Estudo da sinterização de eletrólito sólido de céria dopada com gadolínia

Fuel cells are electrochemical devices that convert chemical energy in electrical energy by a reaction directly. The solid oxide fuel cell (SOFC) works in temperature between 900ºC up to 1000ºC, Nowadays the most material for ceramic electrolytes is yttria stabilized zirconium. However, the high operation temperature can produce problems as instability and incompatibility of materials, thermal degradation and high cost of the surround materials. These problems can be reduced with the development of intermediate temperature solid oxide fuel cell (IT-SOFC) that works at temperature range of 600ºC to 800ºC. Ceria doped gadolinium is one of the most promising materials for electrolytes IT-SOFC due high ionic conductivity and good compatibility with electrodes. The inhibition of grain growth has been investigated during the sintering to improve properties of electrolytes. Two-step sintering (TSS) is an interesting technical to inhibit this grain growth and consist at submit the sample at two stages of temperature. The first one stage aims to achieve the critical density in the initiating the sintering process, then the sample is submitted at the second stage where the temperature sufficient to continue the sintering without accelerate grain growth until to reach total densification. The goal of this work is to produce electrolytes of ceria doped gadolinium by two-step sintering. In this context were produced samples from micrometric and nanometric powders by two routes of two-step sintering. The samples were obtained with elevate relative density, higher than 90% using low energy that some works at the same area. The average grain size are at the range 0,37 μm up to 0,51 μm. The overall ionic conductivity is 1,8x10-2 S.cm and the activation energy is 0,76 eV. Results shown that is possible to obtain ceria-doped gadolinium samples by two-step sintering technique using modified routes with characteristics and properties necessary to apply as electrolytes of solid oxide fuel cell

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Efeito da Gália como aditivo de sinterização em eletrólitos cerâmicos à base de céria sintetizados pelo método de complexação de cátions

Fuel cells are considered one of the most promising ways of converting electrical energy due to its high yield and by using hydrogen (as fuel) which is considered one of the most important source of clean energy for the future. Rare earths doped ceria has been widely investigated as an alternative material for the electrolyte of solid oxide fuel cells (SOFCs) due to its high ionic conductivity at low operating temperatures compared with the traditional electrolytes based on stabilized zirconia. This work investigates the effect of gallium oxide (Gallia) as a sintering aid in Eu doped ceria ceramic electrolytes since this effect has already been investigated for Gd, Sm and Y doped ceria electrolytes. The desired goal with the use of a sintering aid is to reduce the sintering temperature aiming to produce dense ceramics. In this study we investigated the effects on densification, microstructure and ionic conduction caused by different molar fraction of the dopants europium (10, 15 and 20%) and gallium oxide (0.3, 0.6 and 0.9%) in samples sintered at 1300, 1350 and 1450 0 C. Samaria (10 and 20%) doped ceria samples sintered between 1350 and 1450 °C were used as reference. Samples were synthesized using the cation complexation method. The ceramics powders were characterized by XRF, XRD and SEM, while the sintered samples were investigated by its relative density, SEM and impedance spectroscopy. It was showed that gallia contents up to 0.6% act as excellent sintering aids in Eu doped ceria. Above this aid content, gallia addition does not promote significant increase in density of the ceramics. In Ga free samples the larger densification were accomplished with Eu 15% molar, effect expressed in the microstructure with higher grain growth although reduced and surrounded by many open pores. Relative densities greater than 95 % were obtained by sintering between 1300 and 1350 °C against the usual range 1500 - 1600 0 C. Samples containing 10% of Sm and 0.9% of Ga reached 96% of theoretical density by sintering at 1350 0 C for 3h, a gain compared to 97% achieved with 20% of Sm and 1% of Ga co-doped cerias sintered at 1450 0 C for 24 h as described in the literature. It is found that the addition of gallia in the Eu doped ceria has a positive effect on the grain conductivity and a negative one in the grain boundary conductivity resulting in a small decrease in the total conductivity which will not compromise its application as sintering aids in ceria based electrolytes. Typical total conductivity values at 600 and 700 °C, around 10 and 30 mS.cm -1 respectively were reached in this study. Samples with 15% of Eu and 0.9 % of Ga sintered at 1300 and 1350 °C showed relative densities greater than 96% and total conductivity (measured at 700 °C) between 20 and 33 mS.cm -1 . The simultaneous sintering of the electrolyte with the anode is one of the goals of research in materials for SOFCs. The results obtained in this study suggest that dense Eu and Ga co-doped ceria electrolytes with good ionic conductivity can be sintered simultaneously with the anode at temperatures below 1350 °C, the usual temperature for firing porous anode materials

