Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo

The Methods for compensation of harmonic currents and voltages have been widely used since these methods allow to reduce to acceptable levels the harmonic distortion in the voltages or currents in a power system, and also compensate reactive. The reduction of harmonics and reactive contributes to the reduction of losses in transmission lines and electrical machinery, increasing the power factor, reduce the occurrence of overvoltage and overcurrent. The active power filter is the most efficient method for compensation of harmonic currents and voltages. The active power filter is necessary to use current and voltage controllers loop. Conventionally, the current and voltage control loop of active filter has been done by proportional controllers integrative. This work, investigated the use of a robust adaptive control technique on the shunt active power filter current and voltage control loop to increase robustness and improve the performance of active filter to compensate for harmonics. The proposed control scheme is based on a combination of techniques for adaptive control pole placement and variable structure. The advantages of the proposed method over conventional ones are: lower total harmonic distortion, more flexibility, adaptability and robustness to the system. Moreover, the proposed control scheme improves the performance and improves the transient of active filter. The validation of the proposed technique was verified initially by a simulation program implemented in C++ language and then experimental results were obtained using a prototype three-phase active filter of 1 kVA

Controle de Temperatura do Sistema de Refrigeração a água de uma tocha plasmática Indutiva Utilizando Lógica fuzzy

Este projeto propõe desenvolver e implementar um controlador para o sistema de refrigeração da tocha indutiva a plasma térmico. Este processo é feito a partir da medição da temperatura através de um sensor do sistema de refrigeração. O sinal produzido será enviado para uma entrada analógica do microcontrolador da família PIC, que utilizando os conceitos de lógica fuzzy, controla a velocidade de um motor bomba. Este é responsável por diminuir ou aumentar o fluxo circulante de água que passa pela bobina, pelo corpo da tocha e pelo flange de fixação, deixando-os na temperatura desejada. A velocidade desta bomba será controlada por um inversor de frequência. O microcontrolador, também, acionará um ventilador caso exceda a temperatura de referência. A proposta inicial foi o desenvolvimento do controle da temperatura da bobina de uma tocha indutiva a plasma, mas com algumas adequações, foi possível também aplicar no corpo da tocha. Essa tocha será utilizada em uma planta de tratamento de resíduos industriais e efluentes petroquímicos. O controle proposto visa garantir as condições físicas necessárias para tocha de plasma, mantendo a temperatura da água em um determinado nível que permita o resfriamento sem comprometer, no entanto, o rendimento do sistema. No projeto será utilizada uma tocha de plasma com acoplamento indutivo (ICPT), por ter a vantagem de não possuir eletrodos metálicos internos sendo erodidos pelo jato de plasma, evitando uma possível contaminação, e também devido à possibilidade do reaproveitamento energético através da cogeração de energia. O desenvolvimento da tecnologia a plasma na indústria de tratamento de resíduos vem obtendo bons resultados. Aplicações com essa tecnologia têm se tornado cada vez mais importantes por reduzir, em muitos casos, a produção de resíduos e o consumo de energia em vários processos industriais

Análise de confiabilidade de uma bomba centrífuga: aplicação na injeção de água para recuperação de petróleo

The oil industry`s need to produce with maximum efficiency, not to mention the safety and the environment aspects, encourages the optimization of processes. It makes them look for a level of excellence in acquisition of equipment, ensuring the quality without prejudice security of facilities and peoples. Knowing the reliability of equipment and that this stands for a system is fundamental to the production strategy to seeks the maximum return on investment. The reliability analysis techniques have been increasingly applied in the industry as strategy for predicting failures likelihood ensuring the integrity of processes. Some reliability theories underlie the decisions to use stochastic calculations to estimate equipment failure. This dissertation proposes two techniques associating qualitative (through expertise opinion) and quantitative data (European North Sea oil companies fault database, Ored) applied on centrifugal pump to water injection system for secondary oil recovery on two scenarios. The data were processed in reliability commercial software. As a result of hybridization, it was possible to determine the pump life cycle and what impact on production if it fails. The technique guides the best maintenance policy - important tool for strategic decisions on asset management.

