Proposta de localização de uma unidade de tratamento de óleo e gordura residual de fritura na cidade do Natal/RN para produção de biodiesel

This work addresses biodiesel by transesterification from the use of waste frying oil as a possible technological alternative for both reducing greenhouse gas emissions and by presenting themselves as an environmental call to designate a rational use of oil when no longer played in the environment to become renewable energy. It has proposed location of a residual oil and fat treatment plant to produce biodiesel, using models of Location and Routing for the improvement of routes. To achieve the goal, questionnaires were administered in establishments that use oil or vegetable fat in their productive activities in order to quantify the residue, to analyze actions and environmental perception of people who work directly with the residue on the destination you are being given to oil and fat used. It has indicated using of two single setup location, the method of Center of Gravity and the model of Ardalan, a geographical point that minimizes the costs of transporting waste to the treatment plant. Actions have been proposed for the improvement of collection routes this residue using the Routing Method of Scanning, as an illustration. The results demonstrated the lack of knowledge of the people who deal directly with large amounts of waste, on the environmental impacts caused by their incorrect disposal. The models used were uniform since point out to neighborhoods in similar regions. The neighborhoods of Lagoa Nova / Morro Branco (Ardalan) and Nova Descoberta (Center of Gravity) as ideal for the installation of treatment plant. However, it is suggested to be tested other models that take into account new variables than those used (supply of waste and the distance between points). The routing through the method of scanning has shown that it is possible, in a simple way to optimize routes in order to reduce distances and therefore the logistics costs in the collection of such waste. Introducing a route as a test to gather the twenty largest oil suppliers used in sample frying, using as a main factor time 8 hour of working shift every day

A pegada de carbono como um dos indicadores de sustentabilidade para medição da responsabilidade socioambiental empresarial: um estudo de caso na unidade sede da Petrobras em Natal-RN

As a contemporary tendency, it is been evidenced that the environmental changes theme, already admitted as a concernment to international economical and political reality, is also gaining repercussion on industrial and business sector. Firms are implementing actions on trial to minimize their own greenhouse gases (GHG) emissions impacts. However, the great majority of those actions of Corporative Social-Environmental Responsibility (CSR) are referred only to direct emissions of the main production systems. Direct emissions are those derived of an isolate process, without considering the upstream and downstream processes emissions, which respond for the majority of emissions originated because of respective firm‟s production system existence. Because the greenhouse effect occurs globally and the GHG emissions contribute to the environmental changes independently of their origin, it must be taken into account the whole productive life cycle of products and systems, since the energy invested on resources extraction and necessary materials to the final disposal. To do so, it must be investigated all relevant steps of a product/production system life cycle, tracking all activities which emit greenhouse gases, directly or indirectly. This amount of emissions consists in the firm‟s Carbon Footprint. This research purpose is to defend the Carbon Footprint relevance and its adoption viability to be used as an Environmental Indicator on measurement/assessment of CSR. It has been realized a study case on Petrobras‟s seat unity at Natal-Brazil, assessing part of its Carbon Footprint. It has been used the software GEMIS 4.6 to do the emissions quantifying. The items measured were the direct emissions of the own unity vehicles and indirect emissions of offset paper (A4), energy and disposable plastic cups consumed. To 2009, these emissions were 3.811,94 tCO2eq. We may conclude that Carbon Footprint quantification is indispensable to the knowledge of real emissions caused by a productive process existence, must serving as basis to CSR decisions about the environmental changes reversion challenge

Balanced scorecard como ferramenta de gestão aplicada a unidade hospitalar privada

In this study the objective is to implant Balanced Scorecard administration for the development of a Strategic Map, for the support of the electric outlet of decisions in the administration of operations of an unit of attendance doctor-hospitalar. The present work presents a case study developed at a private hospital in the State of Rio Grande do Norte. The collection of data was developed after the analysis of the revision of the literature, and he/she had as critical judgement of evaluation used by the following Unit. The work is concluded in the proposition of a strategic map that elevates the return on investment (financial perspective), in the item profitability and growth. In the search of the customer's satisfaction (customer's perspective), that is nothing else than it already exists inside of the Unit in study, just needing to be organized and aligned with the executive picture and the other collaborators. The requirements competitiveness, information, innovation and technology (perspective of the internal processes), they were indispensable to eliminate the re-work, waste and to improve the automation. It is finally, the investment and development of innovation mechanisms, they enlarge important competitive advantage in the processes for creation of value, through the ability, attitude and knowledge (perspective of the learning and growth). As one of the results of this study a strategic map was developed, looked for in Balanced Scorecard, for support in the electric outlet of decisions of the administration of operations of an Unit Doctor- Healthcare

