Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Avaliação do efeito da adição de resíduo de borracha de pneu e brita calcária na formulação de compósitos cimentíceos

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Estudo de inibidores de corrosão em concreto armado, visando a melhoria na sua durabilidade

This thesis has as objective presents a methodology to evaluate the behavior of the corrosion inhibitors sodium nitrite, sodium dichromate and sodium molybdate, as well as your mixture, the corrosion process for the built-in steel in the reinforced concrete, through different techniques electrochemical, as well as the mechanical properties of that concrete non conventional. The addition of the inhibitors was studied in the concrete in the proportions from 0.5 to 3.5 % regarding the cement mass, isolated or in the mixture, with concrete mixture proportions of 1.0:1.5:2.5 (cement, fine aggregate and coarse aggregate), superplasticizers 2.0 % and 0.40 water/cement ratio. In the modified concrete resistance rehearsals they were accomplished to the compression, consistence and the absorption of water, while to analyze the built-in steel in the concrete the rehearsals of polarization curves they were made. They were also execute, rehearsals of corrosion potential and polarization resistance with intention of diagnose the beginning of the corrosion of the armors inserted in body-of-proof submitted to an accelerated exhibition in immersion cycle and drying to the air. It was concluded, that among the studied inhibitors sodium nitrite , in the proportion of 2.0 % in relation to the mass of the cement, presented the best capacity of protection of the steel through all the studied techniques and that the methodology and the monitoring techniques used in this work, they were shown appropriate to evaluate the behavior and the efficiency of the inhibitors

Diagnóstico da possível influência da atividade petrolífera em sedimentos de fundo da Bacia Piranhas-Açu, região Baixo Açu/RN

It is located in an area of increasing oil exploration, the region of the Lower Açu is at the mercy of a possible pollution generated by this economic activity, which includes various chemical substances harmful to health, such as metals. This thesis aims to, diagnose the areas of River Piranhas-Açu, a region of the Lower Açu, which are polluted by traces factors and more. In this study, it was determined the concentration of the chemica elements Al, CD, Cr, Cu, Fe, Mn, Ni, P, Pb, V and Zn, through the technique of ICP-OES analysis and the size of sediments and their contents organic matter. Were mapped by GPS, 12 points from collections. The interpretations of the results, together associating that allowed pollution to a possible contamination by oil activity. The results showed tha some regions have low concentrations of cadmium, lead, copper, manganese and zinc unable to promote damage to human health. However, there are places where the concentrations of certain metals chromium, iron and zinc are moderately polluted compared to the results with the reference values of literature and others that are highly polluted by iron. However, due to a greater number of wells in production in those locations, those higher concentrations, it can be suggested a possible influence of oi production in some areas with concentrations of chromium and lead are higher than the rest of the points of monitoring. Moreover, it is observed that the highest levels of metals found in sediment of finer texture and more organic matter content

Atenuação de ruídos coerentes utilizando decomposição em modos empíricos

The seismic processing technique has the main objective to provide adequate picture of geological structures from subsurface of sedimentary basins. Among the key steps of this process is the enhancement of seismic reflections by filtering unwanted signals, called seismic noise, the improvement of signals of interest and the application of imaging procedures. The seismic noise may appear random or coherent. This dissertation will present a technique to attenuate coherent noise, such as ground roll and multiple reflections, based on Empirical Mode Decomposition method. This method will be applied to decompose the seismic trace into Intrinsic Mode Functions. These functions have the properties of being symmetric, with local mean equals zero and the same number of zero-crossing and extremes. The developed technique was tested on synthetic and real data, and the results were considered encouraging

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Morte como desafio afetivo para o profissional da saúde: ansiedade e sentimentos de quem lida com o paciente terminal com câncer

It is a Cross-sectional and multi-disciplinary study whose population selection was made by department of human resources (composed by a Manager, an Oncologist and a Psychologist) from the hospital where this research was realized. They also collaborated with important information about the work of that professionals in the hospital. We also counted on a Statistic who made study design calculating the sample and analyzing data. This research issued Evaluating health professionals anxiety levels who care for cancer terminally ill and their feelings about that work as well as identifying the factors which have influence on it. 100 health professionals from the Hospital which is a reference on cancer caring in Brazil situated in the city of Natal, state of Rio Grande do Norte, participated of this research. There was a sample loss of 21%. Data were collected through a questionnaire and State-Trait Anxiety Inventory (STAI). Results showed that 15% of the professionals have low State Anxiety levels, 70% Medium State Anxiety levels and 15% high State anxiety levels. The Number of Patients and Working in another Institution have interfered in the anxiety levels. Doctors and Nursing Assistants and Technicians have got the highest high State Anxiety percentage (25%). 73% of them declare to feel some sort of different behavior and/or feelings in caring for terminally ill. The most remarkable professionals feelings were Suffering and Sadness, and Terminally ill Children was the most difficult age group to care for. We conclude that work overload and having more than one job can interfere in professional stress levels and anxiety. Dealing with terminally ill, specially children one, can cause on the professionals psychological suffering. It s recommended the development of supporting and training strategies to reduce and/or to prevent Stress and Anxiety high levels

Diagnóstico molecular da talassemia ALFA+ (DELEÇÃO -3.7) em indivíduos com microcitose e/ou hipocromia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Ansiedade em indivíduos bruxômanos e suas principais implicações na vida social

Neste trabalho procuramos estudar o fenômeno do bruxismo, definido como o ato de apertar e/ou ranger os dentes, hábito prejudicial à região orofacial relacionado a varáveis psicossociais. O bruxismo é frequentemente associado aos aspectos emocionais, entre os mais ressaltados, a ansiedade e o estresse, podendo implicar em alterações das estruturas orofaciais, modificações funcionais e inclusive com repercussões sociais. Deste modo, torna-se relevante evidenciar que a pesquisa foi desenvolvida, visando o contexto multidisciplinar, abrangendo a Fonoaudiologia, Odontologia e Psicologia. Objetivo: verificar associação entre bruxismo, ansiedade e as principais queixas referentes à função mastigatória. Método: participaram oitenta voluntários, divididos entre grupo com bruxismo (N=40) e sem bruxismo (N=40), do sexo masculino e feminino. O diagnóstico do bruxismo foi realizado através do exame clínico. Para avaliar os níveis de ansiedade empregou-se o Inventário de Ansiedade Traço e Estado e para os aspectos psicossociais um questionário com questões estruturadas referentes às atividades diárias, focando a função mastigatória (para o grupo com bruxismo). Resultados:: Os resultados permitem evidenciar diferenças significativas entre os grupos analisados, a média e desvio padrão de ansiedade estado no grupo com bruxismo, 42,7±9,6 e sem bruxismo 38,6±8,2 (p ≤0,04) e de ansiedade traço respectivamente 44,5±11,0 e controle 40,7±9,5 (p ≤0,11). O relato dos participantes com bruxismo evidenciou como principais queixas durante a mastigação, dor na face ao mastigar, cansaço muscular na face, cefaleia ao mastigar e presença de ruídos articulares. Conclusões: Evidenciamos uma associação dos fatores emocionais como a ansiedade e o bruxismo, e como resultante os pacientes apontam que a função mastigatória encontra-se depreciada

Abordagem dos aspectos psicológicos da mulher infértil :um estudo quali-quantitativo

Purpose: assess the frequency of stress and anxiety levels in infertile women, correlate these aspects with risk factors and qualitatively analyze feelings resultant from the inability to conceive, in order to obtain data for specific psychological guidance. Methods: the case-control study included a total of 302 women, 152 being infertile (case group: 30.3 ± 5.4 years), and 150 non-fertile (control group: 25.7 ± 7.9 years). The quantitative approach involved the application of Lipp s Stress Symptoms Inventory (LSSI) and State-Trait Anxiety Inventory (STAI), whereas the qualitative approach consisted of a semi-structured interview. Response variables considered were: stress frequency and anxiety scores (State and Trait). Statistical analysis compared frequencies and medians between groups, by means of qui-squared and Mann-Whitney tests, respectively, and constructed logistical regression models to test associations between response variables and risk factors considered. Qualitative data were analyzed descriptively and categorized in order to perform correspondence analysis. The level of significance was 5%. Results: in the study sample, stress frequency was higher in the case group than in the control(61.8 and 36.0%, respectively), however, significant differences were not observed between groups in relation to stress phases and predominant symptomology type. With respect to anxiety, there were no significant differences between case and control groups as to median state scores [39.5 (35.0 46.0) and 41.0 (35.7 47.0 ); respectively) and anxiety trait scores [44.0 (34.0 51.0) and 42.0 (36.0 49.2); respectively). Risk factors significantly associated with greater risk for high anxiety scores in the case group were: primary infertility, unawareness of the causal factor, diagnostic phase investigation, religion, lack of children from other marriages and the fact that the woman was previously married. The qualitative approach demonstrated that infertility provokes emotional responses, such as sadness, anxiety, anger, fear and guilt. Conclusions: it can be concluded that infertile women are more vulnerable to stress; however, they are capable of adapting to stressful events without serious physical or psychological compromising

Diagnóstico molecular da talassemia ALFA em indivíduos com microcitose e/ou hipocromia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

O erotismo mítico da ninfeta

This dissertation establishes a viewpoint in the Social Cience Field of the Nymphs image in the romanesque construction of the twentieth century based in modern archaeology. Our literary corpus is constitututed by the book of the russian author callled Wladimir Nabokov entlited Lolita and the book Presença de Anita, from a brazilian author called Mario Donato. Both works had a singular repercussion involving an erotic conception wich was faced as pornographic and baffling. We appeal to Georges Bataille‟s and Foucault‟s discussion in order to observe it through an erotic viewpoint from an inner experience not submitted to normalizations. Such experiences provoke a feeling of something unknown and it reflects wild singularities proposed by Foucault and related with many misunderstanding things presented in institutions and cultures. Furthemore Bataille‟s conception about erotism will give us conditions to analyze nymphs‟ bodies in order to see themselves from their main characteristics, such as seduction and tempting and maligning forces. We still aim to focus the paradigm of mankind and nature in the direction presented by Edgar Morin. He analyzes some feelings that nymphs provoke and their relation between men and death. In adittion, we present in this issue some questions between culture and biology, focusing on the initial period of larva (wich means the beggining), bringing up what is ready to be born, a mythical and significant body shown in the media. Lolita in the cinema and A Presença de Anita in the TV was disturbing in society and it projected the possibility of a syntaxes of desire. It can has a symbolic purpose or it can be a kind of social and cultural phenomenon, wich is an object of representation. Our purpose is to immersion/emerge in the Nimphs‟s body with adventure and its risks at the same time in wich we are crossing frontiers