Desenvolvimento de microcápsulas contendo as antocianinas presentes no corante do extrato do jambo por polimerização interfacial

The industries of food, medicine and cosmetic apply microencapsulation for many reasons, among them, stabilize the active, control the release of encapsulated and separate incompatible components of the formulation. In this context, microencapsulation techniques have been used in the food industry to provide stable liquid and solid ingredients. Anthocyanins have high antioxidant potential, but they are photodegradable. The challenges are therefore directed to the research for techniques that could make this potential remaining active and bioavailable and could be used as a vehicle for the delivery release of bioactive and micronutrients in appropriate conditions and levels. This work has as main objective to propose a method to encapsulate the anthocyanins in the extract of mountain apple using the interfacial polymerization technique. As well as to define the ideal conditions of temperature and agitation system for this procedure. The microparticles were characterized for size, morphology, active distribution, surface charge, degradation, composition and stability. The results, like particle diameter of 5.94 μm and Zeta potential of 7.03 mV, showed that the technique used to obtain these microparticles was satisfactory and has potential for application in cosmetics and food

Avaliação de catalisadores a base de carbeto e nitreto de molibdênio na obtenção de lactitol via hidrogenação da lactose

Seeking a greater appreciation of cheese whey was developed to process the hydrogenation of lactose for the production of lactitol, a polyol with high added value, using the catalyst Ni / activated carbon (15% and 20% nickel), the nitride Mo2N, the bimetallic carbide Ni-Mo/ activated carbon and carbide Mo2C. After synthesis, the prepared catalysts were analyzed by MEV, XRD, laser granulometry and B.E.T. The reactor used in catalytic hydrogenation of lactose was the type of bed mud with a pressure (68 atm), temperature (120 oC) and stirring speed (500 rpm) remained constant during the experiments. The system operated in batch mode for the solid and liquid and semi-continuous to gas. Besides the nature of the catalyst, we studied the influence of pH of reaction medium for Mo2C carbide as well as evaluating the character of the protein inhibitor and chloride ions on the activity of catalysts Ni (20%)/Activated Carbon and bimetallic carbide Ni-Mo/Activated Carbon. The decrease in protein levels was performed by coagulation with chitosan and adsorption of chloride ions was performed by ion exchange resins. In the process of protein adsorption and chloride ions, the maximum percentage extracted was about 74% and 79% respectively. The micrographs of the powders of Mo2C and Mo2N presented in the form of homogeneous clusters, whereas for the catalysts supported on activated carbon, microporous structure proved impregnated with small particles indicating the presence of metal. The results showed high conversion of lactose to lactitol 90% for the catalyst Ni (20%)/Activated Carbon at pH 6 and 46% for the carbide Mo2C pH 8 (after addition of NH4OH) using the commercial lactose. Monitoring the evolution of the constituents present in the reaction medium was made by liquid chromatography. A kinetic model of heterogeneous Langmuir Hinshelwood type was developed which showed that the estimated constants based catalysts promoted carbide and nitride with a certain speed the adsorption, desorption and production of lactitol

Utilização de microemulsões como agentes modificadores de superfícies para remoção de íons metálicos

