Estudo da formulação de massas cerâmicas provenientes da região do Seridó-RN para fabricação de telhas

This work has for objective study compared the characteristics and technological properties of ceramic bodies from the region of Seridó-RN. The region under study has identified 23 cities where they were 80 ceramics industries. To define the universe of search, there was a survey of pottery that are part of APL Seridó next to the IEL. The characteristics and operating conditions of ceramics industries of the region were identified through a socio-economic questionnaire applied locally, which addressed issues such as: profiles of companies, production process etc. The analysis of information collected from 24 companies identified in seven cities shows that the vast majority of industries is small, with family structure, obsolete equipment and labo, little qualified. Most of the pottery works with low technical knowledge, poor control of the production process and product technology. The raw collected were submitted to analysis of X ray diffraction, chemical composition, termical analysis, particle size distribution and plasticity. Then were produced five formulations and made by uniaxial pressure at 25 MPa for firing in temperatures varying from 850 to 1050 °C. The firing technological properties evaluated were: mass loss to fire, lineal shrinkage, apparent density, apparent porosity, water absorption and flexural strength (3 points). The results indicated that the raw materials from the region have significant similarities in the composition chemical and mineralogical. Furthermore, it indicates the possibility of the use of cycles of firing faster and efficient than the current, limited to some clay mass burning of certain conditions

Análise de viabilidade técnica de utilização da Fibra de bananeira com resina sintética em Compósitos

This paper aims to present the feasibility of using a composite using discarded material from the cultivation of banana tree (pseudostem), which is fibrillated together with synthetic resin replacing glass fiber to be used in structural elements that do not demand large mechanical stress such as reservoirs, troughs, domes, sewage pipes etc.. For this, there were studies about the mechanical properties of a composite made with polyester resin and fiber of banana tree (Musa sp, musac), in which the splints were removed from the pseudostem, being made fibrillation by hand, with the aid of a brush steel, followed by natural drying. After treatment for cleaning and removal of wax, the fiber was cut into pieces of approximately 60 mm to 100 mm, for, together with synthetic resin, make cards of a features fiber composite with random orientation relative to the weight of the resin. We used three different percentages of fiber (3%, 6% and 9%), in order to make a comparative study between them and what would be the one with the best performance. Were manufactured specimens of each material and then subjected to uniaxial tensile tests, three point bending, moisture absorption and thermal characteristics. The results show that, in general, the use of banana tree fiber is feasible simply by an improvement in the production process (machining of the procedure) and greater care in the manufacture of parts

Estratégias para elaboração de um plano de segurança da água para abastecimento humano do município do Natal/RN

This research study deals with the production and distribution of drinking water with quality and safety in order to meet the needs of the Man. Points out the limitations of the methodology for assessing water quality in use today. Approaches the recommendations of the World Health Organization (WHO) for adoption, by the companies responsible for producing and distributing water, of assessment methodologies and risk management (HACCP), in order to ensure the quality and safety of water drinking. Suggests strategies for implementing the plan for water safety plan. Uses the process of water production, composed by Maxaranguape river basin, the water treatment plant and distribution system, which is part of the Plan for Expansion of the Supply System of Natal, as case study. The results, it was possible to devise strategies for implementation of the Water Safety Plan (WSP), which comprises the following steps: a) a preliminary stage. b) assessment system. c) process monitoring. d) management plan and e) validation and verification of the PSA. At each stage are included actions for its implementation. The implementation of the PSA shows a new type of water production, in which the fountain as a whole (watershed and point of capture), the Water Treatment Plant (WTP) and distribution, shall compose the production process, over which to build quality and safety of the final product (drinking water)

A produção do gênero monografia em discursos de professores e alunos do curso de letras

A current worry in the teaching process at the university these days is text production process and genres produced there, especially those kind of writing that is concerned to course conclusion such as monograph, dissertation and thesis. From this perspective and considering our aims at understanding discursive process involved in the production of monograph genre at the university we want to analyze teachers and students discourses about the productive process of monograph in Letras Course, considering the guide, writing and specific aspects of that genre. To get the aims, we took as background theory the studies by Bakhtin linked to Utterance Linguistics with foundation concepts in Discourse Text Analysis by Adam (2010), and finally the studies developed about text production at college. This way, this work is based on a qualitative research and in data ethnographic procedures, they are: the observation in locus, as well as the application of questionnaires with opened questions to ten students and six teachers from Letras Course. The discourse analysis from the subjects reveal us that: i) the monograph production and the guidance are form of act by language, that need take into account in its development: students free chose as a principle in writing monograph, as well as a wide involvement between the teacher and the student in a sense to turn the writing better, among other aspects; (ii) there is a need to articulate monograph project and the text produced, considering that the guide process comes from a project written before; (iii) there are a number of role to discourses by teachers and students to the function of student and guide teacher, in a way that both can see the same assumptions in teachers and students discourses; (iv) teacher s and students discourses show that they assume the utterance responsibilities by the content of utterances proposed, they also show the voice from methodology guidebooks to monograph texts. So, we conclude that this research has some contributions to teach writing production at the university, especially to monograph in the ending of the courses. It can also be helpful in developing research in this area, mainly at the question about guide final works at college

Utilização de rejeitos de Caulins na Síntese de Zeólita A

Three studies were performed using tailings kaolin for the synthesis of zeolite A. The first synthesis of zeolite A was performed using a kaolin waste generated from the beneficiation of kaolin for paper production process was studied. The kaolin waste was thermally activated at a temperature range of 550-800°C. For comparison was performed a synthesis pattern of Zeolite A(procedure IZA). The prepared materials were characterized by 27Al MAS NMR, X-ray diffraction and scanning electron microscopy with microprobe rays. The pre-tramento proved to be the most appropriate and suitable temperatures are between 600 and 700°C. Observed the formation of zeolite A in all materials, reaching 52% crystallinity, and the presence of phase sodalite and amorphous material. The second study was the use of a highly reactive metakaolin originating from the Jari region in the synthesis of zeolite A by a new method of hydrothermal synthesis. The zeolite is obtained pure and highly crystalline employing the Jari kaolin calcined at 600 ° C for 2h when the transformation to metakaolin occurs. Get to zeolite phase A at 4pm. The best crystallization time was of 24 h afforded a crystallinity of 67.9%. The third study was the evaluation of the NaOH / metakaolin and crystallization time on the synthesis of zeolite NaA from a sample of kaolin waste, named Kaolin Coverage. The experiments were performed using statistical design (axial points) and rejoinder the center point. The samples were characterized by X-ray diffraction (XRD), scanning microscopic analysis and chemical analysis using an EPMA microprobe. The results showed that a relationship exists between the amount of NaOH added and the crystallization time. The experiment performed using the lowest ratio NaOH / metakaolin (0.5) and shorter (4 h) produced an amorphous material. The increase ratio of NaOH / metakaolin and crystallization time leads to formation of a more crystalline NaA phase, but the presence of phase with sodalite as impurities

Turismo, território e políticas públicas: uma análise do destino João Pessoa/PB

This study presents an approach to tourism activity from the perspective of the territory, analyzing the importance of the roles of the State and public policies for tourism development. Tourism in the northeastern region of Brazil begins to take its rise from the late 1970 through public policies, whose goal was to provide the necessary conditions for tourism development. The tourism public policies were the key elements in the production process of tourist territories in the region. In the state of Paraíba, the public authorities elected the coastline as the main attraction and the state capital, João Pessoa, as the locus for the tourism development, with the city receiving a series of public policies. In this context, this research aims to analyze the development process of three specific public policies for tourism development in João Pessoa: The (mega)Projeto Costa do Sol (1988), the PRODETUR/PB I and II (1997 e 2005) and the Plano Estratégico de Desenvolvimento do Turismo na Paraíba, the Plano Amanhecer (2000). This study was guided by the question that even having been contemplated by the tourism public policies, João Pessoa still remains in a peripheral position in the regional tourism market. The methodological procedures for this study were literature and documents research and semi-structured interviews with tourism public officials and representatives from local tourism trade. The research came to prove that the discontinuity between governmental administrations hampered the implementation process of the tourism public policies studied. It was observed that the implementation of tourism public policies in the long term depends on the interaction between governments, as well as the collective political will to develop tourism in Joao Pessoa

A mineração artesanal e de pequena escala em pegmatitos e cerâmica no município de Parelhas, região do Seridó/Rio Grande do Norte

The working conditions, occupational health, occupational illness and workers quality of life, usually referring to the artisanal activities and the workers with a poor professional support. Because this reality is still present in locals without good infrastructure of social and economic attention, there is a need for a broad knowledge of problems related to the productive processes that include features of unsanitary and unhealthy. Despite the intense process of industrialization promoted by globalization and the growth of developing nations like Brazil, the activities of artisanal and small-scale mining are still suffering from the marginalization of their production processes and their workers. This dissertation deals with the description of mineral-based activities (MBA), especially the activities related to production processes of extraction and processing of red pottery and minerals in pegmatites in Parelhas city, Seridó, Rio Grande do Norte, which are conducted by small mining companies or artisanal miners. The study of the work process was based on direct observation, photographic documentation, ergonomics, health and occupational safety analysis, interviews and structured questionnaire with workers of the two activities. The results indicate the need for improvement in both workplaces (red pottery and pegmatites), adaptation of workers to safety standards specific to the workplace, more attention and care related to ergonomics and occupational safety, greater importance to economic and social relations among performed activities, workers and firms of mineral branch and better and greater integration of social policies, supported by different sectors of society with the intention of transforming the current social, cultural, labor and education situation

