Análise comparativa na influência da técnica de moldagem funcional em arcos parcialmente edêntulos sobre os pontos de contato oclusais, a integridade da fibromucosa e a extensão da base da prótese

There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension

Uma Análise Comparativa entre Sistemas de Combinação de Classificadores com Distribuição Vertical dos Dados

In systems that combine the outputs of classification methods (combination systems), such as ensembles and multi-agent systems, one of the main constraints is that the base components (classifiers or agents) should be diverse among themselves. In other words, there is clearly no accuracy gain in a system that is composed of a set of identical base components. One way of increasing diversity is through the use of feature selection or data distribution methods in combination systems. In this work, an investigation of the impact of using data distribution methods among the components of combination systems will be performed. In this investigation, different methods of data distribution will be used and an analysis of the combination systems, using several different configurations, will be performed. As a result of this analysis, it is aimed to detect which combination systems are more suitable to use feature distribution among the components

Análise comparativa da tendência na mortalidade infantil em áreas cobertas e não cobertas pela estratégia saúde da família no município de Garanhuns entre 2003 e 2012

A mortalidade infantil é tida como um indicador sensível para descrever as condições de vida e de saúde de uma população, sendo, portanto, interpretada como a estimativa do risco de um nascido vivo morrer antes de completar o primeiro ano de vida. Esse indicador é considerado elevado quando atinge patamares superiores a 50/1.000 nascidos vivos, médios quando se encontra entre 20 e 49/1.000 e mais baixos quando está até 20/1.000. No Brasil, a Mortalidade Infantil tem evidenciado variações ao longo dos anos, e nas duas últimas décadas esse indicador tem sofrido um acentuado decréscimo, provavelmente devido à melhoria no acesso aos serviços de saúde, ao saneamento básico, redução da taxa de fecundidade, melhoria das condições de vida e implementação de tecnologias na atenção à saúde. O objetivo principal do estudo foi avaliar a tendência na mortalidade infantil no município de Garanhuns no período de 2003 a 2012, segundo áreas cobertas e não cobertas pela estratégia saúde da família. Foi realizado um estudo de série temporal, e para isso foram coletados os dados referentes aos nascidos vivos e óbitos de menores de 01 (um) ano através do Sistema de Informações de Atenção Básica – SIAB, nas áreas cobertas e não cobertas pela estratégia, a fim de estabelecer relação de possível causalidade entre a intervenção e o indicador. Os resultados foram apresentados em gráficos, com a curva da Mortalidade Infantil no município de Garanhuns entre os anos de 2003 e 2012 segmentado através das áreas cobertas e não cobertas pela estratégia saúde da família ao longo do mesmo período. Após a análise dos resultados, observou-se uma tendência de queda no coeficiente de mortalidade infantil tanto nas áreas cobertas pela estratégia saúde da família quanto nas áreas cobertas pelo PACS, e que não foi possível estabelecer isoladamente uma maior redução da mortalidade infantil em áreas cobertas pela estratégia. No entanto, os resultados das ações desenvolvidas pela estratégia saúde da família são consistentes e plausíveis de causar impacto no declínio da mortalidade infantil, sobretudo as ações voltadas para a saúde da mulher e da criança

Análise comparativa da imunoexpressão de GLUT-1, GLUT-3 e M-CSF em lesão periférica e central de células gigantes

The peripheral giant cell lesion ( PG CL ) and the central giant cell lesion ( CGC L) are lesions histologically similar affecting the head and neck region . The study aimed to analyze the immunohistochemical expression of markers GLUT - 1 , GLUT - 3 and M - CSF in a series of cases of PGCL and CGCL , in trying to understand the different biological behavior of these pathologies . The sample consisted of 20 tissue specimens of PGCL 20 central lesion of not aggressive giant cell ( CLNAGC) and 20 central lesi on of aggressive giant cell ( CLAGC), coming from the Pathology Unit of Oral Pathology of the Department of Dentistry of UFRN . W as performed the s emi - quantitative and qualitative analysis of immunohistochemical expression of the markers in giant cells and m ononuclear cells . In relation to the GLUT - 1, it was found a statistically significant difference (p < 0.05) in the number of mononuclear cells immunomarked between the PGCL and the CLNAGC and between the PGCL and CLAGC . Regarding the intensity of staining w as also observed a statistically significant difference both at the mononuclear cells as in giant cells between PL and CLNAGC and between PGCL and CLAGC , at the giant cells there was also a statistically significant difference between the CLNAGC and CLAGC . In relation to GLUT - 3 , was found a statistically significant difference between PGCL and CLAGC and between CLAGC and CLNAGC in amount of mononuclear cells immunomarked . Regarding the intensity of labeling for such protein was found a statistically signifi cant difference at the giant cells between PL and CLAGC . To the M - CSF was observed only a statistically significant difference in the intensity of labeling at the mononuclear cells between PGCL and CLNAGC and between PGCL and CLAGC . Based on these results, we can conclude the participation of GLUT - 1, GLUT - 3 and M - CSF in the pathogenesis of the lesions studied. The bigger immunostaining of these proteins in mononuclear cells show that these cells perform a higher metabolic activity and osteoclastogenic, espe cially in CLAGC . It was found that the mononuclear cells were more related to the pathogenesis of the studied lesions than properly the giant s cell s.

Análise comparativa da imunoexpressão do IMP-3 e Ki-67 em queilites actínicas e carcinoma epidermóide de lábio inferior

Epithelial changes observed in actinic cheilitis (AC) and squamous cell carcinoma of the lower lip (LLSCC) are mainly caused by chronic exposure to ultraviolet rays (UV) and are studied using different immunohistochemical markers trying to evaluate the process of carcinogenesis. The objective of this study was to comparatively evaluate the expression of Ki-67 proteins and IMP-3 in AC and LLSCC to contribute with additional information on carcinogenesis in lower lip. A total of 33 cases of AC and 33 cases of LLSCC were studied, analyzed the clinical and pathological features and immunostaining of Ki-67 and IMP-3. Immunohistochemical analysis of Ki-67 was made through the determination of the proliferation index (PI) and subsequent classification of the cases according to the scores: 0 (0% positive cells) +1 (≤30%) + 2 (> 30% and ≤60%) and +3 (> 60%). For statistical tests cases were classified as unmarked (score 0), low expression (score +1) and high expression (scores +2 and +3). For the expression of IMP-3, the percentage of immunostained epithelial cells was established, and assigned scores: 0 (corresponding to 0%), +1 (up to 30% of positive cells); +2 (From 30% to 60% of immunostained cells) and +3 (over 60% of positive cells). Statistical tests chi-square test, Mann-Whitney and Wilcoxon were used. The significance level was 5%. Most AC chaos was male (78.8%) with mean age of 50 years and cases of LLSCC also were male (69.89%) with an average of 62 years. The Ki-67 was expressed in all cases of AC and in cases of LLSCC, predominantly in the two injuries the score 2, corresponding to 81.8% of cases in ACs and 54.5% in the CELI. The expression of IMP-3 in ACs occurred in 72.7% of cases, predominantly in 36.3% of LLSCC cases score 1. Already in the IMP-3 was expressed in 60.6% of cases, especially in 27.3% of the score of the cases 3. These results allow us to conclude that the expression of IMP3 and proliferative activity are early events in carcinogenesis independently lower lip state of change.

Avaliação comparativa da eficácia dos meios de diagnóstico das vulvovaginites: implantação de tecnologia no ensino prático da ginecologia

Inaccurate diagnosis of vulvovaginitis generates inadequate treatments that cause damages women's health. Objective: evaluate the effectiveness of methods when diagnosing vulvovaginitis. Method: a cross-sectional study was performed with 200 women who complained about vaginal discharge. Vaginal smear was collected for microbiological tests, considering the gram stain method as gold standard. The efficacy of the available methods for diagnosis of vaginal discharge was assessed (sensitivity, specificity, positive predictive value and negative predictive value). Data were inserted to Graphpad Prism 6, for statistical analysis. Results: the following results were obtained: wet mount for vaginal candidiasis: sensitivity = 31%; specificity = 97%; positive predictive value (PPV) = 54%; negative predictive value (NPV) =93%; accuracy = 91%. Wet mount for bacterial vaginosis: sensitivity = 80%; specificity =95%; positive predictive value (PPV) = 80%; negative predictive value (NPV) = 95%; accuracy = 92%. Syndromic approach for bacterial vaginosis: sensitivity = 95%; specificity=43%; positive predictive value (PPV) =30%; negative predictive value (NPV) = 97%; accuracy = 54%. Syndromic approach for vaginal candidiasis: sensitivity = 75%; specificity =91%; positive predictive value (PPV) = 26%; negative predictive value (NPV) = 98%; accuracy = 90%. Pap smear for vaginal candidiasis: sensitivity = 68%, specificity = 98%; positive predictive value (PPV) = 86%; negative predictive value (NPV) =96%; accuracy = 96%. Pap smear for bacterial vaginosis: sensitivity = 75%; specificity = 100%; positive predictive value (PPV) = 100%; negative predictive value (NPV) =94%; accuracy = 95%. There was only one case of vaginal trichomoniasis reported – diagnosed by oncological cytology and wet mount – confirmed by Gram. The syndromic approach diagnosed it as bacterial vaginosis. From the data generated and with support on world literature, the Maternidade Escola Januário Cicco’s vulvovaginitis protocol was constructed. Conclusion: Pap smear and wet mount showed respectively low and very low sensitivity for vaginal candidiasis. Syndromic approach presented very low specificity and accuracy for bacterial vaginosis, which implies a large number of patients who are diagnosed or treated incorrectly.

Performance comparativa entre R437A e R134A paradrop-in em um condicionador de ar automotivo

The reduction in energy consumption is the main requirement to be satisfied in refrigeration and air conditioning by mechanical vapor compression system. In automotive system isn´t different. Thermal analyses in these systems are crucial for a better performance in automotive air conditioner. This work aims to evaluate the conditions of use of R134A refrigerant (used in vehicles) and compare with R437A (alternative refrigerant), varying the speed of the electric fan in the evaporator. All tests were performed in automotive air conditioning unit ATR600, simulating the thermal conditions of the system. The equipment is instrumented for data acquisition temperature, condensation and evaporation pressures and electrical power consumed to determine the coefficient of performance of the cycle. The system was tested under rotations of 800, 1600 and 2400 rpm with constant load of R- 134a. It occurred with the same conditions with R437A. Both recommended by the manufacturer. The results show that the best system performance occurs in the rotation of 800 RPM for both refrigerants.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

A gestao do conhecimento e a inovaçao tecnologica como insumo basico para a vantagem competitiva das empresas

REGIS, Josiana Florencio Vieira ; CAMPOS, Ana Celia Cavalcanti Fernandes. A gestão do conhecimento e a inovaçao tecnológica como insumo básico para a vantagem competitiva das empresas. In: CONGRESSO BRASILEIRO DE GESTÃO DO CONHECIMENTO, 8., 2009, Sao Paulo. Anais eletrônicos... Sao Paulo: SBGC, 2009. Trabalho oral.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

Metagenômica comparativa de solo de regiões de mata atlântica e caatinga do estado do Rio Grande do Norte - Brasil

The microorganisms play very important roles in maintaining ecosystems, which explains the enormous interest in understanding the relationship between these organisms as well as between them and the environment. It is estimated that the total number of prokaryotic cells on Earth is between 4 and 6 x 1030, constituting an enormous biological and genetic pool to be explored. Although currently only 1% of all this wealth can be cultivated by standard laboratory techniques, metagenomic tools allow access to the genomic potential of environmental samples in a independent culture manner, and in combination with third generation sequencing technologies, the samples coverage become even greater. Soils, in particular, are the major reservoirs of this diversity, and many important environments around us, as the Brazilian biomes Caatinga and Atlantic Forest, are poorly studied. Thus, the genetic material from environmental soil samples of Caatinga and Atlantic Forest biomes were extracted by direct techniques, pyrosequenced, and the sequences generated were analyzed by bioinformatics programs (MEGAN MG-RAST and WEBCarma). Taxonomic comparative profiles of the samples showed that the phyla Proteobacteria, Actinobacteria, Acidobacteria and Planctomycetes were the most representative. In addition, fungi of the phylum Ascomycota were identified predominantly in the soil sample from the Atlantic Forest. Metabolic profiles showed that despite the existence of environmental differences, sequences from both samples were similarly placed in the various functional subsystems, indicating no specific habitat functions. This work, a pioneer in taxonomic and metabolic comparative analysis of soil samples from Brazilian biomes, contributes to the knowledge of these complex environmental systems, so far little explored