The heavy metals are used in many industrial processes and when discharged to the environment can cause harmful effects to human, plants and animals. The adsorption technology has been used as an effective methodology to remove metallic ions. The search for new adsorbents motivated the development of this research, accomplished with the purpose of removing Cr (III) from aqueous solutions. Diatomite, chitosan, Filtrol 24TM and active carbon were used as adsorbents. To modify the adsorbent surface was used a bicontinuous microemulsion composed by water (25%), kerosene (25%), saponified coconut oil (10%) and as co-surfactant isoamyl or butyl alcohols (40%). With the objective of developing the best operational conditions the research started with the surfactant synthesis and after that the pseudo-ternary diagrams were plotted. It was decided to use the system composed with isoamyl alcohol as co-surfactant due its smallest solubility in water. The methodology to impregnate the microemulsion on the adsorbents was developed and to prepare each sample was used 10 g of adsorbent and 20 mL of microemulsion. The effect of drying time and temperature was evaluated and the best results were obtained with T = 65 ºC and t = 48 h. After evaluating the efficiency of the tested adsorbents it was decided to use chitosan and diatomite. The influence of the agitation speed, granule size, heavy metal synthetic solution concentration, pH, contact time between adsorbent and metal solution, presence or not of NaCl and others metallic ions in the solution (copper and nickel) were evaluated. The adsorption isotherms were obtained and Freundlich and Langmuir models were tested. The last one correlated better the data. With the purpose to evaluate if using a surfactant solution would supply similar results, the adsorbent surface was modified with this solution. It was verified that the adsorbent impregnated with a microemulsion was more effective than the one with a surfactant solution, showing that the organic phase (kerosene) was important in the heavy metal removal process. It was studied the desorption process and verified that the concentrated minerals acids removed the chromium from the adsorbent surface better than others tested solutions. The treatment showed to be effective, being obtained an increase of approximately 10% in the chitosan s adsorption capacity (132 mg of Cr3+ / g adsorbent), that was already quite efficient, and for diatomite, that was not capable to remove the metal without the microemulsion treatment, it was obtained a capacity of 10 mg of Cr3+ / g adsorbent, checking the applied treatment effectiveness

Investigação histórica na formação de professores de matemática: um estudo centrado no conceito de função

In this study we analyzed the development of a teaching experience, involving students with a bachelor s degree in mathematics from UFRN, based on the history of mathematics and mathematical investigations with the aim of contributing to the improvement of the teaching-learning of mathematics. The historical investigation tasks were planned and applied in the classroom, focusing on functional thought. The results obtained during the experience were described and evaluated based on authors who support the assumption of investigation and history as an alternative to the learning of mathematics. We emphasize that the material of analysis consisted of a work diary, audio recordings, questionnaires with testimony of the students involved, and, in addition, the assessment of the teacher of that subject. With regard to the mathematical content, the study was restricted to the concept of function, forms of representation and notation. It was evident that students showed great improvement with regard to the necessary formalization of the mathematical contents which were focused on, and to the active involvement of the students at different stages of the study. We can affirm that the completed study certainly represents significant contributions to an approach in the teaching-learning of functional thought

Despertando responsabilidade social no ensino médio por meio de temáticas associadas à física nuclear

Many discussions about the role of the school are on the agenda, in an increasingly complex society. Sociologists, educators, anthropologists, researchers of different areas seek that role. The objective of this dissertation is to contribute what we can consider the central role for the physics teaching, citizenship training. We have elaborated a didactic proposal to increase the interest of high school students on issues of social relevance and, throughout it, to promote the formation of attitudes of social responsibility, enhancing the formation of a more politically and socially active citizen. For the preparation of the proposal, studies were made on education for citizenship and on attitudes change, using as its main theoretical foundation the researches on the Science, Technology and Society curricular emphasis. The teaching of Nuclear Physics was integrated to our proposal, due to its pedagogical potential for the discussion of social, political and economic subjects related to scientific concepts and associated technologies. The educational proposal we have produced was applied on a high school class of a private school at Natal-RN. It was composed from the controversial issue involving the installation of nuclear power plants in Brazilian northeast. The methodology of role playing, in which students assumed social roles and produced specific subsidies for a public hearing and a later referendum, both simulated. In the analysis of the implementation of the proposal, we highlighted the difficulties but also the possibilities and the relevance of exercising skills such as reasoning, finding information, and arguing about of social problems. The results of the research showed the possibility of meaningful learning on Nuclear Physics contents, through this social, political, economic, scientific and technological contextualization using a controversial and real issue together with mechanisms that trigger for greater popular participation, as public hearing. It has also been identified changes in attitude by some students about issues related to Nuclear Physics. We hope, through this dissertation, to contribute to the formation of future citizens as well as to the initiative of teachers-researchers with pedagogical aims similar to those in the present work

Ensino por investigação: contribuições de um curso de formação continuada para a prática de professores de ciências naturais e biologia

Normally initial teacher training has not been sufficient to provide all the tools for an updated and efficient teaching practice. It is presented here one of the ways of working the completion of the initial training through a course of continuing education. This course is based on inquiry teaching which is considered an important teaching strategy for science education. This kind of teaching enables improvement of students reasoning and cognitive skills, the cooperation among them, the understanding of the nature of scientific work, and the motivation to think about the relationship between science, technology, society and environment. For this dissertation a course of continuing education based on this approach was followed in order to evaluate which contributions it can bring to the teaching practice. The course was followed based on three stages: on the first there was a questionnaire and an informal interview; next it happened through participant observation with audio and visual aid; the third stage happened through semi structured interview. The collected information was analyzed based on Content Analysis. An inquiry teaching pedagogical material was produced for the course including some examples and applications of this approach. The aim of the material is that it can be a support for the teachers after de course. The results allowed seeing that the course was very useful, different from the traditional and the teachers that put the approach to use found it to be very positive. Thus it can be said that some of the teachers who participated will try again to apply it, try to contextualize more the teaching situations with the students day to day life, as well make them more active and critic. We can also gather from the study, that the inquiry teaching is a very different tool from what the teacher was taught and is accustomed to use and the theoretical comprehension, acceptance and practice change is a complicated process and demands time

Interação em sala de aula de língua inglesa: o feedback como estratégia do desempenho assistido

This dissertation aims at characterizing the practices as well as the effects of a teacher s feedback in oral conversation interaction with students in an English Language classroom at a Primary School, 6th Grade in Açu/RN, Brazil. Therefore, this study is based on Vygotsky s (1975) and Bruner´s (1976) researches, which state that the learning process is constructed through interaction between a more experienced individual (teacher, parents and friends) and a learner who plays an active role, a re-constructor of knowledge. It is also based on Ur´s (2006) and Brookhart s (2008) studies (among other authors in Applied Linguistic) who defend that the feedback process needs to be evaluative and formative since it sets interfaces with both students autonomy and learning improvement. Our study is based on qualitative, quantitative and interpretive researches, whose natural environment (the classroom) is a direct source of data generated in this research through field observations/note-taking as well as through the transcriptions of five English classes audio taped. This study shows the following results: the teacher still seems to accept the patterns of interaction in the classroom that correspond to the IRE process (Initiation, Response, Evaluation) in behaviorist patterns: (1) he speaks and determines the turns of speech; (2) the teacher asks more questions and directs the activities most of the time; (3) the teacher´s feedback presents the following types: questioning, modeling, repeated response, praise, depreciation, positive/negative and sarcasm feedback, whose functions are to assess students' performance based on the rightness and wrongness of their responses. Thus, this implies to state that the feedback does not seem to help students improvement in terms of acquiring knowledge because of its normative effects/roles. Therefore, it is the teacher´s role to give evaluative and formative feedback to a student so that he/she should advance in the learning of the language and in the construction of knowledge

Representações discursivas no discurso político. Não me fiz sigla e legenda por acaso : o discurso de renúncia do senador Antonio Carlos Magalhães (30/05/2001)

O objetivo deste trabalho é investigar como as representações discursivas do locutor e dos alocutários são construídas no discurso de renúncia ao mandato de senador, proferido por Antonio Carlos Magalhães (ACM), na 62ª sessão deliberativa ordinária, em 30/5/2001. A perspectiva teórica que adotamos situa-se no campo da Linguística do Texto, com foco na abordagem da Análise Textual dos Discursos ATD (Adam, 2011). A noção de representação discursiva apresentada pela ATD constitui um dos aspectos da dimensão semântica do texto e baseia-se parcialmente nos trabalhos de Grize sobre a esquematização (1990, 1996). Complementamos as categorias de análise com contribuições que nos permitem detalhar a expressão linguística, textual, e discursiva das representações discursivas (Neves, 2006; Castilho 2010; Rodrigues, Passeggi, Silva Neto, 2010; Rodrigues et al. 2012; Passeggi, 2012). O enfoque metodológico é qualitativo, descritivo e interpretativista (Minayo, 1994; Trivinõs; 1987; Gil, 2002). Os procedimentos de análise utilizam as categorias semânticas de referenciação, predicação, modificação (de referentes e predicações), localização espacial e temporal, conexão e comparação. A representação discursiva do locutor (ACM) é constituída pelo conjunto de representações mais específicas, expressas nas referenciações e nas suas modificações: vítima; político; sigla; baiano, nordestino; presidente do senado; senador confiante; condenado. ACM, como protagonista, assume sempre a sua voz no discurso, manifesta seus pontos de vista e posiciona-se como sujeito ativo, consciente da importância do seu papel político e social, que o torna alvo e vítima das ações dos adversários. Complementando essa referenciação, as predicações e suas modificações se expressam através de verbos de ação, em especial, verbos na 1ª pessoa do singular que marcam o tempo presente, real e conclusivo de ações que constroem um cenário positivo para si mesmo. A localização temporal e espacial, indica as ações realizadas pelos participantes nas diversas etapas temporais selecionadas pelo texto, articuladas a três espaços principais: o Senado Federal, o Brasil e, naturalmente, a Bahia. Por sua vez, conectores adversativos (sobretudo, mas ), explicativos e condicionais acompanham e estruturam o ritmo argumentativo do discurso de renúncia de ACM

