Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Estudo da secagem do feijão verde (Vigna unguiculata L. Walp) - análise experimental do processo combinado leito fixo/leito de jorro

Green bean is considered as one of most traditional Brazilian Northeast dishes. Green beans drying preliminary experiments show that combine processes, fixed-bed/spouted bed, resulted in dehydrated beans with uniform humidity and the recovery of the beans properties after their rehydration. From this assays was defined an initial humidity suited for the spouted bed process. A fixed-bed pre-drying process until a level of 40% humidity gave the best results. The spouted bed characteristic hydrodynamic curves were presented for different beans loads, where changes in the respective beans physical properties were evidenced during the fluidynamic assay, due simultaneous drying process. One 22 factorial experimental design was carried out with three repetition in the central point, considering as entry variables: drying air velocity and temperature. The response variables were the beans brakeage, water fraction evaporated during 20 and 50 minutes of drying and the humidity ratio. They are presented still the modeling of the drying of the green beans in fine layer in the drier of tray and the modeling of the shrinking of the beans of the drying processes fixed-bed and spouted bed

A percepção da fiscalização dos contratos de mão de obra terceirizada pelos agentes envolvidos nesse processo no âmbito da Universidade Federal do Rio Grande do Norte: uma análise sob o modelo do principal-agente

Outsourcing has emerged as one of the new ways of guiding the work. For its advantages and be consistent with the paradigms of managerial reform, outsourcing also started to be used in the Public Administration. However, taking into account the particularities of the latter, some issues are relevant when outsourcing concluded with the State. Gains notoriety, for example, the step of monitoring these contracts, to the extent that, from this activity, we can avoid the negative effects of outsourcing like the fact that the state will pay for labor and wage liens that are obligation of the company providing the services. This study aims to understand the perception that this process is under the Federal University of Rio Grande do Norte, from the point of view of different stakeholders, also explaining the motivations that these agents have to perform the supervisory process. As a theoretical basis was used the Agency Theory, which reinforces the supervisory activities as a necessary means to minimize moral hazard and adverse selection, seeking to understand not only the different motivations tax contracts to properly perform their duties, but also analyze other phenomena arising from this contractual relationship. To achieve the proposed objectives, were taken a literature review and a presentation of how to organize the management and oversight of contracts in UFRN. The methodological procedures included questionnaires and interviews with those involved in the process. After analyzing the results obtained in the survey instruments , and also based on the laws, regulations and instructions governing the procurement process within the UFRN, it was concluded that the process of overseeing the outsourcing of labor contracts in UFRN is not fully institutionalized, some points should be strengthened in order to have the consolidation of this process, highlighting the need for training of UFRN servers that act as tax, the knowledge that the contractual penalties are applied effectively, the need that there is a supervisor of tax of contractors and also the realization of the rotation system of outsourced employees

Processo de trabalho em saúde: uma análise das condições de trabalho dos assistentes sociais no âmbito hospitalar

This paper presents the survey results: PROCEDURE FOR WORK IN HEALTH: an analysis of working conditions of social workers in hospitals. Analyzes the inclusion of social workers in work processes in healthcare, specifically in the public hospital, from the objective conditions of work, according to which materializes professional action. The aim is to understand them from the point of view of its relationship with users and other health professionals through the privatization of health, which prevents the Unified Health System (SUS), limiting the operation of the services and the guarantee of rights. The approach to the reality studied was through theoretical and methodological procedures based on the qualitative and quantitative research, focusing on documentary research, observation, semi-structured interview and the theoretical foundation. It is observed that the inclusion of social workers in this context arises from the demands derived from expressions of social issues, "raw material" of professional work, and the gaps resulting from contradictions in the process of rationalization / reorganization of the SUS, meaning that the needs the population are confronted with the content and form of organization of services. At the hospital, the professional actions are developed through the shift, space contradictory clash between the collective and individual, in which individual activities are prioritized and ad hoc unplanned and reduced to the solution of "problems" of users, through actions assistance in an emergency and bureaucratic. These findings emphasize the inadequacy of space and lack of minimum conditions of service to users, which undertakes the professional with regard to ethical and political principles of the profession, since it is the responsibility and duty of the social guarantee the secrecy and privacy of users what is revealed during the process of professional intervention. The professional social workers is permeated by the diversity of skills and competence; lack of planning activities, by incorporating the institutional discourse at the expense of professional goals, by knowing the Code of Professional Ethics, for small number of professionals, the increasing number informality; by poor working conditions and wages; by discouraging research and participation in social policy councils, as well as professional training