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Adição de poliuretana em pastas de cimento para poços de petróleo como agente de correção do filtrado

Chemical admixtures, when properly selected and quantified, play an important role in obtaining adequate slurry systems for quality primary cementing operations. They assure the proper operation of a well and reduce costs attributed to corrective cementing jobs. Controlling the amount lost by filtering through the slurry to permeable areas is one of the most important requirements in an operation, commonly controlled by chemical admixtures, such as carboxymethylcellulose (CMC). However, problems related to temperature, salttolerance and the secundary retarding effect are commonly reported in the literature. According to the scenario described above, the use of an aqueous dispersion of non-ionic poliurethane was proposed to control the filter loss, given its low ionic interaction with the free ions present in the slurries in humid state. Therefore, this study aims at assessing the efficiency of poliurethane to reduce filter loss in different temperature and pressure conditions as well as the synergistic effect with other admixtures. The temperatures and pressures used in laboratory tests simulate the same conditions of oil wells with depths of 500 to 1200 m. The poliurethane showed resistance to thermal degradation and stability in the presence of salts. With the increase in the concentration of the polymer there was a considerable decrease in the volume lost by filtration, and this has been effective even with the increase in temperature

Estudo do comportamento de pastas compósitas cimento/sílica/poliuretana para poços de petróleo HPHT

Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT

Monitoramento da morfologia costeira em setores da bacia potiguar sob influência da indústria petrolífera utilizando geodésia de alta precisão e laser escâner terrestre

The objective of this Doctoral Thesis was monitoring, in trimestral scale, the coastal morphology of the Northeastern coast sections of Rio Grande do Norte State, in Brazil, which is an area of Potiguar Basin influenced by the oil industry activities. The studied sections compose coastal areas with intense sedimentary erosion and high environmental sensitivity to the oil spill. In order to achieve the general objective of this study, the work has been systematized in four steps. The first one refers to the evaluation of the geomorphological data acquisition methodologies used on Digital Elevation Model (DEM) of sandy beaches. The data has been obtained from Soledade beach, located on the Northeastern coast of Rio Grande Norte. The second step has been centered on the increasing of the reference geodetic infrastructure to accomplish the geodetic survey of the studied area by implanting a station in Corta Cachorro Barrier Island and by conducting monitoring geodetic surveys to understand the beach system based on the Coastline (CL) and on DEM multitemporal analysis. The third phase has been related to the usage of the methodology developed by Santos; Amaro (2011) and Santos et al. (2012) for the surveying, processing, representation, integration and analysis of Coastlines from sandy coast, which have been obtained through geodetic techniques of positioning, morphological change analysis and sediment transport. The fourth stage represents the innovation of surveys in coastal environment by using the Terrestrial Laser Scanning (TLS), based on Light Detection and Ranging (LiDAR), to evaluate a highly eroded section on Soledade beach where the oil industry structures are located. The evaluation has been achieved through high-precision DEM and accuracy during the modeling of the coast morphology changes. The result analysis of the integrated study about the spatial and temporal interrelations of the intense coastal processes in areas of building cycles and destruction of beaches has allowed identifying the causes and consequences of the intense coastal erosion in exposed beach sections and in barrier islands

Variação temporal da riqueza de táxons, abundância e biomassa de artrópodes em ambiente de restinga do Rio Grande do Norte, Brasil