Samba e negritude: práticas discursivas identitárias negras em sambas de enredo de temática africana

The study object of this thesis is the process of affirmation, (re)construction and (re)signification of the black identities in the discourses which cross the samba-enredo of African theme of the samba schools belonging to the elite group from the carioca carnival, in the period from 1960 and 2007. The main question which guides this research is the following: How does this discursive process occur and which are the possible effects resulting from it? This research aims to understand, through interpretation gestures of such discourses and from those which undergo the interview statements and the answers given to the questionnaires applied to spectators and parade exhibiters of these samba schools, in what way the negritude conception and the citizenship practice of the black Brazilian people, especially those from Rio de Janeiro, can be affected by the meaning production circulating in the discursive practices of these sambas. The research was theoretically related to the Applied Linguistics, however it articulates theories originated from Cultural Studies and Ethnic-racial Studies as well as it presents some theoretical and methodological fundamentals from the Discourse Analysis of French line. As concerns the methodology, it is of interpretative, qualitative basis with procedures of discursive character. The interview analysis did not reveal, as consequence of the discourses circulating in the sambas, a direct involvement of the black people who were interviewed in struggle for their citizenship practice, but it pointed out sliding of meaning in regard to the negritude emergence

O Uso de operações linguístico-discursivas da crítica genética na reescritura de textos

As a professor in Curso de Licenciatura em Letras, from Campus Avançado Profa Maria Eliza Albuquerque Maia (CAMEAM),do Estado do Estado do Rio Grande do Norte (UERN), in the town of Pau do Ferros, in the state of Rio Grande do Norte, we had the chance to carry out several writing activities , as well as guiding re-writing activities for the texts produced. From this experience, we started looking at the need of reflecting upon the writing process in higher education. Thus, we aim at analyzing, in this research, the methodology used in the moment of carrying out the writing practices activities in higher education, investigating, in particular, the rewriting practices, concerning the operations used for carrying out such activities, as well as the sense effects produced from the alterations which were made in the texts. Our theoretical foundation is grounded on a conception of text as a verbal action , what reveals a socio-interactional view of the language (MARCUSCHI, 2008; SAUTCHUK, 2003). As the production of written texts, our research focus, we assume that, for this activity, we deal with distinct figures (active writer and internal reader), so that we can, apart from writing, reflecting upon our writing and, this way, deciding about operations which are carried out to make the alterations which are necessary to the rewriting of our texts (SAUTCHUK, 2003). Still about the theoretical foundations used in this research, we made use of the theories from the Textual Analysis of Discourse (TAD) which discusses the belief on the evidence on the existence of the texts, which is opposite to the fixist view of textuality which believes that the texts exist by themselves. (ADAM, 2008; [2005]2010). Under this perspective, we have also adopted, the concepts which come from genetics criticism which is concerned about the relation between text and genesis, using as objects documents which bring traits of the text in progress, on the ground that the text is the result of work in progress, and the writing practice, on the other hand, as an activity in a continuous movement (HAY, [1975]2002; DE BIASI, [2000]2010; GRÉSILLON, 1989; [1990]2008; [1992]2002; SALLES, 2008a). The methodology in this research is an ethnography-based one, an approach which focuses on the process, as well as is meaning-based. To understand the objectives proposed in our research, we made use of different procedures of collecting data which include an ethnographic study, such as: observation, note-taking, document analysis. The data which were analyzed were collected during the semester of 2008.2, in a first term classroom of Curso de Letras from CAMEAM, when we were able to collect twenty-one written texts and all of them were rewritten based on rewriting activities, what provides a corpus of forty-two texts which will be analyzed based on the linguistics operations identified by Generative Grammar and adopted by Lebrave and Grésillon (2009). From these analyses, we were able to confirm that writing is a process, and rewriting has become an extremely important activity for this process. Still due to these data, we observed that substitution was the most used operation by text authors. We believe that this result is justified by the fact that the substitution, according to what proposes the Genetic Criticism, constitutes the source of all erasure, from which one can easily make a change in writing. Regarding the operations of addition and deletion, we found that they were used in quantitative terms, almost equivalently, which can be explained when we see that the two operations require, by the author of the text, different strategies from those used for the replacement, what includes , respectively, adding or removing a segment. Finally, we found out that the shift operation was the least used, since it works with a segment that will not be replaced, added or deleted, but transferred to another place of text, which requires a greater ability of the author to perform this operation and not compromising the meaning of his/her writing. As a result, we hope to contribute to the reflection on the teaching of writing, considering, in a particular way, those with a Bachelor in Arts. Our analysis will contribute to the teaching of Portuguese language, specifically for activities that guide the production of texts in order to explore with students the ability to rewrite their own text

Nexus: da relacionalidade do princípio à metafísica do inominável em Nicolau de Cusa

We indicate the idea of nexus or conexio, thought of as intelligible connection with the intelligent, the foundation on which the reason why you can understand and name, even if inadequately, what the intellect sees incomprehensible and unnameably. Thus, it opens a way for our research: we will take the idea of nexus as fundamental to the interpretation of the divine names and the "metaphysics of the unnameably" and we show how the divine names, mainly in possest, mirrored in the Trinity, relatedness of the principle and therefore also the nexus. For that you need to think some preliminary questions: we will place Nicholas of Cusa in the tradition of medieval Christian Neoplatonism, we resume some discussions on the problem of naming and the philosophy of language in his thinking, we will reflect such thinking is molded from active dialogue with the tradition and how it is your speculation is founded upon the dynamic and dialectical relationship between philosophy and theology to be thought of in our text using the relationship between faith and understandig (intellectus). After introductory clarify these issues we will come to consider introductory understanding of the Trinitarian Beginning and speculation about the nexus taking as its starting point from where the De venatione sapientiae nexus or conexio is designed as a hunting field of wisdom and the First Book of De docta ignorantia where the maximum is now thought of as one and triune. From the Second Book of the same work and the Idiota. De mente we will show in what sense the universe and men, as imago dei, imitate the eternal Trinity. Finally, we will resume the notion of the scientia aenigmatica of De beryllo and some information that will clarify that Nicholas assumes the divine names as enigmas. Finally, we will try to show that the enigmatic or symbolic names also mirror the triune Beginning principle. So, before we return some traces of this aspect in some divine names and texts of the "late period" and then conclude with that which in itself already indicates the nexus and therefore the trinity: possest

Modelos auto-similares para rádio fontes extragalácticas.

This work is a detailed study of self-similar models for the expansion of extragalactic radio sources. A review is made of the definitions of AGN, the unified model is discussed and the main characteristics of double radio sources are examined. Three classification schemes are outlined and the self-similar models found in the literature are studied in detail. A self-similar model is proposed that represents a generalization of the models found in the literature. In this model, the area of the head of the jet varies with the size of the jet with a power law with an exponent γ. The atmosphere has a variable density that may or may not be spherically symmetric and it is taken into account the time variation of the cinematic luminosity of the jet according to a power law with an exponent h. It is possible to show that models Type I, II and III are particular cases of the general model and one also discusses the evolution of the sources radio luminosity. One compares the evolutionary curves of the general model with the particular cases and with the observational data in a P-D diagram. The results show that the model allows a better agreement with the observations depending on the appropriate choice of the model parameters.