Desenvolvimento de material BaCexPr1-xO3 (0 ≤ X ≤ 1) com estrutura perovskita para oxidação catalítica do CO a CO2 em reator de leito fixo

Barium Cerate (BaCeO3) is perovskite type structure of ABO3, wherein A and B are metal cations. These materials, or doped, have been studied by having characteristics that make them promising for the application in fuel cells solid oxide, hydrogen and oxygen permeation, as catalysts, etc .. However, as the ceramic materials mixed conductivity have been produced by different synthesis methods, some conditions directly influence the final properties, one of the most important doping Site B, which may have direct influence on the crystallite size, which in turn directly influences their catalytic activity. In this study, perovskite-type (BaCexO3) had cerium gradually replaced by praseodymium to obtain ternary type materials BaCexPr1-xO3 and BaPrO3 binaries. These materials were synthesized by EDTA/Citrate complexing method and the material characterized via XRD, SEM and BET for the identification of their structure, morphology and surface area. Moreover were performed on all materials, catalytic test in a fixed bed reactor for the identification of that person responsible for complete conversion of CO to CO2 at low operating temperature, which step can be used as the subsequent production of synthesis gas (CO + H2) from methane oxidation. In the present work the crystalline phase having the orthorhombic structure was obtained for all compositions, with a morphology consisting of agglomerated particles being more pronounced with increasing praseodymium in the crystal structure. The average crystal size was between 100 nm and 142,2 nm. The surface areas were 2,62 m²g-1 for the BaCeO3 composition, 3,03 m²g-1 to BaCe0,5Pr0,5O3 composition and 2,37 m²g-1 to BaPrO3 composition. Regarding the catalytic tests, we can conclude that the optimal flow reactor operation was 50 ml / min and the composition regarding the maximum rate of conversion to the lowest temperature was BaCeO3 to 400° C. Meanwhile, there was found that the partially replaced by praseodymium, cerium, there was a decrease in the catalytic activity of the material.

Resumo de dissertações e teses: a estrutura composicional à luz da Análise Textual dos Discursos

This doctoral dissertationproposes the description, interpretation and analysis of the compositional structure of thesis and dissertation abstracts, with regard to the linguistic mechanisms that evidence text zones of different typological sequences, such as those of the text plan. Along these lines, the research problem was developed from the notion of compositional structure (sequences and text plans), as one of the levels or plans of text analysis, according to the theoretical framework proposed by Jean-Michel Adam (2011a). The main objective of this study was to recognize how the compositional structure, of thesis and dissertation abstracts, is achieved, with respect to text units and the global organization of this text category. The hypothesis posed in this research posits that specific informational text composition categories of abstracts are necessary to process the representation of the original text and the way in which it makes its meaning. Subsequently, this study is based on the theoretical and methodological framework of Text Linguistics (TL) and, above all, Textual Discourse Analysis (TDA), as we endeavor to understand the organizational structure of abstracts from both a linguistic and textual perspective. This structure involves the text plan of abstracts, with respect to their communicative purpose, i.e, the sharing of scientific information in its standard textual form. Thus, the development of this study, from a theoretical and methodological perspective, is based on the theoretical and descriptive premises from TDA (ADAM, 2011a, 2012; PASSEGGI et al., 2010), and also from TL (BEAUGRANDE; DRESSLER, (2012 [1981]); COSERIU; LAMAS (2010); MARCUSCHI, 2009 [1983]; FÁVERO; KOCH, 1994;KOCH, 2006; BENTES, 2004; BENTES; LEITE, 2010), within the field of text studies. The methodology of this study relies on empirical, documental research, which is qualitative, and adopts a descriptive and interpretive approach. From the empirical perspective, our objective is to understand the problems pertaining to the textual composition of abstracts, aiming to elucidate them in light of the theoretical and methodological framework previously mentioned. The corpus of the analysis is comprised of seven abstracts designated for systematic data collection. These texts, written between 2004 and 2011,were selected from Master’s theses and Doctoral dissertations in their electronic version, from the graduate program at the Federal University of Rio Grande do Norte. A thorough review of the literature reveals a clear fluctuation in the terminology of the concept, ‘abstract’. The results of the analysis revealed that the abstracts, which comprise the corpus of analysis in this study, in general, present typological heterogeneity, while the text plan remains fixed. Finally, the new knowledge gained in this research contributes both to the understanding of the compositional structure of abstracts as well as their production.

Um olhar sobre o patrimônio histórico-arquitetônico de Assú/RN: análise com base na percepção dos usuários e no ponto de vista técnico

This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry