Proteção em sistemas elétricos com geração distribuída utilizando a transformada wavelet

A typical electrical power system is characterized by centr alization of power gene- ration. However, with the restructuring of the electric sys tem, this topology is changing with the insertion of generators in parallel with the distri bution system (distributed gene- ration) that provides several benefits to be located near to e nergy consumers. Therefore, the integration of distributed generators, especially fro m renewable sources in the Brazi- lian system has been common every year. However, this new sys tem topology may result in new challenges in the field of the power system control, ope ration, and protection. One of the main problems related to the distributed generati on is the islanding formation, witch can result in safety risk to the people and to the power g rid. Among the several islanding protection techniques, passive techniques have low implementation cost and simplicity, requiring only voltage and current measuremen ts to detect system problems. This paper proposes a protection system based on the wavelet transform with overcur- rent and under/overvoltage functions as well as infomation of fault-induced transients in order to provide a fast detection and identification of fault s in the system. The propo- sed protection scheme was evaluated through simulation and experimental studies, with performance similar to the overcurrent and under/overvolt age conventional methods, but with the additional detection of the exact moment of the fault.

Geração de padrão de marcha adaptável para uma órtese ativa de membros inferiores

Atualmente com o crescente aumento de dispositivos robóticos destinados para aplicação na área de mobilidade de pessoas que sofreram algum tipo de lesão medular, se faz necessário desenvolver novas ferramentas para tornar tais equipamentos mais adaptáveis, seguros e autônomos. Para que as órteses robóticas que auxiliam na locomoção de pessoas paraplégicas possam desempenhar sua função, estas devem ser capazes de reproduzir os movimentos perdidos com o máximo de fidelidade e segurança em ambientes que eventualmente possam conter obstáculos de diferentes tipos como buracos, escadas e calçadas. As órteses robóticas para membros inferiores têm a capacidade de caminhar, subir e descer degraus, todavia, esses movimentos, na maioria das vezes, não se adaptam ao ambiente, sendo assim, para uma órtese robótica que foi projetada para subir um degrau com uma determinada altura ao se deparar com um degrau maior provavelmente não conseguirá realizar essa tarefa com a mesma segurança. Para solucionar esse e outros problemas, esse trabalho apresenta um Sistema de Auxílio à Locomoção (SAL) dotado de um planejador de passos e um gerador de referências angulares com características antropomórficas para a órtese robótica Ortholeg. O SAL utiliza dados antropométricos do usuário para gerar um padrão de marcha personalizado, dessa forma, a órtese em questão é capaz de adaptar o tamanho do passo para não colidir com obstáculos presentes no ambiente e transpor buracos com diversos tamanhos, subir e descer escadas e calçadas com diferentes valores de altura e comprimento. Para desenvolver o sistema de auxílio à locomoção foram adaptadas técnicas de planejamento de caminho, usadas a princípio em robôs bípedes. São apresentados vários experimentos que mostram a órtese Ortholeg realizando alguns movimentos com características antropomórficas para diferentes distâncias de caminhada e três tipos de obstáculos: degrau, buraco e calçada. A autonomia adquirida com a utilização do sistema de planejamento apresentado facilita a utilização de órteses robóticas como também garante uma maior segurança ao usuário.

Contribuições para estratégia de controle aplicada à geração fotovoltaica interconectada à rede elétrica

Generation systems, using renewable sources, are becoming increasingly popular due to the need for increased use of electricity. Currently, renewables sources have a role to cooperate with conventional generation, due to the system limitation in delivering the required power, the need for reduction of unwanted effects from sources that use fossil fuels (pollution) and the difficulty of building new transmission and/or distribution lines. This cooperation takes place through distributed generation. Therefore, this work proposes a control strategy for the interconnection of a PV (Photovoltaic) system generation distributed with a three-phase power grid through a connection filter the type LCL. The compensation of power quality at point of common coupling (PCC) is performed ensuring that the mains supply or consume only active power and that his currents have low distorcion. Unlike traditional techniques which require schemes for harmonic detection, the technique performs the harmonic compensation without the use of this schemes, controlling the output currents of the system in an indirect way. So that there is effective control of the DC (Direct Current) bus voltage is used the robust controller mode dual DSMPI (Dual-Sliding Mode-Proportional Integral), that behaves as a sliding mode controller SM-PI (Sliding Mode-Proportional Integral) during the transition and like a conventional PI (Proportional Integral) in the steady-state. For control of current is used to repetitive control strategy, which are used double sequence controllers (DSC) tuned to the fundamental component, the fifth and seventh harmonic. The output phase current are aligned with the phase angle of the utility voltage vector obtained from the use of a SRF-PLL (Synchronous Reference Frame Phase-Locked-Loop). In order to obtain the maximum power from the PV array is used a MPPT (Maximum Power Point Tracking) algorithm without the need for adding sensors. Experimental results are presented to demonstrate the effectiveness of the proposed control system.

A Geração de inovação na carcinicultura do RN: Uma análise a partir da imersão social

This dissertation examines the organizational innovation as a nonlinear process, which occurs in a social and political context and, therefore, socially immersed. Examines the case of shrimp in the state of RN, starting from the following problem: although the norteriograndense shrimp occupies the largest producer of farmed shrimp from Brazil, has a series of bottlenecks concerning the generation of industry innovation, concerning the social relationships and policies between the various actors in the network, whether private or public, and its consequences in terms of opportunity and limits generated for the innovative dynamics. The objective of the research is to understand how the social embeddedness of political actors affects norteriograndense shrimp within the context of structural relations, the industry generation of innovation, throughout its technological trajectory . The approach of social embeddedness balances atomised perspectives, undersocialized and oversocialized, of economic action, considering both the human capacity to act as sources of constraint, whose mechanisms are analyzed the structural and political. In methodological terms this is a case study, analyzed from the research literature, documentary and experimental. Primary data were collected through semi-structured interviews and analyzed in depth by the technique of content analysis. Was adopted a longitudinal approach, seeking to understand the phenomenon from the perspective of the subjects, describing it in an inductive process of investigation. After characterizing the sector and defining their technological trajectory, the analysis of the results followed its four stages: (1) Introduction of Technology: 1973-1980, (2) Intensification of Research: 1981-1991, (3) Technological Adaptation, 1992 -2003, (4) Technological Crisis: 2004-2009. A cross-sectional analysis along the evolutionary trajectory revealed the character of structural changes and policies over time, and implications on the generating process of innovation. Note that, the technological limit to which the sector reached requires changes in technology standards, but is more likely that the potiguar shrimp is entering a new phase of his career in technology rather than a new technological paradigm

Jovens terena na cidade de Campo Grande (MS): política e geração

Research with indigenous in urban context are gaining steam in recent years, particularly with the intensification of migration resulting from problems such as lack of land for subsistence. However, in relation to Terena, subjects in this study, the contemporary anthropological research aimed at residents in cities still are not privileged, especially to youth. Thus, the dissertation has as main objective the discussion around some axes, among them indigenous youth Terena ethnicity politics, - indigenous movement - and racism. These themes appeared during fieldwork where privileged six trajectories of young Terena who migrated to Campo Grande (MS) and have different ways to mean the city and experiencing everyday life

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite