Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min