Arthropods are abundant organisms possess great wealth and diversity representing about 82% of all known animal species. Contribute as a source of biomass and their abundance is an indicator of ecological change. The aim of this study was to evaluate the biomass and abundance found in the salt marsh environment throughout the year and relate them to the climatic factors (temperature, precipitation and relative humidity) that can influence the abundance and biomass of arthropods. The study was conducted at the Centro de Lançamento de Foguetes Barreira do Inferno, city of Parnamirim, Rio Grande do Norte, in the period February 2011 to January 2012, using pitfall traps, stationary window and beating tray. Among the 26 orders found, the most abundant were: Hymenoptera, Orthoptera, Araneae. Taxa Hymenoptera, Blattodea and Orthoptera showed higher biomass volume. Climatic factors did not influence the fall of Arthropods in the traps, however, the lowest abundance during the rainy season the action of raindrops, reduced the activity of these arthropods on vegetation, reducing its capture in traps (pitfall traps and stationary window ) and method of collection(entomological umbrella)

Aborto em adolesecentes: Ato tão praticado e tão pouco conhecido

O aborto provocado na adolescência como problema de saúde pública, é tema deste estudo que teve como objetivo identificar os motivos que levam adolescentes a provocar o aborto. A multidisciplinariedade do Programa de Pós Graduação em Ciências da Saúde, da Universidade Federal do Rio Grande do Norte, proporcionou o convívio com vários pesquisadores, bem como contribuiu para a coorientação e o crescimento deste estudo e da Pesquisadora com aquisição de conhecimentos diversificados e inovadores. Estudo transversal, quantitativo, analítico, usou questionário semi-estruturado como instrumento que foi aplicado em dez escolas. Trabalhou-se com jovens do sexo feminino, dos 12 aos 19 anos de idade. A amostra representativa foi calculada considerando-se o número de internações por curetagens na cidade de Maceió em 2004. O Banco de Dados foi analisado pelo programa Epi Info versão 3.3.2. Foram usados os testes Quiquadrado, Odds Ratio, Risco Relativo e Regressão Logística. A amostra foi de 2592 jovens, numa distribuição normal, com idade média e mediana de 15 anos, desvio padrão de 1,7. A maioria das jovens era solteira (95,7%), não trabalhava (94,1%), residia com ambos os pais (66,2%) e conhecia algum método contraceptivo (95,5%). Do total das adolescentes estudadas, 52,4% estudava o nível educacional médio. Delas 21,6% tinham vida sexual ativa, 6,4% engravidaram e 5,7 % abortaram. A maioria (95,5%) afirmou conhecer algum método contraceptivo, destas 70,1% tinha mais de 15 anos e os métodos mais citados foram os de barreira/hormonal com 72,4%. Analisando o Risco Relativo observou-se que o risco era significativo e protetor para o começo da vida sexual antes dos 15 anos de idade. Apenas 32,4% delas citaram algum tipo de complicação o aborto. Foi significativa a relação entre a idade e as citações da morte, da esterilidade como a complicação do aborto. A maioria recebeu apoio para abortar (63,8%), amigas foram as que mais apoiaram (32,9%), sendo significativa a relação entre o apoio recebido para abortar e a pratica do ato. O motivo mais citado foi o medo da reação dos pais (57,7%), esteja este motivo apontado como único ou associado a outros. A análise de significância entre as variáveis dicotômicas, forneceu 8 variáveis significativas, 2 protetoras para o abortamento: idade de 12-14 anos e conversar com os pais sobre sexo. As demais variáveis: estado marital com companheiro, vida sexual ativa, gravidez anterior, uso de método contraceptivo, recebimento de apoio para abortar e necessidade de internamento pós-aborto, foram promotoras ao abortamento. Receber apoio para abortar foi a mais significativa para abortar, estado marital com companheiro foi fator de proteção para o ato. Conclui-se que o apoio para abortar foi a variável mais significativa deste estudo reforçando a importância do grupo na adolescência. Sugere-se maior atenção as ações educativas como prevenção para riscos na saúde reprodutiva dos jovens

Seleção de categorias da Classificação Internacional de Funcionalidade, Incapacidade e Saúde para avaliação do paciente com acidente vascular cerebral em reabilitação