Análise de desempenho de sistemas de comunicação sem-fio para monitoramento de unidade de produção de poços petrolíferos terrestres

The greater part of monitoring onshore Oil and Gas environment currently are based on wireless solutions. However, these solutions have a technological configuration that are out-of-date, mainly because analog radios and inefficient communication topologies are used. On the other hand, solutions based in digital radios can provide more efficient solutions related to energy consumption, security and fault tolerance. Thus, this paper evaluated if the Wireless Sensor Network, communication technology based on digital radios, are adequate to monitoring Oil and Gas onshore wells. Percent of packets transmitted with successful, energy consumption, communication delay and routing techniques applied to a mesh topology will be used as metrics to validate the proposal in the different routing techniques through network simulation tool NS-2

Desenvolvimento de um software de comunicação sem fio aplicado à instrumentação de unidade de elevação de petróleo tipo Plunger Lift

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system

Um modelo de unidade de medida inercial utilizando três acelerômetros triaxiais

No espaço tridimensional, um corpo rígido qualquer pode efetuar translações e ou rotações em relação a cada um de seus eixos. Identificar com precisão o deslocamento realizado por um corpo é fundamental para alguns tipos de sistemas em engenharia. Em sistemas de navegação inercial tradicionais, utilizam-se acelerômetros para reconhecer a aceleração linear e giroscópios para reconhecer a velocidade angular registrada durante o deslocamento. O giroscópio, entretanto, é um dispositivo de custo mais elevado e com alto consumo de energia quando comparado a um acelerômetro. Essa desvantagem deu origem a pesquisas a respeito de sistemas e unidades de medidas inerciais que não utilizam giroscópios. A ideia de utilizar apenas acelerômetros para calcular o movimento linear e angular surgiu no início da década de 60 e vem se desenvolvendo através de modelos que variam no número de sensores, na maneira como estes são organizados e no modelo matemático que é utilizado para derivar o movimento do corpo. Esse trabalho propõe um esquema de configuração para construção de uma unidade de medida inercial que utiliza três acelerômetros triaxiais. Para identificar o deslocamento de um corpo rígido a partir deste esquema, foi utilizado um modelo matemático que utiliza apenas os nove sinais de aceleração extraídos dos três sensores. A proposta sugere que os sensores sejam montados e distribuídos em formato de L . Essa disposição permite a utilização de um único plano do sistema de coordenadas, facilitando assim a instalação e configuração destes dispositivos e possibilitando a implantação dos sensores em uma única placa de circuito integrado. Os resultados encontrados a partir das simulações iniciais demonstram a viabilidade da utilização do esquema de configuração proposto

Protótipo de uma unidade com tri-geração de energia para utilizações remotas: aplicação de módulo secondutivo gerador termoelétrico

The generation for termoeletricity is characterized as a solid process of conversion of thermal energy (heat) in electric without the necessity of mobile parts. Although the conversion process is of low efficiency the system presents high degree of trustworthiness and low requisite of maintenance and durability. Its principle is based on the studies of termogeneration carried through by Thomas Seebeck in 1800. The frank development of the technologies of solid state for termoeletricity generation, the necessity of the best exploitation of the energy, also with incentive the cogeneration processes, the reduction of the ambient impact allies to the development of modules semiconductors of high efficiency, converge to the use of the thermoeletric generation through components of solid state in remote applications. The work presents the development, construction and performance evaluation of an prototype, in pilot scale, for energy tri-generation aiming at application in remote areas. The unit is composed of a gas lamp as primary source of energy, a module commercial semiconductor for thermoelectric generation and a shirt for production of the luminosity. The project of the device made compatible a headstock for adaptation in the gas lamp, a hot source for adaptation of the module, an exchanger of to be used heat as cold source and to compose first stage of cogeneration, an exchanger of tubular heat to compose second stage of cogeneration, the elaboration of a converter dc-dc type push pull, adequacy of a system of acquisition of temperature. It was become fullfilled assembly of the prototype in group of benches for tests and assay in the full load condition in order to evaluate its efficiency, had been carried through energy balance of the unit. The prototype presented an electric efficiency of 0,73%, thermal of 56,55%, illumination of 1,35% and global of 58,62%. The developed prototype, as the adopted methodology of assay had also taken care of to the considered objectives, making possible the attainment of conclusive results concerning to the experiment. Optimization in the system of setting of the semicondutor module, improvement in the thermal insulation and design of the prototype and system of protection to the user are suggestions to become it a commercial product

