for turbidity, apparent color, and true color, respectively, using 200mg/L Mg2+. The reduction of costs with acid, when were used the salt industries wastewater, comparing with Al2(SO4)3, was 62%. For the degradation of organic matter remaining in the clarified, around 900 mg/L, was applyed the advanced process of oxidation: photo-Fenton. The preliminary results showed 57% reduction in DOC. According to the results obtained, the salt industries wastewater can be applied, as coagulant, in the physical-chemical treatment of the denim dyeing wastewater, so it is not necessary a previous adjust of pH, efficiently and economically

Simulações da ação do vento e da dispersão de contaminantes no estuário do Rio Potengi/ Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análise da vulnerabilidade de Natal/RN frente às mudanças climáticas

The interaction between land and water, resulting from dynamic agents, such as wind, waves and tides, characterizes the coastal zone as a dynamic environment that is constantly disturbed and that may alter the balance of natural and man-made environment. Such modifications may be intensified when considering the climate change. This environment is highly attractive for the development of economic activities and urbanization, current scenario of the city of Natal. Weighing the economic importance for the state and the physical environment in which the capital of Rio Grande do Norte is inserted, this study aims to identify and analyze vulnerabilities and impacts caused by the rising sea level in the municipality. To that end, we defined a coastline, delimited areas susceptible to flooding and presented some flood scenarios. This way we could identify and analyze the impacts of each flood scenario in its respective section. Finally, it appears that the coastal zone in which Natal is inserted is a fragile area that requires actions aimed at mitigating vulnerabilities and facing the problem that caused the rise in the mean sea level (MSL), and mitigating the presented vulnerability framework; it is necessary to implement actions that effectively contribute to the protection and adaptation of the most fragile areas

Reflexões e contribuições para o ensino de gravitação clássica no nível médio

The subject of Classic Gravitation is part of the actual curriculum for High School in Brazil, and it is taught in the first year of that education level. This master thesis presents a research regarding the subject Classic Gravitation in High School. This research was based in two complementary guidelines of research and action. The first guideline was the analysis of 21 didactic books of physics which are the more frequently used in High School, in the city of Natal/RN. The second guideline, worked after being verified the most common deficiencies presents in the didactic books, was the elaboration, followed by a practical application, of a course suggesting how to approach that subject in the classroom. The Parâmetros Curriculares Nacionais para o Ensino Médio (National Curricular Parameters for High School PCNEM) defend that Classic Gravitation is very important in the student s formation and that its study helps the comprehension of many nature s phenomena. Because of this vision of that subject by the PCNEM, the 21 analyzed books were separated in two groups: the first one, containing 10 books, was edited before the spreading of PCNEM, and the second, with 11 books, after that spreading. Whatever the group to which the didactic books belonged, the great majority of them let that subject in a second plan; two of them even suggesting, in the teacher s orientations, that the subject Gravitation can be suppressed in case of insufficient time . These analyses points that the PCNEM had produced no changes in the conception of the authors that wrote books regarding that subject. To analyze the didactic books, we elaborated a script which was used as an analysis tool, in which we put in evidence the relative importance of the historic and philosophic contextualization of the subject, the quotidian experience of the students and the interdisciplinary approach, among other aspects. It became evident that the didactic books give very little emphasis to historic aspects of the knowledge construction, to the relations with the day-by-day questions and to the interdisciplinary character of the subject Gravitation. It calls attention the non concordance among the authors opinions regarding the necessary previous knowledge or prerequisites the students should fulfill in order to begin to study Gravitation. The course we elaborated was given to a group of teachers as well as to students. In those courses we treated theoretical and practical aspects and emphasized historical questions and the ones which are related to people s daily life. The course for teachers was realized as an extra-mural activity of the UFRN and was given by the author of this thesis at the Escola Estadual Francisco Ivo Cavalcanti (a state public school in Natal/RN). There were 23 teachers present, from several public schools and several fields of knowledge. The thesis supervisor and the master degree s colleagues of the author acted as collaborators , reporting the participants opinions and speeches. The course to the students, on the other hand, had the participation of 300 regular students who belonged to 6 different 1st year classes of the High School Escola Marista de Natal (RN), in which the author acts as a physics teacher. The student s course was realized as part of the regular curriculum activities, in which three classes stood under the responsibility of the author and other three classes in charge of another Marista s teacher, who participated as a collaborator . The teacher s course as well as the students one were given in two stages, with five hours each. The first stage was divided in two moments, the first one focused on the survey of the spontaneous conceptions about gravitation, in which we worked basically with experiments of free throwing and pendulum, and the second one focused in theoretical presentations and quarrels about universe s models. In the second stage of the course we improved the study of Kepler s laws and the Newton s Universal Gravitation law, and we used as motivating tools some practices involving the construction of the solar system in scale. As instruments for evaluating both courses we used questionnaires and reported the speeches with participants opinions, beyond usual written evaluations in the course for the students. The teachers who participated in the course showed very good wills in realizing interdisciplinary practices; nevertheless, according their own speeches, they frequently came across the difficulty of how to do . From the experience we had in both courses, we conclude that the approach we propose hear to the teaching of the subject Classic Gravitation , supported on the tripod theory, practice and historical and philosophical aspects, is viable and effective. One hopes that this research may contribute in the formation of a opinion, among the teachers, concerning how to approach the subject of Classic Gravitation, and may offer suggestions in order those who want to apply that approach may develop classroom practices aiming to improve the teaching of that subject, which has a singular importance in the formation of High School students