Stroke represents the first cause of disabilities among adults. Although different professions work together in treatment of stroke patients, all they use different terminologies for the description of the patients problems and it can constitute an impediment in the communication between the staff members. Thus, the multidisciplinary and interdisciplinary work would be facilitated if using a reference common tool, as the new International Classification of Functioning, Disability and Health (ICF). However, the ICF is very extensive and complex and due to its complexity, it has been evidenced the necessity to select its categories to become it more practical. The aim of the study was to investigate which categories of the ICF are more suitable to evaluate and to describe the stroke patient in the view of teachers and municipal public health professionals. It was a descriptive research, which involved 5 professors and 11 professionals of Physiotherapy that have worked at the health public area in Natal / RN. It was used the Delphi Technique in 3 rounds and the Likert Scale to select the categories among the ICF components. As result, from the 362 IFC categories, 94 were selected. The selected categories correspond to rehabilitative characteristics of Stroke patients in the universe of the Physiotherapy performance. The methodology applied was suitable to the studied object emphasizing the necessity of future studies for validation of the chosen categories

Caracterização sócio-demográfica, ocupacional e de formação profissional de manipuladores de alimentos e bebidas em uma capital da região nordeste do Brasil

Universidade Federal do Rio Grande do Norte

Aplicação de nanopartículas de quitosana com potencial de adjuvante na produção de soro contra o venneno do escorpião Tityus serrulatus

In Brazil, several species of scorpions are known to cause accidents which can lead to death, which are mainly belonging to the genus Tityus. The scorpion Tityus serrulatus is the main responsible for more severe cases. Anti-scorpion serums are routinely produced by various institutions, despite their effectiveness, quality and action depends on how quickly treatment is started. Studies have been developed in the search for appropriate technologies to encapsulate and release recombinant or natives proteins capable of inducing antibody production. In this context, chitosan copolymer which can be obtained from the partial deacetylation of chitin or in some microorganisms and it is biocompatible and biodegradable has been widely used for this purpose. This study aimed to search for a system release from chitosan nanoparticles for peptide / protein of the venom of the scorpion T. serrulatus, able to provide a new model of immunization in animals, in order to obtain a potential novel polyclonal serum, anti-venom T. serrulatus. The chitosan nanoparticles were prepared by ionic gelation with polyanion tripolyphosphate (TPP). After standardizing the concentrations of TPP and chitosan was evaluated the efficiency of incorporation of bovine serum albumin (BSA) and scorpion venom, showed particle size compatible with the intended purpose. The particles showed adequate size around 200nm. The crosslinking was confirmed by absorption spectroscopy in the infrared. After verified the high encapsulation efficiency (EE) for acid bicinconínico method (BCA) protein assay and the particle size distribution, the success of the technique was proven and the potential for in vivo application of nanoparticles. The experimental animals were vaccinated and the antibodies measured by ELISA

A dimensão simbólica e midiática da política e a história da dona de casa que virou guerreira : a construção da imagem pública de Wilma de Faria em 2002 e 2006

This paper examines two aspects. First, the symbolic dimension of politics and some of the elements that make up this universe, as the scenario, the representation, the myth, the spectacle, the media and the political and electoral marketing. We assume that the policy brings together a set of traits related to both reason and the human subjectivity, and can not be summed up in just a few calculations based on rationality. In the case of elections, in a process (ritual, according Irlys Barrier) of choice, there is a meeting of two systems of representations: to that transmitted by a political actor, in a scene from a particular context, based on a life trajectory unique, and the other from the public, crossed by social relations, situations own wishes, desires, expectations and unique perspectives. Between them there are the means of mass media (especially television), and with them the advent of language media and advertising applied to politics, changing the layout of public visibility and inaugurating what Rejane Accioly Carvalho will call the "aesthetics of mostrabilidade". This does not necessarily mean a preponderance of media on politics as a whole but only its adaptation to that with regard to contact with the public, the ad extra portion of the policy, according to Wilson Gomes. In a second aspect, try to apply these elements to a specific study to verify them in building an effective public image, in this case, the current governor of Rio Grande do Norte, Wilma de Faria. The concept of public image is from the book of Wilson Gomes The transformation was visible in the mass media, and relates to a conceptual image to fix "personality traits" through political history, personal conduct, action of image makers and the public reception. For this we will review some videos aired on Free Time for political propaganda in the years 2002 and 2006.

Mulheres na Política e Autonomia

The proposal of this study was to work with women in the politics, focusing on their trajectories, biographies and speeches, to catch the meanings given by themselves to their insertion in the political field. The privileged instrument of research was the autobiographical narratives of fifteen women who, in Paraíba, had participated of the electoral processes and the life partisan politics in the period from 1998 to 2008, in the state and federal scopes. This permitted us to search the dimension of their lived expericence, to understand the trajectories and the processes of autonomation of the women, in the politics. Moreover, a quantitative mapping of the feminine presence in the processes was made electoral politicians in a wider context. In a similar way, two surveys had been carried throughout the research, among others aspects, to understand that image voters and politicians they construct concerning the feminine participation in this field. These instruments were important not to lose of all the social view where these lives were developed, the places from which these women speak and locate and the social meanings originated from this participation. The research aimed to establish dialogues between knowing and fields of discipline, beyond the dichotomy of actor/structure, preventing generalizations that ignore the plurality of the individuals, to reveal some aspects of the complex and contradictory processes that involve their participation in the political field. At last, it is tried to show that, although the frequent accusations of autonomy lack, when establishing relations in the public space, the women, as all subjects, can reflect about themselves, the motives of their thoughts and their actions escaping from the servitude of the repetition and avoid being only product of the institution that formed them (CASTORIADIS, 1992, p.140-141)

O voto e seus enigmas: A dimensão subjetiva das escolhas eleitorais

Ce travail analyse la portée subjective des Choix Électoraux à travers la notion psychanalytique du désarroi humain. Nous avons développé cette recherche ayant pour référence la pensée de Freud et de Lacan et suivant les jalons posés par les penseurs des sciences sociales nous nous sommes rapprochées de la réalité sociale pour y « atteindre sur son horizon la subjectivité de notre époque ». La condition de désarroi fait partie de la structuration du sujet, du fait qu il dépend entièrement de l Autre pour se construire. Cependant l être humain se crée des mécanismes pour se protéger du désarroi absolu, il trouve des arts de vivre qui lui rendent plus facile sa condition d être. Les idéaux, les pactes sociaux ce sont des modalités de sécurité sans lesquelles le sujet fixe ses particularités sans s engager dans le processus civilisatoire. Nous caractérisons la société contemporaine par la chute successive d une série d idéaux qui fait monter de plus en plus le désarroi. Dans l absence d idéaux sociaux et politiques sur lesquels l électeur puisse se repérer, nous remaquons une tendance vers l individualisme et vers l absence d investissements dans des projets colectifs. Cette façon d opérer se dévoile aussi au moment de choisir un candidat, ce qui se base sur la logique du particulier motivée par des perspectives individuelles, sans liens avec la promotion de la vie publique. Notre enquête a été réalisée à Natal durant la campagne électorale de 2002. Notre objectif est de comprendre surtout la logique des choix électoraux de la population de la périphérie, celle qui se trouve devant un double désarroi : celle de sa condition humaine et celle qu advient de la précaire condition de subsistance. Nous soutenons que l idée selon laquelle le candidat, par la position qu il occupe dans la société, détient la fonction d offrir quelques garanties à l électeur et de cette manière il entre dans la série de ce qui peut soulager et promouvoir un certain réconfort aux personnes, même si l on considère le fait que l électeur ne croit plus à ses représentants. Nous sommes partis des questions suivantes: comment identifier la dimension subjective des choix électoraux et de quelle manière celle-ci se manifeste-t-elle de nos jours ? Comment se passe le choix éléctoral de la population qui est à la marge du système? La thèse que nous soutenons est que l état de désarroi est un substrat subjectif qui est la base de tout choix éléctoral mais qui se configure de façon différenciée à partir des références de l électeur, de son contexte historique, des facteurs économiques, etc. Le sujet, face à son désarroi, construit des chemins pour pouvoir soutenir son existence ce que nous appellons ici un Projet Directionnel. Ce facteur directionnel est l un des éléments de motivation des électeurs dans leurs choix électoraux