A participação dos residentes no processo de produção do território turístico em Canoa Quebrada-CE

The work present entitled the participation of resident in the production process of the tourist territory in Canoa Quebrada/CE has as objective analyse of which form the site population participates of the manufacturing process and appropriation of the territory s tourist Canoa Quebrada CE , in period undestood between from 1980 to the present day. The theoretical variable about which rest this search is the concept the territory expressed in the manifested in the process deterritorialization that always appears in conjuction whith the reconstruction of territories, in other words, the process of repossession. The migratory movement of new residents acts in the new sociospatial configuration that location, form new territoriality and (de) territorializing in space turistificado reflected dialectically through the emergence of a new sociospatial setting consisting of forms and images expressed physically in place.Finish the job showing that the participation of resident native and nonnative in the production process of the tourist territory in Canoa Quebrada occurred unevenly characterized by dominance of a small group, who has control of the practice of this activity, thus appears that tourism can be tendentious, since a large portion of the population does not benefit from their results, having a exclusion with various impacts that directly affect the everyday social population

Incrustação em poço produtor de petróleo e gás natural: um estudo de caso

Water and gas is a common by - product of the oil production process. Production may be compromised by the precipitation of inorganic salts in both the reservoir and producing well, through scale formation. This precipitation is likely the cause of the formation damage. High temperatures and h igh pressures (HTHP) may favor the precipitation of insoluble salts. The most common types of scale in oil fields are calcium carbonate and calcium sulphate, strontium and barium sulphate. New types of scale formation have attracted special attention such as zinc sulphide and lead. This precipitation may occur in the pores of reservoir rocks, in the production string and in equipment, causing obstructions and consequent production losses. In this study, the influence of well depth on incrustation compositio n was investigated to design removal treatments and assess the behavior of these deposits along the string, through the analysis of pressure and temperature. Scale residues were recovered from the inside of the production string of an oil and gas well duri ng the string removal operation. A total of 10 samples from different depths (15.4 m to 4061.5 m) were obtained. Initially a dissolution test was conducted in weak acid, similar to that used in removal operations with this type of scale formation. Majority composition was defined and confirmed by dissolution tests using X - Ray Fluorescence Spectroscopy (XRF), X - Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) techniques. Residues with distinct characteristics were observed in different proportion s, showing a tendency toward increased and/or decreased mass with depth. In the samples closest to the surface, typical sandstone residues were found, with calcium (45% Ca) as the metal of highest concentration. The obtained results indicate correlations o f the scale types studied with the depth and, consequently, with the thermodynamic conditions of pressure and temperature.

Produção do espaço e reestruturação produtiva do setor de laticínio no Rio Grande do Norte

Since the 1970s, Brazil has gone through several changes in its economic and productive structures, which have symbiotic relationship with the organization and dynamics of the Brazilian territory. This set of economic, social and technical-scientific transformations developed in the amid the productive capital restructuring, a process that occurs on a global scale, but that effective with particularities in different places. Adopting this presuposition the present research had as main objective analyze the productive restructuring of the dairy sector in Rio Grande do Norte, highlighting its relationship with production process / organization of space and its impact on the social relations of production. The adopted methodology to elaborate of this study was based on the achievement a bibliographic review with regard to proceedings of production of space and productive restructuring, document research about the dynamics of the dairy sector in Rio Grande do Norte, as well as on regulatory instructions governing the dairy production in Brazil, we achieve parallel secondary data collection, with official organs such as IBGE, EMATER and SINDLEITE. Another important methodological resource was the realization of the field research, which enabled us to empirically understand the distinct realities lived by agents acting on milk production system in Rio Grande do Norte. The analyzes performed nevertheless evidence that the restructuring process in the dairy sector is fomented, greatly by state,that finance, encourages and normatizes the production of milk in the country. In the specific case of Rio Grande do Norte, this process is boosted by the creation of "Programa do Leite," which by constituting of an institutional market, contributes to the strengthening and expansion of industries, the detriment of the artisanal processing sector. Nevertheless family farmers continue to act in the activity, be only producing and trading fresh milk, supplying milk to processing units, mediating the production of their peers or by the craft benefiting milk in traditional cheese factories presents in the entire state of Rio Grande do Norte. The results reveal that it is a complex web of social relations of production that are established at the heart of laticinista activity in the Rio Grande Norte, these are summarily marked by relations of competition and complementarity between industrial and artisanal processing of milk