O sistema de garantia dos direitos da criança e do adolescente: análise da trajetória e do processo de resolubilidade dos casos de violência doméstica sexual em Recife PE (2007-2011)

This work discourses about the child and adolescent s Guaranty System of Rights (GSR), on the intervention in cases of juvenile domestic sexual violence, in Recife. The course (trajectory) is analyzed, where circulate cases of sexual violence, until its resolution, in (GSR). Actually, the violence represents a serious problem of public health. Was thought about the difficulties and the limits that make GSR become a full field of contradictions and challenges for the effectiveness of the children and adolescents rights. Therefore, it was verified the treatments that are developed by GSR, how this system is structured and articulated and how occurs the resolution of the sexual violence cases against children and adolescents. Proceedings of the quantitative and qualitative research were used, was done observation, directed interview and analysis of documents. Thus, the field research was the visits in these institutions: Restauração Hospital, Police Management of the Child and Adolescent (PMCA) three Guardianship Councils, Dom Helder Camara Center of Studies and Social Action (CENDHEC) and the Tribunal of Childhood and Adolescence. The research subjects were seven professionals of GSR. The theoretical discussion is guided in reflections about the children and youth rights, in the violence theme and in the construction and institutionalization process of GSR. In this experiment, was noticed there are many difficulties for working together the GSR, because many obstacles are found when we call the responsible institutions, besides some violence cases happen again. This system is not totally institutionalized and articulated, faces structural problems, material, poorly qualified professionals, underinvestment, low transfer of public resources, among other difficulties, causing many losses in the implementation of public policies that enforce secured rights by legislation

Análise sintagmática aplicada ao processo de sumarização automática de documentos do português brasileiro

This research studies the application of syntagmatic analysis of written texts in the language of Brazilian Portuguese as a methodology for the automatic creation of extractive summaries. The automation of abstracts, while linked to the area of natural language processing (PLN) is studying ways the computer can autonomously construct summaries of texts. For this we use as presupposed the idea that switch to the computer the way a language is structured, in our case the Brazilian Portuguese, it will help in the discovery of the most relevant sentences, and consequently build extractive summaries with higher informativeness. In this study, we propose the definition of a summarization method that automatically perform the syntagmatic analysis of texts and through them, to build an automatic summary. The phrases that make up the syntactic structures are then used to analyze the sentences of the text, so the count of these elements determines whether or not a sentence will compose the summary to be generated

Integração da simulação termoenergética com o processo de projeto: a análise de 6 casos

This work consists of the integrated design process analyses with thermal energetic simulation during the early design stages, based on six practical cases. It aims to schematize the integration process, identifying the thermal energetic analyses contributions at each design phase and identifying the highest impact parameters on building performance. The simulations were run in the DesignBuilder energy tool, which has the same EnergyPlus engine, validated. This tool was chosen due to the flexible and user friendly graphic interface for modeling and output assessment, including the parametric simulation to compare design alternatives. The six case studies energy tools are three architectural and three retrofit projects, and the author the simulations as a consultant or as a designer. The case studies were selected based on the commitment of the designers in order to achieve performance goals, and their availability to share the process since the early pre-design analyses, allowing schematizing the whole process, and supporting the design decisions with quantifications, including energy targets. The thermoenergetic performance analyses integration is feasible since the early stages, except when only a short time is available to run the simulations. The simulation contributions are more important during the sketch and detail phases. The predesign phase can be assisted by means of reliable bioclimatic guidelines. It was verified that every case study had two dominant design variables on the general performance. These variables differ according the building characteristics and always coincide with the local bioclimatic strategies. The adaptation of alternatives to the design increases as earlier it occurs. The use of simulation is very useful: to prove and convince the architects; to quantify the cost benefits and payback period to the retrofit designer; and to the simulator confirm the desirable result and report the performance to the client

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2