Desenvolvimento de uma unidade laboratorial para quantificação de BTX como poluentes atmosféricos, usando microextração em fase sólida

This dissertation aims the development of an experimental device to determine quantitatively the content of benzene, toluene and xylenes (BTX) in the atmosphere. BTX are extremely volatile solvents, and therefore play an important role in atmospheric chemistry, being precursors in the tropospheric ozone formation. In this work a BTX new standard gas was produced in nitrogen for stagnant systems. The aim of this dissertation is to develop a new method, simple and cheaper, to quantify and monitor BTX in air using solid phase microextraction/ gas chromatography/mass spectrometry (SPME/CG/MS). The features of the calibration method proposed are presented in this dissertation. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fiber exposed for 10 min standard gas mixtures. It is observed that the main parameters that affect the extraction process are sampling time and concentration. The results of the BTX multicomponent system studied have shown a linear and a nonlinear range. In the non-linear range, it is remarkable the effect of competition by selective adsorption with the following affinity order p-xylene > toluene > benzene. This behavior represents a limitation of the method, however being in accordance with the literature. Furthermore, this behavior does not prevent the application of the technique out of the non-linear region to quantify the BTX contents in the atmosphere.

A fotossíntese vegetal no 3º ano do Ensino médio: concepções alternativas, erros conceituais e uma proposta de unidade didática baseada no Desenvolvimento Sustentável.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Contribuições de uma unidade de ensino potencialmente significativa UEPS para o ensino de ecologia em escola pública da educação básica

The research aims to evaluate the contributions of a teaching unit to enhance the learning contents ecological green areas in elementary school. The work was conducted with elementary students in a public school in Natal-RN. We sought to identify the students´ previous knowledge about the contents of ecology, develop and implement a Potentially Meaningful Teaching Units PMTU; assess learning of ecological concepts in Teaching Unit Potentially Significant; assess the contribution of interpretative trail as strategy teaching to learning content ecology. The survey of students´ previous knowledge through the pre-test was essential to identify the appropriate subsumers and partially correct, since they served as "anchor" for further expansion of scientific concepts contained in this research. The green areas of the school as an educational, contributed the motivational aspect, as students were protagonists throughout the entire process of teaching and learning. The method of stimulated memory was effective to evidence learning ecological concepts in interpretive trails. The use of diverse activities organized on a PMTU promoted intellectual autonomy of the students and facilitated the acquisition of new meanings through progressive differentiation, and integrative reconciliation consolidation of ecological content and concepts related to biotic and abiotic factors on the basis of the central ideas thematic Life and Environment. The development of procedural skills to capture and share meanings, observe, collect and record data, hypotheses, ability to explain, to apply knowledge to solve problem situations, argue, identify, compare, differentiate and relate concepts, negotiate meanings, reflecting Critically, systematize data was evidenced. Collaborative activities promoted the incorporation of attitudinal contents as developing respect for differences, learn to work in teams to plan, develop and implement actions together for citizenship and environmental responsibility. The application of the Potentially Meaningful Teaching Units PMTU showed evidence of Critical meaningful learning ecological concepts covered in elementary school.

Trocando Olhares: o desejo, o amor, a angústia e a dor na poesia de Florbela Espanca

In this work, Florbela Espanca poetry is analyzed. The objective is to prove that the loving thematic in her poetry tissues a connection among wish, love and sorrow. The psychoanalitic boarding is the basis to elucidate this connection,which begans with the sight, since mythology, passing by the portuguese literature begining periods and repeating itself in Florbela contemporanian poets. If Florbela poetry corroborates the portuguese literature tradiction, otherwise, it exposes the subject human being face, being a wishful creature

Abordagem cognitiva da construção deverbal x-dor: contribuições para o ensino do português

This work analyzes deverbal nominalizations with the sufix dor in Brazilian Portuguese, under the perspective of Cognitive Linguistics, more specifically, the Construction Grammar. The aim is to determine the general features of interpretation that characterize this deverbal construction and its use in formal writing. Based on the cognitive assumption that grammatical structure is motivated, explained, and determined by the structure of cognitive patterns, created from our experience in the world, and by the communicative function of language, the dor deverbal is treated as a polysemic grammatical construction. In the composition of V+dor, the relation rootsuffix is focused, through a characterization of the syntactic-semantic nature of the verb and the values of the suffix. Among the different values conventionally related to the XDOR construction, the agentive is considered as the prototypical sense. The relation between the other values and the prototype is explained by cognitive abilities and discourse motivations. The deverbal construction X-DOR is also interpreted as a valency noun that, like an action nominal, retains the argument structure of the deriving predicate. It is also intended to demonstrate the textual function of this deverbal construction, as a device of information condensing and anaphoric recovery. The data were taken from Veja magazine and the approach is qualitative (explicative), with quantitative support

Análise da função dos músculos do quadril em portadores de síndrome da dor patelofemural

The Patellofemoral pain syndrome is defined as a fore or retro patellar pain and it has multifactorial etiology, where the bad patellar alignment is the most acceptable hypothesis. However proximal factors to the knee, as the debility of the muscles of the hip, have been demonstrated as a contributing factor to the appearing of that syndrome. Purpose: To evaluate if exists a relation between the hip muscles performance and the development of the SDPF. Methods: Thirty women took part in this study. They were divided in two groups; a control group (fifteen asymptomatic subjects) and an experimental group (fifteen subjects with the diagnosis of SDPF). The muscle performance was evaluated in an isokinetic dynamometer, where it was verified the peak torque (PT), PT to body weight, PT time and the agonist/antagonist relation. It was also analyzed the electromyographic activity of the middle gluteus. The data was analyzed by the not paired t test at a significance level of 5%. Results:. Didn t have significant difference to the PT of the abductor muscles (p = 0,46) and lateral rotators of the hip (p = 0,17) between groups. Also didn t have significant difference to the PT values by the body weight, to these muscle groups either (p = 0,10 e p = 0,11, respectively). Didn t have significant difference between the amplitude of the signal (p = 0,05) and the onset of medium gluteus (p = 0,25) between the groups. Conclusion: In the experimental conditions realized, the study didn t demonstrate a relation between performance the hip muscles behavior and the development of the SDPF

Efeito imediato da estimulação elétrica neuromuscular seletiva do músculo VMO em pacientes com síndrome da dor femoropatelar

Patellofemoral pain syndrome (PFPS) is described as anterior or retropatellar pain knee in the absence of other pathologies and is frequently associated with dysfunction of the vastus medialis oblique (VMO). However, several studies have demonstrated the inability to selectively activate this muscle through exercise. To evaluate the effect of Neuromuscular Electrical Stimulation (NMES) selective VMO in women with syndrome. We evaluated thirty-eight women: twenty in the control group (24.15 ± 2.60 years) and eighteen diagnosed with PFPS (25.56 ± 3.55 years). Both groups were evaluated before and after a protocol of electro stimulation. To measure for comparing groups before and after treatment, we assessed the extensor torque concentric and eccentric knee through an isokinetic dynamometer, the intensity (Root Mean Square - RMS) and the onset of activation (onset) of VMO compared to the vastus lateralis (VL) in two types of exercise: open and closed kinetic chain. . Statistical analysis was performed using SPSS 15.0, with a significance level of 5%. Results: Our data showed an increase in the intensity of activation (RMS) of the VMO muscle after NMES in both study groups. During concentric contraction the RMS of the VMO before the NMES was 105.69 ± 32.26 μV and after a single intervention was 122.10 ± 39.62 μV (p = 0.048) for the control group. In the group with PPS, we found a similar behavior, with RMS of the VMO before NMES of 96.25 ± 18.83 μV and 139.80 ± 65.88 μV after the intervention (p = 0.0001). However, there was no evidence in the RMS value of VL muscle. The onset was calculated by subtracting the onset of VL by the onset of VMO. For the group with PFPS, the onset before the intervention was -0.007 ± 0.14 ms, indicating a delay of the VMO relative to VL, and after NMES was 0.074 ± 0.09 ms (p = 0.016), showing an activation previous VMO to VL. The same occurred for the control group. We also observed that NMES increased knee extensor power during the concentric contraction in both groups. Before the intervention the mean power was 28.97 ± 9.01 W for the PPS group and after NMES was 34.38 ± 7.61 W (p = 0.0001). Conclusion: We observed an increase in electromyographic activity of the VMO and also an anticipatory effect of this muscle

Análise da relação entre alterações do padrão do sono e dor lombo-pélvica em mulheres no segundo trimestre gestacional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior