Sistemas de dunas do parque das Dunas e Barreiras do Inferno/Natal (RN: levantamento geológico /geofísico, elaboração do modelo deterministico e avaliação da vulnerabilidade/suscetibilidade

The current work was developed on the dune systems of the Parque das Dunas and Barreira do Inferno. These places are located in the cities of Natal and Parnamirim (RN, Brazil), respectively. This project has the purpose of developing the deterministic model on a specific blowout at Parque das Dunas, based in the geophysical interpretations of the lines gotten with the Ground Penetration Radar and the planialtimetric acquisitions of the topographical surface of the land. Also analyses of the vulnerability/susceptibility of these dune systems had been done in relation to the human pressures. To develop its deterministic model, it is necessary to acquire inner and outer geometries of the cited blowout. In order to depict inner geometries underneath the surface are used the GPR observing the altimetric control for topographical correction of the GPR lines. As for the outer geometries, the geodesic GPS gives us the planialtimetric points (x, y and z points) with milimetric precision, resulting in high-resolution surfaces. Using interpolation methods of the planialtimetric points was possible create Digital Elevations Models (DEM´s) of these surfaces. As a result, 1,161.4 meters of GPR lines were acquired on the blowout at the Parque das Dunas and 3,735.27 meters on the blowout at the Barreira do Inferno. These lines had been acquired with a 200 MHz antenna, except the 7 and 8 lines, for which we had been used a 100 MHz antenna. The gotten data had been processed and interpreted, being possible to identify boundary surfaces of first, second and third order. The first order boundary surface is related with the contact of the rocks of the Barreiras Group with the aeolian deposits. These deposits had been divided in two groups (Group 1 and Group 2) which are related with the geometry of stratum and the dip of its stratifications. Group 1 presented stratum of sigmoidal and irregular geometries and involved bodies where the reflectors had presented dips that had varied of 20 to the 28 degrees for the Parque das Dunas blowout and of 22 to the 29 degrees for the Barreira do Inferno blowout. Usually, it was limited in the base for the first order surface and in the top for the second order surface. Group 2 presented stratum of trough, wedge or lens geometries, limited in the base for the second order vi surface, where the corresponding deposits had more shown smoothed reflectors or with dips of low angle. The Deterministic and Digital Elevation Models had been developed from the integration and interpretation of the 2D data with the GOCAD® program. In Digital Elevations Models it was possible to see, for the localities, corridor or trough-shaped blowouts. In Deterministic Model it was possible to see first and second order boundary surfaces. For the vulnerability/susceptibility of the dune systems it was applied the methodology proposal by Boderè al (1991); however the same one did not show adequate because it evaluates actual coastal dunes. Actual coastal dunes are dunes that are presented in balance with the current environmental conditions. Therefore, a new methodology was proposal which characterizes the supplying and activity sedimentary, as well as the human pressures. For the methodology developed in this work, both the localities had presented a good management. The Parque das Dunas was characterized as a relic dune system and the Barreira do Inferno was characterized as a palimpsestic dune system. Also two Thematic Maps had been elaborated for the environmental characterization of the studied dune systems, with software ArcGis 8.3, and its respective data bases

Iinterpretação conjunta de dados de GPR e medidas de permeabilidade sobre um análogo de reservatório siliciclástico falhado na bacia de Tucano, no NE do Brasil

It is presented an integrated geophysical investigation of the spatial distribution of faults and deformation bands (DB´s) in a faulted siliciclastic reservoir analogue, located in Tucano Basin, Bahia State, northeastern Brazil. Ground Penetrating Radar (GPR) and permeability measurements allowed the analysis of the influence of DB´s in the rock permeability and porosity. GPR data were processed using a suitable flow parametrization in order to highlight discontinuities in sedimentary layers. The obtained images allowed the subsurface detection of DB´s presenting displacements greater that 10 cm. A good correlation was verified between DB´s detected by GPR and those observed in surface, the latter identified using conventional structural methods. After some adaptations in the minipermeameter in order to increase measurement precision, two approaches to measure permeabilities were tested: in situ and in collected cores. The former approach provided better results than the latter and consisted of scratching the outcrop surface, followed by direct measurements on outcrop rocks. The measured permeability profiles allowed to characterize the spatial transition from DB´s to undeformed rock; variation of up to three orders of magnitude were detected. The permeability profiles also presented quasi-periodic patterns, associated with textural and granulometric changes, possibly associated to depositional cycles. Integrated interpretation of the geological, geophysical and core data, provided the subsurface identification of an increase in the DB´s number associated with a sedimentary layer presenting granulometric decrease at depths greater than 8 m. An associated sharp decrease in permeability was also measured in cores from boreholes. The obtained results reveal that radagrams, besides providing high resolution images, allowing the detection of small structures (> 10 cm), also presented a correlation with the permeability data. In this way, GPR data may be used to build upscaling laws, bridging the gap between outcrop and seismic data sets, which may result in better models for faulted reservoirs

A preceptoria na estratégia saúde da família: o olhar dos profissionais de saúde

The proposal of teaching-service integration from work experience brings a challenge to the professionals involved in health services: to combine their healthcare practice to the preparation of new professionals in accordance with the national health model. In Recife, the assistance network is known as school network, since it provides all its health equipment for Higher Education Institutions, in special for professionals who work as preceptors, making this activity an important component of the services network. The objective of the present study was to analyze preceptorship experience herein Multidisciplinary Residences in Health in the look of health professionals. This is a qualitative descriptive study, involving physicians, dentists, and nurses that have worked as preceptors for at least two years in multidisciplinary residency linked to two Higher Education Institutions. A semistructured interview was used as research instrument and data were processed by using the software Alceste 4.9. Results indicated four semantic classes which were divided into two axis. Axis 1, composed of class 4, and Axis 2, composed of classes 3, 2 and 1. Categorization considered the relation between classes. It was observed that in class 4 work overload is a dilemma for professional participation in preceptorship. This is noted by the words manage, time, patient, give, and complicated. However, it is also observed that the preceptorship involves positive learning and teaching actions, reinforced by the words say, explain, and discuss. Class 2 shows the preceptorship as an experience exchange, a positive moment that provides theoretical upgrade to the preceptor, associated to the professional practices performed by the binominal preceptor-student in health services and communities. In this perspective, everyone is benefited since preceptorship is structured according to dynamic aspects of knowledge, experienced in settings permeated by people´s health necessities. In class 3, potentialities of this practice are shown, and personal compromise is the main reason of acting as a preceptor in this network of education/attention, demonstrated in the words reason, formation, to like and professionals. Last, but not the least, class 1 suggests the importance of preceptorship and one of the strategies to create the National Politics of Humanization, from the teachingservice-community integration, observed in the words: arrives, university, fundamental, manner, partnership, service, and student. Besides, it rates perspectives and challenges for the improvement of the preceptorship in health services. Integrating teaching and service can enhance the proposals of changes concerning the healthcare model practiced in services, but this relation is still superficial. The preceptor is an actor in action, playing real life roles, and that is when he becomes essential to seek training with the profile defended in the proposed training of a professional who is capable of learning to learn

Análise da dinâmica deposicional das praias de Cacimbinha e do Madeiro, Tibau do Sul-RN, Brasil

The Cacimbinha and Madeiro beaches are located in the eastern coast of Rio Grande do Norte state, in the municipality of Tibau do Sul. Given the indicative of erosion in the coast of this district and the coastal processes acting on the beaches, the global aim of this project is comprehend the evolution of depositional environment on the Cacimbinha beach, moreover, the project seeks to characterize deposits from the Cacimbinha and Madeiro beaches, according to the geomorphologic compartments identified on these beaches; distinguish the coastal features which possibly interact with the Cacimbinha beach; identify the potential relationship between the sediments from the coastal features and the deposits from Cacimbinha beach; understand which depositional processes that prevail at each facies deposited on the beach; and identify the probable sedimentary environments and its energy of deposition through of the materials recorded on the Cacimbinha beach. This study was based on previous bibliographic and field research, both guided by academic works, laws, concepts and theories concerning the physical geography, geomorphology of the quaternary, sedimentary geology and stratigraphy. Thus, the methodology was divided in three steps: Prefield step: office work was performed; Field step: Sampling of facies of sedimentation; PosField step: analysis and integration of data obtained during the research period. Thus, the results showed deposicional facies with distinguished energy in the relief compartments, beach and terrace. After the sedimentary analysis and its interpretation linked to the architecture of the mounted sections based on drilling, it became possible to trace the evolutionary history of this stretch of beach. Therefore, it can be stated that studies performed on coastal areas are of great importance, as long as, around the world, the most part of urban zones are seated on deposits of quaternary age and, then this work improve the knowledge regarding the sedimentary dynamics of this beach, becoming scientific support for management and planning of this area which focus on, mainly, the foreign tourism

Secagem de resíduo de goiaba em secador convectivo de bandejas: modelagem matemática e análise do processo

Actually, Brazil is one of the larger fruit producer worldwide, with most of its production being consumed in nature way or either as juice or pulp. It is important to highlig ht in the fruit productive chain there are a lot lose due mainly to climate reasons, as well as storage, transportation, season, market, etc. It is known that in the pulp and fruit processing industy a yield of 50% (in mass) is usually obtained, with the other part discarded as waste. However, since most this waste has a high nutrient content it can be used to generate added - value products. In this case, drying plays an important role as an alternative process in order to improve these wastes generated by the fruit industry. However, despite the advantage of using this technique in order to improve such wastes, issues as a higher power demand as well as the thermal efficiency limitation should be addressed. Therefore, the control of the main variables in t his drying process is quite important in order to obtain operational conditions to produce a final product with the target specification as well as with a lower power cost. M athematical models can be applied to this process as a tool in order to optimize t he best conditions. The main aim of this work was to evaluate the drying behaviour of a guava industrial pulp waste using a batch system with a convective - tray dryer both experimentally and using mathematical modeling. In the experimental study , the dryin g carried out using a group of trays as well as the power consume were assayed as response to the effects of operational conditions (temperature, drying air flow rate and solid mass). Obtained results allowed observing the most significant variables in the process. On the other hand, the phenomenological mathematical model was validated and allowed to follow the moisture profile as well as the temperature in the solid and gas phases in every tray. Simulation results showed the most favorable procedure to o btain the minimum processing time as well as the lower power demand.

Tratamento de argila montmorilonítica para a produção de nanocompósitos poliméricos com retardo de propagação de chama

Compared to conventional composites, polymer matrix nanocomposites typically exhibit enhanced properties at a significantly lower filler volume fraction. Studies published in the literature indicate t hat the addition of nanosilicate s can increase the resistance to flame propagation in polymers. In this work, a treatment of montmorillonite (MMT) nano clay and the effect of its ad dition o n flame propagation characteristics of vinyl ester were studied. The resea rch was conducted in two stages. The first stage focused on the purification and activation of the MMT clay collected from a natural deposit to improve compatibility with the polymer matrix . Clay modification with sodium acetate was also studied to improve particle dispersion in the polymer. The second step was focused on the effect of the addition of the treated clay on nanocomposites ’ properties. Nanocomposites with clay con tents of 1, 2, 4 wt. % were processed. T he techniques for the characterization of the clay included X - ray fluorescence (XRF), X - r ay d iffraction (XRD), thermogravimetric a nalysis (TGA), d ifferential scanning c alorimetry (DSC) , s urface area (BET) and Fourier transform infrared spectroscopy (FTIR). For t he characterization of the nanocomposites , the techniques used were thermogravimetric a nalysis (TGA) , differential scanning c alorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) , scanning electron mi croscopy (SEM), transmission electron m icroscopy (TEM), and the determination of tensile strength, modulus of elasticity and resistance to flame propagation. According to the results, the purification and activation treatment with freeze - drying used in thi s work for the montmorillonite clay was efficient to promote compatibility and dispersion in the polymer matrix as evidenced by the characterization of the nanocomposite s . It was also observed that the clay modifica tion using sodium acetate did not produce any significant effect to improve compatibilization of the clay with the polymer. The addition of the treated MMT resulted in a reduction of up to 53% in the polymer flame propagation speed and did not affect the mechanical tensile strength and modulus o f elas ticity of the polymer, indicating compatibility between the clay and polymer. The effectiveness in reducing flame propagation speed peaked for nanocomposites with 2 wt. % clay, indicating that this is the optimum clay concentration for this property. T he clay treatment used in this work enables the production of vinylester matrix nanocomposites with flame - retardancy properties .

Análise de confiabilidade de um moto-ventilador centrífugo: aplicação no sistema de pressurização de subestação industrial para garantia da segurança operacional na indústria petroquímica

The need of the oil industry to ensure the safety of the facilities, employees and the environment, not to mention the search for maximum efficiency of its facilities, makes it seeks to achieve a high level of excellence in all stages of its production processes in order to obtain the required quality of the final product. Know the reliability of equipment and what it stands for a system is of fundamental importance for ensuring the operational safety. The reliability analysis technique has been increasingly applied in the oil industry as fault prediction tool and undesirable events that can affect business continuity. It is an applied scientific methodology that involves knowledge in engineering and statistics to meet and or analyze the performance of components, equipment and systems in order to ensure that they perform their function without fail, for a period of time and under a specific condition. The results of reliability analyzes help in making decisions about the best maintenance strategy of petrochemical plants. Reliability analysis was applied on equipment (bike-centrifugal fan) between the period 2010-2014 at the Polo Petrobras Guamaré Industrial, situated in rural Guamaré municipality in the state of Rio Grande do Norte, where he collected data field, analyzed historical equipment and observing the behavior of faults and their impacts. The data were processed in commercial software reliability ReliaSoft BlockSim 9. The results were compared with a study conducted by the experts in the field in order to get the best maintenance strategy for the studied system. With the results obtained from the reliability analysis tools was possible to determine the availability of the centrifugal motor-fan and what will be its impact on the security of process units if it will fail. A new maintenance strategy was established to improve the reliability, availability, maintainability and decreased likelihood of Moto-Centrifugal Fan failures, it is a series of actions to promote the increased system reliability and consequent increase in cycle life of the asset. Thus, this strategy sets out preventive measures to reduce the probability of failure and mitigating aimed at minimizing the consequences.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Avaliação multidimensional da qualidade de vida em idosos: um estudo no Curimataú ocidental paraibano

The fast growth of the elderly population is a reality throughout the world and has become one of the greatest challenges for contemporary public health. When considering the increased life expectancy and the aging as a multidimensional phenomenon, one should highlight the need to investigate if the increase of longevity is associated with satisfactory levels of Quality of Life (QOL). This study has the objective of assessing the QOL of elderly people from the Paraíba’s Western Curimataú microregion, explained by its health and living conditions. This is a cross-sectional and observational study with quantitative design held with 444 elderly people from five cities: Barra de Santa Rosa, Cuité, Nova Floresta, Remígio e Sossego. In order to obtain information, the following instruments were used: I) Questionnaire for collection data related to the elderly population, for sociodemographic, clinical and behavioral characteristics; and II) WHOQOL-Old questionnaire, with a view to measuring and assessing QOL. Data were processed on the IBM-SPSS Statistics 20.0 software by means of the ANOVA (one-way), Student’s t, Mann-Whitney, Kruskal-Wallis and Pearson’s correlation tests, with p-values<0,05 accepted as being statistically significant. The results indicate a good global QOL (ETT=65,69%), with better assessment by elderly men, aged between 60 and 74 years, married, living with partner and children, without caregiver, physical activity practitioners, with up to one health problem before an aspect of multimorbidity and with very good and/or good assessment of basic needs. The self-reported stress showed a negative significant correlation before the global QOL, where the greater the perception of stress, the worse the assessment of QOL. In the faceted assessment of QOL, the Sensory Operation showed the best performance (ETF= 68,86%) and the Social Participation (SP) the worst (ETF=60,37%). In the multiple linear regression model, SP is singly responsible for 51,8% (R2=0,518) of explanation of the global QOL. In the intercorrelation among the WHOQOL-Old facets, only Death and Dying did not reveal significance. The harmony highlighted among the facets raises the need to ensure a comprehensive health care for the elderly population, especially in understanding the social participation as an intrinsic part of the QOL and that it requires the re-discussion and reconstruction of individual and collective, family and community, political and government actions. Hence, guaranteeing an active, healthy and participatory aging, with QOL, is the major challenge.

Avaliação multidimensional da qualidade de vida em idosos: um estudo no Curimataú ocidental paraibano

The fast growth of the elderly population is a reality throughout the world and has become one of the greatest challenges for contemporary public health. When considering the increased life expectancy and the aging as a multidimensional phenomenon, one should highlight the need to investigate if the increase of longevity is associated with satisfactory levels of Quality of Life (QOL). This study has the objective of assessing the QOL of elderly people from the Paraíba’s Western Curimataú microregion, explained by its health and living conditions. This is a cross-sectional and observational study with quantitative design held with 444 elderly people from five cities: Barra de Santa Rosa, Cuité, Nova Floresta, Remígio e Sossego. In order to obtain information, the following instruments were used: I) Questionnaire for collection data related to the elderly population, for sociodemographic, clinical and behavioral characteristics; and II) WHOQOL-Old questionnaire, with a view to measuring and assessing QOL. Data were processed on the IBM-SPSS Statistics 20.0 software by means of the ANOVA (one-way), Student’s t, Mann-Whitney, Kruskal-Wallis and Pearson’s correlation tests, with p-values<0,05 accepted as being statistically significant. The results indicate a good global QOL (ETT=65,69%), with better assessment by elderly men, aged between 60 and 74 years, married, living with partner and children, without caregiver, physical activity practitioners, with up to one health problem before an aspect of multimorbidity and with very good and/or good assessment of basic needs. The self-reported stress showed a negative significant correlation before the global QOL, where the greater the perception of stress, the worse the assessment of QOL. In the faceted assessment of QOL, the Sensory Operation showed the best performance (ETF= 68,86%) and the Social Participation (SP) the worst (ETF=60,37%). In the multiple linear regression model, SP is singly responsible for 51,8% (R2=0,518) of explanation of the global QOL. In the intercorrelation among the WHOQOL-Old facets, only Death and Dying did not reveal significance. The harmony highlighted among the facets raises the need to ensure a comprehensive health care for the elderly population, especially in understanding the social participation as an intrinsic part of the QOL and that it requires the re-discussion and reconstruction of individual and collective, family and community, political and government actions. Hence, guaranteeing an active, healthy and participatory aging, with QOL, is the major challenge.

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase