Proposta de um sistema de segurança eletrônica predial

This work presents a suggestion of a security system of land automation having as objective main the creation of a system capable from easy method, supervise the installations of a building with the goal to preserver security personal and patrimonial necessities, aim at portability low cost and use easiness. Was designed an alarms central and access controller that has digital and analogical inputs for sensors and outputs for buzzer, telephonic dialing and electronic lock. The system is supervised by software that makes solicitations of information to the alarms central through the one computer's serial port (RS-232). The supervisory software was developed in platform LabVIEW with displays the received data on a graphical interface informing the sensors' current states distributed in the building and system events as alarns occurrences. This system also can be viewed through the Internet for people registered by the land security's system administrator

Proposta de integração das redes de comunicação da COSERN como uma solução de contigêncvia em caso de falhas nos enlaces do backbone de automação

T'his dissertation proposes alternative models to allow the interconnectioin of the data communication networks of COSERN Companhia Energética do Rio Grande do Norte. These networks comprise the oorporative data network, based on TCP/IP architecture, and the automation system linking remote electric energy distribution substations to the main Operatin Centre, based on digital radio links and using the IEC 60870-5-101 protoco1s. The envisaged interconnection aims to provide automation data originated from substations with a contingent route to the Operation Center, in moments of failure or maintenance of the digital radio links. Among the presented models, the one chosen for development consists of a computational prototype based on a standard personal computer, working under LINUX operational system and running na application, developesd in C language, wich functions as a Gateway between the protocols of the TCP/IP stack and the IEC 60870-5-101 suite. So, it is described this model analysis, implementation and tests of functionality and performance. During the test phase it was basically verified the delay introduced by the TCP/IP network when transporting automation data, in order to guarantee that it was cionsistent with the time periods present on the automation network. Besides , additional modules are suggested to the prototype, in order to handle other issues such as security and prioriz\ation of the automation system data, whenever they are travesing the TCP/IP network. Finally, a study hás been done aiming to integrate, in more complete way, the two considered networks. It uses IP platform as a solution of convergence to the communication subsystem of na unified network, as the most recente market tendencies for supervisory and other automation systems indicate

Uma proposta de regulador nebuloso para geradores eólicos de indução

This work presents a proposal for a voltage and frequency control system for a wind power induction generator. It has been developed na experimental structure composes basically by a three phase induction machine, a three phase capacitor and a reactive static Power compensator controlled by histeresys. lt has been developed control algorithms using conventional methods (Pl control) and linguistic methods (using concepts of logic and fuzzy control), to compare their performances in the variable speed generator system. The control loop was projected using the ADJDA PCL 818 model board into a Pentium 200 MHz compu ter. The induction generator mathematical model was studied throught Park transformation. It has been realized simulations in the Pspice@ software, to verify the system characteristics in transient and steady-state situations. The real time control program was developed in C language, possibilish verify the algorithm performance in the 2,2kW didatic experimental system

Uma nova proposta de antenas Quasi-Yagi banda larga para comunicação sem fio

ln this work, planar quasi- Y agi antennas are investigated based on the concept of the classic Y agi_Uda antennas. These antennas represent improvements on the topologies of the antennas existing printed because they present characteristics of broad bandwidth, excellent radiation diagrams and simple construction. New configurations are adapted for the driver of the antennas, introducing patches elements into the driver. These new configurations are named Patches Elements Anteonas (PEA). This adaptation is obtained from simulations that are executed usiog the software C8T Microwave 8tudio 5. After doing the optimizations, procedures for construction and measurement ofthe prototypes are executed in order to improve the performance of the antennas in such way that they could be used in wireless communication applications, such as Bluetooth, WLAN' s and Wi-Fi. Next, the quasi- Y agi antennas are studied in order to implement them in arrangements. The arrangements construction is based 00 the best driver configuration of the antenna developed in this work. First, a linear arrangement composed by two elements of quasi¬Yagi antennas is constructed in such way that the radiation characteristics and the mutual coupling effects could be analyzed. After that, a 90° angle arrangement composed by two elements is studied to observe the effect of circular polarization. Experiments are executed in order to evaluate the arrangements performance. The experimental results show that the analysis made in this work is efficient and accurate. The numerical values obtained for the analyzed parameters of each structure developed are compared with the experimental values. 80, it is possible to observe a good concordance between them. Finally, some future works proposals are presented

Proposta de algoritmo para detecção de vazamentos em oleodutos utilizando análise freqüencial de sinais de pressão

Pipeline leak detection is a matter of great interest for companies who transport petroleum and its derivatives, in face of rising exigencies of environmental policies in industrialized and industrializing countries. However, existing technologies are not yet fully consolidated and many studies have been accomplished in order to achieve better levels of sensitivity and reliability for pipeline leak detection in a wide range of flowing conditions. In this sense, this study presents the results obtained from frequency spectrum analysis of pressure signals from pipelines in several flowing conditions like normal flowing, leakages, pump switching, etc. The results show that is possible to distinguish between the frequency spectra of those different flowing conditions, allowing recognition and announce of liquid pipeline leakages from pressure monitoring. Based upon these results, a pipeline leak detection algorithm employing frequency analysis of pressure signals is proposed, along with a methodology for its tuning and calibration. The proposed algorithm and its tuning methodology are evaluated with data obtained from real leakages accomplished in pipelines transferring crude oil and water, in order to evaluate its sensitivity, reliability and applicability to different flowing conditions

Uma proposta de FSS fractal com geometria simplificada

Frequency Selective Surfaces (FSS) are periodic structures in one or two dimensions that act as spatial filters, can be formed by elements of type conductors patches or apertures, functioning as filters band-stop or band-pass respectively. The interest in the study of FSS has grown through the years, because such structures meet specific requirements as low-cost, reduced dimensions and weighs, beyond the possibility to integrate with other microwave circuits. The most varied applications for such structures have been investigated, as for example, radomes, antennas systems for airplanes, electromagnetic filters for reflective antennas, absorbers structures, etc. Several methods have been used for the analysis of FSS, among them, the Wave Method (WCIP). Are various shapes of elements that can be used in FSS, as for example, fractal type, which presents a relative geometric complexity. This work has as main objective to propose a simplification geometric procedure a fractal FSS, from the analysis of influence of details (gaps) of geometry of the same in behavior of the resonance frequency. Complementarily is shown a simple method to adjust the frequency resonance through analysis of a FSS, which uses a square basic cell, in which are inserted two reentrance and dimensions these reentrance are varied, making it possible to adjust the frequency. For this, the structures are analyzed numerically, using WCIP, and later are characterized experimentally comparing the results obtained. For the two cases is evaluated, the influence of electric and magnetic fields, the latter through the electric current density vector. Is realized a bibliographic study about the theme and are presented suggestions for the continuation of this work

Uma proposta de um controlador adaptativo por posicionamento de pólos e estrutura variável

There are two main approaches for using in adaptive controllers. One is the so-called model reference adaptive control (MRAC), and the other is the so-called adaptive pole placement control (APPC). In MRAC, a reference model is chosen to generate the desired trajectory that the plant output has to follow, and it can require cancellation of the plant zeros. Due to its flexibility in choosing the controller design methodology (state feedback, compensator design, linear quadratic, etc.) and the adaptive law (least squares, gradient, etc.), the APPC is the most general type of adaptive control. Traditionally, it has been developed in an indirect approach and, as an advantage, it may be applied to non-minimum phase plants, because do not involve plant zero-pole cancellations. The integration to variable structure systems allows to aggregate fast transient and robustness to parametric uncertainties and disturbances, as well. In this work, a variable structure adaptive pole placement control (VS-APPC) is proposed. Therefore, new switching laws are proposed, instead of using the traditional integral adaptive laws. Additionally, simulation results for an unstable first order system and simulation and practical results for a three-phase induction motor are shown

Uma proposta de metodologia para o ensino de Física usando robótica de baixíssimo custo

This paper presents methodology based on Lev Vigotsky`s social interactionist theory through investigative activities, which integrates the teaching of physics to robotics, directed to students of the Physics degree course, seeking to provide further training for future teachers. The method is organized through educational robotics workshops that addresses concepts of physics through the use of low-cost educational robots along with several activities. The methodology has been presented and discussed and put into practice afterwards in workshops so that these future teachers may be able to take robotics to their classroom. Students from the last and penultimate semester of the Physics degree course of the Federal Institute of Education, Science and Technology of Rio Grande do Norte, Caicó campus participated in this project

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Caracterização de Efluente Têxtil e Proposta de Tratamento

Textile industry deals with a high diversity of processes and generation of wastewaters with a high content of pollutant material. Before being disposed of in water bodies, a pre-treatment of the effluent is carried out, which is sometimes ineffective. In order to be properly treated, physical and chemical properties of the effluent must be known, as well as the pollutant agents that might be present in it. This has turned out to be a great problem in the textile industry, for there is a variety of processes and the pollutant load is very diversified. The characterization of the effluent allows the identification of most critical points and, as a consequence, the most appropriate treatment procedure to be employed, may be chosen. This study presents the results obtained after characterizing the effluent of a textile industry that comprises knitting, dyeing and apparel sections, processing mainly polyester/cotton articles. In this work, twenty samples of the effluent were collected, and related to the changes in production. From the results, a statistical evaluation was applied, determined in function of the rate of flow. The following properties and pollutants agents were quantitatively analysed: temperature; pH; sulfides; chlorine; alcalinity; chlorides; cianides; phenols; color; COD (Chemical Oxygen Demand); TOC (Total Organic Carbon); oil and grease; total, fixed and volatile solids; dissolved, fixed and volatile solids; suspended, fixed and volatile solids; setteable solids and heavy metals such as cadmium, copper, lead, chromium, tin, iron, zinc and nickel. Analyses were carried out according to ABNT NBR 13402 norm, based upon Standard Methods for the Examination of Water and Wastewater. As a consequence, a global treatment proposal is presented, involving clean production practices as contaminant load reducer, followed by conventional (biological) treatment

Proposta de zoneamento ambiental visando a proteção dos recursos hídricos de uma bacia hidrográfica

One of the most important natural resources for sustaining human life, water, has been losing the basic requirements of quality and quantity sufficient enough to attend the population due to water contamination'problems, often caused by human beings themselves. Because of this, the sources of this resource are often located in remote places of the natural environment to ensure the quality of the water. However, when urban expansion began to occupy these areas, which were once regarded as distant, environmental pollution problems began to occur due to occupation of the land without planning. Based on this occurrence, this study aims to propose environmental zoning for the Maxaranguape river watershed in order to protect its water resources. This is important because this river can serve as a source of supply for the metropolitan area of Natal, the capital of Rio Grande do Norte. In accordance to this proposition, the model of natural soil loss vulnerability (CREPANI et al., 2001), the model of aquifer pollution vulnerability (FOSTER et al., 2006), and the legal incompatibility map (CREPANI et al., 2001) were used to delimit the zones. All this was done with Geographic Information System (GIS) and also created a geographic database update of the basin. The results of the first model mentioned indicated that 63.67% of the basin was classified as moderately stable / vulnerable, 35.66% as moderately vulnerable, and 0.67% as vulnerable. The areas with high vulnerability degree correspond with sand dunes and river channels areas. The second model indicated that 2.84% of the basin has low vulnerability, 70.27%) has median vulnerability, and 26.76% and 0.13% has high vulnerability and extreme vulnerability, respectively. The areas with the highest vulnerability values also refer to part of the sand dunes and river channels besides other areas such as Pureza urban area. The legal incompatibility map indicated that the basin has 85.02 km2 of Permanent Protection Area (PPA) and 14.62% of this area has some incongruity of use. Based on these results it was possible to draw three main zones: Protection and Sustainable Use Zone (PSUZ), Protection and Environmental Restoration Zone (PERZ) and Environmental Control Zone, which are divided into A, B and C. The PSUZ refer to the coastal areas of the basin, where the sand dunes are located. These sites should be areas of environmental protection and of sustainable urban expansion. The ZPRA refer to river channels, which are in high need of rehabilitation. The third zone corresponds to the rest of the basin which should have, in general, the mapping of possible sources of contamination for further control on the use and occupation of the river

Números complexos: uma proposta de mudança metodológica para uma aprendizagem significativa no ensino médio

This work presents a proposal of a methodological change to the teaching and learning of the complex numbers in the Secondary education. It is based on the inquiries and difficulties of students detected in the classrooms about the teaching of complex numbers and a questioning of the context of the mathematics teaching - that is the reason of the inquiry of this dissertation. In the searching for an efficient learning and placing the work as a research, it is presented a historical reflection of the evolution of the concept of complex numbers pointing out their more relevant focuses, such as: symbolic, numeric, geometrical and algebraic ones. Then, it shows the description of the ways of the research based on the methodology of the didactic engineering. This one is developed from the utilization of its four stages, where in the preliminary analysis stage, two data surveys are presented: the first one is concerning with the way of presenting the contents of the complex numbers in math textbooks, and the second one is concerning to the interview carried out with High school teachers who work with complex numbers in the practice of their professions. At first, in the analysis stage, it is presented the prepared and organized material to be used in the following stage. In the experimentation one, it is presented the carrying out process that was made with the second year High school students in the Centro Federal de Educação tecnológica do Rio Grande do Norte CEFET-RN. At the end, it presents, in the subsequent and validation stages, the revelation of the obtained results from the observations made in classrooms in the carrying out of the didactic sequence, the students talking and the data collection

