Bibliotecas digitais de teses e dissertações brasileiras: paradigma do acesso livre à informação científica

A evolução da comunicação científica ao longo do tempo e o impacto causado pela A evolução da comunicação científica ao longo do tempo e o impacto causado pela A evolução da comunicação científica ao longo do tempo e o impacto causado pela se analisar as contribuições da Biblioteca Digital de Teses e Dissertações (BDTD)para a comunicação científica atual, destacando possibilidades emergentes e desafios a serem superados. Apresenta uma breve evolução da comunicação científica ao longo do tempo; discute os impactos causados pela Internet na comunicação, disponibilização e acessibilidade de informações técnico-científicas; e caracteriza BDTD destacando os desafios a serem superados. Dentre eles estão, a questão dos direitos autorais que ocasionam a baixa adesão dos autores ao projeto piloto do IBICT para disponibilizar teses e dissertações no meio eletrônico. Para este desafio, são apontadas sugestões.

Fatores inibidores à adoção de tecnologias de informação em micro e pequenas empresas fornecedoras da vale no estado do Pará

Universidade Estadual do Rio Grande do Norte

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers

Análise da sobre-reação e sub-reação nos ativos de primeira e segunda lina do mercado acionário brasileiro

The Behavioral Finance develop as it is perceived anomalies in these markets efficient. This fields of study can be grouped into three major groups: heuristic bias, tying the shape and inefficient markets. The present study focuses on issues concerning the heuristics of representativeness and anchoring. This study aimed to identify the then under-reaction and over-reaction, as well as the existence of symmetry in the active first and second line of the Brazilian stock market. For this, it will be use the Fuzzy Logic and the indicators that classify groups studied from the Discriminant Analysis. The highest present, indicator in the period studied, was the Liabilities / Equity, demonstrating the importance of the moment to discriminate the assets to be considered "winners" and "losers." Note that in the MLCX biases over-reaction is concentrated in the period of financial crisis, and in the remaining periods of statistically significant biases, are obtained by sub-reactions. The latter would be in times of moderate levels of uncertainty. In the Small Caps the behavioral responses in 2005 and 2007 occur in reverse to those observed in the Mid-Large Cap. Now in times of crisis would have a marked conservatism while near the end of trading on the Bovespa speaker, accompanied by an increase of negotiations, there is an overreaction by investors. The other heuristics in SMLL occurred at the end of the period studied, this being a under-reaction and the other a over-reaction and the second occurring in a period of financial-economic more positive than the first. As regards the under / over-reactivity in both types, there is detected a predominance of either, which probably be different in the context in MLCX without crisis. For the period in which such phenomena occur in a statistically significant to note that, in most cases, such phenomena occur during the periods for MLCX while in SMLL not only biases are less present as there is no concentration of these at any time . Given the above, it is believed that while detecting the presence of bias behavior at certain times, these do not tend to appear to a specific type or heuristics and while there were some indications of a seasonal pattern in Mid- Large Caps, the same behavior does not seem to be repeated in Small Caps. The tests would then suggest that momentary failures in the Efficient Market Hypothesis when tested in semistrong form as stated by Behavioral Finance. This result confirms the theory by stating that not only rationality, but also human irrationality, is limited because it would act rationally in many circumstances

A Tecnologia da informação como fator de competitividade em um apl: o caso da carcinicultura do RN

Este estudo aborda a utilização da tecnologia da informação de forma competitiva em um Arranjo Produtivo Local APL. Realizou-se no APL da carcinicultura no Estado do Rio Grande do Norte e teve por objetivo buscar a compreensão de como o uso da tecnologia da informação (TI) contribui para o aumento da competitividade na atividade do APL citado. APL pode ser conceituado como uma aliança entre organizações que possuem um projeto coletivo, para elevar a sua competitividade e participação no mercado. Para atingir este objetivo, foi realizada uma pesquisa descritiva, através da utilização de múltiplos casos selecionados dentre as empresas que compõem o APL da carcinicultura no RN. Os dados coletados foram analisados qualitativamente. Os resultados da pesquisa indicaram que as empresas percebem a importância do uso da TI, mas que, na prática, a sua utilização é limitada, principalmente em se tratando de Sistemas Integrados de Gestão e Comércio Eletrônico. Outro resultado encontrado foi que as empresas, embora façam parte do APL, ainda não colaboram entre si, seja através da troca de informações, ou através de Sistemas de Informação Interorganizacional. As principais recomendações diante destes resultados é que as empresas atuem ativamente para o fortalecimento do APL. No que se refere ao uso da TI faz-se necessário que elas invistam na aquisição de sistemas integrados de gestão e sistemas de informação interorganizacional para o melhor gerenciamento das informações ao longo da cadeia

Atividade β-D-N-Acetilglucosaminidásica de enzimas imobilizadas extraídas da Artemia franciscana e possíveis aplicações biotecnológicas

A β-D-N-acetilglucosaminidase extracted and partially isolated from crustacean Artemia franciscana by ammonium sulfate precipitation and filtration gel chromatography Bio Gel A 1.5m. the enzyme was immobilized on ferromagnetic Dacron yielding a insoluble active derivative with 5.0 units/mg protein and 10.35% of the soluble enzyme activity. β-D-N-acetilglucosaminidase-ferromagnetic Dacron was easily removed from the reaction mixture by a magnetic field, it was reused for ten times without loss in its activity. The ferromagnetic Dacron was better activated at pH 5.0. The particles visualized at scanning electron microscope (SEM) had presented different sizes, varying between 721nm and 100µm. Infra red confirmed immobilization on support, as showed by primary amino peaks at 1640 and 1560 cm-1 . The immobilize enzyme presented Km of 2.32 ± 0.48 mM and optimum temperature of 50°C. Bought presented the same thermal stable of the soluble enzyme and larger enzymatic activity at pH 5.5. β-D-N-acetilglucosaminidase-Dacron ferromagnético showed sensible for some íons as the silver (AgNO3), with loss of activity. The β-D-N acetilglucosaminidase activity for mercury chloride (HgCl2), whom is one of the most toxic substance joined in nature, it was presented activity already diminished at 0,01mM and lost total activity at 4mM, indicating sensitivity for this type of metal. β-D-N-acetilglucosaminidase-ferromagnetic Dacron showed degradative capacity on heparan sulfate, the enzyme still demonstrated degradative capacity on heparan sulphate, suggesting a possible application to produce fractions of this glycosaminoglycan

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Estudo da sinterização do aço inox 316L reforçado com 3% Carbeto de Tântalo - TaC

The present work shows a contribution to the studies of development and solid sinterization of a metallic matrix composite MMC that has as starter materials 316L stainless steel atomized with water, and two different Tantalum Carbide TaC powders, with averages crystallite sizes of 13.78 nm and 40.66 nm. Aiming the metallic matrix s density and hardness increase was added different nanometric sizes of TaC by dispersion. The 316L stainless steel is an alloy largely used because it s high resistance to corrosion property. Although, its application is limited by the low wear resistance, consequence of its low hardness. Besides this, it shows low sinterability and it cannot be hardened by thermal treatments traditional methods because of the austenitic structure, face centered cubic, stabilized mainly in nickel presence. Steel samples added with TaC 3% wt (each sample with different type of carbide), following a mechanical milling route using conventional mill for 24 hours. Each one of the resulted samples, as well as the pure steel sample, were compacted at 700 MPa, room temperature, without any addictive, uniaxial tension, using a 5 mm diameter cylindrical mold, and quantity calculated to obtain compacted final average height of 5 mm. Subsequently, were sintered in vacuum atmosphere, temperature of 1290ºC, heating rate of 20ºC/min, using different soaking times of 30 and 60 min and cooled at room temperature. The sintered samples were submitted to density and micro-hardness analysis. The TaC reforced samples showed higher density values and an expressive hardness increase. The complementary analysis in optical microscope, scanning electronic microscope and X ray diffractometer, showed that the TaC, processed form, contributed with the hardness increase, by densification, itself hardness and grains growth control at the metallic matrix, segregating itself to the grain boarders

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Análise das emissões gasosas de um veículo flex funcionando com diferentes combustíveis

Efforts in research and development of new technologies to reduce emission levels of pollutant gases in the atmosphere has intensified in the last decades. In this context, it can be highlighted the modern systems of electronic engine management, new automotive catalysts and the use of renewable fuels which contributes to reduce the environmental impact. The purpose of this study was a comparative analysis of gas emissions from a automotive vehicle, operating with different fuels: natural gas, AEHC or gasoline. To execute the experimental tests, a flex vehicle was installed on a chassis dynamometer equipped with a gas analyzer and other complementary accessories according to the standard guidelines of emission and security procedures. Tests were performed according to NBR 6601 and NBR 7024, which define the urban and road driving cycle, respectively. Besides the analysis of exhaust gases in the discharge tube, before and after the catalyst, using the suction probe of the gas analyzer to simulate the vehicle in urban and road traffic, were performed tests of fuel characterization. Final results were conclusive in indicating leaded gasoline as the fuel which most contributed with pollutant emissions in atmosphere and the usual gasoline being the fuel which less contributed with pollutant emissions in atmosphere

Imagem corporal e fatores de risco em praticantes de caminhada da cidade do Natal-RN

Body image is the figure of our bodies built in our minds and the degree of dissatisfaction is often associated with risk factors identified by anthropometric measures. The purpose of this descriptive study was to evaluate the risk factors associated to morphological and functional variables associate to the perception of auto-image in middle-aged walkers of the south zone of the city of Natal. A hundred and thirty volunteers had been evaluated in four groups in function of the gender and age group. As measurement evaluations were used an auto-image perception questionnaire proposed by Stunkart of nine silhouettes numbered for both gender was applied; a weighing machine equipped with stadiometer for the body mass (kg) and stature (m) and the body mass index (kg/m2) that was calculated with base in measures of the body weight and stature and classified according to norms of the National Institute of Health (2000) as well as the systolic and diastolic blood pressure by a electronic digital device (DIGITRONIC). A metal anthropometric tape was used for the waist to hip ratio (WHR). It was used Analyses of variance (ANOVA) one-way, post hoc of Tukey and correlation of Spearman for the nonparametric data adopting the level of ρ≤ 0,05 for rejection of the null hypothesis. The body mass index indicated high factors of risk in the consisting groups. In all the groups were registered the desire to reduce their silhouettes. The body weight shows reduced when compared with the younger group in the male group of superior age group, while in the female group the inverse one occurs. The autoimage perception is associated with the classification of the waist to hip ratio in the female gender in the age group of the 50 to the 59 years and in the classification of the body mass index of all constituted groups. Significant associations had not been found for classification of the systolic and diastolic blood pressure in relation to the auto-image 41 perception. This thesis presents relation of interdisciplinarity and its contents have application in the fields of Physical Education, Medicine, Physiotherapy and Nursing

Formação em odontologia: um estudo sobre as clínicas integradas em cursos do Brasil

Dental education is going through important changes in preparing workers to meet the needs of the society and the labor market. For that reason, we studied the offering of comprehensive dental care clinics in Brazil with the aim of encouraging future curriculum changes focused on the training of general dental practitioners. An email questionnaire on educational organization and comprehensive care clinics of undergraduate programs was sent to each academic dental affairs dean. Sixty-seven (41.6%) dental schools agreed to participate. We observed that curriculum changes have contributed to modify the format of comprehensive care clinics. This was felt mainly (88,1%) with regards to workload and course offerings in different levels of the dental curriculum, thereby creating a favorable environment for generalist training. Most schools shared the following characteristics: clinical procedures were being prioritized according to level of complexity (95,5%), students were having the chance to attend courses in other programs (37,3%), and attempt to diversify teaching methods was being challenged (58,2%). Although progress in combining teaching and clinical services was reported by 83,6% of schools, most clinical procedures were still being performed intramurally (50,7%) in partnership with public service. There was also improvement in clinical mentorship due to the hiring of instructors qualified to work in comprehensive care clinics and with aptitude to supervise a wider range of dental procedures (58,2%). Further changes to Brazilian comprehensive care clinics should hence be encouraged and intensified to ensure appropriate generalist training for dental practitioners

O jingle e outras práticas culturais dos vendedores de rua de Aracaju/SE

This masters dissertation constitutes in a mapping with base in a field research carried in the streets of commercial center and adjacencies of the Aracaju city, capital of Sergipe state, located in Brazilian‟s Northeast. This is a study about the jingle and others social practices found in the day-by-day of streets by the streets sellers. There is a clear intention of consider the pregão singed by sellers of the street how a jingle that is produced, transmitted and accepted in a means social, characterized how cultural manifestation study. Thus, this ethnography aims to observe the use of the jingle and other cultural practices carried out by street vendors, showing how they are produced, disseminated and consumed in everyday life, as a way to do it. These practices that occur in cities since ancient times continue to occur in all Brazilian cities, including the capital cities, although in some cases, some of them such as the jingle, they get more scarce. Specifically aimed at rescuing the memory of these cultural practices, considering them as "tactics" of practitioners, a resistance of street vendors, individuals, "ordinary" real "anonymous wanderers" in the face of pressure from a dominant force and uneven. In this perspective, the present study is based on the theories of Certeau (1990, 1996) and Coradini (1995) on daily life in the cities, seeking to demonstrate how street vendors engage in a "diverted", subversive, selling its products, creating and using the jingle and other similar relationships that are part of common culture, introducing itself as "ways of doing" that are appropriate or re-appropriated, consumed or accepted in joints over time and within the "anthropological urban spatiality