Desenvolvimento de um programa de ensino de Física Térmica para o nível médio

Neste trabalho de mestrado, detemos nossa pesquisa na elaboração e implementação de planos de aula, que pudessem contribuir para estimular a participação e o interesse dos alunos nas aulas de física. Utilizamos como principal recurso didático, textos provenientes da Internet, que proporcionasse aos estudantes acesso a leitura envolvendo conteúdos científicos, tentando amenizar a falta de qualquer forma de material didático de ciências para os alunos. Pudemos constatar também, deficiências por parte dos educandos, em atividades que envolviam leitura e interpretação de textos, o que nos preocupou bastante enquanto educador e nos motivou a provocar mudanças neste quadro. As atividades aqui propostas foram elaboradas e aplicadas numa turma do segundo ano do nível médio, atendendo conteúdos de física térmica mas com um enfoque interdisciplinar. Cada plano de aula proporcionou participação ativa de cada estudante, seja na realização de tarefas solicitadas ou na participação de discussões em sala de aula. Os resultados mais expressivos desta pesquisa foram aumento na participação dos alunos nas atividades fora e dentro da classe e uma mudança na forma de pensar e elaborar soluções para determinados problemas

Uma proposta para o ensino de eletromagnetismo no nível médio

This paper aims at building a proposal for teaching of electromagnetism in the secondary level in the state public school in Natal, RN, encompassing at the most possible comprehensive manner the fundamental aspects of electromagnetism. The methodology employed here is prioritize physical concepts rather than instruments (such as the mathematics), which should have the connotation of just tools, or of aids in the context of physics teaching in the referred teaching level. The proposal is to give teachers a consultation resource, from differentiated lesson plans, which have as main focus activities based primarily in texts and active participation of students in the teaching- learning process and the implementation of the PCN+ proposals (BRAZIL, 2000), which suggest alternative ways to make the practice in the classroom more exciting, targeting a significant teaching-learning process for both the teacher and the student. This material was applied during the 3rd and 4th term (i.e., bimester) throughout the school year of 2007, in the State School Teacher Varela Barca in two classes (3V1 and 3V2) of 3rd grade of secondary level. As evaluation of the implementation of this proposal one can cite that students were more secure when to apply the concepts, when conducting the experiments, and less anxious when formal evaluation of the evidence, showing greater motivation when presented to electromagnetism contextualized in their everyday situations. The product of this educational work includes, besides the dissertation, the lesson plans, itineraries and experimental assessment of the instruments used (Annex E to I)