Vazios urbanos e a dinâmica imobiliária na produção do espaço em Natal

In Brazil, the discussion about the urban voids appear related to the capitalist urban expansion process, when the urban growth act the cities were expanding toward the periphery, leaving in the interstices vacant land, kept out of the market waiting for the real estate valuation. In Natal, the formation of voids was triggered by the process of fragmentation of space promoted mainly by the urban sprawl with the emergence of new neighborhoods, lots of openings, housing developments and the emergence of new lines of commercial centrality. In this sense, this study aims to understand the role played by urban voids in the real estate dynamics and the production process of the Natal city space. For this, it was adressed the concept building on the conception of different authors and were characterized four types of gaps that best explained the phenomenon in the context of the work proposal addressed, such as idle, empty expectant, empty-brownfield areas and institutional areas. For each of these events were considered an example in the general context of the city through semi-structured interviews with technicians, managers and public officials in promoting the city and /or related to management of urban voids.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Um olhar sobre a música gospel: a lógica simbólica e de mercado do Ministério de Louvor Diante do Trono

This study aims to understand how the gospel music genre - based on the gospel band Ministério de Louvor Diante do Trono - articulates itself to the logic of the market by its insertion in the music industry and use of symbolic logic in the available songs of their Cds and DVDs. Our research is a case study, methodologically being the descriptive analysis of the production process, distribution and broadcasting of the band's CDs and functional analysis of the music that permeates the entire thesis. The following songs are presented as an analytical corpus: Preciso de Ti,Quero me Apaixonar, Tua Visão, Creio, Tu Reinas e Tetelestai. Our hypothesis is that religious institutions - as a field responsible for the structure which maintains gospel artists - experiences a new dynamic that consists of a superficial modernity, ratified in the ways the symbolic goods produced communicate, that is, simulate a religious modernity maintaining traditional values regarding the dogmas of religion , but incorporate business and advertising procedures in the dissemination of its products The results point to gospel music as mediation, part of the religious ritual sometimes as prayer and other as preaching, stimulating consumption and entertainment, and performing as a device in the making of symbolic goods.

A confiança interorganizacional nas compras

This research is part of the field of organizational studies, focusing on organizational purchase behavior and, specifically, trust interorganizational at the purchases. This topic is current and relevant by addressing the development of good relations between buyer-supplier that increases the exchange of information, increases the length of relationship, reduces the hierarchical controls and improves performance. Furthermore, although there is a vast literature on trust, the scientific work that deal specifically at the trust interorganizational still need further research to synthesize and validate the variables that generate this phenomenon. In this sense, this investigation is to explain the antecedents of trust interorganizational by the relationship between the variable operational performance, organizational characteristics, shared values and interpersonal relationships on purchases by manufacturing industries, in order to develop a robust literature, most consensual, that includes the current sociological and economic, considering the effect of interpersonal relationships in this phenomenon. This proposal is configured in a new vision of the antecedents of interorganizational trust, described as significant quantitative from models Morgan and Hunt (1994), Doney and Cannon (1997), Zhao and Cavusgil (2006) and Nyaga, Whipple, Lynch (2011), as well as qualitative analysis of Tacconi et al. (2011). With regard to methodological aspects, the study assumes the form of a descriptive, survey type, and causal trace theoretical and empirical. As for his nature, the investigation, explicative character, has developed a quantitative approach with the use of exploratory factor analysis and structural equation modeling SEM, with the use of IBM software SPSS Amos 18.0, using the method of maximum verisimilitude, and supported by technical bootstraping. The unit of analysis was the buyer-supplier relationship, in which the object under investigation was the supplier organization in view of the purchasing company. 237 valid questionnaires were collected among key informants, using a simple random sampling developed in manufacturing industries (SIC 10-33), located in the city of Natal and in the region of Natal. The first results of descriptive analysis demonstrate the phenomenon of interorganizational trust, in which purchasing firms believe, feel secure about the supplier. This demonstration showed high levels of intensity, predominantly among the vendors that supply the company with materials that are used directly in the production process. The exploratory and confirmatory factor analysis, performed on each variable alone, generated a set of observable and unobservable variables more consistent, giving rise to a model, that needed to be further specified. This again specify model consists of trajectories was positive, with a good fit, with a composite reliability and variance extracted satisfactory, and demonstrates convergent and discriminant validity, in which the factor loadings are significant and strong explanatory power. Given the findings that reinforce the model again specify data, suggesting a high probability that this model may be more suited for the study population, the results support the explanation that interorganizational trust depends on purchases directly from interpersonal relationships, sharing value and operating performance and indirectly of personal relationships, social networks, organizational characteristics, physical and relational aspect of performance. It is concluded that this trust can be explained by a set of interactions between these three determinants, where the focus is on interpersonal relationships, with the largest path coefficient for the factor under study