Uma proposta para o ensino de eletromagnetismo no nível médio

This paper aims at building a proposal for teaching of electromagnetism in the secondary level in the state public school in Natal, RN, encompassing at the most possible comprehensive manner the fundamental aspects of electromagnetism. The methodology employed here is prioritize physical concepts rather than instruments (such as the mathematics), which should have the connotation of just tools, or of aids in the context of physics teaching in the referred teaching level. The proposal is to give teachers a consultation resource, from differentiated lesson plans, which have as main focus activities based primarily in texts and active participation of students in the teaching- learning process and the implementation of the PCN+ proposals (BRAZIL, 2000), which suggest alternative ways to make the practice in the classroom more exciting, targeting a significant teaching-learning process for both the teacher and the student. This material was applied during the 3rd and 4th term (i.e., bimester) throughout the school year of 2007, in the State School Teacher Varela Barca in two classes (3V1 and 3V2) of 3rd grade of secondary level. As evaluation of the implementation of this proposal one can cite that students were more secure when to apply the concepts, when conducting the experiments, and less anxious when formal evaluation of the evidence, showing greater motivation when presented to electromagnetism contextualized in their everyday situations. The product of this educational work includes, besides the dissertation, the lesson plans, itineraries and experimental assessment of the instruments used (Annex E to I)

Física para geografia: desafios de uma proposta pedagógica interdisciplinar

This study has as its aim the elaboration, presentation and application of a proposal which makes possible an inter-disciplinary relationship between knowledge of physics and geography in the graduation course for forming geography teachers in the Dom Aureliano Matos Faculty of Philosophy in the city of Limoeiro do Norte in the State of Ceára. Initially, we observe in pertinent literature and opinions of specialists what capacities and abilities are suggested for a future teacher of geography. Following that, we select subject matter which broaches upon physic concepts and may be contextualized within topics present in the daily fare of a geography teacher, such as natural phenomena related principally to natural environment and climate, envolving astronomic features, using didactic materials and resources in easily understood language and without the excessive presence of mathematical formulas. An evaluation of the experience allows us to affirm that inter-disciplinary treatment, as an important alternative for curriculam organization, when applied in the classroom shows that there is better learning, a reduction in class evasion and a significant fall in failures when compared with traditional proposals for the teaching of physics in relation to geography. On the other hand, it is notable that to maintain and augment such measures it is a challenge to be met, with the purpose that students of other courses may perceive that physic concepts have much to do with their reality, and that understanding them is relevant for their professional and personal formation

Linguagem matemática: uma proposta de ensino e avaliação da compreensão leitora dos objetos da matemática

This paper discusses aspects related to the mathematical language and its understanding, in particular, by students of final years of elementary school. Accordingly, we aimed to develop a proposal for teaching, substantiated by mathematical modeling activities and reading, which takes advantage of the student of elementary school a better understanding of mathematical language for the content of proportion. We also aim to build / propose parameters for the assessment of reading proficiency of the language of the student in analyzing and modeling process, its ability to develop/improve/enhance this proficiency. For this purpose, we develop a qualitative research, with procedures for an action research whose analysis of the data is configured as Content Analysis. We refer to epistemological and didactic, in the studies: Piaget (1975, 1990), Vygotsky (1991, 2001), Bakhtin (2006), Freire (1974, 1994), Bicudo and Garnica (2006), Smole and Diniz (2001), Barbosa (2001), Burak (1992), Biembengut (2004), Bassanezi (2002), Carrasco (2006), Becker (2010), Zuin and Reyes (2010), among others. We understand that to acquire new knowledge one must learn to read and reading to learn it, this process is essential for the development of reading proficiency of a person. Modeling, in turn, is a process which enables contact with different forms of reading providing elements favorable to the development here mentioned. The evaluation parameters we use to analyze the level of reading proficiency of mathematical language proved to be effective and therefore a valuable tool that allows the teacher an efficient evaluation and whose results can guide you better in the planning and execution of their practice